2AILTCM25Ember Mug 3

Application Declaration QSF21-14-04 Rev 1.4 April 25, 2025 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Ember Technologies, Inc. Address 4607 Lakeview Canyon Rd, #409, Westlake Village, California, United States, 91361 FRN 0025619784 Grantee Code 2AILT FCC ID: 2AILTCM25 Authorized Contact Name Damian Lee Contact Phone 1-857-800-4172 Contact Email [email protected] I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this appli cation, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules. c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that prod uction units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and a gree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP- 100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISE D as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review , certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of t he Anti- Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the d efinition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc. terms and conditions as specified in the TCB Applic ation Form 731 (QSF27-14-01). Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Applicant Signature: Date: 7/2/2026 Print Name: Damian Lee Title: Co President *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

FCC COVERED LIST DECLARATION LETTER Page 1 of 1 Revision 1.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Ember Technologies, Inc. Address 4607 Lakeview Canyon Rd, #409, Westlake Village, California, United States, 91361 FRN 0025619784 Grantee Code 2AILT FCC ID: 2AILTCM25 Authorized Contact Name Damian Lee Contact Phone 1-857-800-4172 Contact Email [email protected] Ember Technologies, Inc. (“the applicant”) certifies: -the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. -as of the date of the filing of the application, the applicant [ is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. -the software to be loaded prior to marketing of the equipment identified above is not “covered” software manufactured by any entity including predecessors, successors, parents, subsidiaries, affiliates or any entity which has rebranded or relabeled the software produced by the entity(ies) identified on the “Covered List”. -the device is not capable of storing or running software listed on the covered list and therefore is inherently compliant. NOTE: Justification/evidence explaining how compliance is met must accompany this letter Link to the Covered List: Covered List Applicant Signature: Date:2-Jul-26 Print Name: Damian Lee Title: Co President *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

1 Ember Technologies Inc. is incorporated in Delaware, USA with register number 47-3287206 whose registered office is at: 4607 Lakeview Canyon Road #409, Westlake Village, CA 91361, USA TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Attention: Application Examiner Re: Certification designating a U.S. agent for service of process pursuant to 47 CFR part §2.911(d)(7) of the FCC rules To whom it may concern, This letter is to certify that Ember Technologies, Inc. / Mr. Damian Lee (“Applicant”) accepts responsibilities to act as its own agent pursuant to 47 CFR part §2.911(d)(7) of the FCC rules for service of process. I consent to the obligation to accept service of process on behalf of the applicant in regard to the FCC ID designated below. I HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Applicant. I further acknowledge the requirement to maintain an agent extends for no less than one year after the termination of all marketing and importation or the conclusion of and commission-related proceeding involving the equipment and agree to immediately notify the FCC and Intertek if there is any change in the status identified above. Applicant Company Name : Ember Technologies, Inc. Contact Name : Damian Lee Address : 4607 Lakeview Canyon Road, Westlake Village, CA 91361 Telephone No : 1-857-800-4172 Email : [email protected] FCC ID : 2AILTCM25 Applicant FRN : 0025619784 Signature: ____________________________________ Date: 06/01/2026

Ember Technologies, Inc. TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: 2AILTCM25 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY（Remark：如下资料需要短期保密请选择天数0，45,90或者180天，注意短期 保密期间产品不能在市场上售卖或者能查到产品已经发布的信息，） Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Damian Lee Title: Co President Signature: On behalf of Company: Ember Technologies, Inc. Telephone: 1-857-800-4172 E-mail: [email protected]

Ember Technologies, Inc. Date:2-Jul-26 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AILTCM25 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Ember Technologies, Inc. This authorization is valid until further written notice from the applicant. Print Name: Damian Lee Title: Co President Signature: On behalf of Company: Telephone: 1-857-800-4172 E-mail: [email protected]

AW, MUG FOOT MARKINGS CM25, 10oz 02.19.26 02.19.26 - Clone of AW-0000190; Update dimensions and artwork; Rev A Ember PN AW-0000200 Revision Global Region A - E M B E R T E C H N O L O G I E S I N C . 1 0 o z • 2 9 5 m l D E S I G N E D I N C A L I F O R N I A C C R X X X Y Y Y Y Y F C C I D : 2 A I L T C M 2 5 I C : 2 1 5 3 2  C M 2 5 I P X 7 1 9 V 2 . 1 A C M 2 5 1 0 801853 M A D E I N C H I N A E M B E R . C O M / P A T E N T S AW, MUG FOOT MARKINGS CM25, 14oz 02.19.26 02.19.26 - Clone of AW-0000190; Update dimensions and artwork; Rev A Ember PN AW-0000194 Revision Global Region A - E M B E R T E C H N O L O G I E S I N C . 1 4 o z • 4 1 4 m l D E S I G N E D I N C A L I F O R N I A C C R X X X Y Y Y Y Y F C C I D : 2 A I L T C M 2 5 I C : 2 1 5 3 2  C M 2 5 I P X 7 1 9 V 2 . 1 A C M 2 5 1 4 801853 M A D E I N C H I N A E M B E R . C O M / P A T E N T S AW, MUG FOOT MARKINGS CM25, 16oz 02.19.26 02.19.26 - Clone of AW-0000190; Update dimensions and artwork; Rev A Ember PN AW-0000201 Revision Global Region A - E M B E R T E C H N O L O G I E S I N C . 1 6 o z • 4 7 3 m l D E S I G N E D I N C A L I F O R N I A C C R X X X Y Y Y Y Y F C C I D : 2 A I L T C M 2 5 I C : 2 1 5 3 2  C M 2 5 I P X 7 1 9 V 2 . 1 A C M 2 5 1 6 801853 M A D E I N C H I N A E M B E R . C O M / P A T E N T S

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600006602 Page: 1 of 10 RF EXPOSURE EVALUATION REPORT Application No.: FYCR2606000066HS Applicant: Ember Technologies, Inc. Address of Applicant: 4607 Lakeview Canyon Rd, #409 Westlake Village California 91361 United States Manufacturer: Ember Technologies, Inc. Address of Manufacturer: 4607 Lakeview Canyon Rd, #409 Westlake Village California 91361 United States Factory: 1. Shenzhen BYD Electronics Co., Ltd. 2. Guangdong Xinbao Electrical Appliances Holdings Co., Ltd 3. Goldtek Technology (Shenzhen) Co., Ltd. Address of Factory: 1. Room 301 of BYD A-4 Building, No. 1 Yan’an Road, Kuichong Street, Dapeng New District, Shenzhen, 518119, Guangdong, China 2. South Zhenghe Road, Leliu Town, Shunde District, 528322 Foshan, Guangdong Sheng, China Factory 1A 3. Room 301, Building 1, F8a District, Foxconn Technology Park, No. 2, Donghuan 2nd Road, Fukang Community, Longhua Street, Longhua, Shenzhen, China Equipment Under Test (EUT): EUT Name: Ember Mug 3 Model No.: CM2510, CM2514, CM2516   Please refer to section 3.2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: FCC ID: Ember 2AILTCM25 Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2026-06-08 Date of Evaluation: 2026-06-18 to 2026-06-25 Date of Issue: 2026-07-02 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600006602 Page: 2 of 10 Revision Record Version Chapter Date Modifier Remark 01 2026-07-02 Original Authorized for issue by: Byron Liang/Project Engineer Tree Zhan/Reviewer Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600006602 Page: 3 of 10 2 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Contents .................................................................................................................................................... 3 3 General Information .................................................................................................................................. 4 3.1 General Description of E.U.T. ............................................................................................................ 4 3.2 Details of E.U.T. ................................................................................................................................. 4 3.3 Separation Distance ........................................................................................................................... 4 3.4 Test Location ...................................................................................................................................... 5 3.5 Test Facility ........................................................................................................................................ 5 3.6 Deviation from Standards ................................................................................................................... 5 3.7 Abnormalities from Standard Conditions ........................................................................................... 5 4 FCC Radiofrequency radiation exposure limits .................................................................................... 6 4.1 Blanket 1 mW Blanket Exemption ...................................................................................................... 6 4.2 MPE-based Exemption ...................................................................................................................... 6 4.3 SAR-based Exemption ....................................................................................................................... 7 4.4 RF Exposure Test Exemptions for Simultaneous Transmission ........................................................ 9 5 Measurement and Calculation ............................................................................................................... 10 6 EUT Constructional Details (EUT Photos) ........................................................................................... 10 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600006602 Page: 4 of 10 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power supply: AC 100-240V 50/60Hz(adapter) Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.0 LE Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: PCB Antenna Antenna Gain: 1.14 dBi TestSoftware: Python27 CMD Power Setting: 4 Remark: The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. Declaration of EUT Family Grouping: Model No.: CM2510, CM2514, CM2516 Only the model CM2514 was tested, since according to the declaration from the applicant, the electrical circuit design, PCB layout, components used and internal wiring and functions were identical for the above models, with only difference on Volume of liquid in the vessel CM25 followed by 10 (10oz), 14 (14oz), or 16 (16oz) 3.3 Separation Distance Minimum test separation distance: 5mm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. Compliance Certification Servi…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZO/2021/9000101 Rev.00 Page: 1 of 17 ANTENNA PASSIVE TEST REPORT Application No. ZO/2021/90001 Applicant Ember Technologies, Inc. Manufacturer Ember Technologies, Inc. Product Name Integrated Device Model No. CM21M Standards ANSI/IEEE Std 149-2008 Date Initial Sample(s) Received 2021/08/30 Testing Start Date 2021/09/01 Testing Finish Date 2021/09/01 Report Issue Date 2021/09/11 * In the configuration tested, the EUT detailed in this report complied with the standards specified above. Prepared by Reviewed by Approved by SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZO/2021/9000101 Rev.00 Page: 2 of 17 Revision Version Report No. Version Date Memo ZO/2021/9000101 00 2021/09/11 Initial creation of report SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZO/2021/9000101 Rev.00 Page: 3 of 17 TABLE OF CONTENTS 1 GENERAL INFORMATION ................................................................................................4 1.1 Testing Laboratory................................................................................................................................ 4 1.2 Details of Applicant .............................................................................................................................. 4 1.3 Details of Manufacturer ....................................................................................................................... 4 1.4 General Description of EUT................................................................................................................... 5 1.5 Test Procedure ..................................................................................................................................... 5 1.1 Test Specification ................................................................................................................................. 6 1.2 Laboratory Environment....................................................................................................................... 6 2 OTA MEASUREMENTS SYSTEM CONFIGURATION ....................................................7 2.1 Test Configuration ................................................................................................................................ 7 3 TEST EQUIPMENT LIST ....................................................................................................8 4 MEASUREMENT UNCERTAINTY ....................................................................................9 5 TEST RESULTS................................................................................................................. 10 6 PATTERN PLOTS ............................................................................................................ 12 6.1 Return Loss ......................................................................................................................................... 12 6.2 VSWR ................................................................................................................................................. 13 6.3 Stimulus ............................................................................................................................................. 14 7 3-D ANTENNA PATTERN .............................................................................................. 15 8 THE EUT AND TEST CONFIGURATION ...................................................................... 16 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZO/2021/9000101 Rev.00 Page: 4 of 17 1 General Information 1.1 Testing Laboratory Test Lab SGS-CSTC Standards Technical Services Co., Ltd. Shenzhe n Branch Address No. 1 Workshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Contact Panta Sun Tel. +86 (0) 755 2601 2053 Fax +86 (0) 755 2671 0594 E-mail [email protected] 1.2 Details of Applicant Applicant’s Name Ember Technologies, Inc. Applicant’s Address 4607 Lakeview Canyon Rd., #500, Westlake Village CA 91361 USA Contact Alicia Mao Tel. +1 626-905-9201 Fax / E-mail [email protected] 1.3 Details of Manufacturer Manufacturer’s Name Ember Technologies, Inc. Manufacturer’s Address 4607 Lakeview Canyon Rd., #500, Westlake Village CA 91361 USA Contact Alicia Mao Tel. +1 626-905-9201 Fax / E-mail [email protected] SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZO/2021/9000101 Rev.00 Page: 5 of 17 1.4 General Description of EUT Device Description: Ember Temperature Control Mug2 Device Manufacturer: Ember Technologies, Inc. Device Model: CM21M Hardware Version: / Software Version: / 1.5 Test Procedure Testing is performed according to the ANSI/IEEE Std 149-2008. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZO/2021/9000101 Rev.00 Page: 6 of 17 1.1 Test Specification Identity Document Title ANSI/IEEE Std 149-2008 IEEE Standard Test Procedures for Antennas 1.2 Laboratory Environment Temperature Min. =19°C，Max. = 25°C Relative humidity Min. =40%，Max. =72% Shield effect 0.7-6GHz > 100dB Ground resistance <0.5Ω SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZO/2021/9000101 Rev.00 Page: 7 of 17 2 OTA Measurements System Configuration 2.1 Test Configuration Great-Circle-Cut method is used to measure the antenna 3D GAIN of EUT in OTA qualified anechoic chamber. Equipment Under Test (EUT) geometry centre vertical projection at the centre of platform, the distance from EUT to measurement antenna is 5m F-1. OTA Measurement System Configuration SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: ZO/2021/9000101 Rev.00 Page: 8 of 17 3 Test Equipment List Type of Equipment Model Number Manufacture Calibration Date Valid Period Network Analyzer E5071C S/N MY46523591 Keysight 2021-04-14 2022-04-13 Quad-Ridge Ho…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600006601 Page: 1 of 72 TEST REPORT Application No.: FYCR2606000066HS Applicant: Ember Technologies, Inc. Address of Applicant: 4607 Lakeview Canyon Rd, #409 Westlake Village California 91361 United States Manufacturer: Ember Technologies, Inc. Address of Manufacturer: 4607 Lakeview Canyon Rd, #409 Westlake Village California 91361 United States Factory: 1. Shenzhen BYD Electronics Co., Ltd. 2. Guangdong Xinbao Electrical Appliances Holdings Co., Ltd 3. Goldtek Technology (Shenzhen) Co., Ltd. Address of Factory: 1. Room 301 of BYD A-4 Building, No. 1 Yan’an Road, Kuichong Street, Dapeng New District, Shenzhen, 518119, Guangdong, China 2. South Zhenghe Road, Leliu Town, Shunde District, 528322 Foshan, Guangdong Sheng, China Factory 1A 3. Room 301, Building 1, F8a District, Foxconn Technology Park, No. 2, Donghuan 2nd Road, Fukang Community, Longhua Street, Longhua, Shenzhen, China Equipment Under Test (EUT): EUT Name: Ember Mug 3 Model No.: CM2510, CM2514, CM2516   Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: Ember FCC ID: 2AILTCM25 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2026-06-08 Date of Test: 2026-06-18 to 2026-06-25 Date of Issue: 2026-07-02 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600006601 Page: 2 of 72 Revision Record Version Chapter Date Modifier Remark 01 2026-07-02 Original Authorized for issue by: Byron Liang/Project Engineer Tree Zhan/Reviewer Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600006601 Page: 3 of 72 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10- 2020+Cor.1-2023 Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Radiated Emissions which fall in the restricted bands ANSI C63.10- 2020+Cor.1-2023 Section 6.10.5 & 11.12 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10- 2020+Cor.1-2023 Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10- 2020+Cor.1-2023 Section 6.6 & 11.12 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Maximum Conducted Output Power ANSI C63.10- 2020+Cor.1-2023 Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10- 2020+Cor.1-2023 Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectral Density ANSI C63.10- 2020+Cor.1-2023 Section 11.10.3 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10- 2020+Cor.1-2023 Section 6.10.4 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10- 2020+Cor.1-2023 Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Declaration of EUT Family Grouping: Model No.: CM2510, CM2514, CM2516 Only the model CM2514 was tested, since according to the declaration from the applicant, the electrical circuit design, PCB layout, components used and internal wiring and functions were identical for the above models, with only difference on Volume of liquid in the vessel CM25 followed by 10 (10oz), 14 (14oz), or 16 (16oz) Compliance Certification Services (Kunshan) Inc. Shenzhen Branch SZCCS-TRF-01 Rev. A/2 Report No.: FYCR260600006601 Page: 4 of 72 3 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Test Summary ........................................................................................................................................... 3 3 Contents .................................................................................................................................................... 4 4 General Information .................................................................................................................................. 6 4.1 Details of E.U.T. ................................................................................................................................. 6 4.2 Description of Support Units .............................................................................................................. 6 4.3 Measurement Uncertainty .................................................................................................................. 6 4.4 Test Location ...................................................................................................................................... 7 4.5 Test Facility ........................................................................................................................................ 7 4.6 Abnormalities from Standard Conditions ........................................................................................... 7 5 Equipment List .......................................................................................................................................... 8 6 Radio Spectrum Technical Requirement ............................................................................................. 11 6.1 Antenna Requirement ...................................................................................................................... 11 6.1.1 Test Requirement: ....................................................................................................................... 11 6.1.2 Conclusion ....…

Text truncated - open the document above for the full version.