2AIY3-Y2612112.4G AI Programming robot dog

Page 1 of 1 page Company Name: Potpourri Group, Inc. Declaration on model difference We the undersigned hereby confirm that any of our production units bearing the following model numbers are identical in circuitry and electrical, mechanical and physical construction; the only differences are the appearance and model no. The above appearance is for color and silk-screen only. Production name Model no. 2.4G AI Programming robot dog Y261211，4322-YZ5, CQ-796 ◼ Please provide at least 1 sample with difference except specified as above for further evaluation. Production name Trade name Model no. Description Confirmed by(print): John Gagnon Authorized Signature: Date: Jun 2, 2026

SIZE:3.5×0.5CM SIZE:4×1 CM Affixed to the remote control back battery cover below ITEM NO. Y261211 Battery door Transmitter

1 INTERTEK TESTING SERVICES RF Exposure The equipment under test (EUT) is a controller operating at 2.4G Band. The EUT can be powered by DC 3.0V (2 x 1.5V AAA batteries). For more detail information pls. refer to the user manual. Antenna Type: Integral antenna Modulation Type: GFSK Antenna Gain: 0.8dBi Max The normal radiated output power (e.i.r.p) is: -17.0dBm (tolerance: +/- 3dB). The normal conducted output power is -17.8dBm (tolerance: +/- 3dB). According to the KDB 447498 V06: The Maximum peak radiated emission for the EUT is 78.6 dBμV/m at 3m in the frequency 2441MHz The EIRP = [(FS*D) ^2 / 30] mW = -16.63dBm which is within the production variation. The Minimum peak radiated emission for the EUT is 75.6 dBμV/m at 3m in the frequency 2479MHz The EIRP = [(FS*D) ^2 / 30] mW = -19.63dBm which is within the production variation. The maximum conducted output average power specified is -14.8dBm= 0.033mW The source- based time-averaging conducted output power =0.033 mW The SAR Exclusion Threshold Level: = 3.0 * (min. test separation distance, mm) / sqrt(freq. in GHz) = 3.0 * 5 / sqrt (2.479) mW = 9.54 mW Since the source-based time-averaging conducted output power is well below the SAR low threshold level, so the EUT is considered to comply with SAR requirement without testing. FCC ID: 2AIY3-Y261211

Potpourri Group, Inc. TEST REPORT SCOPE OF WORK FCC TESTING– MODEL: Y261211 REPORT NUMBER SZHH02194739-001 ISSUE DATE JUN 8, 2026 PAGES 25 DOCUMENT CONTROL NUMBER FCC ID 249_C © 2017 INTERTEK Intertek Report No.: SZHH02194739-001 This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Service Shenzhen Ltd. Longhua Branch 101, 201, Building B, No. 308 Wuhe Avenue, Zhangkengjing Community GuanHu Subdistrict, LongHua District, Shenzhen, People’s Republic of China Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 Version: 01-November-2017 Page: 1 of 25 FCC ID 249_C Test Report Potpourri Group, Inc. Application for Certification FCC ID: 2AIY3-Y261211 2.4G AI Programming robot dog Model: Y261211 Additional Models: 4322-YZ5, CQ-796 2.4GHz Transmitter Report No.: SZHH02194739-001 We hereby certify that the sample of the above item is considered to comply with the requirements of FCC Part 15, Subpart C for Intentional Radiator, mention 47 CFR [10-1-24] Prepared and Checked by: Approved by: Terry Tang Assistant Supervisor Johnny Wang Project Engineer Date: Jun 8, 2026 Intertek Report No.: SZHH02194739-001 Version: 01-November-2017 Page: 2 of 25 FCC ID 249_C Test Report MEASUREMENT/TECHNICAL REPORT This report concerns (check one:) Original Grant X Class II Change Equipment Type: DXX - Part 15 Low Power Communication Device Transmitter Deferred grant requested per 47 CFR 0.457(d)(1)(ii)? Yes No X If yes, defer until: date Company Name agrees to notify the Commission by: date of the intended date of announcement of the product so that the grant can be issued on that date. Transition Rules Request per 15.37? Yes No X If no, assumed Part 15, Subpart C for intentional radiator − the new 47 CFR [10-1-24 Edition] provision. Report prepared by: Terry Tang Intertek Testing Services Shenzhen Ltd. Longhua Branch 101, 201, Building B, No. 308 Wuhe Avenue, Zhangkengjing Community GuanHu Subdistrict, LongHua District, Shenzhen, People’s Republic of China Tel / Fax: 86-755-8601 6288/86-755-8601 6751 Intertek Report No.: SZHH02194739-001 Version: 01-November-2017 Page: 3 of 25 FCC ID 249_C Test Report Table of Contents 1.0 Summary of Test Result ..................................................................................... 4 2.0 General Description ............................................................................................ 5 2.1 Product Description ............................................................................................ 5 2.2 Related Submittal(s) Grants ............................................................................... 5 2.3 Test Methodology ............................................................................................... 5 2.4 Test Facility ....................................................................................................... 5 3.0 System Test Configuration ................................................................................. 6 3.1 Justification ........................................................................................................ 6 3.2 EUT Exercising Software .................................................................................... 6 3.3 Special Accessories ........................................................................................... 6 3.4 Equipment Modification ...................................................................................... 6 3.5 Measurement Uncertainty .................................................................................. 7 3.6 Support Equipment List and Description ............................................................. 7 4.0 Emission Results ................................................................................................ 8 4.1 Radiated Test Results ........................................................................................ 8 4.1.1 Field Strength Calculation ................................................................................ 8 4.1.2 Radiated Emission Configuration Photograph .................................................. 9 4.1.3 Radiated Emissions ......................................................................................... 9 4.1.4 Transmitter Spurious Emissions .................................................................... 12 5.0 Equipment Photographs ................................................................................... 16 6.0 Product Labelling .............................................................................................. 16 7.0 Technical Specifications ................................................................................... 16 8.0 Instruction Manual ............................................................................................ 16 9.0 Miscellaneous Information ............................................................................... 17 9.1 Bandedge Plot ................................................................................................. 17 9.2 20dB Bandwidth ...................................................................................…

Text truncated - open the document above for the full version.