2AJZYSA250Push Pop Speaker

Push Pop Speaker Instruction Manual Instructions: Besure tofullychargethespeaker before using for the first time. 3.Theunit'sfullperformanceisachievedonly after 2 or 3 completed charge and discharge cycles. guarantee that interference will not occur in a particular installation.If this equipment does cause harmfulinterference toradio ortelevision SA250 Charging the Speaker: 4. To reduce the risk of injury,close supervision is reception,which can be determined by turning the necessary when the product is used near children. equipment off and on,the user is encouraged to Connect theprovidedchargingcabletoa power source and to the Type C port on 5. Do not expose the device to moisture. 6.Do not use the device in excess of its output try to correct the interference by one or more of the following measures:Reorient or relocate the the speaker(3). rating.Overload output above rating may result in receiving antenna.Increase the separation TheLEDindicatorlightwillglowredwhen charging and turn off when fully charged. a risk of fire or injury. 7.Do not use the device if damaged or modified 8.Damaged or modified batteries may exhibit between the equipment and receiver. Connect theequipment into an outlet on a circuit different from that to which the receiver is unpredictable behavior resulting in fire,explosion connected. Bluetooth Setup: or risk of injury. Consult the dealer or an experienced radio/TV Press and hold ON/OFF button,LED Indicator 9.Do not disassemble the device.For repairs,seek technician for help. will then flash BLUE and RED Turn on the Bluetooth function on the mobile a qualified service professional.Incorrect reassemblymayresult ina riskof fire orinjury. This device complies with part 15 of the FCC rules.Operation is subject to the following two device,Select "SA250" pairing name. 10.Do not expose the device to fire or excessive conditions (1) this device may not cause harmful Functions: 1.ON/OFF Button 2. Type-C Port 3. LED Indicator Speakerwillautomaticallypairifthemobile device has been paired before. Press and holdON/OFF buttontoturnoff thedevice. Incoming Calls: If receiving a incoming call,audio will automaticallypause andwillbegintoplay again when call ends. temperature.Exposure to fire to temperatures above 104°F may cause explosion. 11.Ensure that qualified service professionals use only identical replacement parts to ensure product safety. FCC Statement: Changesormodificationsnotexpresslyapproved by the party responsible for compliance could interference and (2) this device must accept any interference received,including interference that may cause undersired operation. The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by NINGBO GECENPROMOTION& GIFTCO.LTD isunder Long press the ON/OFF button to reject the call. void the user's authority to operate the equipment. license. What is included: 1x Speaker 1xUSBtoType-cChargingCable 1x Instruction Manual Tech Specifications Playingtimeup to1.5hr at max volume Charging time:up to 2 hr Paring Name"SA250" SAFETY PRECAUTIONS: WARNING-Whenusingthisproduct,basic precautions should always be followed: 1. Read all the instructions before use. 2. Never store or use this product in temperaturesbelow32°F(0°C)orabove 115°F(45°C). This equipment has been tested and found to complywith thelimitsfora Class Bdigitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment general uses andcanradiateradiofrequencyenergyand if not installed and used in accordance with the instructions,may cause harmful interference to raido communications.However,there is no Othertrademarksand tradenamesarethose of their respective owners. FCC ID：2AJZYSA250 BluetoothListingDeclarationID:Q301856 FCC RF Exposure Warning Statement： This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment can be used in portable exposure conditions MADE IN CHINA

Report No.: AGC07811260701AP03 Page 1 of 4 EXTERNAL PHOTOS All view of EUT Top view of EUT Report No.: AGC07811260701AP03 Page 2 of 4 Bottom view of EUT Front view of EUT Report No.: AGC07811260701AP03 Page 3 of 4 Back view of EUT Left view of EUT Report No.: AGC07811260701AP03 Page 4 of 4 Right view of EUT ****************************************End of Report*************************************

Report No.: AGC07811260701AP02 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC07811260701AP02 Page 2 of 2 AC POWER LINE CONDUCTED TEST SETUP RF CONDUCTED TEST SETUP ****************************************End of Report*************************************

Report No.: AGC07811260701FR01 Page 77 of 80 AC Power Line Conducted Emission Test Test Mode Mode 1 LISN Line Hot Side RESULT: PASS Report No.: AGC07811260701FR01 Page 78 of 80 AC Power Line Conducted Emission Test Test Mode Mode 1 LISN Line Neutral Side RESULT: PASS Report No.: AGC07811260701FR01 Page 79 of 80 Appendix I: Photographs of Test Setup Refer to the Report No.: AGC07811260701AP02 Appendix II: Photographs of Test EUT Refer to the Report No.: AGC07811260701AP03 Report No.: AGC07811260701FR01 Page 80 of 80 Conditions of Issuance of Test Reports 1. All samples and goods are accepted by the Attestation of Global Compliance (Shenzhen) Co., Ltd (the “Company”) solely for testing and reporting in accordance with the following terms and conditions. The company provides its services on the basis that such terms and conditions constitute express agreement between the company and any person, firm or company requesting its services (the “Clients”). 2. Any report issued by Company as a result of this application for testing services (the “Report”) shall be issued in confidence to the Clients and the Report will be strictly treated as such by the Company. It may not be reproduced either in its entirety or in part and it may not be used for advertising or other unauthorized purposes without the written consent of the Company. The Clients to whom the Report is issued may, however, show or send it, or a certified copy thereof prepared by the Company to its customer, supplier or other persons directly concerned. The Company will not, without the consent of the Clients, enter into any discussion or correspondence with any third party concerning the contents of the Report, unless required by the relevant governmental authorities, laws or court orders. 3.The Company shall not be called or be liable to be called to give evidence or testimony on the Report in a court of law without its prior written consent, unless required by the relevant governmental authorities, laws or court orders. 4. In the event of the improper use of the report as determined by the Company, the Company reserves the right to withdraw it, and to adopt any other additional remedies which may be appropriate. 5. Samples submitted for testing are accepted on the understanding that the Report issued cannot form the basis of, or be the instrument for, any legal action against the Company. 6. The Company will not be liable for or accept responsibility for any loss or damage however arising from the use of information contained in any of its Reports or in any communication whatsoever about its said tests or investigations. 7. Clients wishing to use the Report in court proceedings or arbitration shall inform the Company to that effect prior to submitting the sample for testing. 8. The Company is not responsible for recalling the electronic version of the original report when any revision is made to them. The Client assumes the responsibility to providing the revised version to any interested party who uses them. 9. Subject to the variable length of retention time for test data and report stored hereinto as otherwise specifically required by individual accreditation authorities, the Company will only keep the supporting test data and information of the test report for a period of six years. The data and information will be disposed of after the aforementioned retention period has elapsed. Under no circumstances shall we provide any data and information which has been disposed of after retention period. Under no circumstances shall we be liable for damage of any kind, including (but not limited to) compensatory damages, lost profits, lost data, or any form of special, incidental, indirect, consequential or punitive damages of any kind, whether based on breach of contract of warranty, tort (including negligence), product liability or otherwise, even if we are informed in advance of the possibility of such damages. -----End of Report-----

Page 1 of 15 Antenna Test Report Report No.: AGC07811260701PA01 PRODUCT DESIGNATION : Push Pop Speaker BRAND NAME : N/A MODEL NAME : SA250, IT440 APPLICANT : Ningbo Gecen Promotion & Gift Co., Ltd DATE OF ISSUE : Jul. 27, 2026 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC07811260701PA01 Page 2 of 15 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jul. 27, 2026 Valid Initial Release Report No.: AGC07811260701PA01 Page 3 of 15 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Technical Information ...................................................................................................................... 5 3. Test Summary List .......................................................................................................................................... 5 4. Test Environment ............................................................................................................................................ 6 4.1 Address of The Test Laboratory ................................................................................................................ 6 4.2 Test Facility ................................................................................................................................................ 6 4.3 Environmental Conditions ......................................................................................................................... 7 4.4 Measurement Uncertainty ......................................................................................................................... 7 4.5 List of Equipment Used ............................................................................................................................. 7 5. Antenna Passive Measurement Results ....................................................................................................... 8 5.1 Test Setup .................................................................................................................................................. 8 5.2 VSWR Test Result ..................................................................................................................................... 9 5.3 Gain and Efficiency Test Result .............................................................................................................. 10 5.4 Radiation Pattern Diagram ...................................................................................................................... 11 Appendix I: Photographs of Test Setup .......................................................................................................... 13 Appendix II: Photographs of Test EUT ........................................................................................................... 14 Report No.: AGC07811260701PA01 Page 4 of 15 1. General Information Applicant Ningbo Gecen Promotion & Gift Co., Ltd Address B106-109, NO.535 QINGSHUIQIAO ROAD, HI-TECH ZONE, Ningbo, China Manufacturer Ningbo Zhenhai Aisen Plastic Manufacturing Co., Ltd. Address Room 130, Building 2, No. 129,Qiancheng Road, Jiaochuan Street, Zhenhai District, Ningbo City, Zhejiang, China Factory N/A Address N/A Product Designation Push Pop Speaker Brand Name N/A Test Model SA250 Series Model(s) IT440 Difference Description All the same except for the model name. Date of receipt of test item Jul. 09, 2026 Date of Test Jul. 09, 2026 to Jul. 27, 2026 Test Report Form No AGCER-OTA- Passive -V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Thea Huang (Project Engineer) Jul. 27, 2026 Reviewed By Bibo Zhang (Reviewer) Jul. 27, 2026 Approved By Angela Li (Authorized Officer) Jul. 27, 2026 Report No.: AGC07811260701PA01 Page 5 of 15 2. Product Technical Information Frequency Range 2400MHz-2500MHz Test Frequency 2400MHz;2410MHz,2420MHz,2430MHz,2440MHz,2450MHz, 2460MHz,2470MHz,2480MHz,2490MHz, 2500MHz Antenna Type PCB Antenna Dimensions 2mm*12mm Impedance 50Ω Maximum test values Gain: 0.587dBi; Efficiency: 12.148%; VSWR: 1.112:1 3. Test Summary List NO. Test item Remark 1 VSWR -- 2 Gain and efficiency -- 3 Radiation pattern -- Report No.: AGC07811260701PA01 Page 6 of 15 4. Test Environment 4.1 Address of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 4.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and E…

Text truncated - open the document above for the full version.

Page 1 of 80 FCC Test Report Report No.: AGC07811260701FR01 FCC ID : 2AJZYSA250 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Push Pop Speaker BRAND NAME : N/A MODEL NAME : SA250, IT440 APPLICANT : Ningbo Gecen Promotion & Gift Co., Ltd DATE OF ISSUE : Jul. 27, 2026 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC07811260701FR01 Page 2 of 80 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jul. 27, 2026 Valid Initial Release Report No.: AGC07811260701FR01 Page 3 of 80 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ................................................................................................................... 6 2.2 Test Frequency List ................................................................................................................................... 6 2.3 Related Submittal(S) / Grant (S) ............................................................................................................... 7 2.4 Test Methodology ...................................................................................................................................... 7 2.5 Receiver Input Bandwidth ......................................................................................................................... 7 2.6 Equally Average Use of Frequencies and Behaviour................................................................................ 7 2.7 Pseudorandom Frequency Hopping Sequence ........................................................................................ 8 2.8 Special Accessories .................................................................................................................................. 9 2.9 Equipment Modifications ........................................................................................................................... 9 2.10 Antenna Requirement ............................................................................................................................. 9 3. Test Environment .......................................................................................................................................... 10 3.1 Address of The Test Laboratory .............................................................................................................. 10 3.2 Test Facility .............................................................................................................................................. 10 3.3 Environmental Conditions ....................................................................................................................... 11 3.4 Measurement Uncertainty ....................................................................................................................... 11 3.5 List of Equipment Used ........................................................................................................................... 12 4. System Test Configuration ........................................................................................................................... 14 4.1 EUT Configuration ................................................................................................................................... 14 4.2 EUT Exercise ........................................................................................................................................... 14 4.3 Configuration of Tested System .............................................................................................................. 14 4.4 Equipment Used in Tested System ......................................................................................................... 15 4.5 Summary of Test Results ........................................................................................................................ 16 5. Description of Test Modes ........................................................................................................................... 17 6. RF Output Power Measurement .................................................................................................................. 19 6.1 Provisions Applicable .............................................................................................................................. 19 6.2 Measurement Procedure ......................................................................................................................... 19 6.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 19 6.4 Measurement Result ............................................................................................................................... 20 7. 20dB Bandwidth and 99% Occupied Bandwidth Measurement ............................................................... 26 7.1 Provisions Applicable .............................................................................................................................. 26 7.2 Measurement Procedure ......................................................................................................................... 26 7.3 Measurement Setup (Block Diagram of Configuration) .......................................................................... 26 7.4 Measurement Results ............................................................................................................................. 27 8. Conducted Band Edge and Out-of-Band Emissions ......................…

Text truncated - open the document above for the full version.

Page 1 of 10 RF Exposure Report Report No.: AGC07811260701FH01 FCC ID : 2AJZYSA250 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Push Pop Speaker BRAND NAME : N/A MODEL NAME : SA250, IT440 APPLICANT : Ningbo Gecen Promotion & Gift Co., Ltd DATE OF ISSUE : Jul. 27, 2026 STANDARD(S) : FCC Part 2 Subpart J §2.1093 FCC KDB 447498 D01 V06 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC07811260701FH01 Page 2 of 10 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jul. 27, 2026 Valid Initial Release Report No.: AGC07811260701FH01 Page 3 of 10 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Portable Device Evaluation Method and Limit ............................................................................................. 8 5. Measurement Results ..................................................................................................................................... 9 6. Measurement Evaluation ................................................................................................................................ 9 Report No.: AGC07811260701FH01 Page 4 of 10 1. General Information Applicant Ningbo Gecen Promotion & Gift Co., Ltd Address B106-109, NO.535 QINGSHUIQIAO ROAD, HI-TECH ZONE, Ningbo, China Manufacturer Ningbo Zhenhai Aisen Plastic Manufacturing Co., Ltd. Address Room 130, Building 2, No. 129, Qiancheng Road, Jiaochuan Street, Zhenhai District, Ningbo City, Zhejiang, China Factory N/A Address N/A Product Designation Push Pop Speaker Brand Name N/A Test Model SA250 Series Model(s) IT440 Difference Description All the same except for the model name. Date of receipt of test item Jul. 09, 2026 Date of Test Jul. 09, 2026 to Jul. 27, 2026 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Thea Huang (Project Engineer) Jul. 27, 2026 Reviewed By Bibo Zhang (Reviewer) Jul. 27, 2026 Approved By Angela Li (Authorized Officer) Jul. 27, 2026 Report No.: AGC07811260701FH01 Page 5 of 10 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) Bluetooth: 2.402GHz ~ 2.480GHz Other: Hardware Version SC-2511143 V2 Software Version V1.0 Modulation Type BR GFSK, EDR π /4-DQPSK, 8DPSK Maximum Transmitter Power -3.845dBm Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation PCB Antenna Antenna Gain 0.587dBi Minimum Assessment Distance 5mm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC07811260701FH01 Page 6 of 10 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 101 & 201, Building 19(B5), Junfeng Industrial Park, Chongqing Road, P.R.C. 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from the IC is maintained in our files with Registration 24842. Report No.: AGC07811260701FH01 Page 7 of 10 3.3 Environmental Conditions NORMAL CONDITIONS Temperature range (°C) 15 - 35 Relative humidity range 20 % - 75 % Pressure range (kPa) 86 - 106 Power supply DC 3.7V by battery or DC 5V by adapter Note: The Extreme Temperature and Extreme Voltages declared by the manufacturer. Report No.: AGC07811260701FH01 Page 8 of 10 4. Portable Device Evaluation Method and Limit Following FCC KDB 447498 D01 “Genera…

Text truncated - open the document above for the full version.

Report No.: AGC07811260701AP03 Page 1 of 3 INTERNAL PHOTOS Open view of EUT Internal view-1 of EUT Report No.: AGC07811260701AP03 Page 2 of 3 Internal view-2 of EUT Internal view-3 of EUT BT Antenna Report No.: AGC07811260701AP03 Page 3 of 3 Port view of EUT Battery view of EUT ****************************************End of Report*************************************

FCC ID Label Location 30mm&30mm FCC ID: 2AJZYSA250 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: Ningbo Gecen Promotion & Gift Co., Ltd Address: B106-109, NO.535 QINGSHUIQIAO ROAD, HI-TECH ZONE, Ningbo, China Product Name: Push Pop Speaker Model Number: SA250, IT440 FCC Identifier: 2AJZYSA250 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: ASON YING Date: Jul. 27, 2026 Title: Manager Signature of applicant:

TCB CALL página 1 File FCC ID: 2AJZYSA250 Please upload an exhibit that explains how does the TCB verify the new agent information: 1- Is the address of the agent a valid physical US mailing address (not a US post office box, not a virtual mailbox, not P.O. Boxes, not a vacant lot, not a public building, etc.) ○ We have checked if the address exists in a real and potential building (Google maps) + official US register, after this verification and the evidence below we can guarantee the following: not a US post office box not a virtual mailbox not P.O. Boxes not a vacant lot not a public building(note) ► We checked the FCC FRN Search based on the information provided by the grantee. On the official register from : https://bizfileonline.sos.ca.gov/search/business TCB CALL página 2 TCB CALL página 3 TCB CALL página 4 In google maps: TCB CALL página 5 ► CONCLUSION by TCB: The ASOP defined and provided by grantee is VALID and confirmed. Therefore the exhibit "C5266091_X23_Ed1_US_Agent_Letter" included in the file is ok. 2- Is the agent physically located at that valid US address such that the agent can be legally served at that address? Yes , check above 3- Has the listed agent clearly agreed in writing to serve as the agent for the grantee at that address? Yes, it is included in the exhibit "C5266091_X23_Ed1_US_Agent_Letter" >

Ningbo Gecen Promotion & Gift Co., Ltd B106-109, NO.535 QINGSHUIQIAO ROAD, HI-TECH ZONE, Ningbo, China Explanation of differences between product …

Text truncated - open the document above for the full version.