2AIKG-RUGGEDRUGGED

Assure Rugged Validator Installation Guide Document Number: DPU-00085 Revision: 1.0 Revision Date: 05 Jan 2023 The information contained in this document is copyright and may not be reproduced, stored in a retrieval system, or transmitted in any form or by any means in whole or in part without the express written consent of Vix IP Pty Ltd. This material is also confidential and may not be disclosed in whole or part to any third party nor used in any manner whatsoever other than for a purpose expressly consented to by Vix IP Pty Ltd in writing. DPU-00085 Revision 1.0 Page 3 of 45 Document History REVISION REVISION DATE DESCRIPTION AUTHOR 0.1 19 Apr 2022 Initial Draft. Carrie Huang 0.2 02 May 2022 Addressed review comments: Minor wording adjustments; Clarified some instructions. Carrie Huang 0.3 09 Jun 2022 Added rear cover opening instructions to obtain access to SAM/SIM card slots. Carrie Huang 0.4 06 Sep 2022 Added FCC & ISED compliance statements; Removed GPS; Removed GPIOs; Removed multiprotocol; Added installation procedure overview and BoM; Updated rear cover screw type in various photos; Updated pole kit information; Replaced CKIT0142 with KIT1000 and added more installation instructions; Added rubber boot fitting instructions; Added hood installation, the hood is now a part of the installation kit but not the device itself; Added quality assurance and testing section; Confirmed ferrites should be added in installation but not provided by VIX; Added adaptor kit VIX part numbers for using PCP pole. Carrie Huang 0.5 19 Oct 2022 Added more info and photos for the PCP pole mounting; Changed Ethernet cable to shielded; Added ferrite installation. Carrie Huang 1.0 05 Jan 2023 Added torque settings for cradle installation; Released for use. Carrie Huang DPU-00085 Revision 1.0 Page 4 of 45 Contents 1 Safety Precautions .................................................................................................... 7 1.1 Warnings and Cautions............................................................................................................................. 7 1.2 EMC and Safety Standards Applied ......................................................................................................... 7 1.2.1 FCC RF Radiation Exposure Statement ................................................................................................... 7 1.2.2 FCC Compliance Statement ..................................................................................................................... 8 1.2.3 ISED Compliance Statement .................................................................................................................... 8 1.3 Safety ........................................................................................................................................................ 9 2 Introduction .............................................................................................................. 10 2.1 Purpose ................................................................................................................................................... 10 2.2 Scope ...................................................................................................................................................... 10 2.3 References .............................................................................................................................................. 11 2.4 Glossary/Acronyms ................................................................................................................................. 11 3 Installation Overview ............................................................................................... 12 3.1 System Architecture ................................................................................................................................ 12 3.2 Power Supply .......................................................................................................................................... 12 3.3 Installation Example ................................................................................................................................ 13 3.4 Installation Procedure and BoM .............................................................................................................. 13 4 Accessories ............................................................................................................. 15 4.1 SAMs / SIM / uSD ................................................................................................................................... 15 4.2 Back-up Battery ...................................................................................................................................... 16 4.3 1-Wire Assembly (CBL0429) .................................................................................................................. 17 5 Wiring and Terminations ......................................................................................... 18 5.1 Example Wiring Diagram ........................................................................................................................ 18 5.2 Connector Termination ........................................................................................................................... 20 5.3 Cable Recommendations ....................................................................................................................... 21 5.4 Power Supply Cable ............................................................................................................................... 22 5.4.1 Requirements .......................................................................................................................................... 22 5.4.2 Hierarchy for Power Supply .................................................................................................................…

Text truncated - open the document above for the full version.

Assure Rugged Validator Model Variations Declaration DPU-00158 Revision 1.0 Page 1 of 1 Assure Rugged Validator Model Variations Declaration We hereby confirm that the test report covers all the model numbers fall under RUGGED-****-*** Where the detailed explanation of the model number breakdown is as follows: RUGGED - * * * * - * * * 1 2 3 4 5 6 1: Defines the product name, in this case RUGGED for Rugged Validator. 2: Defines the mechanical configuration of the device. There is currently only one configuration available: A: Pole Mount 3: Defines the type of memory for the device. There is currently only one memory type available: A: 1GB DDR3L SDRAM and 2GB NAND Flash 4: Defines the optional features (Bar Code & QR Reader / 4G & 3G & 2G / 2.4GHz WiFi & Bluetooth) available in the model. Currently the following options are available: A: With Bar Code & QR Reader B: No added optional features (but no Touch Screen) C: With Bar Code & QR Reader / 4G & 3G & 2G / 2.4GHz WiFi & Bluetooth D: No added optional features (Standard model) E: With 2.4GHz WiFi & Bluetooth F: With 4G & 3G & 2G / 2.4GHz WiFi & Bluetooth G: With Bar Code & QR Reader / 2.4GHz WiFi & Bluetooth Note: Different combinations may be added in the future, but their included features will still be within the ones available in the fully featured C variant listed above (i.e. Touch Screen / Bar code & QR reader / 4G & 3G & 2G / 2.4GHz WiFi & Bluetooth). 5: Defines the aesthetics and artwork for the device. Currently the following options are available: A: Standard Front Casing / Standard Rear Casing / Standard Glass Artwork B: Standard Front Casing / Standard Rear Casing / Custom-01 Glass Artwork Note: Different options may be added in the future based on customer requirement. 6: Defines the device version number. R01: Revision 1 The device used for the compliance testing is the RUGGED-AACA-R01 model, which covers all the optional electronics peripheral features that are available to the Rugged Validator. There may be different model variants added in the future, but as per mentioned in the above detailed part number explanation, their optional electronics peripheral features will still be within the options included in the RUGGED-AACA-R01 model. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, ____________________ Jiali (Carrie) Huang Senior Hardware Engineer Vix Technology (Aust) Pty Ltd Level 1, 50 St Georges Tce Perth, 6000 Australia [email protected] +61 8 6180 4600 Date: _______________ 21/11/2022

C5266091_X8_Ed.1 1/1 Letter of Authorization Vix Technology (Aust) Pty Ltd Company: Vix Technology (Aust) Pty Ltd Address: Level 1, 50 St Georges Tce Perth, 6000 Australia Product Name: RUGGED Model Number: RUGGED-AACA-R01 FCC Identifier: 2AIKG-RUGGED We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Gino Bertino Date: November 29,2022 Title: Operations Manager Signature of applicant:

C5266091_X10_Ed.1 1/1 Vix Technology (Aust) Pty Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 20 December 2022 Subject: Request for Confidentiality FCC ID: 2AIKG-RUGGED To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality ID Label/Location No No Attestation Statement No No External Photos No Block Diagram Schematics Test Report No No Test Setup Photos No User’s Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) No No SDR Software / Security Info No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld form public view for a period of __180__days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Gino Bertino Title: Operations Manager

Page 1 of 2 FCC ID: 2AIKG-RUGGED IC: 25270-RUGGED Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT EXTERNAL PHOTOS EUT Photo EUT Photo Page 2 of 2 FCC ID: 2AIKG-RUGGED IC: 25270-RUGGED Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo

REV DATE SCALE APP'D CHK'D DRN SHEET DRG No. A4 DIMENSIONS IN MILLIMETERS CORELDRAW (*.CDR) VIX Technology Confidential, ã VIX DPU 2022 BLACK 1) Material: 3M White Tamper-Indicating Label Material Self Adhesive Polyster Film, Notes: 3M#7380. Clear Laminated after Printing.. 2) Registration marks are not printed. 3) Label is white. All the printing is black. No other colour must be used. 12/12/2022 Gino.B Rui.A. 1 : 1 Atul.S. LBL SR NO RATING ASSURE RUGGED 1 OF 1 1 76-0609 LBL1003 PART No. (1) REVDATEDRN BYREVISION DESCRIPTION First Draft ECN 08/06/2022 0 A.S. Example of fully printed label Dimensions 1 12/12/2022 A.S. Updated as per EMC Test Lab recommendations ECN-1326 REV DATE SCALE APP'D CHK'D DRN SHEET DRG No. A4 DIMENSIONS IN MILLIMETERS CORELDRAW (*.CDR) VIX Technology Confidential, ã VIX DPU 2021 BLACK 3M#7380. Clear Laminated after Printing.. Notes: 2) Registration marks are not printed. 1) Material: 3M White Tamper-Indicating Label Material Self Adhesive Polyster Film, 13/07/2022 Gino.B Rui.A. 1 : 1 Atul.S. FCC, AND ESN LABEL ASSURE RUGGED 1 OF 1 0 76-0610 LBL1004 PART No. (1) REVDATEDRN BYREVISION DESCRIPTION First release ECN FCC ID: 2AIKG-RUGGED SIZE: 33 x 22.5 13/07/2022 0.0 A.S. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Contains FCC IDs: QIPPLS83-W, XF6-M15SB Contains IC: 7830A-PLS83W, 8407A-MS15SB ESN: 0190NNNN 33.00 mm 22.50 mm Radius 1.8mm 22.50 mm NNNN:- Hexa decimal number generated by FRAM database Notes: Example of fully Printed Label 22.50 mm Notes: 22.50 mm Label location

Page 1 of 12 FCC ID: 2AIKG-RUGGED IC: 25270-RUGGED Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT INTERNAL PHOTOS EUT Photo EUT Photo Page 2 of 12 FCC ID: 2AIKG-RUGGED IC: 25270-RUGGED Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 3 of 12 FCC ID: 2AIKG-RUGGED IC: 25270-RUGGED Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 4 of 12 FCC ID: 2AIKG-RUGGED IC: 25270-RUGGED Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 5 of 12 FCC ID: 2AIKG-RUGGED IC: 25270-RUGGED Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 6 of 12 FCC ID: 2AIKG-RUGGED IC: 25270-RUGGED Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 7 of 12 FCC ID: 2AIKG-RUGGED IC: 25270-RUGGED Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo NFC Chip Page 8 of 12 FCC ID: 2AIKG-RUGGED IC: 25270-RUGGED Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 9 of 12 FCC ID: 2AIKG-RUGGED IC: 25270-RUGGED Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo NFC Antenna Page 10 of 12 FCC ID: 2AIKG-RUGGED IC: 25270-RUGGED Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 11 of 12 FCC ID: 2AIKG-RUGGED IC: 25270-RUGGED Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 12 of 12 FCC ID: 2AIKG-RUGGED IC: 25270-RUGGED Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo

Page 1 of 21 Report No.: 2209071437EMC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-EMC-ICES003-V1.2 TEST REPORT Product Name: RUGGED Trade Mark: Model No.: RUGGED-AACA-R01 HVIN: RUGGED-AACA-R01 Report Number: 2209071437EMC-1 Test Standards: FCC 47 CFR Part 15 Subpart B ICES-003 Issue 7 FCC ID: 2AIKG-RUGGED Test Result: PASS Date of Issue: December 14, 2022 Prepared for: Vix Technology (Aust) Pty Ltd Level 1, 50 St Georges Tce Perth, 6000 Australia Prepared by: Shenzhen UnionTrust Quality and Technology Co., Ltd. Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China TEL: +86-755-2823 0888 FAX: +86-755-2823 0886 Prepared by: Reviewed by: Kieron Luo Henry Lu Project Engineer Team Leader Approved by: Date: December 14, 2022 Kevin Liang Assistant Manager Page 2 of 21 Report No.: 2209071437EMC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-EMC-ICES003-V1.2 Version Version No. Date Description V1.0 December 14, 2022 Original Page 3 of 21 Report No.: 2209071437EMC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-EMC-ICES003-V1.2 CONTENTS 1. GENERAL INFORMATION ....................................................................................................................................... 4 1.1 CLIENT INFORMATION ........................................................................................................................................ 4 1.2 EUT INFORMATION ............................................................................................................................................ 4 1.2.1 GENERAL DESCRIPTION OF EUT ............................................................................................................ 4 1.2.2 DESCRIPTION OF ACCESSORIES .............................................................................................................. 6 1.3 DESCRIPTION OF SUPPORT UNITS ...................................................................................................................... 6 1.4 TEST LOCATION ................................................................................................................................................. 6 1.5 TEST FACILITY ................................................................................................................................................... 6 1.6 DEVIATION FROM STANDARDS ............................................................................................................................ 7 1.7 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................. 7 1.8 OTHER INFORMATION REQUESTED BY THE CUSTOMER ........................................................................................ 7 1.9 MEASUREMENT UNCERTAINTY ........................................................................................................................... 7 2. TEST SUMMARY ...................................................................................................................................................... 7 3. EQUIPMENT LIST .................................................................................................................................................... 8 4. TEST CONFIGURATION .......................................................................................................................................... 9 4.1 ENVIRONMENTAL CONDITIONS FOR TESTING ........................................................................................................ 9 4.1.1 NORMAL OR EXTREME TEST CONDITIONS ............................................................................................... 9 4.1.2 RECORD OF NORMAL ENVIRONMENT AND TEST SAMPLE ........................................................................... 9 4.2 TEST MODES ..................................................................................................................................................... 9 4.3 TEST SETUP .................................................................................................................................................... 10 4.3.1 FOR RADIATED EMISSIONS TEST SETUP ................................................................................................ 10 4.3.2 FOR CONDUCTED EMISSIONS TEST SETUP ............................................................................................ 11 4.4 SYSTEM TEST CONFIGURATION ........................................................................................................................ 11 5. REFERENCE DOCUMENTS FOR TESTING ......................................................................................................... 12 6. EMC REQUIREMENTS SPECIFICATION .............................................................................................................. 12 6.1 RADIATED EMISSION ........................................................................................................................................ 12 6.2 CONDUCTED EMISSION .................................................................................................................................... 18 APPENDIX 1 PHOTOS OF TEST SETUP ................…

Text truncated - open the document above for the full version.

Page 1 of 2 FCC ID: 2AIKG-RUGGED Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com APPENDIX 1 PHOTOS OF TEST SETUP Radiated emission Test Setup-1 (30 MHz~1 GHz) Radiated emission Test Setup-2 (Above 1 GHz) Page 2 of 2 FCC ID: 2AIKG-RUGGED Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com Conducted Emission Test Setup-3