2AIWVN301Nanit Pro Baby Monitor

Floor Stand User Guide Guide de l’utilisateur du support de plancher Manual de usuario para el soporte de piso 3 • What’s In The Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 • Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 • Let’s Get Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 • Installation Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 • Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 • Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Table of Contents Watch an install video before trying it yourself: nanit .com/install Limited Warranty: nanit .com/legal/warranty Français à partir de la page 19 Español a partir de la página 35 4 What’s In The Box Nanit Pro Camera 4 Floor Stand Tubes, "Y" Joint and 4 Cord Management Channels 3 Floor Stand Legs U-Bracket and 2 Drywall Screws Free Standing Attachment Joint Power Adapter 5 Safety • WARNING: Strangulation Hazard—Children have STRANGLED in cords . NEVER attempt to use cord without the protective covering . Check protective covering before each use to ensure that the cord is not exposed to your child . Immediately discontinue use if protective covering is damaged or broken . • This device is designed to be used behind or next to a standard crib, in the middle of the long side of the crib . • Adult assembly is required . Keep small parts away from children when assembling . • This product cannot replace adult supervision . Ensure your child’s health by checking on him/her regularly . • This device is designed for indoor use only . • This product and its packaging are not toys . Do not allow children to play with them . • Use only the AC power supply included with your Nanit . • Never plug Nanit in to an outlet which is within reach of your child . 6 Let’s Get Started Download the Nanit app and set up your account . Follow the in-app instructions to set up your Nanit Camera . You can choose to follow the assembly instructions in-app or in this booklet . nanit.com/app 7 Installation Options A You can install your floor stand against the wall, behind the crib (A) . If your crib is not against the wall, you can install the third leg to place the Nanit in a more suitable position (B) . B 8 Assembly – Wall Leaning or Free Standing Assemble stand, top to bottom . Follow the steps starting on the next page . 1 . START END 9 Push together the first segment (A) . Then screw remaining tubes together, followed by the “Y” joint (B) . Screw both legs to “Y” joint (C) . If using the free stand, follow the steps on the next page . AB C Assembly – Wall Leaning or Free Standing 2 . 10 ED If adding the third leg, screw the leg to the attachment joint (D) . Then slide and snap attachment joint into the back of the stand (E) . 3 . Assembly – Free Standing Only 11 4 . Assembly – Wall Leaning or Free Standing Free Standing Put the Nanit stand where it will live . Choose a location where the power outlet is out of your child’s reach . 12 Free Standing Free Standing Decide cord management direction depending on where your power outlet is located (A) . Pull cord to reduce slack and push upwards while tightening (B) . Assembly – Wall Leaning or Free Standing 5 . AB 13 Connect the cord management channels . Assembly - Wall Leaning or Free Standing 6 . 2 3 1 Free Standing 14 Place the Nanit at the planned center of the crib (A) . If using the Wall Leaning option, use U-Bracket to secure the stand 32” from the floor, via adhesive or drywall screws (B) . 7 . 32” AB Assembly - Wall Leaning or Free Standing 15 Assembly - Wall Leaning or Free Standing Plug the power cord into the power adapter, and then plug the adapter to the outlet (A) . Attach the camera (B) . Make sure that the power outlet you use is not within your child’s reach . AB 8 . 16 Pair camera using your Nanit app . nanit.com/app 9 . Assembly - Wall Leaning or Free Standing 17 Push the crib next to the floor stand, and adjust the camera to see the entire crib . Assembly - Wall Leaning or Free Standing 10 . 18 DECLARATION OF CONFORMITY Hereby, UdiSense, Inc . (DBA: Nanit), 244 Fifth Avenue, Suite 2702, New York, NY 10001, declares that the radio equipment Model N301 is in compliance with Directive 2014/53/EU . The full text of the EU declaration of conformity, including device frequency bands and maximum radio-frequency power, is available at the following internet address: https://www .nanit .com/legal/compliance Compliance POWER SUPPLY INFORMATION Input VoltageInput AC frequencyOutput VoltageOutput CurrentOutput Power Average active efficiency Efficiency at 10% load No load power consumption 100-240V50-60Hz5V2 . 1A10 .5W83 .65%80 .60%0 .0033W This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling . Proper disposal and recycling helps protect natural resources, human health and the environment . For more information on disposal and recycling of this product, contact your local municipality, disposal service or the shop where you bought this product . PRODUCT USE WARNING This product is meant for indoor use only . RADIO FREQUENCY (RF) EXPOSURE STATEMENT This equipment should be installed and operated with a minimum distance of 20 cm between the camera and the human body . For full compliance information visit: nanit .com/legal/compliance 19 • Qu’est-ce qui se trouve dans la boîte . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 • S…

Text truncated - open the document above for the full version.

Never miss a moment. Ne ratez jamais un moment. No te pierdas ni un momento. 2 Thank you for purchasing the Nanit Multi-Stand. There’s no better way to make the most of your Nanit than by making it portable. While the Multi-Stand makes your Nanit even more versatile, Insights subscribers should keep in mind that our sleep tracking and analysis only works when Nanit is in your Floor Stand or Wall Mount, as our smart algorithms need a top down view to work their magic. Breathing Motion Monitoring is available* while your camera is in the Multi-Stand. Limited Warranty: nanit.com/legal/warranty * Requires Nanit Breathing Wear and Nanit Insights subscription (sold separately) Merci d’avoir acheté le support réglable Nanit. Il n’y a pas mieux pour tirer le maximum de votre Nanit que d’en faire une caméra portable. Même si le Multi-Stand permet à votre caméra Nanit d’être plus polyvalente, les abonnés à Insights doivent garder à l’esprit que notre suivi et analyse du sommeil ne fonctionne que lorsque Nanit est placée sur votre support de plancher ou votre support mural, puisque nos algorithmes intelligents nécessitent une vue en plongée pour opérer leur magie. La surveillance des mouvements respiratoires est disponible* lorsque votre caméra est placée sur le Multi-Stand. Garantie limitée: nanit.com/legal/warranty *L’abonnement à Nanit Insights et Breathing Wear de Nanit est requis (vendu séparément). Gracias por comprar el Soporte Múltiple de Nanit. No existe una forma mejor para aprovechar al máximo tu Nanit que hacerlo portátil. Si bien el soporte múltiple hace que su Nanit sea incluso más versátil, los suscriptores de Insights deben tener en cuenta que nuestro seguimiento y análisis del sueño solo funcionan cuando el Nanit está en el soporte de suelo o el montaje de pared, ya que nuestros algoritmos inteligentes necesitan de una vista de arriba hacia abajo para hacer su magia. El monitoreo del movimiento de respiración está disponible* mientras su cámara está en el soporte múltiple. Garantía limitada: nanit.com/legal/warranty * Requiere de Nanit Breathing Wear y una suscripción a Nanit Insights (se venden por separado) 3 Instructions / Instrucciones • Remove your Nanit camera from its wall or floor stand • Snap the camera onto the Multi-Stand • Plug your Multi-Stand into the wall • To remove, gently pull the camera from the stand • Retirez votre caméra Nanit de son support mural ou de son pied • Placez-le sur le support réglable • Branchez votre support réglable • Pour l’enlever, retirez doucement l’appareil photo du support • Retire su cámara Nanit de su ‘soporte de pared o piso • Ajústelo en el soporte múltiple • Conecte su soporte múltiple a la pared • Para quitarlo, jale suavemente la cámara del soporte 4 WARNING Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3ft (0.9m) away). This product cannot replace adult supervision. Ensure your child’s health by checking on him/her regularly. This device is designed for indoor use only. This product and its packaging are not toys. Do not allow children to play with them. Use only the AC power supply included with your Nanit. ATTENTION Risque d’étouement: Les enfants peuvent S’ÉTOUFFER avec les câbles. Gardez le câble hors de la portée des enfants (a plus de 0,9 m [3 pieds] de distance). Ce produit ne peut pas remplacer la supervision d’un adulte. Protégez la santé de votre enfant et surveillez l’enfant régulièrement. Ce dispositif est conçu uniquement pour une utilisation intérieure. Ce produit et son emballage ne sont pas des jouets. Ne laissez pas les enfants jouer avec eux. Utilisez uniquement le bloc d’alimentation en courant alternatif fourni avec votre Nanit. ADVERTENCIA Peligro de estrangulamiento: Se han presentado casos donde los niños se han ESTRANGULADO con cables o cuerdas. Mantener los cables o cuerdas fuera del alcance de los niños (más de 3 pies (0.9 mts)). El producto no reemplaza la supervisión de un adulto. Asegúrese de la salud de su hijo vigilándolo regularmente. Este dispositivo está diseñado solo para usar en interiores. Este producto y su empaque no son juguetes. No permita que los niños jueguen con ellos. Solo utilice la alimentación CA incluida con su Nanit. Safety / Sécurité / Seguridad 5 Compliance EU DECLARATION OF CONFORMITY Hereby, UdiSense, Inc. (DBA: Nanit), 244 Fifth Avenue, Suite 2702, New York, NY 10001, declares that the radio equipment Model N301 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity, including device frequency bands and maximum radio-frequency power, is available at the following internet address: https://www.nanit.com/legal/compliance For full compliance information visit: nanit.com/legal/compliance This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service or the shop where you bought this product. PRODUCT USE WARNING This product is meant for indoor use only. RADIO FREQUENCY (RF) EXPOSURE STATEMENT This equipment should be installed and operated with a minimum distance of 20 cm between the camera and the human body. POWER SUPPLY INFORMATION Input Voltage Input AC frequency Output Voltage Output Current Output Power Average active efficiency Efficiency at 10% load No load power consumption 100-240V50-60Hz5V2.1A10.5W83.65%80.60%0.0033W 6 Conformité DÉCLARATION DE CONFORMITÉ DE L’UE UdiSense, Inc. (s/n : Nanit), 244 Fifth Avenue, Suite 2702, New York, NY 10001, déclare par la présente que l’équipement radio modèle N301 est conforme à la directive 2014/53/UE. Le texte complet de la déclaration de conformité de l’UE, comprenant les bandes de fréquence des appareils et la puissance maximale des fréqu…

Text truncated - open the document above for the full version.

Wall Mount User Guide Guide d'utilisation du support mural Manual de usuario para el soporte de pared 3 • What’s In The Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 • Tools You’ll Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 • Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 • Let’s Get Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 • Wall Mount Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 • Safety Kit Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 • Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Table of Contents Français à partir de la page 26 Español a partir de la página 26 Watch an install video before trying it yourself: nanit .com/install Limited Warranty: nanit .com/legal/warranty 4 ScrewsPower Adapter Mounting Template Drywall and Brick Anchors Extra Tape Nanit Pro Camera Elbow Cable Covers Wall Mount with Cable and Straight Cable Covers Mounting Bracket & Level What’s In The Box 5 Screwdriver #2 Phillips Dusting Cloth Pencil Power Drill with 3/16'' (5mm) Drill Bit Tools You’ll Need 6 WARNING: Strangulation Hazard - Children have STRANGLED in cords . NEVER attempt to use cord without the protective covering . Check protective covering before each use to ensure that the cord is not exposed to your child . Immediately discontinue use if protective covering is damaged or broken . • This device is designed to be mounted behind a standard crib and against the wall only . Do not use it elsewhere . • This product cannot replace adult supervision . Ensure your child’s health by checking on him/her regularly . • This device is designed for indoor use only . • This product and its packaging are not toys . Do not allow children to play with them . • Use only the AC power supply included with your Nanit . • Adult assembly required . Keep small parts away from children when assembling . • Never plug Nanit in to an outlet which is within reach of your child . Safety 7 Let’s Get Started Download the Nanit app and set up your account . Follow the in-app instructions to pair your Nanit Camera . Once complete, you can choose to follow the mounting instructions in-app or in this booklet . nanit.com/app 8 Wall Mount Installation Position your crib against the wall where you will mount Nanit . Be sure to check that there are no studs in the center of the crib and that the power outlet is out of your child's reach . Stud-free 1 . 9 2 . Using the included Mounting Template, find the center of the crib and mark the centerline on your wall . Once complete, move the crib out of your way . Crib Center 10 3 . Fold the shaded area of the Mounting Template, step on it to pull straight, then align with the centerline . Once in position, make a mark on your wall at 66” (167cm) . Crib Center 66” (167cm) Mark Here 11 3/16” (5mm) Drill Bit 4 . Drill a 3/16” (5mm) hole in the marked spot . 12 5 . Insert an anchor until flush with wall . Insert a screw into the anchor and screw in halfway. 13 6 . Hang the Mounting Bracket on the screw, then adjust it using the built-in level . Once level, mark the wall through the two bottom holes in the bracket . 14 7 . Remove the Mounting Bracket . Drill 3/16” (5mm) holes in the two marked spots . 15 8 . Insert anchors until flush with wall . 16 9 . Hang the Mounting Bracket back onto the top screw . 17 10 . Insert and tighten first the bottom two screws (A, B), then tighten the top screw (C) . B A C 18 11 . Place Wall Mount over Mounting Bracket and press it flush against the wall (A), Then, slide the Wall Mount down until it clicks (B) . Once the Wall Mount is secured, wipe down the wall below to remove any dust from the drilling process . PRESS SLIDE A B 19 Safety Kit Installation The next pages will guide you through the cable cover installation process . Start out by attaching the first six cable covers to the wall (A) . Once the sixth cable cover has been installed, use the elbow cable cover (B) to make sure the cable runs towards your power outlet, then finish installing the remaining cable covers (C) . Turn to the next page to get started . 1 . BEFOREAFTER STOP after 6 covers A C B 20 2 . Peel the tape backing off the cable cover (A) . Slide the cable cover until the top aligns with the connection point (B) . A B 21 3 . Snap the top of the cable cover in (C) . Gently pull on the cable and make sure the cable is completely tucked in . Firmly adhere the bottom of the cable cover to the wall (D) . SNAP C D 22 Right Left OR 4 . Once the sixth cable cover has been installed, STOP . Choose the left or right elbow cable cover depending on where your power outlet is located . Attach by peeling off the tape backing, tucking the cable inside the cover, and snapping it into place . 23 5 . Now, install the remaining cable covers horizontally along the wall following the same process as before . 24 6 . Snap the Camera into the Wall Mount until it clicks (A), then plug the power adapter into your outlet (B) . Make sure that the power outlet you use is not within your child's reach . Now, head back into the Nanit app to finish setup . AB 25 Compliance EU DECLARATION OF CONFORMITY Hereby, UdiSense, Inc . (DBA: Nanit), 244 Fifth Avenue, Suite 2702, New York, NY 10001, declares that the radio equipment Model N301 is in compliance with Directive 2014/53/EU . The full text of the EU declaration of conformity, including device frequency bands and maximum radio-frequency power…

Text truncated - open the document above for the full version.

https://www.nanit.com/legal/compliance “Nanit Pro” Camera (N301) FCC Compliance Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Change or modifications that are not expressly approved by the manufacturer could void the user’s authority to operate the equipment. FCC RF Exposure Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm during normal operation. This device must not be collocated or operating in conjunction with any other antenna or transmitter. Industry Canada Compliance Notice This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. Restrictions: The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology. The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm from all persons. IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Réglementation IC: Cet appareil est conforme aux normes d’exemption de licence RSS d’Industrie Canada. Son utilisation est soumise aux deux conditions suivantes: 1. Cet appareil ne doit pas provoquer d’interférences, et 2. Cet appareil doit supporter toute interférence,y compris celles pouvant provoquer un fonctionnement non souhaité de l’appareil. NMB-003 5 édition CAN ICES-3(B)/NMB-3(B) L’appareil pourrait cesser d’émettre automatiquement en cas d’absence d’informations à transmettre, ou de panne.II convient cependant de souligner que cela n’est pas destiné à interdire la transmission d’informations de contrôle ou de signalisation de codes répétitifs lorsque la technologie l’exige L’appareil travaille sur la bande de 5 150 à 5 250 MHz, à n’utiliser qu’à l’intérieur, pour réduire les auto-interférences potentielles sur les canaux des systèmes portables via satellite. Déclaration IC sur l’exposition au rayonnement: Cet appareil est conforme aux limites fixées par IC sous RSS-102 pour l’exposition au rayonnement dans un environnement non contrôlé. Cet appareil doit être installé et utilisé avec une distance d’au moins 20 cm entre la source du rayonnement et votre corps.

UdiSense Inc. (DBA: Nanit) 244 Fifth Avenue, Suite #2702 New York, NY 10001 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 09/16/2020 Subject; Request for Confidentiality FCC ID: 2AIWVN301 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Sarah Dorsett Title: CEO 


    

Udisense Inc. DBA: Nanit 244 Fifth Avenue Suite #2702, New York, NY, United States 10001 Date: September 16, 2020 To whom it may concern, Please be notified that I, Sarah Dorsett, have designated Jones Tsai in Sporton International Inc. as the person being responsible for this project and to sign the form 731 and other documentation. Any and all acts carried out by Jones Tsai in Sporton International Inc. on the matters of relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 862. This authorization is limited to the product of as following: FCC ID: 2AIWVN301 If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Sincerely yours, Sarah Dorsett, CEO [email protected] Tel: +1-248-310-8568 


    

Udisense Inc. DBA: Nanit 244 Fifth Avenue Suite #2702, New York, NY, United States 10001 September 24, 2020 Federal Communications Commission Authorization and Evaluation Division Authorization Letter As the designated signatory for FCC applications under the Grantee code 2AIWV (Udisense Inc. DBA: Nanit), I hereby authorize Sarah Dorsett at Udisense Inc. DBA: Nanit to sign all corresponding application documents relating to the processes of FCC Approval. This authorization is limited to FCC ID: 2AIWVN301 Yours sincerely, ________________________________ Name: Claudio Espinal / Title: Director of Accounting Email: [email protected] Tel: + 646 902 1130

Photographs of EUT Report No.: EP081502 Brand Name: Nanit / Model Name: N301 Sporton International (Shenzhen) Inc. Page Number : 1 of 44 FCC ID : 2AIWVN301 Report Issued Date : Sep. 21, 2020 Report Version : Rev. 01 720510 1. External Photograph of EUT Photographs of EUT Report No.: EP081502 Brand Name: Nanit / Model Name: N301 Sporton International (Shenzhen) Inc. Page Number : 2 of 44 FCC ID : 2AIWVN301 Report Issued Date : Sep. 21, 2020 Report Version : Rev. 01 Photographs of EUT Report No.: EP081502 Brand Name: Nanit / Model Name: N301 Sporton International (Shenzhen) Inc. Page Number : 3 of 44 FCC ID : 2AIWVN301 Report Issued Date : Sep. 21, 2020 Report Version : Rev. 01 Photographs of EUT Report No.: EP081502 Brand Name: Nanit / Model Name: N301 Sporton International (Shenzhen) Inc. Page Number : 4 of 44 FCC ID : 2AIWVN301 Report Issued Date : Sep. 21, 2020 Report Version : Rev. 01 Photographs of EUT Report No.: EP081502 Brand Name: Nanit / Model Name: N301 Sporton International (Shenzhen) Inc. Page Number : 5 of 44 FCC ID : 2AIWVN301 Report Issued Date : Sep. 21, 2020 Report Version : Rev. 01 Photographs of EUT Report No.: EP081502 Brand Name: Nanit / Model Name: N301 Sporton International (Shenzhen) Inc. Page Number : 6 of 44 FCC ID : 2AIWVN301 Report Issued Date : Sep. 21, 2020 Report Version : Rev. 01 Photographs of EUT Report No.: EP081502 Brand Name: Nanit / Model Name: N301 Sporton International (Shenzhen) Inc. Page Number : 7 of 44 FCC ID : 2AIWVN301 Report Issued Date : Sep. 21, 2020 Report Version : Rev. 01 List of Accessory: Specification of Accessory AC Adapter (US) Brand Name Goodwin technology Model Name GW12-050210CU Power Rating I/P: 100-240 Vac, 0.4A; O/P: 5Vdc, 2.1A Multi Stand Brand Name Nanit Model Name Nanit Multi-Stand Floor Stand Brand Name Nanit Model Name Nanit Pro Baby Monitor and Floor Stand Wall Mount Brand Name Nanit Model Name Nanit Pro Baby Monitor and Wall Mount Remark: For accessories equipped with this EUT, please refer to the following photos. 2. Photograph of Accessory Photographs of EUT Report No.: EP081502 Brand Name: Nanit / Model Name: N301 Sporton International (Shenzhen) Inc. Page Number : 8 of 44 FCC ID : 2AIWVN301 Report Issued Date : Sep. 21, 2020 Report Version : Rev. 01 720510 Photographs of EUT Report No.: EP081502 Brand Name: Nanit / Model Name: N301 Sporton International (Shenzhen) Inc. Page Number : 9 of 44 FCC ID : 2AIWVN301 Report Issued Date : Sep. 21, 2020 Report Version : Rev. 01 AC Adapter (US) Photographs of EUT Report No.: EP081502 Brand Name: Nanit / Model Name: N301 Sporton International (Shenzhen) Inc. Page Number : 10 of 44 FCC ID : 2AIWVN301 Report Issued Date : Sep. 21, 2020 Report Version : Rev. 01 Multi Stand Photographs of EUT Report No.: EP081502 Brand Name: Nanit / Model Name: N301 Sporton International (Shenzhen) Inc. Page Number : 11 of 44 FCC ID : 2AIWVN301 Report Issued Date : Sep. 21, 2020 Report Version : Rev. 01 Wall Mount Photographs of EUT Report No.: EP081502 Brand Name: Nanit / Model Name: N301 Sporton International (Shenzhen) Inc. Page Number : 12 of 44 FCC ID : 2AIWVN301 Report Issued Date : Sep. 21, 2020 Report Version : Rev. 01 Floor Stand

Side of the device Label location

Font: Arial 3.85pt Model: N301 Nanit N301 FCC ID:2AIWVN301 IC:21649-N301 CAN ICES-3(B)/NMB-3(B) Assembled in China +1(866)MYNANIT

Photographs of EUT Report No.: EP081502 Brand Name: Nanit / Model Name: N301 Sporton International (Shenzhen) Inc. Page Number : 13 of 44 FCC ID : 2AIWVN301 Report Issued Date : Sep. 21, 2020 Report Version : Rev. 01 720510 3. Internal Photograph of EUT WLAN 2.4G Antenna 1<Tx/Rx> Bluetooth & WLAN 2.4G Antenna 2<Tx/Rx> Photographs of EUT Report No.: EP081502 Brand Name: Nanit / Model Name: N301 Sporton International (Shenzhen) Inc. Page Number : 14 of 44 FCC ID : 2AIWVN301 Report Issued Date : Sep. 21, 2020 Report Version : Rev. 01 Photogra…

Text truncated - open the document above for the full version.