2AJUMAC-AS30-UNI08Aconic Animal Speakers

Play/ Pause Volume + / Next Volume - / Previous Answer calls Power On/Off PHONE CALLS Short press the “ ” while the phone is ringing to answer an incoming call; Short press the “ ” to end the call; Long press the “ ” while the phone is ringing to reject an incoming call; Short press the “ ” twice to dial your last number called. SPECIFICATIONS • Signal to noise ratio:65dB • Playing time:2-3Hrs• Built-in battery:300mAh • Charging time:2.5Hrs • Bluetooth Distance: within 30 feet • Input Sensitivity:500mV PAIRING While the wireless speaker is off, press and hold the power button down for 3-4 seconds, the speaker will turn on and enter pairing mode automatically accompanied by the prompt. Activate the Bluetooth feature on your smartphone. Search for the device “Aconic AS30” and pair as per your smartphone’s instruction. When the wireless speaker is successfully paired with your device the speaker will give an audio cue. Your smartphone will remember pairing with the speaker for future use. FCC Statement This device complies with part 15 of the FCC Rules Operation.It is subject to the following two conditions: 1.This device may not cause harmful interference. 2.This device must accept any interference that is received, including any interference that may cause an undesired operation Remark:The maximum ambient temperature for the battery is -10~40 degrees. CHARGING Before first use, it is recommended that you charge your wireless speaker for a minimum of 1 hour. Connect the supplied Micro USB charging cable to the Micro USB port on the bottom of the Bluetooth Speaker (this is covered by a rubber seal). Connect the other end to a spare USB port on your laptop, computer or USB wall charger (not included). Aconic Animal Speakers Introducing the Aconic Animal Speakers. The portable speaker is compatible with any Bluetooth enabled device. Works great with Iphone, Galaxy and Android phones. The convenient buttons for music and call controls makes it easy to use whether your in the shower, at the pool, or on the go. PLAY MUSIC Start audio playback on your phone or MP3 player. Control the volume and track playback using the control pad located on the back of the wireless speaker. To increase/decrease the volume, hold down the “ ” or “ ” buttons. To skip songs short press the “ ” or “ ” buttons. To pause music short press the “ ”. 2 2 1 1 5 5 4 4 3 3 The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment. Such modifications or change could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the i nstructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-located or conjunction with any other antenna or transmitter. • Driver Power:3W • Speaker unit:45mm 4Ω

Aduro Products LLC 250 Liberty Street, Metuchen, N.J. 08840, USA Tel:718-832-8500 EXT: 228 E-mail: [email protected] Date: 13/04/2020 To: FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 We, Aduro Products LLC, hereby declare that： Product Name: Aconic Animal Speakers Model No:AC-AS30-UNI08,AC-AS30-UNI06,AC-AS30-CT03 ,AC-AS30-CT01 FCC ID: 2AJUMAC-AS30-UNI08 For BT module: BLE 1M/2M and EDR(8DPSK) are disable by software For Below are activated: Bluetooth BDR(GFSK) , EDR(π/4‐DQPSK) Except for the manufacturer, the end user does not have any capability to modify/change the RF parameters. We acknowledge that it is the manufacturer’s responsibility to provide the radio configurations to ensure compliance with Commission’s rules. Sincerely Yours, Signature: Printed Name: Jack Braha Title: PRESIDENT

Aduro Products LLC 250 Liberty Street, Metuchen, N.J. 08840, USA Tel:718-832-8500 EXT: 228 E-mail: [email protected] 19/03/2020 Product Similarity Declaration To Whom It May Concern, We, Aduro Products, LLC hereby declare that we have a product named as Aconic Animal Speakers (Model no:AC-AS30-UNI08 FCC ID: 2AJUMAC-AS30-UNI08) was tested by BACL, meanwhile, for our marketing purpose, we would like to list a series models (AC-AS30-UNI06 AC-AS30-CT03 AC- AS30-CT01) on reports and certificate, all the models are identical schematics, except for the different colors. No other changes are made to them. We confirm that all information above is true, and we’ll be responsible for all the consequences. Please contact me if you have any question. Company Name: Aduro Products, LLC Name: Jack Braha Title: PRESIDENT Signature:

Aduro Products LLC 250 Liberty Street, Metuchen, N.J. 08840, USA Tel:718-832-8500 EXT: 228 E-mail: [email protected] FCC Authorization 13/03/2020 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, Aduro Products LLC , the undersigned, hereby authorize Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signature: Printed Name: Jack Braha Title: PRESIDENT QA-FR-170-B

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS

EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS BT Antenna Battery Label

Circuit Description Battey 3.7V provides energy for the Bluetooth chip(AC6928B),Crystal oscillator 24MHZ provides the clock signal for the Bluetooth chip. Bluetooth signals get through a matching circuit, and then transmitted to the space through the antenna(2402Mhz‐2480Mhz).When the product is connected,the product can be in two-way communication with other Bluetooth devices, and then the device's Bluetooth module sends Bluetooth signals into space, the product receives the Bluetooth signal through an antenna, transmission to the Bluetooth chip via matching circuit. After the Bluetooth chip decodes the received signal, it is transmitted to the amplifier chip through the circuit to amplify the signal, and then sent to the speaker to restore the sound. The entire signal transmission process is powered by a 3.7V lithium battery, and the signal status is controlled by the peripheral keys.

1 2 Y2 24M 10PPM 9PF MAKE MAKE1 - + MIC1 LED1 B R6 1K 1 2 C13 1 SHDN 2 VREP 3 IN+ 4 IN- 5 OUT- 6 VCC 7 GND 8 OUT+ U5 8002 8002 R13 100K C14 105 R1 10K C16 683 R23 1K LED2 1 CHG 2 GND 3 VBAT 4 VBUS 5 NC U2 4054 R24 3K3 C10 106 MAKE2 MAKE3 1 4 2 3 KEY1 1 4 2 3 KEY2 1 4 2 3 KEY3 1 4 2 3 KEY4 1 4 2 3 KEY5 DAT1 CLK1 MAKE4 MAKE5 MAKE6 MAKE7 DAT2 DAT3 R20 6.8K C28 224 R10 47k ANT4 C1 102 C2 104 C5 105 C6 105 C7 104 C8 105 1 PC5/SD1CLK 2 PC4/SD1CMD/ADC4 3 USBDM/PC3/SD1DAT/ADC10 4 USBDP/PA4/AUX1R/ADC1 5 PA0/MIC/PA3/AUX1L/ADC0 6 DACL 7 DACVDD 8 VCOM 9 VSSIO 10 VDDIO 20 BT_OSCO 19 BT_OSCI 18 FMIP 17 BT_RF 16 BT_AVDD 15 ADC12/PR2 14 ADC12/PR1 13 RTCVDD 12 VBAT 11 PWMH2H/ADC9/AUX0R/PB5 U1 AC6928B C3 104 C4 106 1 B 2 E 3 C Q2 R5 100K R4 1K DAT4 DAT5 XO_N XO_P BTANT BTLED VBAT DACL VBAT ADKEY VBAT KEY1 KEY2 KEY3 KEY4 MIC_IN DACVDD KEY1 KEY2 KEY3 MIC_IN BTLED DACL MUTE ADKEY BTANT XO_N XO_P DACVDD VCOM VDDIO KEY4 BT_AVDD VBAT FMIP MUTE

Note: This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “★”. BACL is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ’*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. FCC PART 15.247 TEST REPORT For Aduro Products ,LLC 250 Liberty Street, Metuchen, New Jersey, United States FCC ID: 2AJUMAC-AS30-UNI08 Report Type: Original Report Product Type: Aconic Animal Speakers Re port Number: RSZ200312830-00 Re port Date: 2020-03-25 Reviewed B y: Jimmy Xiao RF Engineer Prepared By: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F., West Wing, Third Phase of Wanli Industrial Building, Shihua Road, Futian Free Trade Zone, Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ200312830-00 FCC Part 15.247 Page 2 of 48 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 OBJECTIVE ................................................................................................................................................................... 4 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 4 TEST METHODOLOGY .................................................................................................................................................. 4 MEASUREMENT UNCERTAINTY .................................................................................................................................... 5 TEST FACILITY ............................................................................................................................................................. 5 SYSTEM TEST CONFIGURATION .......................................................................................................................... 6 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 6 EUT EXERCISE SOFTWARE .......................................................................................................................................... 6 SPECIAL ACCESSORIES ................................................................................................................................................. 6 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 6 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 6 EXTERNAL I/O CABLE .................................................................................................................................................. 6 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 7 SUMMARY OF TEST RESULTS ............................................................................................................................... 8 TEST EQUIPMENT LIST ........................................................................................................................................... 9 FCC§15.247 (i), §1.1307 (b) (1) &§2.1093 – RF EXPOSURE ...................................................................................... 11 APPLICABLE STANDARD ............................................................................................................................................ 11 FCC §15.203 – ANTENNA REQUIREMENT .......................................................................................................... 12 APPLICABLE STANDARD ............................................................................................................................................ 12 ANTENNA CONNECTOR CONSTRUCTION .................................................................................................................... 12 FCC §15.207 (a) – AC LINE CONDUCTED EMISSIONS ..................................................................................... 13 APPLICABLE STANDARD ............................................................................................................................................ 13 EUT SETUP ................................................................................................................................................................ 13 EMI TEST RECEIVER SETUP ....................................................................................................................................... 13 TEST PROCEDURE ...................................................................................................................................................... 13 CORRECTED FACTOR & MARGIN CALCULATION ....................................................................................................... 14 TEST RESULT…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Conducted Emissions - Front View Conducted Emissions - Side View Radiated Emissions View (Below 1 GHz) Radiated Emissions View (Above 1 GHz)