2AJXA-TB5RiTOUCH BLOOM smartwatch

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR250800377103 Page: 1 of 11 Keny Xu EMC Laboratory Manager RF Exposure Evaluation Report Application No.: SZCR2508003771AT Applicant: AX Technologies LLC Address of Applicant: 1441 Broadway 27th Floor, New York,10018 United States Manufacturer: Shenzhen Gold-East Electronic Co.,Ltd Address of Manufacturer: Floor 6, Building 11, Rundongsheng Industrial Park Longteng Community, Xixiang Street, Bao’an District, Shenzhen, China Factory: Shenzhen Gold-East Electronic Co.,Ltd Address of Factory: Floor 6, Building 11, Rundongsheng Industrial Park Longteng Community, Xixiang Street, Bao’an District, Shenzhen, China Equipment Under Test (EUT): EUT Name: iTOUCH BLOOM smartwatch Model No.: TB5R01, TB5R05,TB5R06,TB5R11,TB5R13,IBLR01, IBLR05,IBLR06, IBLR11,IBLR13   Please refer to section 3.2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: iTOUCH, iTECH FCC ID: 2AJXA-TB5R Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2025-08-27 Date of Evaluation: 2025-08-29 to 2025-09-08 Date of Issue: 2025-09-09 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR250800377103 Page: 2 of 11 Revision Record Version Chapter Date Modifier Remark 01 2025-09-09 Original Authorized for issue by: Martin Li/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR250800377103 Page: 3 of 11 2 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Contents .................................................................................................................................................... 3 3 General Information .................................................................................................................................. 4 3.1 General Description of E.U.T. ............................................................................................................ 4 3.2 Details of E.U.T. ................................................................................................................................. 4 3.3 Separation Distance ........................................................................................................................... 5 3.4 Test Location ...................................................................................................................................... 6 3.5 Test Facility ........................................................................................................................................ 6 3.6 Deviation from Standards ................................................................................................................... 6 3.7 Abnormalities from Standard Conditions ........................................................................................... 6 4 FCC Radiofrequency radiation exposure limits .................................................................................... 7 4.1 Blanket 1 mW Blanket Exemption ...................................................................................................... 7 4.2 MPE-based Exemption ...................................................................................................................... 7 4.3 SAR-based Exemption ....................................................................................................................... 8 5 Measurement and Calculation ............................................................................................................... 10 5.1 Maximum transmit power ................................................................................................................. 10 5.2 RF Exposure Calculation ................................................................................................................. 10 6 EUT Constructional Details (EUT Photos) ........................................................................................... 11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR250800377103 Page: 4 of 11 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power supply: DC 5V from adapter input AC 120V/60Hz Lithium-Ion Polymer Battery: 3.7V 300mAh rechargeable battery which charged by USB port Cable(s): USB cable: 60cm unshielded Cable Loss (for RF conducted test): 0.7dB Operation Frequency: 2402MHz to 2480MHz Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Data rate: 1Mbps Antenna Type: Monopole Antenna Antenna Gain: 0dBi Series No.: 199347079258 Bluetooth Version: FCC_assist_1.0.4 Power Setting: 5 Remark:The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. Declaration of EUT Family Grouping: Model No.: TB5R01, TB5R05,TB5R06,TB5R11,TB5R13,IBLR01, IBLR05,IBLR06, IBLR11,IBLR13 Only the model TB5R01 was tested. According to the declaration from the applicant, the electrical circuit design, layout, components used, internal wiring and functions were identical for the above models, with only difference on model name, color and strap style. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR250800377103 Page: 5 of 11 3.3 Separation Distance Minimum test separation distance: 5mm Remark: This minimum test separation distance is determined by the smallest distanc…

Text truncated - open the document above for the full version.

Antenna Specification for Approval Product Specification A. ElectricalCharacteristics Frequency 2400MHz ~2500MHz VSWR<3.0 Efficiency >30% Impedance 50 Ohm Polarization Line Gain 0DBi B. Material & MechanicalCharacteristics Material of Radiator Cu Cable Type 1.0 19P 红 Connector Type : NO Dimension C. Environmental Operation Temperature - 30 °C ~ + 80 ° CStorage Temperature - 30 ° C~+ 85 °C Test Equipment & Conditions 1.NetworkAnalyzers: Agilent 8753D 5071C 2.Communications TestSet: Agilent E5525C 3.3D Chamber TestSystem Effiency& Gain Radiation Pattern:

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR250800377102 Page: 1 of 59 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2508003771AT Applicant: AX Technologies LLC Address of Applicant: 1441 Broadway 27th Floor, New York,10018 United States Manufacturer: Shenzhen Gold-East Electronic Co.,Ltd Address of Manufacturer: Floor 6, Building 11, Rundongsheng Industrial Park Longteng Community, Xixiang Street, Bao’an District, Shenzhen, China Factory: Shenzhen Gold-East Electronic Co.,Ltd Address of Factory: Floor 6, Building 11, Rundongsheng Industrial Park Longteng Community, Xixiang Street, Bao’an District, Shenzhen, China Equipment Under Test (EUT): EUT Name: iTOUCH BLOOM smartwatch Model No.: TB5R01, TB5R05,TB5R06,TB5R11,TB5R13,IBLR01, IBLR05,IBLR06, IBLR11,IBLR13   Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: iTOUCH, iTECH FCC ID: 2AJXA-TB5R Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2025-08-27 Date of Test: 2025-08-29 to 2025-09-08 Date of Issue: 2025-09-09 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR250800377102 Page: 2 of 59 Revision Record Version Chapter Date Modifier Remark 01 2025-09-09 Original Authorized for issue by: Martin Li/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR250800377102 Page: 3 of 59 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2020) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2020) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2020) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2020) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Conducted Peak Output Power ANSI C63.10 (2020) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2020) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2020) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2020) Section 6.10.4 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2020) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Declaration of EUT Family Grouping: Model No.: TB5R01, TB5R05,TB5R06,TB5R11,TB5R13,IBLR01, IBLR05,IBLR06, IBLR11,IBLR13 Only the model TB5R01 was tested. According to the declaration from the applicant, the electrical circuit design, layout, components used, internal wiring and functions were identical for the above models, with only difference on model name, color and strap style. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR250800377102 Page: 4 of 59 3 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Test Summary ........................................................................................................................................... 3 3 Contents .................................................................................................................................................... 4 4 General Information .................................................................................................................................. 6 4.1 Details of E.U.T. ................................................................................................................................. 6 4.2 Description of Support Units .............................................................................................................. 6 4.3 Measurement Uncertainty .................................................................................................................. 6 4.4 Test Location ...................................................................................................................................... 8 4.5 Test Facility ........................................................................................................................................ 8 4.6 Deviation from Standards ................................................................................................................... 8 4.7 Abnormalities from Standard Conditions ........................................................................................... 8 5 Equipment List .......................................................................................................................................... 9 6 Radio Spectrum Technical Requirement ............................................................................................. 11 6.1 Antenna Requirement ...................................................................................................................... 11 6.1.1 Test Requirement: ....................................................................................................................... 11 6.1.2 Conclusion ................................................................................................................................... 11 7 Radio Spectrum Matter Test Results ..........................................…

Text truncated - open the document above for the full version.