2AITN-POWERSTATIONPowerstation

Powerstick.com Inc. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 10/11/24 U.S. Agent Designation Powerstick.com Inc.acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID:2AITN- POWERSTATION): Name and company of U.S. agent:THREE STONES MEDIA LLC Physical U.S. address of agent:1200 Broadway St. APT 329, Los Angeles, CA90015 United States FRN of U.S. agent:0033401761 Email address of U.S. agent:[email protected] THREE STONES MEDIA LLCacknowledges their obligation to accept service of process on behalf of Powerstick.com Inc.. Powerstick.com Inc.with the FRN0025672049accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature John Zhu Powerstick.com Inc. Signature Sijie Zhang CEO THREE STONES MEDIA LLC 48_[model]US_Agent_2.911(d)(7)-U,V05

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communications Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name 2AITN-POWERSTATION Powerstation We, Applicant Company Name: Powerstick.com Inc. Address: 39 Camelot Drive, Ottawa K2G 5W6, Canada Phone: +1-613-230-4840 certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. This includes the cybersecurity and anti-virus software produced or provided by Kaspersky Lab, Inc. We certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2024-10-10 Signature Date Name / Title: John Zhu / Manager Company: Powerstick.com Inc. Address: 39 Camelot Drive, Ottawa K2G 5W6, Canada Phone: +1-613-230-4840 Fax: +1-613-230-2188 Email: [email protected]

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products: FCC ID Model name 2AITN-POWERSTATION Powerstation For the products listed above, we request permanent confidentiality for all applicable exhibits as there are: • the Operational Description • the Block Diagram • the Schematics • the Parts Lists • the Tune Up Information The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2024-10-10 Signature Date Name / Title: John Zhu / Manager Company: Powerstick.com Inc. Address: 39 Camelot Drive, Ottawa K2G 5W6, Canada Phone: +1-613-230-4840 Fax: +1-613-230-2188 Email: [email protected]

Powerstick.com Inc. 39 Camelot Drive, Ottawa K2G 5W6, Canada Date: October 10, 2024 FCC ID: 2AITN-POWERSTATION Model Number: Powerstation To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, Powerstick.com Inc. hereby declare that our product (Powerstation) Model Number: Powerstation meet item 5.2 of KDB 680106v03r01 as follow; Requirements of KDB 680106 D01 Yes / No Description Power transfer frequency is less than 1 MHz Yes The device operates in the frequency range 110.2 KHz - 205 KHz The output power from each transmitting element (e.g., coil) is less than or equal to 15 watts. Yes The maximum output power of the primary coil is 10W. A client device providing the maximum permitted load is placed in physical contact with the transmitter (i.e., the surfaces of the transmitter and client device enclosures need to be in physical contact) Yes Client device is placed directly in contact with the transmitter. Only § 2.1091- Mobile exposure conditions apply (i.e., this provision does not cover § 2.1093-Portable exposure conditions). Yes Mobile exposure conditions only The E-field and H-field strengths, at and beyond 20 cm surrounding the device surface, are demonstrated to be less than 50% of the applicable MPE limit, per KDB 447498, Table 1. These measurements shall be taken along the principal axes of the device, with one axis oriented along the direction of the estimated maximum field strength, and for three points per axis or until a 1/d (inverse distance from the emitter structure) field strength decay is observed. Symmetry considerations may be used for test reduction purposes. The device shall be operated in documented worst-case compliance scenarios Yes The EUT H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Powerstick.com Inc. 39 Camelot Drive, Ottawa K2G 5W6, Canada (i.e., the ones that lead to the maximum field components), and while all the radiating structures (e.g., coils or antennas) that by design can simultaneously transmit are energized at their nominal maximum power. For systems with more than one radiating structure, the conditions specified in (5) must be met when the system is fully loaded (i.e., clients absorbing maximum power available), and with all the radiating structures operating at maximum power at the same time, as per design conditions. If the design allows one or more radiating structures to be powered at a higher level while other radiating structures are not powered, then those cases must be tested as well. For instance, a device may use three RF coils powered at 5 W, or one coil powered at 15 W: in this case, both scenarios shall be tested Yes Only one radiating structure and tested at maximum Output Power Please contact me if you have any question. Sincerely, (Signed) Name/Title: John Zhu / Manager Company: Powerstick.com Inc. Address: 39 Camelot Drive, Ottawa K2G 5W6, Canada Tel: +1-613-230-4840 Fax: +1-613-2302188 E-Mail: [email protected]

Page 1 of 4 FCC ID: 2AITN-POWERSTATION Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity EXTERIOR PHOTOGRAPHS Fig. 1 Fig. 2 Page 2 of 4 FCC ID: 2AITN-POWERSTATION Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Page 3 of 4 FCC ID: 2AITN-POWERSTATION Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6 Page 4 of 4 FCC ID: 2AITN-POWERSTATION Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 7 Fig. 8

Page 1 of 1 FCC ID: 2AITN-POWERSTATION Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity LABEL AND LOCATION (Size: L: 3.5cm x W: 2.5cm) Label Location Powerstation Model: Powerstation FCC ID: 2AITN-POWERSTATION

Page 1 of 4 FCC ID: 2AITN-POWERSTATION Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity INTERIOR PHOTOGRAPHS Fig. 1 Fig. 2 Coil Antenna Page 2 of 4 FCC ID: 2AITN-POWERSTATION Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Page 3 of 4 FCC ID: 2AITN-POWERSTATION Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6 Page 4 of 4 FCC ID: 2AITN-POWERSTATION Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 7 Fig. 8

Page 1 of 13 FCC ID: 2AITN-POWERSTATION Report No.: LCSA09214002EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity RF Exposure Evaluation Report 1. Product Information FCC ID: 2AITN-POWERSTATION Product Name Powerstation Model Number Powerstation Power Supply Wireless Charger Input: 5V3A 9V2A Power: 10W Max Modulation Type ASK Frequency Range 110.2~205.0KHz Antenna Type Coil Antenna Hardware version / Software version / Accessories / Exposure category General population/uncontrolled environment EUT Type Production Unit Device Type Mobile Device 2. Evaluation Method Per KDB 680106 D01 Section 3. RF Exposure Requirements; 1) Wireless power transfer devices must comply with RF exposure requirements for all design configurations in which they can operate. At a minimum, RF exposure must be evaluated for the worst-case scenario, typically when the transmitter, while delivering energy to a client device, is operating at maximum output power. RF exposure compliance for equipment authorization must be determined following the guidance of KDB447498, which includes consideration of the different test requirements for Mobile Device and Portable Device exposure categories, as defined in §§ 2.1091 and 2.1093 of the Rules. 2) The RF exposure limits, as set forth in § 1.1310, do not cover the frequency range below 100 kHz for Specific Absorption Rate (SAR) and below 300 kHz for Maximum Permitted Exposure (MPE). In addition, present limitations of RF exposure evaluation systems prevent an accurate evaluation of SAR below 4 MHz. For these reasons, a specific MPE-based RF Exposure compliance procedure for devices operating in the aforementioned low-frequency ranges has been set in place. This procedure is applicable to Equipment Authorization of all RF devices, thus including, but not limited to, Part 18 and WPT devices. Accordingly, for § 2.1091-Mobile devices, the MPE limits between 100 kHz to 300 kHz are to be considered the same as those at 300 kHz in Table 1 of § 1.1310, that is, 614 V/m and 1.63 A/m, for the electric field and magnetic field, respectively. For § 2.1093-Portable devices below 4 MHz and down to 100 kHz, the MPE limits in § 1.1310 (with the 300 kHz limit applicable all the way down to 100 kHz) can be used for the purpose of equipment authorization in lieu of SAR evaluations. Furthermore, consistent with FCC’s equipment authorization RF exposure guidance, any device (both portable and mobile) operating at frequencies below 100 kHz is considered compliant for the purpose of equipment authorization when the external (unperturbed) temporal peak field strengths do not exceed the following reference levels: 83 V/m for the electric field strength (E) Page 2 of 13 FCC ID: 2AITN-POWERSTATION Report No.: LCSA09214002EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity and 90 A/m for the magnetic field strength (H) These data may be provided through measurements and/or numerical simulations, and for all the positions in space relevant for any possible body exposure. 3) “Large size” probes may prevent the measurement of E- and/or H-fields near the surface of the radiating structure (e.g., a WPT source coil), as in the example shown in Figure 1. If the center of the probe sensing element is located more than 5 mm from the probe outer surface, the field strengths need to be estimated through modeling for those positions that are not reachable. The estimates may be done either via numerical calculation, or via analytic model: e.g., approximated formulas for circular coils, dipoles, etc., may be acceptable if it is shown that the model is applicable for the design parameters considered. A typical example is the use of a quasi-static approximation formula for a low-frequency magnetic field source. These estimates shall include points spaced no more than 2 cm from each other. Thus, in the example of Figure 1, at least the estimates at 0 cm2 and 2 cm are required, while only one point would not be sufficient. In addition, the model needs to be validated through the probe measurements for the two closest points to the device surface, and with 2-cm increments, as indicated in Figure 1. In that example, the same model must also be applied to the 4 cm and 6 cm positions, and then compared with the measured data, for validation purposes. The validation is considered sufficient if a 30% agreement between the model and the (E- and/or H-field) probe measurements is demonstrated. If such a level of agreement cannot be shown, a more accurate model (and/or a smaller probe) shall be used. 4) Part 18 Wireless Power Transfer up to One-Meter Distance. This section applies only to WPT transmitters that, by design, can provide power to a load located at a distance no greater than one meter. This distance shall be measured between the closest points between the transmitter and the receiver enclosure surfaces. For instance, two coils positioned as in Figure 2-a may be operated and considered under the provisions of this section, because both receivers are within one-meter distance from the transmitter. However, the case in Figure 2-b cannot be considered in the same way, and it is treated according to the prescription of Section 5.3. For WPT designs with more than one radiating structure the distance to the load shall be considered as in Figure 3, thus measured between the receiver and the closest transmitting structure. Page 3 of 13 FCC ID: 2AITN-POWERSTATION Report No.: LCSA09214002EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bld…

Text truncated - open the document above for the full version.

东莞市友亿线圈电子科技有限公司 产品规格承认书 Specificaton Approval 客户名称（Customer）: 客户料号（Customer P/N）： 产品类型（Model）： 发行日期（Issue Date）： 文件版本（Document Rev.）： 客户签署 （Customer Signatures） 初审 （Precheck By）: 复审 （Checked By）: 承认 （Approved By）: 敬请签回。如未签回，下订单等同已承认签回！ 我司签署 （Inner Signatures） 部门 （Department）: 工程部 （ED） 品质部 （QC） 业务部 （SD） 核实 （Approvde By）： 黄彬 朱东明 李水安 制作商（Mfrs.）： Dongguan Youyi Coil Electronic Technology Co., Ltd 地址（Add.）： 401, No. 57 Bitao Street, Shijie Town, Dongguan City, Guangdong, China 电话（Tel）： +86-13415878813 邮箱（E-mail）： [email protected] Dongguan Youyi Coil Electronic Technology Co., Ltd Change Change The Detail Version1.0.0 part 1 of 5 更改目录 更改事项 修改前 修改后 修改日期 修改人员 Specifications Reference Designs Version1.0.0 part 2 of 5 Specifications Reference De 产品型号： Model Number 单层发射带孔模组 客户料号： Customer P / N 供应商料号： Supplier P / N 一，外观与尺寸（Appearance Size）：（单位/mm） A 5.3±0.5 B 20.5±0.5 C 37±1 D 35±2 E 3±1 F 4MAX G 1.0±0.3 H 3.0MAX I J K L M N O P Q R S T U V W X Y Z We statement that All measurements were performed radiated and therefore additional antenna gain documentation is not required.

Page 1 of 24 FCC ID: 2AITN-POWERSTATION Report No.: LCSA09214002EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT For Powerstick.com Inc. Powerstation Test Model: Powerstation Prepared for : Powerstick.com Inc. Address : 39 Camelot Drive,Ottawa,Canada,K2G 5W6 Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Shajing Street, Baoan District, Shenzhen, China Tel : (+86)755-82591330 Fax : (+86)755-82591332 Web : www.LCS-cert.com Mail : [email protected] Date of receipt of test sample : September 24, 2024 Number of tested samples : 2 Sample No. : A240923029-1, A240923029-2 Serial number : Prototype Date of Test : September 24, 2024 ~ October 08, 2024 Date of Report : October 09, 2024 Page 2 of 24 FCC ID: 2AITN-POWERSTATION Report No.: LCSA09214002EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT FCC CFR 47 PART 15C Report Reference No. ................. : LCSA09214002EA Date Of Issue ................................. : October 09, 2024 Testing Laboratory Name ............ : Shenzhen LCS Compliance Testing Laboratory Ltd. Address .......................................... : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Shajing Street, Baoan District, Shenzhen, China Testing Location/ Procedure .......... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name ......................... : Powerstick.com Inc. Address .......................................... : 39 Camelot Drive,Ottawa,Canada,K2G 5W6 Test Specification Standard ......................................... : FCC CFR 47 PART 15C Test Report Form No...................... : TRF-4-E-168 A/0 TRF Originator ................................ : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF..................................... : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test Item Description. .................. : Powerstation Trade Mark ..................................... : N/A Test Model ...................................... : Powerstation Power Supply ................................. : Wireless Charger Input: 5V3A 9V2A Power: 10W Max Result ........................................... : Positive Compiled by: Supervised by: Approved by: Jack Liu/Administrator Cary Luo/ Technique principal Gavin Liang/ Manager Page 3 of 24 FCC ID: 2AITN-POWERSTATION Report No.: LCSA09214002EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCSA09214002EA October 09, 2024 Date of issue Test Model.............................. : Powerstation EUT......................................... : Powerstation Applicant............................... : Powerstick.com Inc. Address.................................. : 39 Camelot Drive,Ottawa,Canada,K2G 5W6 Telephone............................... : / Fax.......................................... : / Manufacturer........................ : Powerstick.com Inc. Address................................... : 39 Camelot Drive,Ottawa,Canada,K2G 5W6 Telephone............................... : / Fax.......................................... : / Factory................................... : Powerstick.com Inc. Address................................... : 39 Camelot Drive,Ottawa,Canada,K2G 5W6 Telephone............................... : / Fax.......................................... : / Page 4 of 24 FCC ID: 2AITN-POWERSTATION Report No.: LCSA09214002EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Revision History Report Version Issue Date Revision Content Revised By 000 October 09, 2024 Initial Issue -- Page 5 of 24 FCC ID: 2AITN-POWERSTATION Report No.: LCSA09214002EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity TABLE OF CONTENTS 1. GENERAL INFORMATION ............................................................................................. 6 1.1 Description of Device (EUT) .................................................................................................. 6 1.2 Support equipment List ..................................................…

Text truncated - open the document above for the full version.

Page 1 of 2 FCC ID: 2AITN-POWERSTATION Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Photographs of Test Setup Conducted Emission-AC adapter charge mode Radiated Emission below 30MHz-AC adapter charge mode Page 2 of 2 FCC ID: 2AITN-POWERSTATION Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Radiated Emission below 1GHz-AC adapter charge mode