2AKC6-AX3010Wireless USB Adapter

Please read the manual before use (If you have any questions, please consult customer service) Wireless Adapter Quick installation Step 2 Driver Installation Step 3 Wireless Connection Step 1 Hardware connection Please insert the usb adapter directly into the computer's USB port. Laptop Or 802.11ax WiFiAdapter PC Note: When using the desktop PC,it is recommended to connect the rear interface of the computer chassis,the effect is better! (Most of the desktop computer's front USB interface is underpowered or unavailable) Applicable system:Windows 7,10,11 Installation Guide 1. Please use the U disk to install the driver before use, the driver name is "Setup.exe" and follow the direction to finish the installation 2.After the installation is completed.click to restart the computer 3.After restarting the computer, connect to WiFi. Notice: 1. The U disk cannot be recognized,or the file is damaged Please log in to the website to get the installation package,URL https://www.dropbox.com/s/k6n1ehtjmqiz6ea/X.rar?dl=0 2.If there is a computer firewall,or a virus is displayed,the anti-virus software does not recognize the driver software Please turn off the antivirus software first and then start the nstaller 3. If it cannot be used after installation1) Replace the USB port, or use the USB port on the back of the main computer2) After deleting all network card drivers, reinstall the drivers 1.Click on the Wi-Fiicon on the taskbar; 2.Select SSID connection. Veuillez lire le manuel d'utilisation avant de I'utiliser(Sivous avez des questions, veuillez consulter le service clientèle) Adaptateur sans fillnstallation rapide Etape 1 Connexion matérielle Veuillez inserer l'adaptateur USB directement dans le port USB de l'ordinateur □ □ Ou Adaptateur WiFi802.11ax PC Remarque:Lorsque vous utilisezle PC de bureau,ilestrecommandé de connecter l'interface arriere du boitier de l'ordinateur,l'effet est meilleur (La plupart des interfaces USB en facade des ordinateurs de bureau son sous-alimentees ou indisponibles). Etape 2Installation du pilote Systeme applicable:Windows 7,10,11 Guide d'installation 1.Veuillez utiliserle disque U pourinstallerle pilote avant utilisation, le nom du pilote est "Setup.exe"et suivezles instructions pour terminerl'installation. 2. Une fois I'installation terminée, cliquez pour redemarrert'ordinateur. 3.Apres avoir redemarre l'ordinateur, connectez-vous au WiFi. Remarques; 1.Sile disque U ne peut pas etre reconnu ou sile fichierest endommage,veuillez vous connecter au site Web pour obtenirle package d'installation,URL: https://www.dropbox.com/s/k6n1ehtjmqiz6ea/X.rar?dl=0 2.Sil'ordinateur dispose d'un pare-feu ou affiche un virus et que le logiciel antivirus ne reconnait pas le logiciel du pilote, veuillez d'abord desactiverle logiciel antivirus,puislancer le programme d'installation. 3.S'il ne peut pas etre utilise apres l'installation1)Remplacez le port USB,ou utilisezle port USB al'arriere del'ordinateur principal.2)Reinstallez le pilote apres avoir supprimé tous les pilotes de la carte reseau. Etape 3 Connexion sans fil 1.Cliquez surl'icone Wi-Fidans la barre des taches. 2.Selectionnez la connexion SSID. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The frequency stability of all transmission frequencies of U-NII-1 and U-NII -3 meets the 47 CFR FCC Part15.407(g) requirements, and the manufacturer states that their transmissions remain within the U-NII-1 and U-NII -3 bands.

SHEN ZHEN XIN HUA TIAN TECHNOLOGY CO., LTD 3Floor, B Buliding, DaHong Industrial Park, GuangMin District, Shenzhen City, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 05-05-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AKC6-AX3010 [SHEN ZHEN XIN HUA TIAN TECHNOLOGY CO., LTD] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) (Carmen Sun)

SHEN ZHEN XIN HUA TIAN TECHNOLOGY CO., LTD 3Floor, B Buliding, DaHong Industrial Park, GuangMin District, Shenzhen City, China Date: Apr. 13, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AKC6-AX3010 US Agent – Attestation Statement / Part 2.911(d)(7) [SHEN ZHEN XIN HUA TIAN TECHNOLOGY CO., LTD] certifies, that as of [Apr. 13, 2023], we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2AKC6-AX3010. [SHEN ZHEN XIN HUA TIAN TECHNOLOGY CO., LTD], accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of [SHEN ZHEN XIN HUA TIAN TECHNOLOGY CO., LTD] for FCC ID: 2AKC6-AX3010. Designated Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company: [SHEN ZHEN XIN HUA TIAN TECHNOLOGY CO., LTD] Designated Agent: FCC US Agent, LLC Company Representative: [Carmen Sun] Tel: 0755-83740554 Email: [email protected] Designated Agent Representative: Tim Payne Signature: Signature:

SHEN ZHEN XIN HUA TIAN TECHNOLOGY CO., LTD 3Floor, B Buliding, DaHong Industrial Park, GuangMin District, Shenzhen City, China May 05, 2023 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID : 2AKC6-AX3010 Model Number: AX3010, AX3008 To Whom It May Concern: We, The SHEN ZHEN XIN HUA TIAN TECHNOLOGY CO., LTD hereby declare that the models are identical except the model name. Except for the different above, no other modification is performed. Sincerely, Signature: Contact person: Carmen Sun

SHEN ZHEN XIN HUA TIAN TECHNOLOGY CO., LTD 3Floor, B Buliding, DaHong Industrial Park, GuangMin District, Shenzhen City, China Agent Authorization Company: SHEN ZHEN XIN HUA TIAN TECHNOLOGY CO., LTD Address: 3Floor, B Buliding, DaHong Industrial Park, GuangMin District, Shenzhen City, China Product Name: Wireless USB Adapter Model Number(s): AX3010, AX3008 Product Description: Wireless USB Adapter We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2023-05-05 Name: Carmen Sun Company: SHEN ZHEN XIN HUA TIAN TECHNOLOGY CO., LTD

Report No.: AGC00688230406AP02 Page 1 of 3 EXTERNAL PHOTOS TOP VIEW OF EUT BOTTOM VIEW OF EUT Report No.: AGC00688230406AP02 Page 2 of 3 FRONT VIEW OF EUT BACK VIEW OF EUT Report No.: AGC00688230406AP02 Page 3 of 3 LEFT VIEW OF EUT RIGHT VIEW OF EUT ****************************************End of Report*************************************

FCC ID Label Location 10mm&30mm FCC ID: 2AKC6-AX3010

Report No.: AGC00688230406AP02 Page 1 of 3 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) OPEN VIEW OF EUT (FIGURE 2) Report No.: AGC00688230406AP02 Page 2 of 3 OPEN VIEW OF EUT (FIGURE 3) INTERNAL VIEW OF EUT (FIGURE 1) Report No.: AGC00688230406AP02 Page 3 of 3 INTERNAL VIEW OF EUT (FIGURE 2) ANTENNA OF EUT ****************************************End of Report************************************* Antenna 1: 2.4GWIFI&5GWIFI Antenna 2: 2.4GWIFI&5GWIFI

RF EXPOSURE EVALUATION 1. PRODUCT INFORMATION FCC ID 2AKC6-AX3010 Product Description Wireless USB Adapter Model Name AX3010, AX3008 Frequency Band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / WLAN: 5.745GHz ~ 5825GHz Bluetooth: 2.402GHz ~ 2.480GHz Others (NFC:13.56MHz) Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Gain 2.4GWIFI: ANT 1: 1.34dBi; ANT 2: 2.11dBi 5GWIFI: Ant 1: 4.44dBi; Ant 2: 5.46dBi Minimum Assessment Distance 5mm Evaluation Applied MPE Evaluation SAR Evaluation Evaluation Result Pass 2. PORTABLE DEVICE EVALUATION METHOD AND LIMIT Following FCC KDB 447498 D01 “General SAR test exclusion guidance” The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where  f(GHz) is the RF channel transmit frequency in GHz.  Power and distance are rounded to the nearest mW and mm before calculation.  The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50mm) ( f(MHz)/150)] mW, at 100MHz to 1500 MHz; b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)-10] mW at > 1500 MHz and ≤6 GHz; 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by 1/2 for test separation distances ≤ 50 mm. c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any test results to be acceptable. 3. MEASUREMENT RESULT Test Mode Channel Frequency (MHz) Max Output power (dBm) Max Output power (mW) Calculation Value (Note 1) Limit Value OFDM 2.4G WLAN ANT 1 2422 6.48 4.446 1.384 3.0 5G WLAN ANT 2 5200 5.00 3.162 1.442 3.0 5G MIMO 5200 8.01 6.324 2.884 3.0 DSSS 2.4G WLAN ANT 2 2412 6.13 4.102 1.274 3.0 OFDMA 2.4G WLAN MIMO 2422 9.23 8.375 2.607 3.0 5G WLAN ANT 1 5210 5.49 3.540 1.616 3.0 Note 1: Calculation Value =[(max. power of channel, mW)/(min. test separation distance, mm)] ·[√f(GHz)]. Fox example: 6.324/5*√5.200=2.884≤ 3.0 4. CONCLUSION Since Source-base time average power is below SAR test exclusion power thresholds, the SAR evaluation is not required.

Antenna Report Specification Dimensions / Impedance 50Ω Test environment Free space Spectrum WIFI Freq. Range 2.4-2.5GHz 5.0-5.9 GHz Antenna type External Antenna VSWR 2.4-2.5GHz 5.0-5.9 GHz < 2.0 Gain Antenna 1 2.4-2.5GHz: 1.34dBi(Peak gain) 5.0~5.9 GHz : 4.44dBi(Peak gain) Antenna 2 2.4-2.5GHz: 2.11dBi(Peak gain) 5.0~5.9 GHz : 5.46dBi(Peak gain) Model YS030-0127 Brand N/A Manufacturer Shenzhen Yu Sheng Communications Electronics co., LTD Antenna 1 Frequency/MHz MaxGain/dBi Efficiency / % 2400 1.24 62.66 2405 1.34 60.81 2410 1.02 60.12 2415 1.01 58.48 2420 0.97 57.41 2425 0.97 55.72 2430 0.9 55.08 2435 1.04 53.21 2440 0.95 52.6 2445 0.98 51.17 2450 1.05 50.23 2455 1.06 49.43 2460 0.93 48.87 2465 1.04 47.1 2470 0.96 47.53 2475 0.81 46.13 2480 1.02 46.45 2485 1.22 46.03 2490 1.27 46.77 2495 1.13 46.67 2500 1.23 49.09 5000 1.04 48.53 5050 1.28 52.72 5100 1.11 54.45 5150 1.16 59.29 5200 1.11 60.39 5250 1.13 60.53 5300 2.18 61.52 5350 2.71 60.39 5400 3.06 56.75 5450 3.41 57.81 5500 3.69 56.36 5550 3.88 59.7 5600 4.08 60.39 5650 4 63.1 5700 4.23 64.12 5750 4.19 70.79 5800 4.43 72.11 5850 3.89 73.45 5900 4.44 76.03 Antenna 2 Frequency/MHz MaxGain/dBi Efficiency / % 2400 1.57 76.74 2405 1.76 76.03 2410 1.46 75.51 2415 1.52 74.47 2420 1.51 73.96 2425 1.58 72.78 2430 1.61 72.28 2435 1.82 71.45 2440 1.8 70.96 2445 1.9 69.98 2450 2.02 69.82 2455 2.01 69.5 2460 1.87 69.18 2465 1.83 68.23 2470 1.87 68.71 2475 1.72 67.45 2480 1.9 67.61 2485 1.94 66.99 2490 1.83 66.83 2495 1.93 65.31 2500 2.11 66.07 5000 0.7 60.81 5050 0.61 60.39 5100 0.76 55.34 5150 0.2 50.82 5200 0.18 48.08 5250 0 46.13 5300 -0.16 44.16 5350 -0.21 44.57 5400 -0.38 44.36 5450 0.22 49.2 5500 0.27 49.89 5550 1.28 55.34 5600 2.11 59.29 5650 2.97 62.52 5700 3.53 65.77 5750 4.47 72.11 5800 4.8 75.16 5850 5.24 75.51 5900 5.46 78.89 Radiation Pattern Antenna 1 Antenna 2 Antenna：

Page 1 of 184 FCC Test Report Report No.: AGC00688230406FE04 FCC ID : 2AKC6-AX3010 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Wireless USB Adapter BRAND NAME : N/A MODEL NAME : AX3010, AX3008 APPLICANT : SHEN ZHEN XIN HUA TIAN TECHNOLOGY CO., LTD DATE OF ISSUE : May. 04, 2023 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC00688230406FE04 Page 2 of 184 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / May. 04, 2023 Valid Initial Release Report No.: AGC00688230406FE04 Page 3 of 184 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY .................................................................................................................. 5 2. GENERAL INFORMATION .............................................................................................................................. 6 2.1. PRODUCT DESCRIPTION ........................................................................................................................ 6 2.2. TABLE OF CARRIER FREQUENCYS ...................................................................................................... 7 2.3. IEEE 802.11N MODULATION SCHEME ................................................................................................... 8 2.4. IEEE 802.11AX MODULATION SCHEME ................................................................................................. 9 2.5. RELATED SUBMITTAL(S) / GRANT (S) ................................................................................................. 11 2.6. TEST METHODOLOGY ........................................................................................................................... 11 2.7. SPECIAL ACCESSORIES ....................................................................................................................... 11 2.8. EQUIPMENT MODIFICATIONS .............................................................................................................. 11 2.9. ANTENNA REQUIREMENT .................................................................................................................... 11 2.10. DESCRIPTION OF AVAILABLE ANTENNAS ....................................................................................... 12 3. MEASUREMENT UNCERTAINTY ................................................................................................................. 13 4. DESCRIPTION OF TEST MODES ................................................................................................................. 14 5. SYSTEM TEST CONFIGURATION ................................................................................................................ 15 5.1. CONFIGURATION OF EUT SYSTEM ..................................................................................................... 15 5.2. EQUIPMENT USED IN EUT SYSTEM .................................................................................................... 15 5.3. SUMMARY OF TEST RESULTS ............................................................................................................. 15 6. TEST FACILITY .............................................................................................................................................. 16 7. RF OUTPUT POWER MEASUREMENT........................................................................................................ 17 7.1 MEASUREMENT LIMITS ......................................................................................................................... 17 7.2 MEASUREMENT PROCEDURE .............................................................................................................. 17 7.3 MEASUREMENT SETUP (BLOCK DIAGRAM OF CONFIGURATION) .................................................. 17 7.4 MEASUREMENT RESULT ....................................................................................................................... 18 8. 6DB BANDWIDTH MEASUREMENT ............................................................................................................ 20 8.1 MEASUREMENT LIMITS ......................................................................................................................... 20 8.2 MEASUREMENT PROCEDURE .............................................................................................................. 20 8.3 MEASUREMENT SETUP (BLOCK DIAGRAM OF CONFIGURATION) .................................................. 20 8.4 MEASUREMENT RESULTS ..................................................................................................................... 21 9. CONDUCTED SPURIOUS EMISSION........................................................................................................... 59 9.1 MEASUREMENT LIMIT ............................................................................................................................ 59 9.2 MEASUREMENT PROCEDURE .............................................................................................................. 59 9.3 MEASUREMENT SETUP (BLOCK DIAGRAM OF CONFIGURATION) .................................................. 59 Report No.: AGC00688230406FE04 Page 4 of 184 9.4 MEASUREMENT RESULTS ..................................................................................................................... 60 10. POWER SPECTRAL DENSITY.................................................................................................................. 102 10.1 MEASUREMENT LIMITS ..................................................................................................................... 102 10.2 MEASUREMENT PROCEDURE .......................................................................................................... 102 10.3 MEASUREMENT SETUP (BLOCK DIAGRAM OF CONFIGURATION) ...........................................…

Text truncated - open the document above for the full version.

Report No.: AGC00688230406FE04 Page 58 of 184 Test_Graph_802.11ax40_ANT2_2437_MCS0_DTSBW Test_Graph_802.11ax40_ANT2_2452_MCS0_DTSBW Report No.: AGC00688230406FE04 Page 59 of 184 9. CONDUCTED SPURIOUS EMISSION 9.1 MEASUREMENT LIMIT Limits and Measurement Result Applicable Limits Measurement Result Test Data Criteria In any 100 kHz Bandwidth Outside the frequency band in which the spread spectrum intentional radiator is operating, the radio frequency power that is produce by the intentional radiator shall be at least 20 dB below that in 100KHz bandwidth within the band that contains the highest level of the desired power. In addition, radiation emissions which fall in the restricted bands, as defined in §15.205(a), must also comply with the radiated emission limits specified in§15.209(a)) At least -20dBc than the limit Specified on the Bottom Channel PASS At least -20dBc than the limit Specified on the Top Channel PASS 9.2 MEASUREMENT PROCEDURE 1. Connect EUT RF output port to the Spectrum Analyzer through an RF attenuator 2. Set the EUT Work on the top, the Middle and the bottom operation frequency individually. 3. Set the Span = wide enough to capture the peak level of the in-band emission and all spurious emissions from the lowest frequency generated in the EUT up through the 10th harmonic. 4. RBW = 100 kHz; VBW= 300 kHz; Sweep = auto; Detector function = peak.(Test frequency below 1GHz) 5. RBW = 1 MHz; VBW= 3 MHz; Sweep = auto; Detector function = peak.(Test frequency Above 1GHz) 6. Set SPA Trace 1 Max hold, then View. 7. Mark the maximum useless stray point and compare it with the limit value to record the result. 9.3 MEASUREMENT SETUP (BLOCK DIAGRAM OF CONFIGURATION) Report No.: AGC00688230406FE04 Page 60 of 184 9.4 MEASUREMENT RESULTS Test Graphs of Spurious Emissions in Non-Restricted Frequency Bands Test_Graph_802.11b_ANT1_2412_1Mbps_Lower Band Emissions Test_Graph_802.11b_ANT1_2412_1Mbps_Higher Band Emissions Report No.: AGC00688230406FE04 Page 61 of 184 Test_Graph_802.11b_ANT1_2437_1Mbps_Lower Band Emissions Test_Graph_802.11b_ANT1_2437_1Mbps_Higher Band Emissions Report No.: AGC00688230406FE04 Page 62 of 184 Test_Graph_802.11b_ANT1_2462_1Mbps_Lower Band Emissions Test_Graph_802.11b_ANT1_2462_1Mbps_Higher Band Emissions Report No.: AGC00688230406FE04 Page 63 of 184 Test_Graph_802.11g_ANT1_2412_6Mbps_Lower Band Emissions Test_Graph_802.11g_ANT1_2412_6Mbps_Higher Band Emissions Report No.: AGC00688230406FE04 Page 64 of 184 Test_Graph_802.11g_ANT1_2437_6Mbps_Lower Band Emissions Test_Graph_802.11g_ANT1_2437_6Mbps_Higher Band Emissions Report No.: AGC00688230406FE04 Page 65 of 184 Test_Graph_802.11g_ANT1_2462_6Mbps_Lower Band Emissions Test_Graph_802.11g_ANT1_2462_6Mbps_Higher Band Emissions Report No.: AGC00688230406FE04 Page 66 of 184 Test_Graph_802.11n20_ANT1_2412_MCS0_Lower Band Emissions Test_Graph_802.11n20_ANT1_2412_MCS0_Higher Band Emissions Report No.: AGC00688230406FE04 Page 67 of 184 Test_Graph_802.11n20_ANT1_2437_MCS0_Lower Band Emissions Test_Graph_802.11n20_ANT1_2437_MCS0_Higher Band Emissions Report No.: AGC00688230406FE04 Page 68 of 184 Test_Graph_802.11n20_ANT1_2462_MCS0_Lower Band Emissions Test_Graph_802.11n20_ANT1_2462_MCS0_Higher Band Emissions Report No.: AGC00688230406FE04 Page 69 of 184 Test_Graph_802.11n40_ANT1_2422_MCS0_Lower Band Emissions Test_Graph_802.11n40_ANT1_2422_MCS0_Higher Band Emissions Report No.: AGC00688230406FE04 Page 70 of 184 Test_Graph_802.11n40_ANT1_2437_MCS0_Lower Band Emissions Test_Graph_802.11n40_ANT1_2437_MCS0_Higher Band Emissions Report No.: AGC00688230406FE04 Page 71 of 184 Test_Graph_802.11n40_ANT1_2452_MCS0_Lower Band Emissions Test_Graph_802.11n40_ANT1_2452_MCS0_Higher Band Emissions Report No.: AGC00688230406FE04 Page 72 of 184 Test_Graph_802.11ax20_ANT1_2412_MCS0_Lower Band Emissions Test_Graph_802.11ax20_ANT1_2412_MCS0_Higher Band Emissions Report No.: AGC00688230406FE04 Page 73 of 184 Test_Graph_802.11ax20_ANT1_2437_MCS0_Lower Band Emissions Test_Graph_802.11ax20_ANT1_2437_MCS0_Higher Band Emissions Report No.: AGC00688230406FE04 Page 74 of 184 Test_Graph_802.11ax20_ANT1_2462_MCS0_Lower Band Emissions Test_Graph_802.11ax20_ANT1_2462_MCS0_Higher Band Emissions Report No.: AGC00688230406FE04 Page 75 of 184 Test_Graph_802.11ax40_ANT1_2422_MCS0_Lower Band Emissions Test_Graph_802.11ax40_ANT1_2422_MCS0_Higher Band Emissions Report No.: AGC00688230406FE04 Page 76 of 184 Test_Graph_802.11ax40_ANT1_2437_MCS0_Lower Band Emissions Test_Graph_802.11ax40_ANT1_2437_MCS0_Higher Band Emissions Report No.: AGC00688230406FE04 Page 77 of 184 Test_Graph_802.11ax40_ANT1_2452_MCS0_Lower Band Emissions Test_Graph_802.11ax40_ANT1_2452_MCS0_Higher Band Emissions Report No.: AGC00688230406FE04 Page 78 of 184 Test_Graph_802.11b_ANT2_2412_1Mbps_Lower Band Emissions Test_Graph_802.11b_ANT2_2412_1Mbps_Higher Band Emissions Report No.: AGC00688230406FE04 Page 79 of 184 Test_Graph_802.11b_ANT2_2437_1Mbps_Lower Band Emissions Test_Graph_802.11b_ANT2_2437_1Mbps_Higher Band Emissions Report No.: AGC00688230406FE04 Page 80 of 184 Test_Graph_802.11b_ANT2_2462_1Mbps_Lower Band Emissions Test_Graph_802.11b_ANT2_2462_1Mbps_Higher Band Emissions Report No.: AGC00688230406FE04 Page 81 of 184 Test_Graph_802.11g_ANT2_2412_6Mbps_Lower Band Emissions Test_Graph_802.11g_ANT2_2412_6Mbps_Higher Band Emissions Report No.: AGC00688230406FE04 Page 82 of 184 Test_Graph_802.11g_ANT2_2437_6Mbps_Lower Band Emissions Test_Graph_802.11g_ANT2_2437_6Mbps_Higher Band Emissions Report No.: AGC00688230406FE04 Page 83 of 184 Test_Graph_802.11g_ANT2_2462_6Mbps_Lower Band Emissions Test_Graph_802.11g_ANT2_2462_6Mbps_Higher Band Emissions Report No.: AGC00688230406FE04 Page 84 of 184 Test_Graph_802.11n20_ANT2_2412_MCS0_Lower Band Emissions Test_Graph_802.11n20_ANT2_2412_MCS0_Higher Band Emissions Report No.: AGC00688230406FE04 Page 85 of 184 Test_Graph_802.11n20_ANT2_2437_MCS0_Lower Band Emissions Test_Graph_802.11n20_ANT2_2437_MCS0_Higher Band Emissions Report No.: AGC00688230406FE04 Pag…

Text truncated - open the document above for the full version.

Report No.: AGC00688230406FE04 Page 114 of 184 Test_Graph_802.11ax40_ANT1_2437_MCS0_PSD Test_Graph_802.11ax40_ANT1_2452_MCS0_PSD Report No.: AGC00688230406FE04 Page 115 of 184 Test_Graph_802.11b_ANT2_2412_1Mbps_PSD Test_Graph_802.11b_ANT2_2437_1Mbps_PSD Report No.: AGC00688230406FE04 Page 116 of 184 Test_Graph_802.11b_ANT2_2462_1Mbps_PSD Test_Graph_802.11g_ANT2_2412_6Mbps_PSD Report No.: AGC00688230406FE04 Page 117 of 184 Test_Graph_802.11g_ANT2_2437_6Mbps_PSD Test_Graph_802.11g_ANT2_2462_6Mbps_PSD Report No.: AGC00688230406FE04 Page 118 of 184 Test_Graph_802.11n20_ANT2_2412_MCS0_PSD Test_Graph_802.11n20_ANT2_2437_MCS0_PSD Report No.: AGC00688230406FE04 Page 119 of 184 Test_Graph_802.11n20_ANT2_2462_MCS0_PSD Test_Graph_802.11n40_ANT2_2422_MCS0_PSD Report No.: AGC00688230406FE04 Page 120 of 184 Test_Graph_802.11n40_ANT2_2437_MCS0_PSD Test_Graph_802.11n40_ANT2_2452_MCS0_PSD Report No.: AGC00688230406FE04 Page 121 of 184 Test_Graph_802.11ax20_ANT2_2412_MCS0_PSD Test_Graph_802.11ax20_ANT2_2437_MCS0_PSD Report No.: AGC00688230406FE04 Page 122 of 184 Test_Graph_802.11ax20_ANT2_2462_MCS0_PSD Test_Graph_802.11ax40_ANT2_2422_MCS0_PSD Report No.: AGC00688230406FE04 Page 123 of 184 Test_Graph_802.11ax40_ANT2_2437_MCS0_PSD Test_Graph_802.11ax40_ANT2_2452_MCS0_PSD Report No.: AGC00688230406FE04 Page 124 of 184 11. RADIATED EMISSION 11.1 MEASUREMENT LIMITS 15.209(a) Limit in the below table has to be followed Frequencies (MHz) Field Strength (microvolts/meter) Measurement Distance (meters) 0.009~0.490 2400/F(kHz) 300 0.490~1.705 24000/F(kHz) 30 1.705~30.0 30 30 30~88 100 3 88~216 150 3 216~960 200 3 Above 960 500 3 Note: All modes were tested for restricted band radiated emission, the test records reported below are the worst result compared to other modes. 11.2 MEASUREMENT PROCEDURE 1. The EUT was placed on the top of the turntable 0.8 or 1.5 meter above ground. The phase center of the receiving antenna mounted on the top of a height-variable antenna tower was placed 3 meters far away from the turntable. 2. Power on the EUT and all the supporting units. The turntable was rotated by 360 degrees to determine the position of the highest radiation. 3. The height of the broadband receiving antenna was varied between one meter and four meters above ground to find the maximum emissions field strength of both horizontal and vertical polarization. 4. For each suspected emission, the antenna tower was scan (from 1 M to 4 M) and then the turntable was rotated (from 0 degree to 360 degrees) to find the maximum reading. 5. Set the test-receiver system to Peak or CISPR quasi-peak Detect Function with specified bandwidth under Maximum Hold Mode. 6. For emissions above 1GHz, use 1MHz RBW and 3MHz VBW for peak reading. Place the measurement antenna away from each area of the EUT determined to be a source of emissions at the specified measurement distance, while keeping the measurement antenna aimed at the source of emissions at each frequency of significant emissions, with polarization oriented for maximum response. The measurement antenna may have to be higher or lower than the EUT, depending on the radiation pattern of the emission and staying aimed at the emission source for receiving the maximum signal. The final measurement antenna elevation shall…

Text truncated - open the document above for the full version.