2AIVCHSBSL13078-WYSMUG V5 mug warmer

Front Page USER MANUAL 제품 사용설명서 SMUG V5_SMUG V5_original USER MANUAL 제품 사용설명서 2 · Please carefully review the provided instructions and take heed of all stated warnings. · Keep the manual in a safe place. · Maintain the operational temperature within the range of 32°F - 113°F / 0 - 45°C. · Use only accessories specified by the manufacturer. · Do not place the SMUG on the pad without any contents and heat it up. · Be sure to use a dry cloth to clean the pad. · Refrain from placing metal or magnetic items like coins, keys, or cards on the pad. · Clean the SMUG by handwashing only; do not use a dishwasher. · Do not attempt to disassemble or reassemble the device unless performed by professional maintenance personnel. · This product is designated for indoor use only and is not intended for outdoor or commercial purposes. Before Use 3 Components Components may change without notice for product function and quality improvement. SmugUSB-C CableUser ManualAdapterPad USER MANUAL 제품 사용설명서 B F D A E C 4 Name of each part and structure Depending on the model, the appearance and printing of the product may differ. Mug Power Indicator Front Indicator Top Indicator Touch Button Sensor Button specialized for the pad displays power on/off status displays heating level status heating and wireless charging status manages heating level and power on/off activates heating mode ModelInputWireless Charge OutputHeating OutputHeating TemperatureSize White Black 104°F ~ 161.6°F 40°C ~ 72°C 12V / 2A 5V / 1A 9V / 1.1A 9V / 1.6A 5W 10W 15W 12V / 2A 24W110L x 110W x 110H (mm) A C B E D F 5 Connection and Usage Usage Instruction about mug heating mode. Sensor button (mug) Pad 1. Connect the USB-C charger to the product. 2. Place the mug in the center of the pad. Ensure the sensor button is pressed down correctly to initiate heating. 3. Adjust the heating temperature by pressing and holding the touch button. Temperature indicator Touch button (on/off) 6 The operational status is conveyed through the LED indicator situated on the front panel of the pad. Operating Condition Power on/off Heating mode Heating level Abnormal conditon Error & Lack of power Signal Top indicator light turns white/red Top indicator lights on Front indicator displays heating level (40 - 72°C) Top indicator signal flashes Top indicator signal flashes Usage 7 Usage The water temperature in the SMUG is consistently maintained within the set range of 104 ~ 161.6°F (40 ~ 72°C). Due to other environmental factors of the mug and the volume of water, there might be some variations in the water temperature. Using a regular mug instead of our specialized product, Smug, will not result in heating. When the Smug is placed on the sensor button and pressed, it will automatically switch to the heating mode. Incompatible with regular mugsSmug (specialized mug) 8 Wireless Charging How to use Ensure the pad is clear of metal objects and refrain from pressing the sensor button to prevent heating. Position a wireless charging smartphone at the center of the pad, and verify the charging status using the top indicator. Wireless Charging Function Pad (Front view) Mobile Phone (side view) (Front) Top Indicator 9 The LED indicator on the front of the pad displays the operational status. Wireless charging begins when the smart device is placed on the pad, regardless of its power on/off status. Wireless Charging Operating Condition Power on/off Wireless charging Abnormal conditon Error & Lack of power Signal Top indicator turns to white/red Top indicator lights on Top indicator signal flashes Top indicator signal flashes 10 No CardNo Electronic ChipNo Metal Place the mobile device in the center of the pad. Check the charging icon displayed on the mobile device for its charg- ing status. For safety, avoid placing metal objects like coins, keys, or cards between the pad and mobile phone, as this could lead to overheating and damage to both the product and the phone. Wireless Charging 11 Troubleshooting Problem The device is not powering on Flashing Signal Possible CausesSolution Connection error The mug is not positioned correctly, causing it to not press the sensor button Properly position the mug at the center of the pad Restore power / Lift the mug and reposition it. Check out the connection condition Power adapter or cable problemReplace the power adapter or cable. PCB failureContact customer serive Use continuously for more than 8 hours. USB cable connection issueReconnect the USB cable Using an incorrect USB cableReplace the USB cable Metal or magnets have been detected Check for any interference from metal or magnets on the pad 12 Safety Information This is to protect the user and prevent losing property. Be sure to read and use the product correctly before use. �Do not use a damaged power cord, plug, or loose outlet. �Do not touch the product, power cord, plug, or outlet with wet hands. �Do not pull on the power cord with excessive force. �Do not bend or damage the power cord. �Do not place the product where there is a possibility of overheating. 1. If the plug is inserted into the USB-C / USB charging terminal, be careful not to apply shock or pressing force to the plug. 2. Do not expose it to high temperatures for an extended period or put it in a microwave. 3. The recommended usage and storage temperature range is 0°C to +45°C (32°F to +113°F). 4. Although it is water-resistant, if the product comes into contact with water, beverages, medicine, cosmetics, sweat, or moisture, do not turn on the power. Clean it with a dry cloth and then have it checked by a service center. (Failure due to product submersion may be subject to a fee and may not be repairable, regardless of the warranty period.) 5. Never disassemble, repair, or modify. (We do not take any responsibility for damage to the product caused by improper use, carelessness, or disassembly.) 6. Do not store the product near magnetic objects such as magnets, TVs, monitors, and speakers. 7. Although it is designe…

Text truncated - open the document above for the full version.

FCC ID: 2AIVCHSBSL13078-WY Fig. 1 Fig. 2 FCC ID: 2AIVCHSBSL13078-WY Fig. 3 Fig. 4 FCC ID: 2AIVCHSBSL13078-WY Fig. 5 Fig. 6 FCC ID: 2AIVCHSBSL13078-WY Fig. 7 Fig. 8 FCC ID: 2AIVCHSBSL13078-WY Fig. 9

_____________________________________________________________________________________________________ LABEL AND LOCATION (Size: L6.0cm x 4.0cm) Label Location

FCC ID: 2AIVCHSBSL13078-WY Fig. 1 Fig. 2 Antenna FCC ID: 2AIVCHSBSL13078-WY Fig. 3 Fig. 4 FCC ID: 2AIVCHSBSL13078-WY Fig. 5

Shenzhen Global Test Service Co.,Ltd. No.7-101 and 8A-104,Building 7 and 8,DCC Cultural and Creative Garden No.98,Pingxin North Road,Shangmugu,Pinghu Street, Longgang District,Shenzhen,Guangdong,China TEST REPOR Report Reference No. .....................: FCC ID ............................................... GTS20230825009-1-2 2AIVCHSBSL13078-WY Compiled by ( position+printed name+signature) .. : File administrators Peter Xiao Supervised by ( position+printed name+signature) .. : Test Engineer Evan Ouyang Approved by ( position+printed name+signature) .. : Manager Jason Hu Date of issue ..................................... : Sep.14, 2023 Representative Laboratory Name . : Shenzhen Global Test Service Co.,Ltd. Address ............................................ : No.7-101 and 8A-104,Building 7 and 8,DCC Cultural and Creative Garden No.98,Pingxin North Road,Shangmugu,Pinghu Street,Longgang District,Shenzhen,Guangdong,China Applicant’s name ............................ : Hurkins Address ............................................ : 10-8, Biseul-ro 447-gil, Okpo-myeon, Dalseong-gun, Daegu, South Korea Test specification ...........................: Standard ........................................... : FCC KDB 680106 D01 Shenzhen Global Test Service Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Global Test Service Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Global Test Service Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .....................: SMUG V5 mug warmer Trade Mark ....................................... : Hurkins Manufacturer .................................... : Hurkins Model/Type reference....................... : D-MS5 List Model ......................................... : N/A Modulation Type ............................... : CW (Continuous Wave) Operation Frequency ........................ : 115-205KHz Ratings ............................................. : Input: DC 12.0V/2.0A Wireless Output: DC 5.0V/1.0A, 5W; DC 9.0V/1.1A, 10W; DC 9.0V/1.6A, 15W; Heating Output: DC 12.0V/2.0A, 24W; Result................................................ : PASS Report No.: GTS20230825009-1-2 Page 2 of 15 T E S T R E P O R T Test Report No. : GTS20230825009-1-2 Sep.14, 2023 ______________________________________________________________________________________________ Date of issue Equipment under Test : SMUG V5 mug warmer Model /Type : D-MS5 Listed Models : N/A Applicant : Hurkins Address : 10-8, Biseul-ro 447-gil, Okpo-myeon, Dalseong-gun, Daegu, South Korea Manufacturer Hurkins Address : 10-8, Biseul-ro 447-gil, Okpo-myeon, Dalseong-gun, Daegu, South Korea Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: GTS20230825009-1-2 Page 3 of 15 Contents 1. S U M M A R Y .................................................................................. 4 1.1. General Remarks ......................................................................................................................................... 4 1.2. Product Description .................................................................................................................................... 4 1.3. Equipment Under Test ................................................................................................................................ 5 1.4. Modifications ............................................................................................................................................... 5 1.5. Address of the test laboratory ................................................................................................................... 5 1.6. Test Facility .................................................................................................................................................. 5 1.7. Statement of the measurement uncertainty ............................................................................................. 6 1.8. TEST STANDARDS ...................................................................................................................................... 6 1.9. Equipments Used during the Test ............................................................................................................. 6 2. T E S T C O N D I T I O N S A N D R E S U L T S .................................................. 7 2.1. Evaluation Method ....................................................................................................................................... 7 2.2. Limit .............................................................................................................................................................. 8 2.3. Test Setup Diagram ..................................................................................................................................... 8 2.4. Measurement Procedure............................................................................................................................. 9 2.5. Equipment Approval Considerations ........................................................................................................ 9 2.6. Symbols ........................................................................................................................................................ 9 2.7. Test Results ............................................................................................................................................... 10 3 . T E S T S E T U P P H O T O S O F T H E E U T ............................................... 12 4. C O N C L U S I O N ..…

Text truncated - open the document above for the full version.

1 1 2 2 3 3 4 4 DD CC BB AA Title NumberRevisionSize A4 Date: 2023/8/31Sheet of File:E:\PDESIGN\..\线圈尺寸图.SchDoc Drawn By: D49.5 D42 50 2.5 3.8 UNIT:mm Hurkins 10-8, Biseul-ro 447-gil, Okpo-myeon, Dalseong-gun, Daegu, South Korea Model:D-MS5 All measurements were performed radiated and therefore additional antenna gain documentation is not required.

Shenzhen Global Test Service Co.,Ltd. No.7-101 and 8A-104,Building 7 and 8,DCC Cultural and Creative Garden No.98,Pingxin North Road,Shangmugu,Pinghu Street, Longgang District,Shenzhen,Guangdong,China TEST REPORT FCC Rules and Regulations Part 15 Subpart C (Section 15.209), ANSI C63.10 Report Reference No. .....................: FCC ID ..............................................: GTS20230825009-1-1 2AIVCHSBSL13078-WY Compiled by ( position+printed name+signature) .. : File administrators Peter Xiao Supervised by ( position+printed name+signature) .. : Test Engineer Evan Ouyang Approved by ( position+printed name+signature) .. : Manager Jason Hu Date of issue ..................................... : Sep.14, 2023 Representative Laboratory Name . : Shenzhen Global Test Service Co.,Ltd. Address ............................................ : No.7-101 and 8A-104,Building 7 and 8,DCC Cultural and Creative Garden No.98,Pingxin North Road,Shangmugu,Pinghu Street,Longgang District,Shenzhen,Guangdong,China Applicant’s name ............................ : Hurkins Address ............................................ : 10-8, Biseul-ro 447-gil, Okpo-myeon, Dalseong-gun, Daegu, South Korea Test specification ...........................: Standard ........................................... : FCC Rules and Regulations Part 15 Subpart C (Section 15.209), ANSI C63.10 Shenzhen Global Test Service Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Global Test Service Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Global Test Service Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .....................: SMUG V5 mug warmer Trade Mark ....................................... : Hurkins Manufacturer .................................... : Hurkins Model/Type reference....................... : D-MS5 List Model ......................................... : N/A Modulation Type ............................... : CW (Continuous Wave) Operation Frequency ........................ : 115-205KHz Ratings ............................................. : Input: DC 12.0V/2.0A Wireless Output: DC 5.0V/1.0A, 5W; DC 9.0V/1.1A, 10W; DC 9.0V/1.6A, 15W; Heating Output: DC 12.0V/2.0A, 24W; Result................................................ : PASS Report No.: GTS20230825009-1-1 Page 2 of 25 T E S T R E P O R T Test Report No. : GTS20230825009-1-1 Sep.14, 2023 ______________________________________________________________________________________________ Date of issue Equipment under Test : SMUG V5 mug warmer Model /Type : D-MS5 Listed Models : N/A Applicant : Hurkins Address : 10-8, Biseul-ro 447-gil, Okpo-myeon, Dalseong-gun, Daegu, South Korea Manufacturer Hurkins Address : 10-8, Biseul-ro 447-gil, Okpo-myeon, Dalseong-gun, Daegu, South Korea Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: GTS20230825009-1-1 Page 3 of 25 Contents 1. T E S T S T A N D A R D S ....................................................................... 4 2. S U M M A R Y .................................................................................. 5 2.1. General Remarks ......................................................................................................................................... 5 2.2. Product Description .................................................................................................................................... 5 2.3. Equipment Under Test ................................................................................................................................ 6 2.4. EUT Exercise Software ............................................................................................................................... 6 2.5. Special Accessories .................................................................................................................................... 6 2.6. External I/O Cable ........................................................................................................................................ 6 2.7. Modifications ............................................................................................................................................... 6 3. T E S T E N V I R O N M E N T ................................................................... 7 3.1. Address of the test laboratory ................................................................................................................... 7 3.2. Test Facility .................................................................................................................................................. 7 3.3. Test Description .......................................................................................................................................... 7 3.4. Statement of the measurement uncertainty ............................................................................................. 7 3.5. Equipments Used during the Test ............................................................................................................. 8 4. T E S T C O N D I T I O N S A N D R E S U L T S .................................................. 9 4.1. AC Power Conducted Emission ................................................................................................................. 9 4.2. Radiated Emission .................................................................................................................................... 11 4.3. Occupied Bandwidth ..................................................................................................…

Text truncated - open the document above for the full version.

FCC ID: 2AIVCHSBSL13078-WY _______________________________________________________________________________________________ 1. TEST SETUP PHOTOGRAPHS 1.1. Photo of Radiated Emissions Measurement Fig. 1 Fig. 2 FCC ID: 2AIVCHSBSL13078-WY _______________________________________________________________________________________________ 1.2. Photo of Conducted Emissions Measurement Fig. 3