2AJVQ-MWH653SWiFi/BT Module

Qingdao Intelligent&Precise Electronics Co., Ltd. No218,Qianwangang Road, Qingdao Economic&Technological Development Zone P.O. Box 266071, Qingdao, 266071 China * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. FCC Agent Designation for Service of Process - Certification Attestation Letter DATE 1/26/2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 ATTN.: Reviewing Engineer FCC ID: 2AJVQ-MWH653S Applicant Company Name: Qingdao Intelligent&Precise Electronics Co., Ltd. Company Address: No218,Qianwangang Road, Qingdao Economic&Technological Development Zone P.O. Box 266071, Qingdao, 266071 China Applicant name: Peng Wang Email Address: [email protected] FRN: 0025785783 Per section 2.911(d)(7) of the FCC rules, Qingdao Intelligent&Precise Electronics Co., Ltd certifies that the equipment for which authorization is sought is designated to the following FCC Designated agent* for service of process: Company Name: FCC US Agent, LLC Physical U.S. Company Address: 3722 lllinois Avenue, Saint Charles, lL,60174,USA Agent name: Tim Payne Phone:708-571-3148 Agent Email: [email protected] FRN: 0033402884 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Designated Agent Signed: (Required, if different to Applicant): Signed: Signed: Printed name: Peng Wang Printed name: Tim Payne Title: Certification Engineer Title: N/A Company Name: Qingdao Intelligent&Precise Electronics Co., Ltd Company Name: FCC US Agent, LLC Date: 1/26/2026 Date: 1/26/2026

Qingdao Intelligent&Precise Electronics Co., Ltd No218,Qianwangang Road, Qingdao Economic&Technological Development Zone P.O. Box 266071, Qingdao, 266071 China Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: Jan. 27, 26 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: 2AJVQ-MWH653S Qingdao Intelligent&Precise Electronics Co., Ltd (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Peng Wang Title: Certification Engineer Tel.: 18724717972 Fax Number: 053255755677 Email: [email protected]

Qingdao Intelligent&Precise Electronics Co., Ltd No218,Qianwangang Road, Qingdao Economic&Technological Development Zone P.O. Box 266071, Qingdao, 266071 China 1 | Page Attestation Statements To: Federal Communications Commission Date: Jan. 27, 26 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: [2AJVQ-MWH653S] Product Name: [WiFi/BT Module] This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature: Printed Name: Peng Wang Title: Certification Engineer Tel.: 18724717972 Fax Number: 053255755677 Email: [email protected] Qingdao Intelligent&Precise Electronics Co., Ltd No218,Qianwangang Road, Qingdao Economic&Technological Development Zone P.O. Box 266071, Qingdao, 266071 China 2 | Page Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☒ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. Compliance ☒ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check

Qingdao Intelligent&Precise Electronics Co., Ltd No218,Qianwangang Road, Qingdao Economic&Technological Development Zone P.O. Box 266071, Qingdao, 266071 China (2026/01/26) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for: FCC ID: 2AJVQ-MWH653S Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request permanent confidential treatment of the exhibits accompanying this certification application as outlined below :  Block Diagram  Schematics  Operational Description  NIl Software Security The above exhibits contain trade secrets and/or proprietary information that are not publicly available and materials that the Applicant has spent considerable efforts in developing. Public disclosure of these may be harmful to the Applicant and give an unfair advantage to competitors on the market. Pursuant to DA 04-1705, the applicant also requests temporary confidential treatment of the exhibits outlined below for a period of (up to 180) days from the date of equipment authorization and prior to marketing in the United States to prevent the premature release of any sensitive information. Applicant is aware of their responsibility to notify DERYCOM in the event information regarding the product or the product is made available to the public before the requested period has expired.  User Manual  Internal Photos  External Photos  Test Setup Photos Sincerely, Signature: Printed Name: Peng Wang Title: Certification Engineer Tel.: 18724717972 Fax Number: 053255755677 Email: [email protected]

Qingdao Intelligent&Precise Electronics Co., Ltd No218,Qianwangang Road, Qingdao Economic&Technological Development Zone P.O. Box 266071, Qingdao, 266071 China (2026/01/26) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2AJVQ-MWH653S I, the undersigned, hereby authorize (DEKRA Testing and Certification (Suzhou) Co., Ltd.) to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by (DEKRA Testing and Certification (Suzhou) Co., Ltd.) shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with (Qingdao Intelligent&Precise Electronics Co., Ltd). We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, Signature: Contact Person: Peng Wang Title: Certification Engineer Tel: 18724717972 Fax: 053255755677 Email: [email protected]

Qingdao Intelligent&Precise Electronics Co., Ltd No218,Qianwangang Road, Qingdao Economic&Technological Development Zone P.O. Box 266071, Qingdao, 266071 China Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date:2026/02/02 Subject; Modular Transmitter Application Company name: Qingdao Intelligent&Precise Electronics Co., Ltd FCC ID: 2AJVQ-MWH653S Dear Sir/Madam, This letter includes the FCC application requirements for Modular Transmitter Approval Request for;- FCC KDB 996369 D01 ‘Module Certification Guide v04r02; and FCC KDB 996369 D03 OEM Manual v01r01 In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 ‘Module Equip Auth Guide v02’. FCC ID: 2AJVQ-MWH653S has been examined against the following requirements. Requirement per 15.212 and KDB 996369 D01 Explanation from Grantee (do not write yes/no, but explain why product complies/how it is achieved) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly. The module contains a metal shield which covers all RF active components and circuitry to comply with FCC limits. The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal. The module transits part 15 compliant signal, in which the maximum data rate is defined by the standard and where the data is buffered in the memory and not transmitted in excessive data rate nor on the over-modulated signals. The module must contain power supply regulation on the module. The module contains its own power supply regulation. The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per §§ 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b). The module uses FPCB antenna The module must demonstrate compliance in a stand-alone configuration. The module was tested stand-alone as shown in test setup photographs filed with this application. The module must be labeled with its permanently affixed FCC ID label, or use an electronic display (see KDB Publication 784748). There is a label on the module as shown in the labeling exhibit filed with this application. Host specific labelling instructions are shown in the user manual. filed with this application. Qingdao Intelligent&Precise Electronics Co., Ltd No218,Qianwangang Road, Qingdao Economic&Technological Development Zone P.O. Box 266071, Qingdao, 266071 China The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. The module complies with FCC Part 15C requirements. Instructions to the OEM installer are provided in the installation manual filed with this application. The module must comply with RF exposure requirements The module meets mobile exclusion levels as shown in the RF exposure information filed with this application. Integration Instructions for host product manufacturers The following items are submitted in support of application for Modular Transmitter FCC ID as noted above as required by the FCC KDB 996369 D03 OEM Manual v01r01. These items are provided as integration instructions for host product manufacturers (e.g., OEM instruction manual) to use when integrating a module in a host product. Any requirements that are not applicable to the Module are as indicated below. Summary of requirements and Checklist. Refer to the KDB for description of the complete requirements; KDB Ref Sect Requirements of KDB 996369 D03 User Manual Page Number reference 2.2 List of applicable FCC rules Page 2 2.3 Summarize the specific operational use conditions Page 2 2.4 Limited module procedures Page 2 2.5 Trace antenna designs Page 2 2.6 RF exposure considerations Page 2 2.7 Antennas Page 2 2.8 Label and compliance information Page 3 2.9 Information on test modes and additional testing requirements Page 3 2.10 Additional testing, Part 15 Subpart B disclaimer Page 3 2.11 Note EMI Considerations Page 3 2.12 How to make changes Page 4 Signed : Printed Name: Peng Wang Title: Certification Engineer Tel.: 18724717972 Fax Number: 053255755677 Email: [email protected]

FCC ID:2AJVQ-MWH653S MWH653S IC:22470-MWH653S 7.25 5.2

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Test report No: 25C0463R.705 TEST REPORT Product Name WiFi/BT Module Trademark Hisense Model and /or type reference MWH653S FCC ID 2AJVQ-MWH653S Applicant ́s name / address Qingdao Intelligent & Precise Electronics Co., Ltd. No.218, Qianwangang Road, Economic and Technological Development Zone, Qingdao, Shandong Province, China Test method requested, standard FCC 47CFR §2.1091 Verdict Summary IN COMPLIANCE Documented By (name / position & signature) Tim Cao / Project Manager Approved by (name / position & signature) Frank He / Technical Manager Date of issue 2026-01-27 Report Version V1.0 Report template No. Template_FCC-MPE-RF-V1.0 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 25C0463R.705 Page 2 / 11 INDEX page Competences and Guarantees ......................................................................................................................................... 3 General conditions ............................................................................................................................................................ 3 Document History .............................................................................................................................................................. 4 1 General Information ................................................................................................................................................. 5 2. RF Exposure Evaluation .......................................................................................................................................... 6 2.1. Limits: KDB 447498 D04.......................................................................................................................................... 6 2.2. Test Procedure ...................................................................................................................................................... 10 2.3. Test Result of RF Exposure Evaluation ................................................................................................................. 10 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 25C0463R.705 Page 3 / 11 COMPETENCES AND GUARANTEES DEKRA is a testing laboratory competent to carry out the tests described in this report. In order to assure the traceability to other national and international laboratories, DEKRA has a calibration and maintenance program for its measurement equipment. DEKRA guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated in the report and it is based on the knowledge and technical facilities available at DEKRA at the time of performance of the test. DEKRA is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA. GENERAL CONDITIONS Test Location A No. 99, Hongye Road, Suzhou Industrial Park Suzhou, 215006, P.R. China Test Facility A A2LA (Certificate No. 3235.01) CNAS (Certificate No. L5313) FCC - Designation Number: CN1199 Test Firm Registration Number: 566524 ISED - CAB identifier: CN0040 IC#: 4075B Test Location B No. 8213, Fanhua Avenue, Baohe District, Hefei City, Anhui Province, China Test Facility B A2LA (Certificate No. 6579.01) CNAS (Certificate No. L21125) FCC - Designation Number: CN1231 Test Firm Registration Number: 690292 ISED - CAB identifier: CN0175 IC#: 32222 Date(receive sample) Dec. 15, 2025 Date (start test) Dec. 16, 2025 Date (finish test) Jan. 21, 2026 1. This report is only referred to the item that has undergone the test. 2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies or Competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without previous written permission of DEKRA. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permission of DEKRA. DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 25C0463R.705 Page 4 / 11 DOCUMENT HISTORY Report No. Version Description Issued Date 25C0463R.705 V1.0 Initial issue of report. 2026-01-27 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 25C0463R.705 Page 5 / 11 1 GENERAL INFORMATION Product Name ............................... : WiFi/BT Module Model No. ...................................... : MWH653S Trademark. .................................... : Hisense FCC ID .......................................... : 2AJVQ-MWH653S Manufacturer ................................. : Qingdao Intelligent & Precise Electronics Co., Ltd. Manufacturer Address ................... : No.218, Qianwangang Road, Economic and Technological Development Zone, Qingdao, Shandong Province, China Power Supply ................................ : 3.3 Vdc Wireless specification #1 ............... : Wi-Fi Operating frequency range(s) ...…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Test report No: 25C0463R.701 TEST REPORT Product Name WiFi/BT Module Trademark Hisense Model and /or type reference MWH653S FCC ID 2AJVQ-MWH653S Applicant ́s name / address Qingdao Intelligent & Precise Electronics Co., Ltd. No.218, Qianwangang Road, Economic and Technological Development Zone, Qingdao, Shandong Province, China Test method requested, standard 47 CFR FCC Part 15 (Section 15.247) ANSI C63.10-2020+Cor. 1-2023+C63.10a-2024 + Errata to C63.10a-2024 Verdict Summary IN COMPLIANCE Tested By (name / position & signature) Tim Cao / Project Manager Approved by (name / position & signature) Frank He / Technical Manager Date of issue 2026-01-27 Report Version V1.0 Report template No. Template_FCC Part 15C-RF-V1.0 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 25C0463R.701 Page 2 / 218 INDEX page Competences and Guarantees ......................................................................................................................................... 4 General conditions ............................................................................................................................................................ 4 Document History .............................................................................................................................................................. 5 Test Summary ................................................................................................................................................................... 6 Used Equipment ................................................................................................................................................................ 7 Uncertainty ........................................................................................................................................................................ 8 1 General Information ................................................................................................................................................. 9 2 Description of Test Setup....................................................................................................................................... 13 3 Verdict summary section ........................................................................................................................................ 14 3.1 Standards .................................................................................................................................................... 14 3.2 Deviation(s) from the Standard(s) / Test Specification(s) ............................................................................ 14 4 Test Results ........................................................................................................................................................... 15 4.1 AC Power Line Conducted Emission ........................................................................................................... 15 4.1.1 Limit ................................................................................................................................................... 15 4.1.2 Test Setup ......................................................................................................................................... 15 4.1.3 Test Procedure .................................................................................................................................. 15 4.2 Emissions in restricted frequency bands ..................................................................................................... 16 4.2.1 Limit ................................................................................................................................................... 16 4.2.2 Test Setup ......................................................................................................................................... 17 4.2.3 Test Procedure .................................................................................................................................. 18 4.3 Emissions in non-restricted frequency band ............................................................................................... 19 4.3.1 Limit ................................................................................................................................................... 19 4.3.2 Test Setup ......................................................................................................................................... 19 4.3.3 Test Procedure .................................................................................................................................. 19 4.4 Duty cycle .................................................................................................................................................... 20 4.4.1 Limit ................................................................................................................................................... 20 4.4.2 Test Setup ......................................................................................................................................... 20 4.4.3 Test Procedure .................................................................................................................................. 20 4.5 Radiated Emission Band Edge .................................................................................................................... 21 4.5.1 Limit ................................................................................................................................................... 21 4.5.…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 25C0463R.701 Page 72 / 218 11G-2462-30~1000-PASS 11G-2462-1000~25000-PASS DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 25C0463R.701 Page 73 / 218 11N20-2412-30~1000-PASS 11N20-2412-1000~25000-PASS DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 25C0463R.701 Page 74 / 218 11N20-2437-30~1000-PASS 11N20-2437-1000~25000-PASS DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 25C0463R.701 Page 75 / 218 11N20-2462-30~1000-PASS 11N20-2462-1000~25000-PASS DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 25C0463R.701 Page 76 / 218 11N40-2422-30~1000-PASS 11N40-2422-1000~25000-PASS DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 25C0463R.701 Page 77 / 218 11N40-2437-30~1000-PASS 11N40-2437-1000~25000-PASS DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 25C0463R.701 Page 78 / 218 11N40-2452-30~1000-PASS 11N40-2452-1000~25000-PASS DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 25C0463R.701 Page 79 / 218 11AX20-2412-30~1000-PASS 11AX20-2412-1000~25000-PASS DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 25C0463R.701 Page 80 / 218 11AX20-2437-30~1000-PASS 11AX20-2437-1000~25000-PASS DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 25C0463R.701 Page 81 / 218 11AX20-2462-30~1000-PASS 11AX20-2462-1000~25000-PASS DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 25C0463R.701 Page 82 / 218 11AX40-2422-30~1000-PASS 11AX40-2422-1000~25000-PASS DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 25C0463R.701 Page 83 / 218 11AX40-2437-30~1000-PASS 11AX40-2437-1000~25000-PASS DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 25C0463R.701 Page 84 / 218 11AX40-2452-30~1000-PASS 11AX40-2452-1000~25000-PASS Note: We have evaluated both SISO-Main, SISO-Aux and MIMO-Main+Aux mode, only worst data shown in this report. DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 25C0463R.701 Page 85 / 218 Duty Cycle Test Result TestMode Frequency[MHz] Transmission Duration [ms] Transmission Period [ms] Duty Cycle [%] Factor 11B 2412 16.43 20.36 80.70 0.93 11B 2437 16.43 20.35 80.74 0.93 11B 2462 16.44 20.36 80.75 0.93 11G 2412 5.40 20.35 26.54 5.76 11G 2437 5.40 20.36 26.52 5.76 11G 2462 5.40 20.36 26.52 5.76 11N20 2412 5.01 20.36 24.61 6.09 11N20 2437 5.01 20.36 24.61 6.09 11N20 2462 5.00 20.35 24.57 6.10 11N40 2422 2.43 11.35 21.41 6.69 11N40 2437 2.43 11.36 21.39 6.70 11N40 2452 2.42 11.35 21.32 6.71 11AX20 2412 3.82 20.36 18.76 7.27 11AX20 2437 3.81 20.35 18.72 7.28 11AX20 2462 3.82 20.35 18.77 7.27 11AX40 2422 1.93 20.35 9.48 10.23 11AX40 2437 1.93 20.35 9.48 10.23 11AX40 2452 1.94 20.35 9.53 10.21 Note : We have evaluated both SISO-Ant1, SISO-Ant2 and MIMO mode, only worst data shown in this report. DE…

Text truncated - open the document above for the full version.