2AIPFMWRKITMWR-kit

MWR-KIT Printed Matter No. 9839 1712 01 Publication Date 2023-02-15 Valid from Serial No. - Product Instructions MWR-KIT4027502206 WARNING Read all safety warnings and instructions Failure to follow the safety warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference 2 © Atlas Copco Industrial Technique AB - 9839 1712 01 Table of Contents Product Information................................................................................................ 4 General Information.......................................................................................... 4 Safety Signal Words.............................................................................. 4 Warranty................................................................................................ 4 ServAid.................................................................................................. 4 Country of Origin................................................................................... 5 Dimensional Drawings........................................................................... 5 Overview........................................................................................................... 5 Application............................................................................................. 5 Factory port........................................................................................... 5 Reset button.......................................................................................... 5 Service port........................................................................................... 5 LEDs...................................................................................................... 6 SD card.................................................................................................. 7 Technical specification.......................................................................... 7 Environmental........................................................................................ 7 Radio module frequencies..................................................................... 7 Interfaces............................................................................................... 8 Accessories........................................................................................... 8 Installation............................................................................................................... 9 Installation Instructions..................................................................................... 9 Preparations.......................................................................................... 9 Installing the unit.................................................................................... 9 Operation............................................................................................................... 11 Ergonomic Guidelines..................................................................................... 11 Configuration Instructions............................................................................... 11 Web GUI.............................................................................................. 11 Accessing the web GUI....................................................................... 12 Settings page....................................................................................... 12 Scan page........................................................................................... 14 Tools page........................................................................................... 16 Connecting a tool................................................................................. 17 Removing a linked tool........................................................................ 17 Updating the communication channel................................................. 17 Uploading the MWR firmware.............................................................. 18 Updating the MWR firmware............................................................... 18 Deleting the MWR firmware................................................................. 19 Upgrading the MWR-KIT firmware...................................................... 19 Configuring the MWR-KIT system log................................................. 19 Operating Instructions..................................................................................... 20 Executing a tightening operation......................................................... 20 Service................................................................................................................... 21 Maintenance Instructions................................................................................ 21 3 © Atlas Copco Industrial Technique AB - 9839 1712 01 Cables and connection ports............................................................... 21 Troubleshooting.................................................................................................... 22 SD card status: Error...................................................................................... 22 Model unsupported......................................................................................... 22 Service required.............................................................................................. 22 Battery low...................................................................................................... 22 Tool calibration required (date)....................................................................... 22 Tool calibration required (interval).................................................................. 22 Tool calibration required (overloaded)............................................................ 22 Tool hardware error.....................…

Text truncated - open the document above for the full version.

MWR-KIT Printed Matter No. 9839 1723 00 Publication Date 2023-02-15 Valid from Serial No. B4780167 Safety Information MWR-KIT4027502206 WARNING To reduce risk of injury, everyone using, installing, repairing, main- taining, changing accessories on, or working near this tool MUST read and understand these instructions before performing any such task. DO NOT DISCARD - GIVE TO USER 2 © Atlas Copco Industrial Technique AB - 9839 1723 00 Table of Contents Declarations....................................................................................................... 3 EU DECLARATION OF CONFORMITY...................................................... 3 WEEE.......................................................................................................... 3 RF Exposure Statement.............................................................................. 3 Radio interference....................................................................................... 3 Information regarding Article 33 in REACH................................................. 3 FCC and ISED Compliance Statement....................................................... 3 Regional Requirements............................................................................... 5 UK DECLARATION OF CONFORMITY...................................................... 5 Safety.................................................................................................................. 5 Intended Use............................................................................................... 5 Electrical Safety........................................................................................... 5 Signs and Stickers....................................................................................... 6 Useful Information............................................................................................. 6 ServAid........................................................................................................ 6 MWR-KITSafety Information © Atlas Copco Industrial Technique AB - 9839 1723 00 3 Declarations EU DECLARATION OF CONFORMITY We, Atlas Copco Industrial Technique AB, SE-105 23 STOCKHOLM SWEDEN, declare under our sole responsi- bility that the product (with name, type and serial number, see front page) is in conformity with the following Directive(s): 2011/65/EU (RoHS), 2014/53/EU (RED), 2015/863/EU (RoHS amendment) Harmonized standards applied: EN 300220-1 v3.1.1, EN 300220-2 v3.2.1, EN 301489-1 v2.2.3, EN 301489-3 v2.1.1, EN 50581:2012, EN 55032:2015 + AC:2016 + A11:2020 + A1:2020, EN 55035:2017 + A11:2020, EN 61000-3-2:2019 + A1:2021, EN 61000-3-3:2013 + A1:2019 + A2:2021, EN 61010-1, EN 62311:2008 Authorities can request relevant technical information from: Product Compliance Manager, Atlas Copco Industrial Tech- nique AB, SE-105 23 Stockholm Sweden Stockholm, 1 November 2022 Lars Eklöf, Managing Director Signature of issuer WEEE Information concerning Waste of Electrical and Electronic Equipment (WEEE): This product and its information, meets the requirements of the WEEE directive/regulations (2012/19/EU), and must be handled in compliance with the directive/regulations. The product is marked with the following symbol: Products marked with a crossed-out wheeled bin symbol and a single black bar underneath, contain parts that must be han- dled in compliance with the WEEE directive/regulations. The entire product, or the WEEE parts, can be sent to your “Cus- tomer Center” for handling. RF Exposure Statement This portable transmitter has been tested and found to comply with FCC General Population RF Radiation Exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. The antenna used for this device must not be co-located or operating in conjunc- tion with any other antenna or transmitter. Radio interference This is a class A product. In a domestic environment this product may cause radio interference. Information regarding Article 33 in REACH The European Regulation (EU) No. 1907/2006 on Registra- tion, Evaluation, Authorization and restriction of Chemicals (REACH) defines among other things requirements related to communication in the supply chain. The information require- ment applies also to products containing so called Substances of Very High Concern (the “Candidate List”). On 27 June 2018 lead metal (CAS nr 7439-92-1) was added to the Candi- date List. In accordance with the above this is to inform you that certain electrical components in the product may contain lead metal. This is in compliance with current substance restriction legis- lation and based on legit exemptions in the RoHS Directive (2011/65/EU). Lead metal will not leak or mutate from the product during normal use and the concentration of lead metal in the complete product is well below the applicable threshold limit. Please consider local requirements on the disposal of lead at product end of life. FCC and ISED Compliance Statement This device complies with Part 15 of the FCC Rules. Any changes or modifications not expressly approved by the man- ufacturer could void the user ́s authority to operate this de- vice. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device is only in compliance if no changes or modifica- tions are made to the device. The device is in compliance with the requirement for RF ex- posure in the US with a 5 mm separation distance between the user and the device - Atlas Copco recommends a separation distance of 20 cm between the user and the device. The antenna is fixed to the device and no change in antenna or fixation of the antenna is acceptable and such modification is considered to violate the Compliance Statement. FCC Responsible party: Name: Rodney Hill Position:…

Text truncated - open the document above for the full version.

FCB045_00 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless Date: 2/10/2023 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 & 6 29590 Campanillas Málaga, España Certifications concerning “covered” equipment. Section 2.911(d)(5)(i)- (ii) FCC ID: 2AIPFMWRkit We, We, Atlas Copco BLM srl, via G. Pepe,11 – 20037 Paderno Dugnano (Milano) - Italy; certify that: - the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. - as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, __________________________ By: Fabio Beltrame Title: regulatory compliance engineer Company: Atlas Copco BLM srl Telephone: +39(0)299035646 e-mail:[email protected]

FCB046_00 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless Date: 2/10/2023 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 & 6 29590 Campanillas Málaga, España Certification designating a U.S. agent for service of process. As required by section 2.911(d)(7), FCC ID: 2AIPFMWRkit We, Atlas Copco BLM srl, via G. Pepe,11 – 20037 Paderno Dugnano (Milano) - Italy; certify that: ATLAS COPCO 3301 Cross Creek Parkway MI 483 26 Auburn Hills United States Rodney Hill [email protected] Is our designated U.S. agent for service of process and we acknowledge: - our consent to accept service of process in the United States for matters related to the applicable equipment at the physical U.S. address and email address of the designated U.S. agent - the acceptance to maintain an U.S. agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Designated U.S. Agent Sincerely, ________________ By: Fabio Beltrame Title: regulatory compliance engineer Company: Atlas Copco BLM srl Telephone: +39(0)299035646 e-mail:[email protected] We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address stated above. __________________ By: Rodney Hill Title: product marketing manager Company: Atlas Copco Telephone: +1 919 272 7837 e-mail:[email protected]

FCB046_00 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless Date: 2/10/2023 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 & 6 29590 Campanillas Málaga, España Certification designating a U.S. agent for service of process. As required by section 2.911(d)(7), FCC ID: 2AIPFMWRkit We, Atlas Copco BLM srl, via G. Pepe,11 – 20037 Paderno Dugnano (Milano) - Italy, FRN 0024628422; certify that: ATLAS COPCO 3301 Cross Creek Parkway MI 483 26 Auburn Hills United States Rodney Hill [email protected] FRN: 0033411786 Is our designated U.S. agent for service of process and we acknowledge: -our consent to accept service of process in the United States for matters related to the applicable equipment at the physical U.S. address and email address of the designated U.S. agent -the acceptance to maintain an U.S. agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Designated U.S. Agent Sincerely, ________________ By: Fabio Beltrame Title: regulatory compliance engineer Company: Atlas Copco BLM srl Telephone: +39(0)299035646 e-mail:[email protected] We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address stated above. __________________ By: Rodney Hill Title: product marketing manager Company: Atlas Copco Telephone: +1 919 272 7837 e-mail:[email protected]

FCB012_04 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless Date: September 28th, 2022 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 & 6 29590 Campanillas Málaga, España Ref: Confidentiality request for FCC ID: 2AIPFMWRKIT To whom it may concern: Pursuant to §0.457(d)(1)(ii) and §0.459 of the Commission’s Rules (47 C.F.R.) and §552 (b)(4) of the Freedom of Information Act, Atlas Copco BLM srl hereby request requests that a part of the subject FCC application be held confidential to avoid release of sensitive information of the product to the public. For the product stated above, we request that the following information be withheld from public disclose: Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Internal Photos Short Term Permanent Operation Description Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term User’s Manual Short Term Permanent SDR software and security information Permanent Confidentiality: The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to us and provide unjustified benefits to our competitors. Short-Term Confidentiality: We hereby request short-term confidentiality for the product stated above to avoid premature release of sensitive information prior to marketing or release of the product to the public. Release date of short term confidentiality is: 45 days from grant date marked 90 days from grant date marked 135 days from grant date marked 180 days from grant date marked Specific date: We are also aware that we are responsible to notify DEKRA in the event information regarding the product or the product is made available to the public. DEKRA will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By: Fabio Beltrame Title: regulatory compliance engineer Company: Atlas Copco BLM srl Telephone: +39(0)299035646 e-mail: [email protected]

FCB034_00 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless Date: September 28th, 2022 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 & 6 29590 Campanillas Málaga, España Ref: sDoC declaration letter for equipment with FCC ID: 2AIPFMWRKit Pursuant to §15.101 of the Commission’s Rules (47 C.F.R.), Atlas Copco BLM srl hereby declare that the device above mentioned is classified under the following equipment class/classes: JAB Part 15 Class B Digital Device JAD Part 15 Class A Digital Device JAV Other Non-Digital SDoC Devices JBP Part 15 Class B Computing Device/Personal Computer JBC Part 15 Class B Computing Device/Personal Computer CXX Communications Rcvr for use w/ licensed Tx and CBs CRR Superregenerative Receiver CYY Communications Receiver used w/Pt 15 Transmitter HID Part 15 TV Interface Device And will follow the Authorization procedure Supplier’s Declaration of Conformity prior to the initiation of marketing. Sincerely, _________________________ By: Fabio Beltrame Title: regulatory compliance engineer Company: Atlas Copco BLM Telephone: +39(0)299035646 e-mail: [email protected]

FCB011_02 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless Date: 15/2/2023 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 & 6 29590 Campanillas Málaga, España Ref: Agent letter for FCC ID: 2AIPFMWRkit We, ATLAS COPCO BLM srl Via G. Pepe,11 – 20037 Paderno Dugnano (Milan) Italy, hereby authorize Dekra testing and certification srl, Via della Fisica, 20 – 36016 Thiene (Vicenza) ITALY Mr. /Ms. Fabio Carraro, e-mail: [email protected], Phone: +390445367702 to act as our agent in the preparation of this application for equipment certification, including the signing of all documents relating to these matters. The present authorization considers the development of documents on behalf of the client, written under his own letterhead and related to the necessary information to be provided on his behalf to complete the certification process. We also hereby certify that neither we nor any party to this application are subject to a denial of U.S. Federal benefits, which include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862 because of conviction for possession or distribution of controlled substance. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by DEKRA Testing and Certification, S.A.U., still resides with us. This agreement expires one year from the current date. Sincerely, __________________________ By: Fabio Beltrame Title: regulatory compliance engineer Company: Atlas Copco BLM srl Telephone: +39(0)299035646 e-mail: [email protected]

DEKRA Testing and Certification S.r.l. Sede Operativa: Via della Fisica 20, 36016 Thiene (VI), Tel./Fax +39 0445 367702 - [email protected] TRF No. 15-247_HoppingDEKRA Page 1 of 22 Test Report No. R22174501 rev.1.0 TEST REPORT Nr. R22174501 Federal Communication Commission (FCC) Report Reference No. ............... : R22174501 Date of issue: .............................. : 07.10.2022 Total number pages: ................... : 22 Customer name ......................... : Atlas Copco BLM S.r.l. Address ....................................... : Via Guglielmo Pepe, 11 – 20037 Paderno Dugnano (MI) – Italy Test specification: Standards ................................... : KDB 447498 D01 General RF Exposure Guidance v06 Non-standard test method .......... : N/A Test Report Form No. ............... : 15-247_HoppingDEKRA Test Report Form(s) Originator .. : DEKRA Testing and Certification S.r.l. Master TRF ................................. : 2022-10 General disclaimer: The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of DEKRA Testing and Certification S.r.l. (*) Test item description ........... : Gateway between the Power Focus 6000 and the Mechatronic Wrench MWR (*) Trademark .............................. : Atlas Copco (*) Manufacturer .......................... : Atlas Copco AB (*) Model / Type reference .......... : MWR-KIT (*) FCC ID ................................... : 2AIPFMWRKIT (*) Rating(s) ................................ : 100-240 V ~ 50/60 Hz single-phase + earth Report Tested by (name + signature) ..... : C. Panozzo .............................................................. Approved by (name + signature) .................................... : F. Marenda .............................................................. (*) information provided by the customer TRF No. 15-247_HoppingDEKRA Page 2 of 22 Test Report No. R22174501 rev.1.0 1 Summary 1 Summary ........................................................................................................................................... 2 2 Reference standard .......................................................................................................................... 3 3 List of attachments ............................................................................................................................ 3 4 Deviation(s) from test specification ................................................................................................... 3 5 Testing location ................................................................................................................................. 3 6 General description of tested item and testing condition(s) ............................................................. 5 6.1 Photos of the test item ................................................................................................................. 7 7 Verdict summary section .................................................................................................................. 9 8 Test conditions ................................................................................................................................11 8.1 General ......................................................................................................................................11 9 Test results .....................................................................................................................................12 9.1 RF Exposure Analysis ...............................................................................................................12 TRF No. 15-247_HoppingDEKRA Page 3 of 22 Test Report No. R22174501 rev.1.0 2 Reference standard KDB 447498 D01 General RF Exposure Guidance v06 RF exposure procedures and equipment authorization policies for mobile and portable devices 3 List of attachments Attachment 1: Instruments list, measurement uncertainty, judgement of compliance and quality manual references 4 Deviation(s) from test specification None 5 Testing location DEKRA Testing and Certification S.r.l. Via della Fisica, 20 – 36016 Thiene (VI) – Italy Test site facility’s FCC registration number: 182474 Revision index Date Change history 1.0 07.10.2022 -- TRF No. 15-247_HoppingDEKRA Page 4 of 22 Test Report No. R22174501 rev.1.0 Testing and sampling: Date of receipt of test item ....................................................... : 05.09.2022 Testing start date ..................................................................... : 07.10.2022 Testing end date ...................................................................... : 07.10.2022 Sampling procedure ................................................................. : Equipment used for testing was picked up by the customer Internal identification ................................................................ : Adhesive label with the product number P220866 General remarks: This report shall not be reproduced, except in full, without the written approval of DEKRA Testing and Certification S.r.l. The test results presented in this report relate only to the object tested. “(see appended table)": refers to a table appended to the report. Throughout this report a comma is used as the decimal separator. Possible test case verdicts: Test case does not apply to the test object: N/A (Not Applicable) Test object does meet the requirement: P (Pass) Test object does not meet the requirement: F (Fail) Test object does not performed: N/E (Not Executed) Definition of symbols used in this test report: ☒ Indicates that the listed condition, standard or equipment is applicable for this report. ☐ Indicates that the listed condition, standard or equipment is not applicable for this report. TRF No. 15-247_HoppingDEKRA Page 5 of 22 Test Report No. R22174501 rev.1.0 6 General description of tested item and testing condi…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification S.r.l. Sede Operativa: Via della Fisica 20, 36016 Thiene (VI), Tel./Fax +39 0445 367702 - [email protected] Accredited by ACCREDIA according to UNI CEI EN ISO/IEC 17025 accreditation n. 0168 L TRF No. 15-249DEKRA Page 1 of 107 Test Report No. R22174301 rev.1.0 LAB N° 0168 L TEST REPORT Nr. R22174301 Federal Communication Commission (FCC) Report Reference No. ............... : R22174301 Date of issue: .............................. : 07.10.2022 Total number pages: ................... : 107 Customer name ......................... : Atlas Copco BLM S.r.l. Address ....................................... : Via Guglielmo Pepe, 11 – 20037 Paderno Dugnano (MI) – Italy Test specification: Standards ................................... : FCC Rules & Regulations, Title 47:2021 Part 15 paragraph(s): 203, 204, 205, 207, 209, 215 and 249 Non-standard test method .......... : N/A Test Report Form No. ............... : 15-249DEKRA Test Report Form(s) Originator .. : DEKRA Testing and Certification S.r.l. Master TRF ................................. : 2022-10 General disclaimer: The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of DEKRA Testing and Certification S.r.l. (*) Test item description ........... : Gateway between the Power Focus 6000 and the Mechatronic Wrench MWR (*) Trademark .............................. : Atlas Copco (*) Manufacturer .......................... : Atlas Copco AB (*) Model / Type reference .......... : MWR-KIT (*) FCC ID ................................... : 2AIPFMWRKIT (*) Rating(s) ................................ : 100-240 V ~ 50/60 Hz single-phase + earth Report Tested by (name + signature) ..... : C. Panozzo .............................................................. Approved by (name + signature) .................................... : F. Marenda .............................................................. (*) information provided by the customer TRF No. 15-249DEKRA Page 2 of 107 Test Report No. R22174301 rev.1.0 LAB N° 0168 L 1 Summary 1 Summary ........................................................................................................................................... 2 2 Reference standard .......................................................................................................................... 3 3 List of attachments ............................................................................................................................ 3 4 Deviation(s) from test specification ...........................................................................…

Text truncated - open the document above for the full version.