2AJW7-00002Industrial asset reliability IOT sensor with WiFi and BLE

FCC ID: 2AJW7-00002 Mote Model 3 User Manual 1 Revision History VersionDateNotesContributor 1.0Dec 5, 2019Initial ReleaseKevin Du Mote Model 3 User Manual 2 Table of Contents Revision History1 Data Sheet3 How to Install Vibration Motes7 How to Remove Petasense Motes13 Blink Up - How to Connect Vibration Motes to WiFi16 RF exposure information19 Mote Model 3 User Manual 3 Data Sheet Model3 AccelerometerTri-axial MEMS Frequency Response2 to 6,000 Hz (+/- 3 dB) Frequency Response Accuracy At X Hz: X% At Y Hz: Y% Measurement Range+/- 2g to +/- 16g Transverse Sensitivity AD Conversion16 Bit Sensitivity0.061 mg/LSB Sampling Rate26.7 kHz Resolution TEMPERATURE SENSOR Measurement Range-40°C to 85°C (-40°F to 185°F) (+/- 5% accuracy) MAGNETIC SENSOR Digital Outputi2C Magnetic FieldFull scale adjustable from +/- 4 gauss to +/- 16 gauss Sampling RateUp to 1 KHz Mote Model 3 User Manual 4 PHYSICAL DimensionsHeight:58.1 mm (2.29 inches) S-ring diameter:38.7 mm (1.52 inches) Weight125 g Mounting (recommend epoxy or stud) Epoxy:Steel-enforced two-part epoxy Stud:6.35 mm (¼ inch) 28 UNF MaterialsCover: Base, Mount and S-ring: ENVIRONMENTAL Operating Temperature Range -40°C to 85°C (-40°F to 185°F) Storage Temperature< 85°C (185°F) without battery Shock Resistance2 meter fall, 16 g continuous vibration CertificationsClass I Div 2 (ABCD), IP67, NEMA 4, FCC, CE, RoHS compliant POWER SourceCR123A (CR17345) 3V Lithium Battery Life1-2 years with 8 measurements per day ~20% reduced battery life if operating below -10°C (15°F) CONNECTIVITY Wireless ProtocolWiFi (2.4 GHz, 802.11 b/g/n) (Bluetooth can be used to trigger on-demand readings) AntennaWiFi: Chip Antenna | -0.4 dBi max gain Bluetooth: PCB Antenna | 2.0 dBi max gain Mote Model 3 User Manual 5 Processor32-bit 144 MHz ARM Cortex M4F (remote firmware updates) ACCESSIBILITY User InterfaceWeb: Internet browser access Mobile: iOS application available in App Store SecurityTLS 1.2 with AES encryption Mote Model 3 User Manual 6 Mote Model 3 User Manual 7 How to Install Vibration Motes Overview Mounting Petasense Motes is simple and does not require any special skills. Each Mote takes about 5-10 minutes to mount. Start monitoring the health of your industrial machines in four simple steps: Step 1. Power up the Mote Step 2. Prepare the machine surface Step 3. Mix the epoxy Step 4. Mount the Mote What you will need: ●Petasense Motes ●CR123A 3V Batteries (Duracell recommended for longer battery life) ●Handheld rotary tool with sanding attachment (Dremel recommended) ●2-part steel-enforced epoxy (JB Weld SteelStik recommended) - Safety Datasheet ●X-Acto knife ●Rubber gloves (for mixing epoxy) ●Soap Water (1:4 soap to water mixture) ●Shop towels ●Protective glasses ●Protective gloves ●Dust Mask ●*Not Pictured* Silicone/Lithium Grease (Model 2 Only) Mote Model 3 User Manual 8 Mote Components: These instructions will reference specific components of the Mote as follows: Mote Model 3 User Manual 9 Before Getting Started 0.1 Confirm that your WiFi network has coverage in the machine areas. If possible, perform a brief site survey with a mobile device. 0.2 Prepare the appropriately sized pieces of 2-part steel-enforced epoxy. Each Mote requires a 2.5 – 3-gram piece of epoxy. Each tube of JB-Weld SteelStik will contain enough epoxy for approximately 20 Motes. 0.3 Document the allocation of your Motes very carefully. Keep a record of the serial numbers of your Motes and which machines they are mounted on. This attention to detail is essential for any successful asset monitoring program. Note: Before handling Petasense Motes, be sureto wash your hands to avoid getting dirt or other particles inside the device. Now, let’s get started. Step 1. Power up the Mote 1.1 Remove the Mote cover and insert a new CR123A battery. The Mote will blink a series of yellow and red LEDs, ending with a slow, blinking green LED, indicating that the Mote has successfully connected to WiFi. If the Mote only blinks yellow and/or red, you will need to configure the Mote with the appropriate WiFi credentials before continuing. (See “How to Connect Vibration Motes to WiFi”) 1.2 Once the Mote has connected to WiFi, replace the cover, place the device on the mount, place the S-ring over the top of the device and thoroughly tighten the S-ring clockwise at the base. *If using Model 2, please see further instructions below.* Mote Model 3 User Manual 10 Step 2. Prepare the machine surface 2.1 Identify a mounting location close to where the bearing is located on the machine. The ideal mounting location will be a rigid, flat surface. Avoid mounting on sheet metal covers, fins or other flimsy surfaces that are prone to rattle. 2.2 Use the rotary tool to strip the paint from the mounting location on the machine. 2.3 Apply Soap Water to a shop towel and wipe off any dirt or particles from the sanded mounting location. Mote Model 3 User Manual 11 Step 3. Mix the epoxy 3.1 Wearing rubber gloves, knead one piece of 2-part steel-enforced epoxy thoroughly in your hand until the color is uniform. Ensure that the epoxy is in good condition (firm and slightly moist, not too hard or crumbly). Once the epoxy is mixed, you will need to apply it to the Mote quickly or it will start to harden. 3.2 Roll epoxy into a 2-3 inch strip, then form a ring on the bottom of the Mote mount. Mote Model 3 User Manual 12 Step 4. Mount the Mote 4.1 Place the Mote on the mounting location with the Petasense logo facing the closest machine shaft. Press down firmly for 15-20 seconds. Note: It is important that the Mote is mounted with the Petasense logo facing the direction of the machine’s shaft for orientation purposes 4.2 Visually check that the epoxy is only bonding to the base of the Mote, not touching the knurled S-ring above the mount. If it is touching the S-ring, use the X-Acto knife to push the edges of the epoxy down toward the machine surface, so that the S-ring can be removed in the future for battery changes. Mounting Complete! …

Text truncated - open the document above for the full version.

Petasense Inc Date: Mar 13 th , 2020 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern: The Petasense Inc, the undersigned, hereby authorizes Miss. Wendy zhan from Shenzhen Morlab Communications Technology Co., Ltd., to act on the behalf of the Petasense solely in matters relating to the application for an FCC equipment authorization for FCC ID: 2AJW7-00002 including the signing of documents in connection with this Application. Necessary acts carried out Shenzhen Morlab Communications Technology Co., Ltd. on our behalf of the Petasense in connection with the Application shall have the same effect as acts of the Petasense Inc. Petasense Inc also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Thank you for your attention to this matter. Yours Sincerely, Signatory: Arun Santhebennur Co-founder 2142130200 [email protected] Petasense Inc.

Date: Mar 13 th , 20 20 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: Request of Confidentiality for FCC ID: 2AJW7-00002 To Whom it may concern: Pursuant to sections 0.457 and 0.459 of Commission’s Rules(CFR 47), and Section 552(b)(4) of the Freedom of Information Act, Petasense Inc hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We also hereby request Short -Term Confidentiality for 180 days after the grant as outlined in Public Notice DA04-1705. This provision will give Petasense Inc temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT AND SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT 1 Block Diagram 2 Operational Description 3 Schematics 4 BOM SHORT-TERM 5 External Photos 6 Internal Photos 7 Test-Setup Photos 8 User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Signatory: Arun Santhebennur Co-founder, Pet asense Inc +1-( 214)- 213- 0200

MMORLAB External 1. EUT f 2. EUT B GROU l Photos front view rear view UP FL1-3, Bu Block67, w w uilding A, FeiYang Sc BaoAn District, She FCC ID cience Park, No.8 Lo enZhen , GuangDon : 2AJW7- ngChang Road, ng Province, P. R. C -00002 Tel: 86-75 China Http://www 5-36698555 Fax: w.morlab.cn E-m : 86-755-36698525 ail: service@morlab ..cn MMORLAB 3. EUT 4. EUT B GROU left side v right side UP FL1-3, Bu Block67, view e view uilding A, FeiYang Sc BaoAn District, She cience Park, No.8 Lo enZhen , GuangDon ngChang Road, ng Province, P. R. C Tel: 86-75 China Http://www 5-36698555 Fax: w.morlab.cn E-m : 86-755-36698525 ail: service@morlab ..cn MMORLAB 5. EUT 6. EUT B GROU top view bottom v UP FL1-3, Bu Block67, iew uilding A, FeiYang Sc BaoAn District, She cience Park, No.8 Lo enZhen , GuangDon ngChang Road, ng Province, P. R. C Tel: 86-75 China Http://www 5-36698555 Fax: w.morlab.cn E-m : 86-755-36698525 ail: service@morlab ..cn

Label: Location:

MMORLAB Internal 1. EUT B GROU Photos uncover v UP FL1-3, Bu Block67, view uilding A, FeiYang Sc BaoAn District, She FCC ID cience Park, No.8 Lo enZhen , GuangDon : 2AJW7- ngChang Road, ng Province, P. R. C -00002 Tel: 86-75 China Http://www 5-36698555 Fax: w.morlab.cn E-m : 86-755-36698525 ail: service@morlab ..cn MMORLAB B GROUUP FL1-3, Bu Block67, uilding A, FeiYang Sc BaoAn District, She cience Park, No.8 Lo enZhen , GuangDon ngChang Road, ng Province, P. R. C Tel: 86-75 China Http://www 5-36698555 Fax: w.morlab.cn E-m : 86-755-36698525 ail: service@morlab ..cn MMORLAB B GROUUP FL1-3, Bu Block67, uilding A, FeiYang Sc BaoAn District, She cience Park, No.8 Lo enZhen , GuangDon ngChang Road, ng Province, P. R. C Tel: 86-75 China Http://www 5-36698555 Fax: w.morlab.cn E-m : 86-755-36698525 ail: service@morlab ..cn MMORLAB B GROUUP FL1-3, Bu Block67, uilding A, FeiYang Sc BaoAn District, She cience Park, No.8 Lo enZhen , GuangDon ngChang Road, ng Province, P. R. C Tel: 86-75 China Http://www 5-36698555 Fax: w.morlab.cn E-m : 86-755-36698525 ail: service@morlab ..cn MMORLAB B GROUUP FL1-3, Bu Block67, uilding A, FeiYang Sc BaoAn District, She cience Park, No.8 Lo enZhen , GuangDon ngChang Road, ng Province, P. R. C Tel: 86-75 China Http://www 5-36698555 Fax: w.morlab.cn E-m : 86-755-36698525 ail: service@morlab ..cn MMORLAB B GROUUP FL1-3, Bu Block67, uilding A, FeiYang Sc BaoAn District, She cience Park, No.8 Lo enZhen , GuangDon ngChang Road, ng Province, P. R. C Tel: 86-75 China Http://www 5-36698555 Fax: w.morlab.cn E-m : 86-755-36698525 ail: service@morlab ..cn MMORLAB B GROUUP FL1-3, Bu Block67, uilding A, FeiYang Sc BaoAn District, She cience Park, No.8 Lo enZhen , GuangDon ngChang Road, ng Province, P. R. C Tel: 86-75 China Http://www 5-36698555 Fax: w.morlab.cn E-m : 86-755-36698525 ail: service@morlab ..cn MMORLAB B GROUUP FL1-3, Bu Block67, uilding A, FeiYang Sc BaoAn District, She cience Park, No.8 Lo enZhen , GuangDon ngChang Road, ng Province, P. R. C Tel: 86-75 China Http://www 5-36698555 Fax: w.morlab.cn E-m : 86-755-36698525 ail: service@morlab ..cn MMORLAB 2. Anten B GROU nna view UP FL1-3, Bu Block67, WIFI An uilding A, FeiYang Sc BaoAn District, She ntenna cience Park, No.8 Lo enZhen , GuangDon ngChang Road, ng Province, P. R. C Tel: 86-75 China Http://www BT An 5-36698555 Fax: w.morlab.cn E-m ntenna : 86-755-36698525 ail: service@morlab ..cn

NOTE: This document is issued by MORLAB, the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 1 of 9 REPORT No.：SZ19110224S01 RF EXPOSURE ASSESSMENT REPORT APPLICANT : Petasense Inc PRODUCT NAME : Industrial asset reliability IOT sensor MODEL NAME : Vibration Mote Model 3 BRAND NAME : Petasense FCC ID : 2AJW7-00002 STANDARD(S) : 47CFR 2.1091 KDB 447498 RECEIPT DATE : 2020-03-16 TEST DATE : 2020-04-04 to 2020-04-13 ISSUE DATE : 2020-04-15 Edited by: Peng Mi (Rapporteur) Approved by: Peng Huarui (Supervisor) MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ19110224S01 Page 2of 9 DIRECTORY 1. Technical Information ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 4 1.1 Applicant and Manufacturer Information ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 4 1.2 Equipment under Test (EUT) Description ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 4 1.3 Applied Reference Documents ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 5 2. Device Category and RF Exposure Limit ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 6 3. RF Output Power ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 7 4. RF Exposure Assessment ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 8 Annex A General Information ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 9 MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ19110224S01 Page 3of 9 Change history Version Date Reason of changed 1.0 2020-04-15 Original MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ19110224S01 Page 4of 9 1. Technical Information Note: Provide by applicant. 1.1 Applicant and Manufacturer Information Applicant: Petasense Inc Applicant Address: 2 North 1st St, 5th Floor, San Jose, California, United States Manufacturer: RocketEMS Manufacturer Address: 2950 Patrick Henry Dr, Santa Clara CA 95054 1.2 Equipment under Test (EUT) Description Product Name: Industrial asset reliability IOT sensor Serial No: (N/A, marked #1 by test site) Hardware Version: 1.0 Software Version: 1.0 Frequency Bands: WLAN 2.4GHz: 2412 MHz ~ 2472 MHz Bluetooth: 2402 MHz ~ 2480 MHz Modulation Mode: 802.11b: DSSS 802.11a/g/n-HT20: OFDM Bluetooth LE: GFSK Antenna Type: WLAN 2.4GHz : Chip Antenna Bluetooth: PCB Antenna Antenna Gain: WLAN 2.4GHz:-0.4dBi Bluetooth:2.0dBi MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ19110224S01 Page 5of 9 1.3 Applied Reference Documents Leading reference documents for testing: No. Identity Document Title Method determination /Remark 1 47 CFR§2.1091 Radio Frequency Radiation Exposure Assessment: mobile devices No deviation 2 KDB 447498 D01v06 General RF Exposure Guidance No deviation Note 1: The test item is not applicable. Note 2: Additions to, deviation, or exclusions from the method shall be judged in the "method determination" column of add, deviate or exclude from the specific method shall be explained in the "Remark" of the above table. MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ19110224S01 Page 6of 9 2. Device Category and RF Exposure Limit Per user manual, Based on 47CFR 2.1091, this device belongs to mobile device category with General Population/Uncontrolled exposure. Mobile Devices: 47CFR 2.1091(b) For purposes of this section, a mobile device is defined as a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitter's radiating structure(s) and the body of the user or nearby persons. In this context, the term “fixed location” means that the device is physically secured at one location and is not able to be easily moved to another location. Transmitting devices designed to be used by consumers or workers that can be easily re-located, such as wireless devices associated with a personal computer, are considered to be mobile devices if they meet the 20 centimeter separation requirement. General Population/Uncontrolled Exposure: The general population/uncontrolled exposure…

Text truncated - open the document above for the full version.

NOTE: This document is issued by MORLAB, the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 1 of 72 REPORT No.：SZ19110224W01 TEST REPORT APPLICANT : Petasense Inc PRODUCT NAME : Industrial asset reliability IOT sensor MODEL NAME :Vibration Mote Model 3 BRAND NAME : Petasense FCC ID : 2AJW7-00002 STANDARD(S) : 47 CFR Part 15 Subpart C RECEIPT DATE : 2020-03-16 TEST DATE :2020-04-04 to 2020-04-13 ISSUE DATE :2020-04-15 Edited by: Peng Mi (Rapporteur) Approved by: Peng Huarui ( Supervisor ) MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 2 of 72 REPORT No.：SZ19110224W01 DIRECTORY 1. Technical Information ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 4 1.1. Applicant and Manufacturer Information ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 4 1.2. Equipment Under Test (EUT) Description ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 4 1.3. The Channel Number and Frequency ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 5 1.4. Test Standards and Results ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 6 1.5. Environmental Conditions ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 7 2. 47 CFR Part 15C Requirements ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 8 2.1. Antenna requirement ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 8 2.2. Duty Cycle Of Test Signal ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 9 2.3. Maximum Peak Conducted Output Power ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 10 2.4. Maximum Average Conducted Output Power ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 19 2.5. 6dB Bandwidth ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 21 2.6. Conducted Spurious Emissions and Band Edge ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 26 2.7. Power spectral density (PSD) ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 33 2.8. Conducted Emission ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 38 2.9. Restricted Frequency Bands ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 40 2.10. Radiated Emission ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 53 Annex A Test Uncertainty ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 69 Annex B Testing Laboratory Information ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 70 MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 3 of 72 REPORT No.：SZ19110224W01 Change History Version Date Reason for change 1.0 2020-04-15 First edition MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 4 of 72 REPORT No.：SZ19110224W01 1. Technical Information Note: Provide by applicant. 1.1. Applicant and Manufacturer Information Applicant: Petasense Inc Applicant Address: 2 North 1st St, 5th Floor, San Jose, California, United States Manufacturer: RocketEMS Manufacturer Address: 2950 Patrick Henry Dr, Santa Clara CA 95054 1.2. Equipment Under Test (EUT) Description Product Name: Industrial asset reliability IOT sensor Serial No: (N/A, marked #1 by test site) Hardware Version: 1.0 Software Version: 1.0 Equipment Type: Bluetooth LE Modulation Type: GFSK Bluetooth Version: 5.0 Data Rate: 1Mbps, 2Mbps,125Kbps,500Kbps Operating Frequency Range: 2402MHz - 2480MHz Antenna Type: PCB Antenna Antenna Gain: 2.0dBi Accessory Information: Battery Brand Name: Duracell Model No.: CR17345 Serial No.: (N/A, marked #1 by test site) Capacity: 1470mAh Rated Voltage: 3.00V Note 1: We use the dedicated software to control the EUT continuous transmission. Note 2: For a more detailed description, please refer to Specification or User’s Manual supplied by the applicant and/or manufacturer. MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 5 of 72 REPORT No.：SZ19110224W01 1.3. The Channel Number and Frequency Channel Frequency (MHz) Channel Frequency (MHz) Channel Frequency (MHz) Channel Frequency (MHz) 0 2402 10 2422 20 2442 30 2462 1 2404 11 2424 21 2444 31 2464 2 2406 12 2426 22 2446 32 2466 3 2408 13 2428 23 2448 33 2468 4 2410 14 2430 24 2450 34 2470 5 2412 15 2432 25 2452 35 2472 6 2414 16 2434 26 2454 36 2474 7 2416 17 2436 27 2456 37 2476 8 2418 18 2438 28 2458 38 2478 9 2420 19 2440 29 2460 39 2480 Note: The Lowest Channel 0, Middle 19 and Highest 39 were selected for test in the report. MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co.…

Text truncated - open the document above for the full version.

NOTE: This document is issued by MORLAB, the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 1 of 68 REPORT No.：SZ19110224W02 TEST REPORT APPLICANT : Petasense Inc PRODUCT NAME : Industrial asset reliability IOT sensor MODEL NAME :Vibration Mote Model 3 BRAND NAME : Petasense FCC ID : 2AJW7-00002 STANDARD(S) : 47 CFR Part 15 Subpart C RECEIPT DATE : 2020-03-16 TEST DATE :2020-04-04 to 2020-04-13 ISSUE DATE :2020-04-15 Edited by: Peng Mi (Rapporteur) Approved by: Peng Huarui ( Supervisor ) MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 2 of 68 REPORT No.：SZ19110224W02 DIRECTORY 1. Technical Information ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 4 1.1. Applicant and Manufacturer Information ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 4 1.2. Equipment Under Test (EUT) Description ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 4 1.3. Modulation Type and Data Rate of EUT ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 5 1.4. The Channel Number and Frequency ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 6 1.5. Test Standards and Results ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 7 1.6. Environmental Conditions ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 8 2. 47 CFR Part 15C Requirements ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 9 2.1. Antenna Requirement ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 9 2.2. Duty Cycle of Test Signal ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 10 2.3. Maximum Peak and Average Conducted Output Power ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 13 2.4. Bandwidth ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 16 2.5. Conducted Spurious Emissions and Band Edge ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 23 2.6. Power Spectral Density (PSD) ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 33 2.7. Conducted Emission ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 40 2.8. Restricted Frequency Bands ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 42 2.9. Radiated Emission ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 52 Annex A Test Uncertainty ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 65 Annex B Testing Laboratory Information ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 66 MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 3 of 68 REPORT No.：SZ19110224W02 Change History Version Date Reason for change 1.0 2020-04-15 First edition MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 4 of 68 REPORT No.：SZ19110224W02 1. Technical Information Note: Provide by applicant. 1.1. Applicant and Manufacturer Information Applicant: Petasense Inc Applicant Address: 2 North 1st St, 5th Floor, San Jose, California, United States Manufacturer: RocketEMS Manufacturer Address: 2950 Patrick Henry Dr, Santa Clara CA 95054 1.2. Equipment Under Test (EUT) Description Product Name: Industrial asset reliability IOT sensor Serial No: (N/A, marked #1 by test site) Hardware Version: 1.0 Software Version: 1.0 Equipment Type: WLAN2.4G Modulation Type: DSSS, OFDM Operating Frequency Range: 802.11b/g/ n(HT20): 2.412GHz - 2.472GHz Antenna Type: Chip Antenna Antenna Gain: -0.4dBi Accessory Information: Battery Brand Name: Duracell Model No.: CR17345 Serial No.: (N/A, marked #1 by test site) Capacity: 1470mAh Rated Voltage: 3.00V Note 1: We use the dedicated software to control the EUT continuous transmission. Note 2: For a more detailed description, please refer to Specification or User’s Manual supplied by the applicant and/or manufacturer. MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 5 of 68 REPORT No.：SZ19110224W02 1.3. Modulation Type and Data Rate of EUT Modulation technology Modulation Type Data Rate (Mbps) Note1 DSSS (802.11b) DBPSK 1 DQPSK 2 CCK 5.5/ 11 OFDM (802.11g) BPSK 6 / 9 QPSK 12 / 18 16QAM 24 / 36 64QAM 48 / 54 OFDM (802.11n-20MHz) BPSK 6.5 QPSK 13/19.5 16QAM 26/39 64QAM 52/58.5/65 Note1: The worst-case mode (bold face) in all data rates has been determined during the pre-scan, only the test data of the worst-case were recorded in this report. MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Provin…

Text truncated - open the document above for the full version.

Tes 1. 2. st Setup Radiate d Radiated …

Text truncated - open the document above for the full version.