2AKI8-19BF18Bluetooth Headset

86(5*8,'(HB600S :,5(/(6667(5(2+($'6(7 4&7&/ Overview In the Box HB600S Stereo Headset V7 Link Bluetooth Dongle Type-C Charging Cable 3.5mm Audio Cable Boom Mic Storage Bag User Guide Previous trackPlay/Pause Next track Rotate to adjust volume Type C charging port Boom microphone Boom mic mute switch Rotate boom mic Answer/End call/Mute/Unmute On/Off/Pairing BluetoothLED Audio Input Internal mic 86(5*8,'(HB600S:,5(/(6667(5(2+($'3+21(6 4&7&/ 02 3. Position the microphone to your preference. How to Wear 1. Insert the detachable Boom Microphone into the 2.5mm receptacle located on the headset. 2. The boom microphone can move to accommodate a user’s preference for right side or left side wear. Mic receptacle 03 Connecting to a PC PC(w/V7’s Bluetooth Dongle)The V7 USB dongle and headset are pre-paired and ready for use. Plug in the USB dongle and power on the headset to enjoy voice and audio performance range of up to 30 meters (100’) line-of sight. If using the PC’s integrated Bluetooth, your range may be limited to 10 meters (33’) and you may need to select ‘V7 HB600S’ for the audio playback device in the operating system’s settings. Operation 04 Slide the switch to the CENTER position Power On Power Off Slide the switch to the position How to connect with the first Bluetooth device. Slide the power switch to the “ “ position and hold until ‘pairing’ heard or the pairing LED flashes, then select V7 HB600S. The LED will flash blue to indicate the headphone is connected, and ‘connected’ is heard. V7 HB600S Bluetooth Bluetooth ON Devices Now discoverable Paired Activate "Bluetooth" in your device‘s settings and select ”V7 HB600S”. Connecting to the second Bluetooth device. Connecting Windows 10 PCs and Macs will automatically recognize and install drivers. Slide the power switch to the "CENTER" position.The LED will flash redand blue when ready to connect. 05 Add bluetooth or other devices bluetoothMouse/Keyboard/Pen off V7 link Audio V7 link Calls with a Smartphone Calls with a Smartphone Siri/Cortana/Assistance Press 1 ×Press 1 ×Press 2 × 10m AnswerEnd CallDecline Press 2 × Charging the Headset 06 Plug the USB-C charging cable into a computer’s USB port. During charging the red LED will light. When fully charged, the LED will turn off. The headset remains on during charging. To power off, the headset’s power switch must be slid to the off position. Plug the USB-C charging cable into a USB wall charger. Plug the optional charging stand into a powered USB port on your PC, docking station or USB wall charger and then dock the headset. It takes approximately 3 hours to fully charge the headset. Muting the Boom Mic: Depress and hold the button for 2 seconds.Muting the internal Mic: (When boom mic is not in use) Depress and hold the call key 2 seconds. Using the charging stand Other Operations 07 SEVEN Product Specifications Battery Status: After the headset is powered on, press the call button briefly to hear the current battery status 100% -75%-50%-25%.Clearing the pairing: While the headset is powered on, press and hold the previous and next track buttons simultaneously for 10 seconds. A pink LED will light for 2 seconds and the headset will then enter pairing mode. Bluetooth version: Bluetooth V5.0Bluetooth Profile: A2DPv1.3.1; AVRCPv1.6; HFPv1.7; HSPv1.2; SPP v1.2; DID v1.3; HID v1.1; PXP v1.0.1;FMP v1.0; BAS v1.0Working Frequency: 2.402GHz-2.480GHzFrequency Response: 99±3dBReceiving sensitivity: >-89dBmBattery type: Lithium polymerMic type and sensitivity: Virtual Microphone -42±3dBHeadphone Driver Size: 30mmBattery capacity: 410mAh DC Input: 5V_500MAFCC ID: 2AKI8-19BF18Charging voltage: 5V/2ABluetooth working range: Up to 30m Talk time: Up to 18 hoursCharging time: Approximately 3 hoursStandby time: Approximately 175 hoursCompatibility: Windows 10, mac OS 10.14 or later,iOS and Android 08 WARNING Headsets can deliver sounds at loud volumes and high-pitched tones. Avoid prolonged use of the headset at excessive sound press ure levels. Please read the safety guidelines below prior to using this headset.Safety informationUse of a headset will impair your ability to hear other sounds. Use caution while using your headset when you are engaging in a ny activity that requires your full attention. This package contains small parts that may be hazardous to children and should be kept out of reach from c hildren. Do not attempt: To dismantle or service the product as this may cause a short circuits or other malfunction which could result in a fire or electric shock. Avoid exposing your product to rain, moisture or other liquids to avoid damage to the product or injury to you. Keep all produc ts, cords, and cables away from operating machinery. Avoid use while operating a motor vehicle. Built-in battery care: Please observe the following if the product contains a battery. Your product is powered by a rechargeabl e battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times but will eventually wear out.Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A product with a hot or cold battery may not work tempora rily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing.Battery warning!CAUTION – The battery used in this product may present a risk of fire or chemical burn if mistreated. Do not attempt to open the product or replace the battery. This will void the warranty. 09 10 FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to oper ate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  This device may not cause harmful interference, and  this device must accept any interference received, including interference that may cause undesired o…

Text truncated - open the document above for the full version.

TOPWAYEMENTERPRISELTD. ModelConfirmationLetter We,TOPWAYEMENTERPRISELTD.certifytheproduct:Bluetoothheadset ModelNo.:19BF18,HB600S,JB19BF18 Theirelectricalcircuitdesign,layout,componentsusedandinternalwiringareidentical, OnlytheColorandmodelnameisdifferent. Signiture: GranteeContact:ZhuangLiang CompanyName:TOPWAYEMENTERPRISELTD. Date:2020-07-07

Date:04/17/2018VCB_F-01:OperatingProceduresForm–FCCConfidentialityv02Page1of1 TOPWAYEMENTERPRISELTD. FederalCommunicationsCommission AuthorizationandEvaluationDivision ConfidentialityRequestregardingapplicationforcertificationofFCCID:2AKI8-19BF18 PursuanttoSections0.457and0.459oftheCommission’sRules,weherebyrequest confidentialtreatmentofinformationaccompanyingthisapplicationasoutlinedbelow: ExhibitTypeFileName 1.BlockDiagram, 2.Schematics, 3.OperationalDescription 1.2AKI8-19BF18-Blockdiagram 2.2AKI8-19BF18-SCH 3.2AKI8-19BF18-Operationaldescription Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarily releasedtothepublic.Thepublicdisclosureofthesematerialsmaybeharmfultothe applicantandprovideunjustifiedbenefitstoitscompetitors. TheapplicantunderstandsthatpursuanttoSection0.457oftheRules,disclosureofthis applicationandallaccompanyingdocumentationwillnotbemadebeforethedateofthe Grantforthisapplication. PursuanttoDA04-1705June15,2004oftheCommission’spublicnotice,wealso requesttemporaryconfidentialtreatmentofinformationaccompanyingthisapplication asoutlinedbelowforaninitialperiodofxxxx(ie-“45”,“90”or“180”)days: ExhibitTypeFileName N/AN/A Signature: Contactname:ZHUANGLIANG Companyname:TOPWAYEMENTERPRISELTD. Address:8FBLOCKBBUILDING6BAONENGS&TPARKLONGHUA,SHENZHENGD,China 518109

Date:04/17/2018VCB_F-01:OperatingProceduresForm–FCCAuthorizationv02Page1of1 TOPWAYEMENTERPRISELTD. FederalCommunicationsCommission AuthorizationandEvaluationDivision 1435OaklandMillsRoad Columbia,MD21046 Date:2020/6/17 SUBJECT:FCCApplicationfor(FCCID:2AKI8-19BF18) ToWhomItMayConcern: We,theundersigned,herebyauthorizeAlisaFengin ShenzhenHuaxiaTesting TechnologyCo.,Ltdat1F.,BlockAofTongshengTechnologyBuilding,HuahuiRoad, DalangStreet,LonghuaDistrict,Shenzhen,Chinaonourbehalf,toapplytotheFederal CommunicationsCommissiononourequipment.Anyandallactscarriedoutby ShenzhenHuaxiaTestingTechnologyCo.,Ltd onourbehalfshallhavethesame effectasactsofourown. ThisistoadvisethatweareinfullcompliancewiththeAnti-DrugAbuseAct.We, theapplicant,arenotsubjecttoadenialoffederalbenefitspursuanttoSection 5301oftheAnti-DrugActof1988,21USC853a,andnopartytotheapplicationis subjecttoadenialoffederalbenefitspursuanttothatsection. Sincerely, (MustbesignedbythepersonthatislistedontheFCCWebsite) Signature: Contactname:ZHUANGLIANG Companyname:TOPWAYEMENTERPRISELTD. Address:8FBLOCKBBUILDING6BAONENGS&TPARKLONGHUA,SHENZHENGD,China518109

FCC ID:2AKI8-19BF18 FCC ID:2AKI8-19BF18 FCC ID:2AKI8-19BF18 FCC ID:2AKI8-19BF18

19BF18 19BF18 19BF18 19BF18

FCC ID:2AKI8-19BF18 FCC ID:2AKI8-19BF18 FCC ID:2AKI8-19BF18 FCC ID:2AKI8-19BF18

Shenzhen Huaxia Testing Technology Co., Ltd 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China Telephone: +86-755-26648640 Fax: +86-755-26648637 Website: www.cqa-cert.com Report Template Version: V04 Report Template Revision Date: 2018-07-06 RF Exposure Evaluation Report The test report is effective only with both signature and specialized stamp, The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CQA, this report can’t be reproduced except in full. Report No.: CQASZ20200600522E-02 Applicant: TOPWAY EM ENTERPRISE LTD. Address of Applicant: 8F BLOCK B BUILDING 6 BAONENG S & T PARK LONG HUA, SHENZHEN GD, China 518109 Equipment Under Test (EUT): EUT Name: Bluetooth headset Model No.: 19BF18, HB600S, JB19BF18 Test Model No.: 19BF18 Brand Name: N/A FCC ID: 2AKI8-19BF18 Standards: 47 CFR Part 1.1307 47 CFR Part 2.1093 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt: 2020-06-12 Date of Test: 2020-06-12 to 2020-06-24 Date of Issue: 2020-06-24 Test Result: PASS* *In the configuration tested, the EUT complied with the standards specified above Tested By： (Tom Chen) Reviewed By: (Sheek Luo) Approved By: (Jack Ai) Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200600522E-02 Page:2 of 6 1 Version Revision History Of Report Report No. Version Description Issue Date CQASZ20200600522E-02 Rev.01 Initial report 2020-06-24 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200600522E-02 Page:3 of 6 2 Contents Page 1 VERSION .....................................................................................................................................................................2 2 CONTENTS .................................................................................................................................................................3 3 GENERAL INFORMATION ......................................................................................................................................4 3.1 CLIENT INFORMATION ...............................................................................................................................................4 3.2 GENERAL DESCRIPTION OF EUT ...............................................................................................................................4 4 SAR EVALUATION ....................................................................................................................................................5 4.1 RF EXPOSURE COMPLIANCE REQUIREMENT ..............................................................................................................5 4.1.1 Standard Requirement .................................................................................................................................5 4.1.2 Limits ..............................................................................................................................................................5 4.1.3 EUT RF Exposure.........................................................................................................................................6 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200600522E-02 Page:4 of 6 3 General Information 3.1 Client Information Applicant: TOPWAY EM ENTERPRISE LTD. Address of Applicant: 8F BLOCK B BUILDING 6 BAONENG S & T PARK LONG HUA, SHENZHEN GD, China 518109 Manufacturer: TOPWAY EM ENTERPRISE LTD. Address of Manufacturer: 8F BLOCK B BUILDING 6 BAONENG S & T PARK LONG HUA, SHENZHEN GD, China 518109 Factory: Shenzhen Jia Hua Li Dian Zi You Xian Gong Si Address of Factory: NO 101,201, BUILDING E, NEW INDUSTRIAL ZONE, SHENZHU ROAD, LIUYUE SHENKENG VILLAGE, HENGGANG, LONGGANG DISTRICT, SHENZHEN CHINA. 3.2 General Description of EUT Product Name: Bluetooth headset Model No.: 19BF18, HB600S, JB19BF18 Test Model No.: 19BF18 Trade Mark: N/A Hardware Version: V1.2 Software Version: Vesion 1_V35 Operation Frequency: 2402MHz~2480MHz Bluetooth Version: V5.0 Modulation Technique: Frequency Hopping Spread Spectrum(FHSS) Modulation Type: GFSK, π/4DQPSK, 8DPSK Number of Channel: 79 Transfer Rate: 1Mbps/2Mbps/3Mbps Hopping Channel Type: Adaptive Frequency Hopping systems Sample Type: Mobile Portable Fix Location Test Software of EUT: Blue test3 (manufacturer declare) Antenna Type: PCB antenna Antenna Gain: 4dBi Power Supply: lithium battery:DC 3.7V, 410mAh, Charge by DC 5.0V Note: Model No.: 19BF18, HB600S, JB19BF18 Only the model 19BF18 was tested, since the electrical circuit design, layout, components used and internal wiring were identical for the above models, with difference being color of appearance and model name. Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200600522E-02 Page:5 of 6 4 SAR Evaluation 4.1 RF Exposure Compliance Requirement 4.1.1 Standard Requirement According to KDB447498D01 General RF Exposure Guidance v06 4.3.1. Standalone SAR test exclusion considerations Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Exclusion Threshold condition, listed below, is satisfied. 4.1.2 Limits The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation 17 The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. …

Text truncated - open the document above for the full version.

Shenzhen Huaxia Testing Technology Co., Ltd 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China Telephone: +86-755-26648640 Fax: +86-755-26648637 Website: www.cqa-cert.com Report Template Version: V04 Report Template Revision Date: 2018-07-06 Test Report The test report is effective only with both signature and specialized stamp, The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CQA, this report can’t be reproduced except in full. Report No.: CQASZ20200600522E-01 Applicant: TOPWAY EM ENTERPRISE LTD. Address of Applicant: 8F BLOCK B BUILDING 6 BAONENG S & T PARK LONG HUA, SHENZHEN GD, China 518109 Equipment Under Test (EUT): EUT Name: Bluetooth headset Model No.: 19BF18, HB600S, JB19BF18 Test Model No.: 19BF18 Brand Name: N/A FCC ID: 2AKI8-19BF18 Standards: 47 CFR Part 15, Subpart C Date of Receipt: 2020-06-12 Date of Test: 2020-06-12 to 2020-06-24 Date of Issue: 2020-06-24 Test Result: PASS* *In the configuration tested, the EUT complied with the standards specified above Tested By： (Tom Chen) Reviewed By: (Sheek Luo) Approved By: (Jack Ai) Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200600522E-01 Page:2 of 102 1 Version Revision History Of Report Report No. Version Description Issue Date CQASZ20200600522E-01 Rev.01 Initial report 2020-06-24 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200600522E-01 Page:3 of 102 2 Test Summary Test Item Test Requirement Test method Result Antenna Requirement 47 CFR Part 15, Subpart C Section 15.203/15.247 (c) ANSI C63.10 (2013) PASS AC Power Line Conducted Emission 47 CFR Part 15, Subpart C Section 15.207 ANSI C63.10 (2013) PASS Conducted Peak Output Power 47 CFR Part 15, Subpart C Section 15.247 (b)(1) ANSI C63.10 (2013) PASS 20dB Occupied Bandwidth 47 CFR Part 15, Subpart C Section 15.247 (a)(1) ANSI C63.10 (2013) PASS Carrier Frequencies Separation 47 CFR Part 15, Subpart C Section 15.247 (a)(1) ANSI C63.10 (2013) PASS Hopping Channel Number 47 CFR Part 15, Subpart C Section 15.247 (a)(1) ANSI C63.10 (2013) PASS Dwell Time 47 CFR Part 15, Subpart C Section 15.247 (a)(1) ANSI C63.10 (2013) PASS Pseudorandom Frequency Hopping Sequence 47 CFR Part 15, Subpart C Section 15.247(b)(4)&TCB Exclusion List (7 July 2002) ANSI C63.10 (2013) PASS Band-edge for RF Conducted Emissions 47 CFR Part 15, Subpart C Section 15.247(d) ANSI C63.10 (2013) PASS RF Conducted Spurious Emissions 47 CFR Part 15, Subpart C Section 15.247(d) ANSI C63.10 (2013) PASS Radiated Spurious emissions 47 CFR Part 15, Subpart C Section 15.205/15.209 ANSI C63.10 (2013) PASS Restricted bands around fundamental frequency (Radiated Emission) 47 CFR Part 15, Subpart C Section 15.205/15.209 ANSI C63.10 (2013) PASS Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200600522E-01 Page:4 of 102 3 Contents Page 1 VERSION .................................................................................................................................................................. 2 2 TEST SUMMARY .................................................................................................................................................... 3 3 CONTENTS .............................................................................................................................................................. 4 4 GENERAL INFORMATION ................................................................................................................................... 5 4.1 CLIENT INFORMATION .......................................................................................................................................... 5 4.2 GENERAL DESCRIPTION OF EUT .......................................................................................................................... 5 4.3 ADDITIONAL INSTRUCTIONS................................................................................................................................. 7 4.4 TEST ENVIRONMENT ............................................................................................................................................ 8 4.5 DESCRIPTION OF SUPPORT UNITS ......................................................................................................................... 8 4.6 STATEMENT OF THE MEASUREMENT UNCERTAINTY ............................................................................................. 9 4.7 TEST LOCATION ................................................................................................................................................. 10 4.8 TEST FACILITY ................................................................................................................................................... 10 4.9 ABNORMALITIES FROM STANDARD CONDITIONS ............................................................................................... 10 4.10 OTHER INFORMATION REQUESTED BY THE CUSTOMER ...................................................................................... 10 4.11 EQUIPMENT LIST ................................................................................................................................................ 11 5 TEST RESULTS AND MEASUREMENT DATA .............................................................................................. 12 5.1 ANTENNA REQUIREMENT ................................................................................................................................... 12 5.2 CONDUCTED EMISSIONS ..................................................................................................................................... 13 5.3 CONDUCTED PEAK OUTPUT POWER ................................................................................................................... 17 5.4 20DB OCCUPY BANDWIDTH ......................................................................…

Text truncated - open the document above for the full version.

FCC ID:2AKI8-19BF18 1 Photographs - EUT Test Setup 1.1 Radiated Emission 9kHz~30MHz: 30MHz~1GHz: FCC ID:2AKI8-19BF18 Above 1GHz: 1.2 Conducted Emission