2AIOGR-900SR/C CAR

Hereby, RUNLONG TOYS AND CRAFTS FACTORY declare that the radio equipment type R/C CAR is compliance with Directive 2014/53/EU. Operating Frequency Range2410 - 2473 MHz The maximum RF Output Power4.833dBm

RUNLONG TOYS AND CRAFTS FACTORY No .1 Road 5, North of Lianhe Road, Waipu Industrial Zone, Fengxiang Street, Chenghai District, Shantou, Guangdong, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03‐27‐2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AIOGR‐900S [RUNLONG TOYS AND CRAFTS FACTORY] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) (Leo Zhu)

RUNLONG TOYS AND CRAFTS FACTORY No .1 Road 5, North of Lianhe Road, Waipu Industrial Zone, Fengxiang Street, Chenghai District, Shantou, Guangdong, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03‐27‐2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AIOGR‐900S [RUNLONG TOYS AND CRAFTS FACTORY] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Leo Zhu)

RUNLONG TOYS AND CRAFTS FACTORY No .1 Road 5, North of Lianhe Road, Waipu Industrial Zone, Fengxiang Street, Chenghai District, Shantou, Guangdong, China Date: Mar. 27, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AIOGR-900S US Agent – Attestation Statement / Part 2.911(d)(7) [RUNLONG TOYS AND CRAFTS FACTORY] certifies, that as of [Mar. 27, 2023], we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2AIOGR-900S. [RUNLONG TOYS AND CRAFTS FACTORY], accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of [RUNLONG TOYS AND CRAFTS FACTORY] for FCC ID: 2AIOGR-900S. Designated Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company: [RUNLONG TOYS AND CRAFTS FACTORY] Designated Agent: FCC US Agent, LLC Company Representative: [Leo Zhu] Tel: 0754-85884383 Email: [email protected] Designated Agent Representative: Tim Payne Signature: Signature:

RUNLONG TOYS AND CRAFTS FACTORY No .1 Road 5, North of Lianhe Road, Waipu Industrial Zone, Fengxiang Street, Chenghai District, Shantou, Guangdong, China Apr.20, 2023 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID : 2AIOGR-900S Model Number: R-903S, R-901S, R-902S, R-904S, R-905S, R-911S, R-912S, R-913S, R-914S, R-915S, R-921S, R-922S, R-923S, R-924S, R-925S, R-931S, R-932S, R-933S, R-934S, R-935S, R-941S, R-942S, R-943S, R-944S, R-945S, DE82, R-701S, R-702S, R-703S, R-704S, R-705S, R-711S, R-712S, R-713S, R-714S, R-715S, R-751S, R-752S, R-753S, R-754S, R-755S, R-601S, R-602S, R-603S, R-604S, R-611S, R-612S, R-613S, R- 614S, R-110S, R-111S, R-112S, R-120S, R-121S, R-122S, R-761S, R-762S, R-763S, R-764S, R-765S, R-771S, R-772S, R-773S, R-774S, R-775S, R-781S, R-782S, R-783S, R-784S, R-785S, R-791S, R-792S, R-793S, R-794S, R-795S, R-101S, R-102S, R-103S, R-401S, R- 402S, R-403S, R-404S, R-501, R-502, R-511, R-512, R-501S, R-502S, R-504S, R-511S, R-512S, R-521S, R-522S, R-523S, R-524S, R- 524, R-531S, R-532S, R-533S, R-534S To Whom It May Concern: We, The RUNLONG TOYS AND CRAFTS FACTORY hereby declare that the models are identical except the model names and the color of appearance. Except for the different above, no other modification is performed. Sincerely, Signature: Contact person: Leo Zhu

RUNLONG TOYS AND CRAFTS FACTORY No .1 Road 5, North of Lianhe Road, Waipu Industrial Zone, Fengxiang Street, Chenghai District, Shantou, Guangdong, China Agent Authorization Company: RUNLONG TOYS AND CRAFTS FACTORY Address: No .1 Road 5, North of Lianhe Road, Waipu Industrial Zone, Fengxiang Street, Chenghai District, Shantou, Guangdong, China Product Name: R/C CAR Model Number(s): R-903S, R-901S, R-902S, R-904S, R-905S, R-911S, R-912S, R-913S, R-914S, R-915S, R-921S, R-922S, R-923S, R-924S, R-925S, R-931S, R-932S, R-933S, R-934S, R-935S, R-941S, R-942S, R-943S, R-944S, R-945S, DE82, R-701S, R-702S, R-703S, R-704S, R-705S, R-711S, R-712S, R-713S, R-714S, R-715S, R-751S, R-752S, R-753S, R-754S, R-755S, R-601S, R-602S, R-603S, R-604S, R-611S, R-612S, R-613S, R-614S, R-110S, R-111S, R-112S, R-120S, R-121S, R-122S, R-761S, R-762S, R-763S, R-764S, R-765S, R-771S, R-772S, R-773S, R-774S, R-775S, R-781S, R-782S, R-783S, R-784S, R-785S, R-791S, R-792S, R-793S, R-794S, R-795S, R-101S, R-102S, R-103S, R-401S, R-402S, R-403S, R-404S, R-501, R-502, R-511, R-512, R-501S, R-502S, R-504S, R-511S, R-512S, R-521S, R-522S, R-523S, R-524S, R-524, R-531S, R-532S, R-533S, R-534S Product Description: R/C CAR We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2023-04-20 Name: Leo Zhu Company: RUNLONG TOYS AND CRAFTS FACTORY

RUNLONG TOYS AND CRAFTS FACTORY No .1 Road 5, North of Lianhe Road, Waipu Industrial Zone, Fengxiang Street, Chenghai District, Shantou, Guangdong, China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023-03-27 Subject; Request for Confidentiality FCC ID: 2AIOGR-900S To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely Contact person: Leo Zhu

Report No.: AGC12778230303AP03 Page 1 of 8 EXTERNAL PHOTOS All VIEW OF EUT-1 All VIEW OF EUT-2 Report No.: AGC12778230303AP03 Page 2 of 8 All VIEW OF EUT-3 All VIEW OF EUT-4 Report No.: AGC12778230303AP03 Page 3 of 8 All VIEW OF EUT-5 All VIEW OF EUT-6 Report No.: AGC12778230303AP03 Page 4 of 8 All VIEW OF EUT-7 All VIEW OF EUT-8 Report No.: AGC12778230303AP03 Page 5 of 8 All VIEW OF EUT-9 TOP VIEW OF EUT Report No.: AGC12778230303AP03 Page 6 of 8 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC12778230303AP03 Page 7 of 8 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC12778230303AP03 Page 8 of 8 RIGHT VIEW OF EUT ****************************************End of Report*************************************

FCC ID Label Location 20mm&40mm FCC ID: 2AIOGR-900S

Report No.: AGC12778230303AP03 Page 1 of 2 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) ANTENNA CLOSE-UP PHOTO-1 2.4G Antenna 20mm Report No.: AGC12778230303AP03 Page 2 of 2 INTERNAL VIEW OF EUT (FIGURE 1) ****************************************End of Report*************************************

RF EXPOSURE EVALUATION 1. PRODUCT INFORMATION FCC ID 2AIOGR-900S Product Description R/C CAR Model Name R-903S Series Model R-901S, R-902S, R-904S, R-905S, R-911S, R-912S, R-913S, R-914S, R-915S, R-921S, R-922S, R-923S, R-924S, R-925S, R-931S, R-932S, R-933S, R-934S, R-935S, R-941S, R-942S, R-943S, R-944S, R-945S, DE82, R-701S, R-702S, R-703S, R-704S, R-705S, R-711S, R-712S, R-713S, R-714S, R-715S, R-751S, R-752S, R-753S, R-754S, R-755S, R-601S, R-602S, R-603S, R-604S, R-611S, R-612S, R-613S, R-614S, R-110S, R-111S, R-112S, R-120S, R-121S, R-122S, R-761S, R-762S, R-763S, R-764S, R-765S, R-771S, R-772S, R-773S, R-774S, R-775S, R-781S, R-782S, R-783S, R-784S, R-785S, R-791S, R-792S, R-793S, R-794S, R-795S, R-101S, R-102S, R-103S, R-401S, R-402S, R-403S, R-404S, R-501, R-502, R-511, R-512, R-501S, R-502S, R-504S, R-511S, R-512S, R-521S, R-522S, R-523S, R-524S, R-524, R-531S, R-532S, R-533S, R-534S Frequency band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5825GHz Others (SRD: 2.410GHz ~ 2.473GHz) Device category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna gain 0dBi Evaluation applied MPE Evaluation SAR Evaluation 2. PORTABLE DEVICE EVALUATION METHOD AND LIMIT According to §15.247(i) and §1.1307b(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission’s guidelines. See KDB 447498 D01 General RF Exposure Guidance v05, section 4.3.1. The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,16 where  ·f(GHz) is the RF channel transmit frequency in GHz  ·Power and distance are rounded to the nearest mW and mm before calculation17  ·The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 3. MOBILE DEVICE EVALUATION METHOD AND LIMIT Human exposure to RF emissions from mobile devices (47 CFR §2.1091) may be evaluated based on the MPE limits adopted by the FCC for electric and magnetic field strength and/or power density, as appropriate, since exposures are assumed to occur at distances of 20 cm or more from persons. LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE Frequency Range (MHz) E-field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/cm 2 ) Averaging Time |E| 2 , |H| 2 or S (Minutes) 0.3 -- 1.34 614 1.63 (100)* 30 1.34 -- 30 824/f 2.19/f (180/f 2 )* 30 30 -- 300 27.5 0.073 0.2 30 300 -- 1500 -- -- f/1500 30 1500 -- 100,000 -- -- 1.0 30 *Note: 1. f= Frequency in MHz * Plane-wave Equivalent Power Density 2. The averaging time for General Population/Uncontrolled exposure to fixed transmitters is not applicable for mobile and portable transmitters. See 47 CFR §§2.1091 and 2.1093 on source-based time-averaging requirement for mobile and portable transmitters. S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna 4. MEASUREMENT RESULT Test Mode Channel Frequency (MHz) Field Strength (dBμV/m) Max Output power (mW) Calculati on Value (Note 1) Threshold Value GFSK SRD 2473 88.37 0.2060 0.0647 3.0 Note 1: Calculation Value =[(max. power of channel, mW)/(min. test separation distance, mm)] ·[√f(GHz)]. Fox example: 0.2060/5*√2.473=0.0647≤ 3.0 Note 2:Max Power (dBm) = Field Strength of Fundamental (dBuV/m@3m)-95.23 Note 3:Max Power (mW) = 10^ (Max power (dBm)/10) According to KDB447498 D01 V06, threshold at which no SAR required is ≤3.0 for 1-g SAR, separation distance is 5mm, and no simultaneous SAR measurement is required.

Page 1 of 32 FCC Test Report Report No.: AGC12778230303FE04 FCC ID : 2AIOGR-900S APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : R/C CAR BRAND NAME : N/A MODEL NAME : Please see the page 5. APPLICANT : RUNLONG TOYS AND CRAFTS FACTORY DATE OF ISSUE : Mar. 20, 2023 STANDARD(S) TEST PROCEDURE(S) : FCC Part 15 Rules REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC12778230303FE04 Page 2 of 32 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Mar. 20, 2023 Valid Initial Release Report No.: AGC12778230303FE04 Page 3 of 32 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY .................................................................................................................. 5 2. GENERAL INFORMATION .............................................................................................................................. 6 2.1. PRODUCT DESCRIPTION ........................................................................................................................ 6 2.2. TABLE OF CARRIER FREQUENCY .......................................................................................................... 7 3. MEASUREMENT UNCERTAINTY ................................................................................................................... 8 4. DESCRIPTION OF TEST MODES ................................................................................................................... 9 5. SYSTEM TEST CONFIGURATION ................................................................................................................ 10 5.1. CONFIGURATION OF EUT SYSTEM ...................................................................................................... 10 5.2 EQUIPMENT USED IN TESTED SYSTEM ............................................................................................... 10 5.3. SUMMARY OF TEST RESULTS .............................................................................................................. 10 6. TEST FACILITY .............................................................................................................................................. 11 7. RADIATED EMISSION ................................................................................................................................... 12 7.1TEST LIMIT ................................................................................................................................................ 12 7.2. MEASUREMENT PROCEDURE ............................................................................................................. 13 7.3. TEST SETUP............................................................................................................................................ 15 7.4. TEST RESULT .......................................................................................................................................... 16 8. BAND EDGE EMISSION ................................................................................................................................ 22 8.1TEST LIMIT ................................................................................................................................................ 22 8.2. MEASUREMENT PROCEDURE ............................................................................................................. 22 8.3 TEST SETUP............................................................................................................................................. 22 8.4 TEST RESULT ........................................................................................................................................... 22 9. 20DB BANDWIDTH ........................................................................................................................................ 27 9.1. MEASUREMENT PROCEDURE ............................................................................................................. 27 9.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 27 9.3. MEASUREMENT RESULTS .................................................................................................................... 28 10. FCC LINE CONDUCTED EMISSION TEST ................................................................................................ 30 10.1. LIMITS OF LINE CONDUCTED EMISSION TEST ................................................................................ 30 Report No.: AGC12778230303FE04 Page 4 of 32 10.2. BLOCK DIAGRAM OF LINE CONDUCTED EMISSION TEST .............................................................. 30 10.3. PRELIMINARY PROCEDURE OF LINE CONDUCTED EMISSION TEST ........................................... 31 10.4. FINAL PROCEDURE OF LINE CONDUCTED EMISSION TEST .......................................................... 31 10.5. TEST RESULT OF LINE CONDUCTED EMISSION TEST .................................................................... 31 APPENDIX A: PHOTOGRAPHS OF TEST SETUP .......................................................................................... 32 APPENDIX B: PHOTOGRAPHS OF THE EUT ................................................................................................. 32 Report No.: AGC12778230303FE04 Page 5 of 32 1. VERIFICATION OF CONFORMITY Applicant RUNLONG TOYS AND CRAFTS FACTORY Address No .1 Road 5, North of Lianhe Road, Waipu Industrial Zone, Fengxiang Street, Chenghai District, Shantou, Guangdong, China Manufacturer RUNLONG TOYS AND CRAFTS FACTORY Address No .1 Road 5, North of Lianhe Road, Waipu Industrial Zone, Fengxiang Street, Chenghai District, Shantou, Guangdong, China Factory RUNLONG TOYS AND CRAFTS FACTORY Address No .1 Road 5, North of Lianhe Road, Waipu Industrial Zone, Fengxiang Street, Chenghai District, Shantou, Guangdong, China Product Designa…

Text truncated - open the document above for the full version.

Report No.: AGC12778230303AP02 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC12778230303AP02 Page 2 of 2 RF CONDUCTED TEST SETUP ****************************************End of Report*************************************