2AJ9T-MRMetal Reader

01 1.Introduction MR1010 & MR1020 User Manual Version: 1.0 The devices are advances access control readers with 125KHz&13.56MHz RFID technology. It’s an ideal choice for high-security applications. They are attractively designed with IK10 certification which brings better protection. The readers are very powerful, can read many types of cards as below: FrequencyCard Type 125KHz 13.56MHz EM Cards RFID S50/S70 IC Cards 2.Specifications Operation Voltage Standby Current Frequency Card Type Read Range Output Format Operating Temperature Operating Humidity Color Index of Protection Dimension Net Weight Shipping Weight 3.Installation 4.Wiring 5.Connection 6.Programming The readers are equipped with an IR remote control, users can use it to program the Wiegand output format if needed. 6.1 Enter and Exit Program Mode Programming Step Keystroke Combination 1. Enter Program Mode 2. Exit Program Mode Note: Master Code can not be changed. *(Master Code)# (Factory default is 123456) * 6.2 Set Wiegand Format for EM Cards 6.3 Set Wiegand Format for IC Cards 6.4 Reset to Factory Default Programming Step Programming Step Programming Step Keystroke Combination Keystroke Combination Keystroke Combination 1. Enter Program Mode 1. Enter Program Mode 1. Enter Program Mode 3. Exit Program Mode 3. Exit Program Mode 3. Exit Program Mode *(Master Code)# *(Master Code)# *(Master Code)# * * * 1 (26~44) # (Factory default is 26bits) 2. Set Wiegand Format 2. Set Wiegand Format 2. Reset to Factory Default 2. Recognize Card Format Automatically (4byte card output WG34, 7byte card output WG58) OR 3 (26~44, 56, 58) # (Factory default is Wiegand 34 bits) 3 0 # (Apply for WG34 and WG58 only) Note: WG56 is without parity bits, WG58 is with parity bits. Reader Access Controller 5 0 # 7.Function Table Sheet 8.Packing List Read Card External LED Control External Buzzer Control Wiegand Data Output The LED light will turn into Green, and the buzzer sounds a beep, at the meantime, the reader outputs the Wiegand signal When the input voltage for LED is low, the LED will turn into Green When the input voltage for Buzzer is low, the buzzer will sound The Wiegand output is 26~58 bits Name Quantity Reader Manual IR Remote Control Screw Driver Wall Fixing Plugs Self Tapping Screws 1 1 1 1 2 2 9~24V DC ≤50mA 125KHz & 13.56MHz EM & IC 2~6 cm Wiegand 26~58 Bits -40°C~+60°C (-40°F~140°F) 0%~98% RH Silver IK10 and IP66 L105 x W49 x H21(mm) 240g 270g •Drill 2 holes (A, C) on the wall for the screws and one hole for the cable •Knock the rubber bungs to the holes (A, C) •Fix the back cover on the wall with 2 screws •Thread the cable through the cable hole (B) •Attach the unit to the back cover Step3Step2Step1 Color 9~24V DC Function Notes Red Black Green White Brown Yellow Power GND D0 D1 LED Buzzer Ground Data 0 Data 1 Green LED Light Control Buzzer Control 02 03 04 Wall Red Black Green White Brown Yellow +DC GND D0 D1 LED BZ 05 Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.

Rev11/20/07 ZKTECOCO.,LTD. FederalCommunicationsCommission AuthorizationandEvaluationDivision ConfidentialityRequestregardingapplicationforcertificationof FCCID:2AJ9T-MR PursuanttoSections0.457and0.459oftheCommission’sRules,weherebyrequestconfidential treatmentofinformationaccompanyingthisapplicationasoutlinedbelow: ExhibitTypeFileName BlockDiagram,Schematics,Operational Description, BlockDiagram OperationDescription schematicdiagram Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedto thepublic.Thepublicdisclosureofthesematerialsmaybeharmfultotheapplicantandprovide unjustifiedbenefitstoitscompetitors. ZhonglieGe ZKTECOCO.,LTD.

Model I Item Confirmation Letter We ZKTECO CO .. LTD. declare that our product. : Metal Reader and its below model (s) I i tern (s) : MR1010、MR1020、MR200、MR201 are identical on circuitry design, PCB layout, electrical components used, internal wiring and functions with the model/i tern No. : MR1010 which we chose to be tested by EMTEK and only different on appearance color/models Company Chop: ZKTECO CO. Authorized signature Position: Manager WV、1 2.. "IS date Printed name ：ZhonglieGe

ZKTECO CO., LTD. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2020-11-23 SUBJECT: FCC Application for FCC ID:2AJ9T-MR To Whom It May Concern: We, the undersigned, hereby authorize Lisa Wang atEMTEK (SHENZHEN) CO., LTD.on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out byEMTEK (SHENZHEN) CO., LTD.on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section ZhonglieGe/ Engineer ZKTECO CO., LTD.

ExternalPhotos

4cm*2cm

InternalPhotos Inductionantenna PCBantenna

Setupphotos ConducTEDEMISSIONTEST