2AKLI-TP101Jiobit Location Monitor

Regulatory & Safety Notices How to access electronic label: Menu > Settings > About USA: Federal Communications Commission (FCC) statement. This device complies with FCC port 15 FCC Rules. Operation is subject to the following two conditions: l. This device may not cause hormful interference. 2. This device must accept any interference received. including interference that maycause undesired operation FCC warning. Changes or modifications not approved by JIO, Inc. could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Port 15 of the FCC Rules. These limits ore designed to provide reasonable protection against hormful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and. if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. PN: 230-10013-00 Regulatory & Safety Notices Continued However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device meets the FCC requirements for RF exposure in public or uncontrolled environments. Disassembling this product will cause it to malfunction, and is strongly discouraged. This product requires separate collection/recycling at the end of life. Please refer to your local Waste and Recycling regulations.

Letter of Authorization and Anti- Drug Statement Applicant Name: JIO, INC. Address: 30 N Lasalle St. Suite 2630 Chicago, IL 60602 Product Name: JIOBIT LOCATION MONITOR Model Number: TP101 FCC ID: 2AKLI-TP101 W e authorize: CETECOM Inc., to act on our behalf on all matters concerning the above-named equipment. We declare that CETECOM Inc. is allowed to forward all information related to the approval project to the Federal Communications Commission and discuss any issues concerning the approval application. The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. Does the applicant or authorized agent so certify? ☒Yes I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements. Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application. If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time. Signature of Authorized Person Filing: Title: SR. DIRECTOR OPERATIONS Date: 05/01/2023 Sandor Kiss (May 18, 2023 14:17 PDT) FCC LoA Anti Drug Statement v1.0 Final Audit Report2023-05-18 Created:2023-05-18 By:neena kaushik ([email protected]) Status:Signed Transaction ID:CBJCHBCAABAAZxcS570kmXGubLyFoUBdjxtqunEXZggk "FCC LoA Anti Drug Statement v1.0" History Document created by neena kaushik ([email protected]) 2023-05-18 - 4:07:04 AM GMT- IP address: 76.133.189.186 Document emailed to [email protected] for signature 2023-05-18 - 4:07:18 AM GMT Email viewed by [email protected] 2023-05-18 - 9:16:44 PM GMT- IP address: 24.7.124.32 Signer [email protected] entered name at signing as Sandor Kiss 2023-05-18 - 9:17:09 PM GMT- IP address: 24.7.124.32 Document e-signed by Sandor Kiss ([email protected]) Signature Date: 2023-05-18 - 9:17:11 PM GMT - Time Source: server- IP address: 24.7.124.32 Agreement completed. 2023-05-18 - 9:17:11 PM GMT

Federal Communication Commission 7435 Oakland Mills Road Columbia, MD 21046 05/01/2023 Attestation Statement according to 2.911(d)(5)(i) and 2.911(d)(5)(ii) FCC ID: 2AKLI-TP101 TO WHOM IT MAY CONCERN: Hereby we certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Further we certify that, as of the date of the filing of the application, JIO, INC. is not identified on the C overed List as an entity producing “covered” equipment. Sincerely, _______________ JI O, INC. 30 N Lasa lle St. Suite 2630 Chicago IL, 60602 Sandor Kiss [email protected] Signature: Email: Sandor Kiss (May 18, 2023 14:19 PDT) Sandor Kiss Sandor Kiss [email protected] 2.907 (d)(5) - NOT in covered list, Attestation Statement_20230215 Final Audit Report2023-05-18 Created:2023-05-18 By:neena kaushik ([email protected]) Status:Signed Transaction ID:CBJCHBCAABAATvgBJpOLEsN31yybRaxljSriVzLrVv26 "2.907 (d)(5) - NOT in covered list, Attestation Statement_20230 215" History Document created by neena kaushik ([email protected]) 2023-05-18 - 4:04:10 AM GMT- IP address: 76.133.189.186 Document emailed to [email protected] for signature 2023-05-18 - 4:04:29 AM GMT Email viewed by [email protected] 2023-05-18 - 9:18:32 PM GMT- IP address: 24.7.124.32 Signer [email protected] entered name at signing as Sandor Kiss 2023-05-18 - 9:19:07 PM GMT- IP address: 24.7.124.32 Document e-signed by Sandor Kiss ([email protected]) Signature Date: 2023-05-18 - 9:19:09 PM GMT - Time Source: server- IP address: 24.7.124.32 Agreement completed. 2023-05-18 - 9:19:09 PM GMT

Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA 05/01/2023 Attestation Statement according to 2.911(d)(7) FCC ID: 2AKLI-TP101 TO WHOM IT MAY CONCERN: JIO INC. with FCC Registration Number (FRN) 0026096412 Certifies that, as of the date of this filing of the application with the TCB, JIO INC. is our designated US agent for service of process for the above referenced FCC ID. JIO INC. accepts to maintain itself as an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. Sincerely _______________ (signature & company stamp) JIO, INC. 30 N Lasalle St. Suite 2630 Chicago, IL 60602 SANDOR KISS SR. DIRECTOR MANUF. OPERATIONS Sandor Kiss (May 18, 2023 14:16 PDT) Designated US agent for service of process, attestation statement Final Audit Report2023-05-18 Created:2023-05-18 By:neena kaushik ([email protected]) Status:Signed Transaction ID:CBJCHBCAABAAxsMPZIV-aLiGR7j7YwlkxhLIL3QtChc0 "Designated US agent for service of process, attestation stateme nt" History Document created by neena kaushik ([email protected]) 2023-05-18 - 4:13:34 AM GMT- IP address: 76.133.189.186 Document emailed to [email protected] for signature 2023-05-18 - 4:13:50 AM GMT Email viewed by [email protected] 2023-05-18 - 9:15:21 PM GMT- IP address: 24.7.124.32 Signer [email protected] entered name at signing as Sandor Kiss 2023-05-18 - 9:16:19 PM GMT- IP address: 24.7.124.32 Document e-signed by Sandor Kiss ([email protected]) Signature Date: 2023-05-18 - 9:16:21 PM GMT - Time Source: server- IP address: 24.7.124.32 Agreement completed. 2023-05-18 - 9:16:21 PM GMT

30 N Lasalle St. Suite 2630 Chicago, IL 60602 Federa l Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21048 Date: 05/ 01/2023 Subjec t: Request for Permanent Confidentiality FCC ID: 2AKLI-TP101 To Whom It May Concern: In accordance with §0.457(d) and §0.459 of CFR 47, and KDB 726920, JIO, INC. hereby requests permanent confidentiality for documents filed under the following exhibit types: 1.Block Diagram 2.Schematic Diagram 3.Part List 4.Operational Description These items contain detailed system and equipment description and related information about the product which JIO, INC. considers to be proprietary, confidential and a custom design which otherwise would not be released to the public. Since this design is a basis from which future technological products will evolve, JIO, INC. also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. We are aware that exhibit types cover letters, attestations, label document, test reports, RF exposure information (SAR and MPE reports), cannot be requested to be classified confidential and are thus subject to publication, as will be documents of all other exhibit types for which we have not requested a confidentiality classification. Best Regards, _______________________________ Signature Name: Sandor Kiss Title: Sr. Director Operations

30 N Lasalle St. Suite 2630 Chicago, IL 60602 Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21048 Date: 05/01/2023 Subject: Request for Short Term Confidentiality FCC-ID: 2AKLI-TP101 To Whom It May Concern: In accordance with §0.457(d) and §0.459 of CFR 47, JIO, INC. hereby requests short term confidentiality for documents filed under the following exhibit types: 1. External Photographs 2. Internal Photographs 3. User / Instruction Manual 4. Test Set-up Photographs until the product will be publicly announced. Short term confidentiality release date / period 180 days from grant issue date. These items contain detailed system and equipment description and related information about the product which JIO, INC. considers to be proprietary, confidential and a custom design which otherwise would not be released to the general public. Since this design is a basis from which future technological products will evolve, JIO, INC. also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. We are informed and aware of our obligation that we have to inform the involved TCB in written and in due time if we intend to market the product prior to the above specified confidentiality release date so that the short-term confidentiality classification can be reset prior to product launch. We are aware that exhibit types cover letters, attestations, label document, test reports, RF exposure information (SAR and MPE reports), cannot be requested to be classified confidential and are thus subject to publication, as will be documents of all other exhibit types for which we have not requested a confidentiality classification. Best Regards, ____________________________________ Signature 30 N Lasalle St. Suite 2630 Chicago, IL 60602 Name: Sandor Kiss Title: Sr. Director Operations

© 2023 RF Exposure Lab, LLC This report shall not be reproduced except in full without the written approval of RF Exposure Lab, LLC. 802 N. Twin Oaks Valley Road, Suite 105 • San Marcos, CA 92069 • U.S.A. TEL (760) 471-2100 • FAX (760) 471-2121 http://www.rfexposurelab.com CERTIFICATE OF COMPLIANCE SAR EVALUATION Jio, Inc. Dates of Test: June 15-16, 2023 30 N Lasalle St. Suite 2630 Test Report Number: SAR.20230604 Chicago, IL 60602 This wireless mobile and/or portable device has been shown to be compliant for localized specific absorption rate (SAR) for uncontrolled environment/general exposure limits specified in ANSI/IEEE Std. C95.1-1992 and had been tested in accordance with the measurement procedures specified in IEEE 1528- 2013 and IEC 62209-2:2010 (See test report). I attest to the accuracy of the data. All measurements were performed by myself or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. RF Exposure Lab, LLC certifies that no party to this application has been denied FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Jay M. Moulton Vice President Testing Cert. # 2387.01 FCC ID: 2AKLI-TP101 Model(s): TP101 Marketing Name: Jiobit Test Sample: Engineering Unit Same as Production Serial No.: Eng 1 Equipment Type: Digital Transmission System Transceiver Classification: Portable Transmitter Next to Body TX Frequency Range: 777 – 787 MHz; 2412 – 2462 MHz; 2402 – 2480 MHz Frequency Tolerance: ± 2.5 ppm Maximum RF Output: 750 MHz (LTE) – 22.0 dBm, 2450 MHz (b) – 17.0 dBm, 2450 MHz (g) – 13.0 dBm, 2450 MHz (n) – 13.0 dBm, 2450 MHz (BT) – 13.0 dBm Conducted Signal Modulation: QPSK, DSSS, OFDM, GFSK Antenna Type: Internal Antenna Application Type: Certification FCC Rule Parts: Part 2, 15C, 27 KDB Test Methodology: KDB 447498 D01 v06, KDB 941225 D05 v02r05, KDB 865664 D01 v01r04, KDB 865664 D02 v01r02 Industry Canada: RSS-102 Issue 5, Safety Code 6 Max. Stand Alone SAR Value: 1.36 W/kg Reported Max. Simultaneous SAR Value: 1.59 W/kg Reported Separation Distance: 0 mm Report Number: SAR.20230604 © 2023 RF Exposure Lab, LLC Page 2 of 93 This report shall not be reproduced except in full without the written approval of RF Exposure Lab, LLC. Table of Contents 1. Introduction ........................................................................................................................ 4 SAR Definition [5] ................................................................................................................... 5 2. SAR Measurement Setup ................................................................................................... 6 Robotic System ...................................................................................................................... 6 System Hardware ................................................................................................................... 6 System Electronics ................................................................................................................. 7 Probe Measurement System .................................................................................................. 7 3. Probe and Dipole Calibration .............................................................................................15 4. Phantom & Simulating Tissue Specifications .....................................................................16 Head & Body Simulating Mixture Characterization ................................................................16 5. ANSI/IEEE C95.1 – 1999 RF Exposure Limits [2] ..............................................................17 Uncontrolled Environment .....................................................................................................17 Controlled Environment .........................................................................................................17 6. Measurement Uncertainty .................................................................................................18 7. System Validation..............................................................................................................19 Tissue Verification .................................................................................................................19 Test System Verification ........................................................................................................19 8. LTE Document Checklist ...................................................................................................20 9. SAR Test Data Summary ..................................................................................................23 Procedures Used To Establish Test Signal ...........................................................................23 Device Test Condition ...........................................................................................................23 10.1 SAR Measurement Conditions for LTE Bands ...........................................................24 SAR Data Summary – 750 MHz Body – LTE Band 13 ..........................................................29 SAR Data Summary – 2450 MHz Body 802.11b & BLE ........................................................30 SAR Data Summary – Simultaneous Evaluation ...................................................................31 11. Test Equipment List .......................................................................................................32 12. Conclusion ....................................................................................................................33 13. References ....................................................................................................................34 Appendix A – System Validation Plots and Data .............…

Text truncated - open the document above for the full version.

A2LA Accredited IC recognized # 3462B CETECOM Inc. 411 Dixon Landing Road  Milpitas, CA 95035  U.S.A. Phone: + 1 (408) 586 6200  Fax: + 1 (408) 586 6299  E-mail: [email protected]  http://www.cetecom.com CETECOM Inc. is a Delaware Corporation with Corporation number: 2905571 © Copyright by CETECOM FCC / ISED Test Reports For: Jiobit Marketing Name: Jiobit Model: TP101 Product Description: Jiobit Location Monitor FCC ID: 2AKLI-TP101 Applied Rules and Standards: 47 CFR Part 15.247 (DTS) RSS-247 Issue 2 (DTSs) & RSS-Gen Issue 5 REPORT #: EMC_JIOBI_005_22001_FCC_15_247_WIFI_DTS_Rev1 DATE: 2023-06-29 Test Report #: EMC_JIOBI_005_22001_FCC_15_247_WIFI_DTS_Rev1 FCC ID: 2AKLI-TP101 Date of Report 2023-06-29 Page 2 of 61 TABLE OF CONTENTS 1 ASSESSMENT .............................................................................................................................................................. 3 2 ADMINISTRATIVE DATA ............................................................................................................................................... 4 2.1 IDENTIFICATION OF THE TESTING LABORATORY ISSUING THE EMC TEST REPORT ........................................................................... 4 2.2 IDENTIFICATION OF THE CLIENT ............................................................................................................................................. 4 2.3 IDENTIFICATION OF THE MANUFACTURER ................................................................................................................................. 4 3 EQUIPMENT UNDER TEST (EUT) ................................................................................................................................... 5 3.1 EUT SPECIFICATIONS ......................................................................................................................................................... 5 3.2 EUT SAMPLE DETAILS ......................................................................................................................................................... 6 3.3 ACCESSORY EQUIPMENT (AE) DETAILS ................................................................................................................................... 6 3.4 TEST SAMPLE CONFIGURATION ............................................................................................................................................. 6 4 SUBJECT OF INVESTIGATION ...................................................................................................................................... 7 5 MEASUREMENT RESULTS SUMMARY .......................................................................................................................... 7 6 MEASUREMENT UNCERTAINTY.................................................................................................................................... 8 6.1 ENVIRONMENTAL CONDITIONS DURING TESTING: ...................................................................................................................... 8 6.2 DATES OF TESTING: ............................................................................................................................................................ 8 6.3 DECISION RULE: ................................................................................................................................................................. 8 7 MEASUREMENT PROCEDURES .................................................................................................................................... 9 7.1 RADIATED MEASUREMENT .................................................................................................................................................... 9 7.2 POWER LINE CONDUCTED MEASUREMENT PROCEDURE .......................................................................................................... 11 7.3 RF CONDUCTED MEASUREMENT PROCEDURE ....................................................................................................................... 11 8 TEST RESULT DATA .................................................................................................................................................. 12 8.1 MAXIMUM CONDUCTED (AVERAGE) OUTPUT POWER ............................................................................................................... 12 8.2 POWER SPECTRAL DENSITY ............................................................................................................................................... 19 8.3 BAND EDGE COMPLIANCE .................................................................................................................................................. 26 8.4 EMISSION BANDWIDTH 6DB AND 99% OCCUPIED BANDWIDTH ................................................................................................... 34 8.5 RADIATED TRANSMITTER SPURIOUS EMISSIONS AND RESTRICTED BANDS ................................................................................... 46 9 TEST SETUP PHOTOS ................................................................................................................................................ 60 10 TEST EQUIPMENT AND ANCILLARIES USED FOR TESTING ......................................................................................... 60 11 HISTORY ................................................................................................................................................................... 61 Test Report #: EMC_JIOBI_005_22001_FCC_15_247_WIFI_DTS_Rev1 FCC ID: 2AKLI-TP101 Date of Report 2023-06-29 Page 3 of 61 1 Assessment The following device was evaluated against the applicable criteria specified in FCC rules Parts 15.247 of Title 47 of the Code of Federal Regulations and the relevant ISED Canada standard RSS-247. No deviations were ascertained. Company Description Model # Jiobit Jiobit Lo…

Text truncated - open the document above for the full version.

Antenna Document Equipment Description: This document contains the antenna gain information for the Wi-Fi /BLE/LTE antennas for Jiobit location monitor. The operational frequency of these technologies is WLAN & BT LE 2400-2480 MHz, and LTE Band 13 777-787MHz the maximum gain within the frequency band reported is following: i. Name and address of the antenna manufacturer JIOBIT, PCB IFA ii. Model number of the antenna 15000007003 iii. Maximum gain of the antenna for the frequency band of operation. Setup: CETECOM Inc. 411 Dixon Landing Road  Milpitas, CA 95035  U.S.A. Phone: + 1 (408) 586 6200  Fax: + 1 (408) 586 6299  E-mail: [email protected]  http://www.cetecom.com CETECOM Inc. is a Delaware Corporation with Corporation number: 2113686 Page 1 of 29 © Copyright by CETECOM Total Radiated Power and Total Isotropic Sensitivity Spherical Pattern Measurement. JIOBIT WiFi/BT Antenna REPORT Date of Report: 2023-6-30 Date of issue: 2023-6-30 Report Copy No.: 1.0 The test results of this test report relate exclusively to the test item specified in Identification of the Equipment under Investigation. The CETECOM Inc. USA does not assume responsibility for any conclusions and generalizations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of the CETECOM Inc USA. CETECOM Inc. 411 Dixon Landing Road  Milpitas, CA 95035  U.S.A. Phone: + 1 (408) 586 6200  Fax: + 1 (408) 586 6299  E-mail: [email protected]  http://www.cetecom.com CETECOM Inc. is a Delaware Corporation with Corporation number: 2113686 Page 2 of 29 © Copyright by CETECOM Manufacturer JioBit Model WiFi / BT Antenna CTIA Request # N/A Wi-Fi Alliance CID # N/A EUT ID / SN / IMEI N/A FCC ID Number N/A Hardware Version N/A Software Version N/A Configuration of Primary Mechanical Mode Unit in Freespace position Test Plan Revision N/A Test date 6/30/2023 Temperature / Humidity 72.7 0 F / 47.1% Applicant’s Name: Address: Contact Person: Phone No. Fax: e-mail: CETECOM Inc. 411 Dixon Landing Road  Milpitas, CA 95035  U.S.A. Phone: + 1 (408) 586 6200  Fax: + 1 (408) 586 6299  E-mail: [email protected]  http://www.cetecom.com CETECOM Inc. is a Delaware Corporation with Corporation number: 2113686 Page 3 of 29 © Copyright by CETECOM EUTs used for each test EUT # EUT ID CATL/CHAMBER USED Radio Modes Band(s) Test Types(s) Test Conditions 1 CETECOM/OTA5 Passive antenna 2.4 GHz Gain FS CETECOM Inc. 411 Dixon Landing Road  Milpitas, CA 95035  U.S.A. Phone: + 1 (408) 586 6200  Fax: + 1 (408) 586 6299  E-mail: [email protected]  http://www.cetecom.com CETECOM Inc. is a Delaware Corporation with Corporation number: 2113686 Page 4 of 29 © Copyright by CETECOM  Contents 1 SUMMATION TEST REPORT – Gain measurements .................................................................................................................................. 6 2 Physical Layout and Site Description .............................................................................................................................................................. 8 2.1 Wireless Test Facility ................................................................................................................................................................................... 8 2.2 Anechoic Chamber........................................................................................................................................................................................ 8 2.3 Phi Axis Positioner & Theta Axis Scanner ................................................................................................................................................... 9 2.4 Wrist-Worn Forearm Phantom .................................................................................................................................................................... 9 2.5 Quiet Zone .................................................................................................................................................................................................... 9 2.6 Howland Company Model QR-4 Quad Ridge Horn Antenna .................................................................................................................... 10 2.7 Circularly Polarized Communication Antenna ........................................................................................................................................... 10 2.8 Test Equipment ........................................................................................................................................................................................... 10 2.9 AMS32 Software ........................................................................................................................................................................................ 11 3 Test Method ................................................................................................................................................................................................... 12 3.1 Total Radiated Power .................................................................................................................................................................................. 12 3.2 Total Isotropic Sensitivity ........................................................................................................................................................................... 12 4 Measurement Uncertainty OTA 5 Chamber ........................................................…

Text truncated - open the document above for the full version.