2AITF-BTHS-AS90Wireless Stereo Headphones

Safety and Warnings DE EN FR WARNING! Use of headphones or speakers for extended periods at excessive sound levels may result in permanent hearing loss. Please read safety guidelines below. • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment to an electrical outlet on a different circuit to that which the receiver is connected. • Consult the manufacturer or an experienced radio/TV technician for help. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Avantronics Ltd. is under license. Other trademarks and trade names are those of their respective owners. This product, like other radio devices, emits radio frequency electro- magnetic energy and operates within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reect the consensus of the scientic community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. FCC: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference. Changes or modifications not expressly approved by Avantronics Ltd. will void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: During use • Keep the volume at as low a level as possible. • When increasing volume, please do so gradually. • If you experience ringing in the ears or discomfort while using - discontinue use. • Please note that during prolonged use of headphones or speakers at high volume, your ears may become accustomed to the sound level, which may result in permanent damage to your hearing without any noticeable discomfort. CE Avantronics Ltd. hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full test of the EU declaration of conformity is available at the following internet address: www.avantree.com In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states. Avantronics Limited Luohu District, Shenzhen 518000 China EU Importer: Avantree Limited Watford, WD180 0HQ UK US Importer: Avantree Corporation San Jose, California 95119 USA • Using headphones or speakers will reduce your ability to hear other sounds.Use caution while using your product when you are engaging in any activity that requires your full attention. • If you have a pacemaker or other electrical medical device, please consult your physician before using this product. • This package contains small parts - keep out of reach of children as these parts may pose a choking hazard. This product is not a toy – please do not allow children to play with it. • Never try to dismantle the product yourself, or insert objects into the product enclosure, as this may result in an electric shock. • None of the components can be replaced or repaired by an end user. If any parts of your product require replacement for any reason, please contact Avantree. • Avoid exposing your product to rain, moisture or liquids to protect against damage to the product or injury to yourself. • Keep all products, cords, and cables away from machinery. • Observe all signs and instructions that require an electrical device or RF radio product to be switched off in designated areas such as hospitals, or aircraft. • Discontinue use and contact Avantree. if the product has been dropped or damaged, has a damaged cord or plug, or if the product has been dropped in a liquid. • Never mount or store the product over any airbag deployment area, as serious injury may result when an airbag deploys. • Do not use in areas where there are explosive hazards. • Dispose of the product according to local standards and regulations. • Your product is powered by a rechargeable battery. • The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. • The battery can be charged and discharged hundreds of times, but will eventually wear out. • Unplug your charger from the electrical outlet and from the product when not in use. • Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifespan. • If left unused, a fully charged battery will lose its charge over time. • Leaving the product in hot or cold places, such as in a closed car in the summer and winter, will reduce the capacity and lifespan of the battery. • Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A product with a hot or cold battery may temporarily stop working, even if the battery is fully charged. Battery performance is limited in temperatures below freezing. Using headphones or speakers while operating a vehicle or bicycle may be dangerous, and is illegal in some jurisdictions. Please check your local laws. Use caution while using this product when you are engaging in any activity that requires your full attention. In such cases, turn off your headphones or speaker to avoid being distracted. …

Text truncated - open the document above for the full version.

Safety and Warnings DE EN FR WARNING! Use of headphones or speakers for extended periods at excessive sound levels may result in permanent hearing loss. Please read safety guidelines below. • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment to an electrical outlet on a different circuit to that which the receiver is connected. • Consult the manufacturer or an experienced radio/TV technician for help. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Avantronics Ltd. is under license. Other trademarks and trade names are those of their respective owners. This product, like other radio devices, emits radio frequency electro- magnetic energy and operates within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reect the consensus of the scientic community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. FCC: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference. Changes or modifications not expressly approved by Avantronics Ltd. will void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: During use • Keep the volume at as low a level as possible. • When increasing volume, please do so gradually. • If you experience ringing in the ears or discomfort while using - discontinue use. • Please note that during prolonged use of headphones or speakers at high volume, your ears may become accustomed to the sound level, which may result in permanent damage to your hearing without any noticeable discomfort. CE Avantronics Ltd. hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full test of the EU declaration of conformity is available at the following internet address: www.avantree.com In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states. Avantronics Limited Luohu District, Shenzhen 518000 China EU Importer: Avantree Limited Watford, WD180 0HQ UK US Importer: Avantree Corporation San Jose, California 95119 USA • Using headphones or speakers will reduce your ability to hear other sounds.Use caution while using your product when you are engaging in any activity that requires your full attention. • If you have a pacemaker or other electrical medical device, please consult your physician before using this product. • This package contains small parts - keep out of reach of children as these parts may pose a choking hazard. This product is not a toy – please do not allow children to play with it. • Never try to dismantle the product yourself, or insert objects into the product enclosure, as this may result in an electric shock. • None of the components can be replaced or repaired by an end user. If any parts of your product require replacement for any reason, please contact Avantree. • Avoid exposing your product to rain, moisture or liquids to protect against damage to the product or injury to yourself. • Keep all products, cords, and cables away from machinery. • Observe all signs and instructions that require an electrical device or RF radio product to be switched off in designated areas such as hospitals, or aircraft. • Discontinue use and contact Avantree. if the product has been dropped or damaged, has a damaged cord or plug, or if the product has been dropped in a liquid. • Never mount or store the product over any airbag deployment area, as serious injury may result when an airbag deploys. • Do not use in areas where there are explosive hazards. • Dispose of the product according to local standards and regulations. • Your product is powered by a rechargeable battery. • The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. • The battery can be charged and discharged hundreds of times, but will eventually wear out. • Unplug your charger from the electrical outlet and from the product when not in use. • Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifespan. • If left unused, a fully charged battery will lose its charge over time. • Leaving the product in hot or cold places, such as in a closed car in the summer and winter, will reduce the capacity and lifespan of the battery. • Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A product with a hot or cold battery may temporarily stop working, even if the battery is fully charged. Battery performance is limited in temperatures below freezing. Using headphones or speakers while operating a vehicle or bicycle may be dangerous, and is illegal in some jurisdictions. Please check your local laws. Use caution while using this product when you are engaging in any activity that requires your full attention. In such cases, turn off your headphones or speaker to avoid being distracted. …

Text truncated - open the document above for the full version.

FCC ID:2AITF-BTHS-AS90 FCC ID:2AITF-BTHS-AS90 FCC ID:2AITF-BTHS-AS90 FCC ID:2AITF-BTHS-AS90

FCC ID:2AITF-BTHS-AS90 FCC ID:2AITF-BTHS-AS90 FCC ID:2AITF-BTHS-AS90 FCC ID:2AITF-BTHS-AS90

Label

Label

FCC ID:2AITF-BTHS-AS90 FCC ID:2AITF-BTHS-AS90 NFCAntenna FCC ID:2AITF-BTHS-AS90 FCC ID:2AITF-BTHS-AS90 FCC ID:2AITF-BTHS-AS90 BTAntenna

FCC ID:2AITF-BTHS-AS90 FCC ID:2AITF-BTHS-AS90 NFCAntenna FCC ID:2AITF-BTHS-AS90 FCC ID:2AITF-BTHS-AS90 FCC ID:2AITF-BTHS-AS90 BTAntenna

Shenzhen Huaxia Testing Technology Co., Ltd 1F., Block A of Tongsheng Technology Building,Huahui Road, Dalang Street, Longhua District, Shenzhen, China Telephone: +86-755-26648640 Fax:+86-755-26648637 Website:www.cqa-cert.com Report Template Version: V04 Repor tTemplate Revision Date: 2018-07-06 Test Report The test report is effective only with both signature and specialized stamp, The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CQA, this report can’t be reproduced except in full. Report No. :CQASZ20190901002E-04 Applicant: Avantree Technology Co., Ltd. Address of Applicant:The 4th Floor, Yuepeng Building, No.1019 Jiabin Rd, Luohu District, Shenzhen, China Equipment Under Test (EUT): EUT Name:Wireless Stereo Headphones All Model No.:BTHS-AS90, BTHS-AS90B, BTHS-AS90C, BTHS-AS90M, BTHS-ANC033, BTHS-035 Test Model No.:BTHS-AS90 Brand Name: Avantree FCC ID:2AITF-BTHS-AS90 Standards:47 CFR Part 15, Subpart C Date of Receipt:2019-12-13 Date of Test:2019-12-13 to 2019-12-24 Date of Issue:2019-12-24 Test Result :PASS* *In the configuration tested, the EUT complied with the standards specified above Tested By： (Tom chen) Reviewed By: (Aaron Ma) Approved By: (Jack Ai) . Shenzhen Huaxia Testing Technology Co., Ltd ReportNo.: CQASZ20190901002E-04 Page:2 of 17 1Version Revision History Of Report ReportNo.Version Description Issue Date CQASZ20190901002E-04Rev.01 Initial report 2019-12-24 Shenzhen Huaxia Testing Technology Co., Ltd ReportNo.: CQASZ20190901002E-04 Page:3 of 17 2TestSummary Test ItemTest RequirementTest methodResult Radiated Spurious Emissions 47 CFR Part 15, Subpart C Section 15.205/15.209, RSS-Gen Issue 5 ANSI C63.10 2013PASS Note: The simultaneously transmission mode Shenzhen Huaxia Testing Technology Co., Ltd ReportNo.: CQASZ20190901002E-04 Page:4 of 17 3 Contents Page 1 VERSION................................................................................................................................................................ 2 2 TEST SUMMARY.................................................................................................................................................. 3 3CONTENTS............................................................................................................................................................ 4 4 GENERAL INFORMATION................................................................................................................................. 5 4.1 C LIENTINFORMATION.....................................................................................................................................5 4.2 G ENERALDESCRIPTION OFEUT...................................................................................................................5 4.3 G ENERALDESCRIPTION OFBT..................................................................................................................... 5 4.4 G ENERALDESCRIPTION OFNFC.................................................................................................................. 5 4.5 T ESTENVIRONMENT ANDMODE....................................................................................................................6 4.6 D ESCRIPTION OFSUPPORTUNITS................................................................................................................ 6 4.7 T ESTLOCATION.............................................................................................................................................. 7 4.8 T ESTFACILITY................................................................................................................................................ 7 4.9 S TATEMENT OF THE MEASUREMENT UNCERTAINTY......................................................................................8 4.10 D EVIATION FROMSTANDARDS.......................................................................................................................8 4.11 A BNORMALITIES FROMSTANDARDCONDITIONS...........................................................................................8 4.12 O THERINFORMATIONREQUESTED BY THECUSTOMER...............................................................................8 4.13 E QUIPMENTLIST.............................................................................................................................................9 5 TEST RESULTS AND MEASUREMENT DATA............................................................................................10 5.1 R ADIATEDSPURIOUSEMISSIONS................................................................................................................ 10 5.1.1 Radiated emission below 1GHz.......................................................................................................... 13 5.1.2 Transmitter emission above 1GHz..................................................................................................... 15 6 PHOTOGRAPHS - EUT TEST SETUP............................................................................................................16 6.1 R ADIATEDSPURIOUSEMISSION.................................................................................................................. 16 Shenzhen Huaxia Testing Technology Co., Ltd ReportNo.: CQASZ20190901002E-04 Page:5 of 17 4 General Information 4.1 Client Information Applicant: Avantree Technology Co., Ltd. Address of Applicant: The 4th Floor, Yuepeng Building, No.1019 Jiabin Rd, Luohu District,Shenzhen, China Manufacturer: Avantree Technology Co., Ltd. Address of Manufacturer: The 4th Floor, Yuepeng Building, No.1019 Jiabin Rd, Luohu District,Shenzhen, China 4.2 General Description of EUT Product Name: Wireless Stereo Headphones All Model No.: BTHS-AS90, BTHS-AS90B, BTHS-AS90C, BTHS-AS90M, BTHS- ANC033, BTHS-035 Test Model No.: BTHS-AS90 Trade Mark: Avantree Hardware Version: Rer 2.7 Software Version: BT5.0 USB Cable:98cm(Unshielded) AUX…

Text truncated - open the document above for the full version.

Shenzhen Huaxia Testing Technology Co., Ltd 1F., Block A of Tongsheng Technology Building,Huahui Road, Dalang Street, Longhua District, Shenzhen, China Telephone: +86-755-26648640 Fax:+86-755-26648637 Website:www.cqa-cert.com Report Template Version: V04 Repor tTemplate Revision Date: 2018-07-06 RF Exposure Evaluation Report The test report is effective only with both signature and specialized stamp, The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CQA, this report can’t be reproduced except in full. Report No. :CQASZ20190901002E-03 Applicant: Avantree Technology Co., Ltd. Address of Applicant:The 4th Floor, Yuepeng Building, No.1019 Jiabin Rd, Luohu District,Shenzhen, China Equipment Under Test (EUT): EUT Name:Wireless Stereo Headphones All Model No.:BTHS-AS90, BTHS-AS90B, BTHS-AS90C, BTHS-AS90M, BTHS-ANC033, BTHS-035 Test Model No.:BTHS-AS90 Brand Name: Avantree FCC ID:2AITF-BTHS-AS90 Standards: 47 CFR Part 1.1307 47 CFR Part 1.1310 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt:2019-12-13 Date of Test:2019-12-13 to 2019-12-24 Date of Issue:2019-12-24 Test Result :PASS* *In the configuration tested, the EUT complied with the standards specified above Tested By： (Tom Chen) Reviewed By: (Aaron Ma) Approved By: ( Jack Ai) Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190901002E-03 Page: 2 of 7 1Version Revision History Of Report ReportNo.Version Description Issue Date CQASZ20190901002E-03Rev.01 Initial report 2019-12-24 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190901002E-03 Page: 3 of 7 2 Contents Page 1 VERSION......................................................................................................................................................................2 2CONTENTS..................................................................................................................................................................3 3 GENERAL INFORMATION........................................................................................................................................4 3.1 C LIENTINFORMATION................................................................................................................................................4 3.2 G ENERALDESCRIPTION OFEUT................................................................................................................................4 3.3 G ENERALDESCRIPTION OFBT...................................................................................................................................4 3.4 G ENERALDESCRIPTION OFNFC................................................................................................................................4 4 SAR EVALUATION.....................................................................................................................................................5 4.1 RF E XPOSURECOMPLIANCEREQUIREMENT..............................................................................................................5 4.1.1 Standard Requirement..................................................................................................................................5 4.1.2 Limits................................................................................................................................................................5 4.1.3 EUT RF Exposure..........................................................................................................................................6 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190901002E-03 Page: 4 of 7 3 General Information 3.1 Client Information Applicant: Avantree Technology Co., Ltd. Address of Applicant: The 4th Floor, Yuepeng Building, No.1019 Jiabin Rd, Luohu District,Shenzhen, China Manufacturer: Avantree Technology Co., Ltd. Address of Manufacturer: The 4th Floor, Yuepeng Building, No.1019 Jiabin Rd, Luohu District,Shenzhen, China 3.2 General Description of EUT Product Name: Wireless Stereo Headphones All Model No.: BTHS-AS90, BTHS-AS90B, BTHS-AS90C, BTHS-AS90M, BTHS-ANC033, BTHS-035 Test Model No.: BTHS-AS90 Trade Mark: Avantree Hardware Version: Rer 2.7 Software Version: BT5.0 USB Cable:98cm(Unshielded) AUX Cable:148cm(Unshielded) Product Type:MobilePortableFix Location Power Supply: lithium battery:DC3.7V, Charge by DC5V 3.3 General Description of BT Operation Frequency: 2402MHz~2480MHz Bluetooth Version: V5.0 Modulation Technique: Frequency Hopping Spread Spectrum(FHSS) Modulation Type: GFSK,π/4DQPSK, 8DPSK Transfer Rate:1Mbps/2Mbps/3Mbps Number of Channel: 79 Hopping Channel Type: Adaptive Frequency Hopping systems Test Software of EUT: Blue test 3 (manufacturer declare ) Antenna Type: Integral antenna Antenna Gain: 0.9dBi 3.4 General Description of NFC Operation Frequency:13.56MHz Modulation Type:ASK Antenna Type:Induction coil Antenna Gain:0dBi Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190901002E-03 Page: 5 of 7 4 SAR Evaluation 4.1RF Exposure Compliance Requirement 4.1.1 Standard Requirement According to KDB447498D01 General RF Exposure Guidance v06 4.3.1. Standalone SAR test exclusion considerations Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Exclusion Threshold condition, listed below, is satisfied. 4.1.2 Limits The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)]≤3.0 for 1-g SAR and≤7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation 17 T…

Text truncated - open the document above for the full version.

Shenzhen Huaxia Testing Technology Co., Ltd 1F., Block A of Tongsheng Technology Building,Huahui Road, Dalang Street, Longhua District, Shenzhen, China Telephone: +86-755-26648640 Fax:+86-755-26648637 Website:www.cqa-cert.com Report Template Version: V04 Repor tTemplate Revision Date: 2018-07-06 RF Exposure Evaluation Report The test report is effective only with both signature and specialized stamp, The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CQA, this report can’t be reproduced except in full. Report No. :CQASZ20190901002E-03 Applicant: Avantree Technology Co., Ltd. Address of Applicant:The 4th Floor, Yuepeng Building, No.1019 Jiabin Rd, Luohu District,Shenzhen, China Equipment Under Test (EUT): EUT Name:Wireless Stereo Headphones All Model No.:BTHS-AS90, BTHS-AS90B, BTHS-AS90C, BTHS-AS90M, BTHS-ANC033, BTHS-035 Test Model No.:BTHS-AS90 Brand Name: Avantree FCC ID:2AITF-BTHS-AS90 Standards: 47 CFR Part 1.1307 47 CFR Part 1.1310 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt:2019-12-13 Date of Test:2019-12-13 to 2019-12-24 Date of Issue:2019-12-24 Test Result :PASS* *In the configuration tested, the EUT complied with the standards specified above Tested By： (Tom Chen) Reviewed By: (Aaron Ma) Approved By: ( Jack Ai) Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190901002E-03 Page: 2 of 7 1Version Revision History Of Report ReportNo.Version Description Issue Date CQASZ20190901002E-03Rev.01 Initial report 2019-12-24 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190901002E-03 Page: 3 of 7 2 Contents Page 1 VERSION......................................................................................................................................................................2 2CONTENTS..................................................................................................................................................................3 3 GENERAL INFORMATION........................................................................................................................................4 3.1 C LIENTINFORMATION................................................................................................................................................4 3.2 G ENERALDESCRIPTION OFEUT................................................................................................................................4 3.3 G ENERALDESCRIPTION OFBT...................................................................................................................................4 3.4 G ENERALDESCRIPTION OFNFC................................................................................................................................4 4 SAR EVALUATION.....................................................................................................................................................5 4.1 RF E XPOSURECOMPLIANCEREQUIREMENT..............................................................................................................5 4.1.1 Standard Requirement..................................................................................................................................5 4.1.2 Limits................................................................................................................................................................5 4.1.3 EUT RF Exposure..........................................................................................................................................6 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190901002E-03 Page: 4 of 7 3 General Information 3.1 Client Information Applicant: Avantree Technology Co., Ltd. Address of Applicant: The 4th Floor, Yuepeng Building, No.1019 Jiabin Rd, Luohu District,Shenzhen, China Manufacturer: Avantree Technology Co., Ltd. Address of Manufacturer: The 4th Floor, Yuepeng Building, No.1019 Jiabin Rd, Luohu District,Shenzhen, China 3.2 General Description of EUT Product Name: Wireless Stereo Headphones All Model No.: BTHS-AS90, BTHS-AS90B, BTHS-AS90C, BTHS-AS90M, BTHS-ANC033, BTHS-035 Test Model No.: BTHS-AS90 Trade Mark: Avantree Hardware Version: Rer 2.7 Software Version: BT5.0 USB Cable:98cm(Unshielded) AUX Cable:148cm(Unshielded) Product Type:MobilePortableFix Location Power Supply: lithium battery:DC3.7V, Charge by DC5V 3.3 General Description of BT Operation Frequency: 2402MHz~2480MHz Bluetooth Version: V5.0 Modulation Technique: Frequency Hopping Spread Spectrum(FHSS) Modulation Type: GFSK,π/4DQPSK, 8DPSK Transfer Rate:1Mbps/2Mbps/3Mbps Number of Channel: 79 Hopping Channel Type: Adaptive Frequency Hopping systems Test Software of EUT: Blue test 3 (manufacturer declare ) Antenna Type: Integral antenna Antenna Gain: 0.9dBi 3.4 General Description of NFC Operation Frequency:13.56MHz Modulation Type:ASK Antenna Type:Induction coil Antenna Gain:0dBi Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20190901002E-03 Page: 5 of 7 4 SAR Evaluation 4.1RF Exposure Compliance Requirement 4.1.1 Standard Requirement According to KDB447498D01 General RF Exposure Guidance v06 4.3.1. Standalone SAR test exclusion considerations Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Exclusion Threshold cond…

Text truncated - open the document above for the full version.