2AKNY-IDSAPROAUTO DIAGNOSTIC SYSTEM

CanDoHDDiagnosticTablet 1 Statement ThismanualisdesignedfortheuseofCanDoHDProIIITabdiagnostic toolandcannotbecopiedorstoredinanyform(electronic,mechanical, photocopying,recordingorotherwise)withoutpriorwritten permissionbeingsecuredbyCanDoInternational,Inc. Thismanualisintendedforprofessionalvehiclerepairtechniciansand providestheoperationmethodsforusingCANDOproducts.CanDo International,Inc.acceptsnoresponsibilityfortheconsequences causedbyabusingtheoperationmethodsonotherequipment. CanDoInternational,Inc.shallnotundertakeanyresponsibilityfor accidentscausedbytheuserpersonallyorotherpeople,costsand expensesduetoequipmentdamagesandequipmentlossthatare causedbytheuser’sabuses,misuses,arbitrarychanges,repairs,or operationsoftheequipmentnotinaccordancewiththemanual requirements.Thismanualiswritteninaccordancewiththeexisting configurationandfunctionsoftheproduct,it’ssubjecttochange withoutnoticeiftheproductaddsnewconfigurationandfunctions. CanDoInternational,Inc.hasregisteredtheCANDOtrademarkin America.Thecompanydeclaresthattheownershipoftheregistered trademark,servicemark,domainname,logo,andcompanynamein countrieswhichtheyhavenotyetbeenregisteredbelongstoCanDo International,Inc..Theotherproductsandtheircompanyname trademarksmentionedinthismanualbelongtotheoriginalregistered company.Thetrademarks,servicemarks,domainnames,logos,and companynamesofCanDoInternational,Inc.orothercompanies mentionedmaynotbeusedwithoutpriorwrittenpermissionofthe owner. CanDoHDDiagnosticTablet 2 RegisteredTrademark CanDoInternational,Inc.hasregisteredthetrademarkinAmericaand severalcountriesoverseas.Thecompanydeclaresthattheownershipof theregisteredtrademark,servicemark,domainname,logo,andcompany nameincountrieswhichtheyhavenotyetbeenregisteredbelongsto CanDoInternational,Inc..Theotherproductsandtheircompanyname trademarksmentionedinthismanualbelongtotheoriginalregistered company.Thetrademarks,servicemarks,domainnames,logos,and companynamesofCanDoInternational,Inc.orothercompanies mentionedmaynotbeusedwithoutpriorwrittenpermissionoftheowner. CANDOProductManualInstructions PleasereadthismanualcarefullybeforeusingtheCANDOproduct.  Thismanualiswritteninaccordancewiththeexistingconfiguration andfunctionsofproductandit’ssubjecttochangewithoutnoticeif theproductaddsnewconfigurationandfunctions.Thenewversionof themanualcanbedownloadedfromCANDOofficialwebsite,please payattentionto"Note","Remark"and"Instruction"inthemanualto makesurethesafeandcorrectuse. CanDoInternational,Inc. Tel:1-909-CanDo-11(226-3611) Office:138E.LemonAve.,Monrovia,CA91016USA Website:www.candointl.com CanDoHDDiagnosticTablet 3 Contents Statement ............................................................................................................. 1 Contents ............................................................................................................... 3 ChapterIProductIntroduction ........................................................................ 5 1.1ProductOverview ...................................................................................... 5 1.2ProductFeatures ........................................................................................ 5 1.3ServiceandMaintenance .......................................................................... 6 1.3.1StorageEnvironment ............................................................................ 6 1.3.2HostProtection ..................................................................................... 7 1.3.3ScreenMaintenance ............................................................................. 7 1.3.4Precautions ........................................................................................... 7 1.4AutomobileInspectionNotes .................................................................. 8 1.5ProductHelp ............................................................................................... 9 ChapterIIProductStructure ........................................................................ 10 2.1HostHardwareInstruction .................................................................... 10 2.1.1HostDiagram ...................................................................................... 10 2.1.2HostParameters ................................................................................. 11 ChapterIIIOperationManual ........................................................................ 12 3.1ConnectionofPowerSupply&MainTestingCable ........................ 12 3.1.1HostPowerSupply ............................................................................ 12 3.1.2WiringMethod ................................................................................... 12 3.1.3StartupandShutdown ........................................................................ 13 3.2StartInterfaceMenu ............................................................................. 14 3.2.1MainInterface .................................................................................... 14 3.2.2VehicleDiagnosis ................................................................................ 15 CanDoHDDiagnosticTablet 4 3.2.3DataManagement .............................................................................. 15 3.2.4RemoteDiagnosis ............................................................................... 16 3.2.5Update ................................................................................................ 16 3.2.6Help ..................................................................................................... 17 3.2.7setup ................................................................................................... 17 ChapterIVUpgrade ........................................................................................ 21 ChapterVOBDPindetection ......................................................................... 22 ChapterVIComplianceInformation ....................................................…

Text truncated - open the document above for the full version.

DATE : 2020-06-02 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Jason Wu of Global United Technology Services Co., Ltd.and No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with CanDo International, Inc. and 138 E Lemon Ave, Monrovia, California 91016, United States Signature: Name: Jane Zhu Title: Manager Company: CanDo International, Inc.

Test model number: HD PRO III

Label： Size：95mm x 50mm Label location：

Test model number: HD PRO III

Page: 1 of 39 TEST REPORT Report No. ...................................... : CHTEW20060025 Report verificaiton: Project No. ...................................... : SHT2005045401EW FCC ID ............................................. : 2AKNY-IDSAPRO Applicant’s name ........................... : SHENZHEN FCAR TECHNOLOGY CO.,LTD Address ............................................. : 4th Floor, Building A, Jianggu Industrial Park, No. 1 Zhenye Road, Tangxiayong Community, Yanluo Street, Songgang, Shenzhen Test item description .................... : AUTO DIAGNOSTIC SYSTEM Trade Mark ....................................... : FCAR Model/Type reference ....................... : HD PRO III Listed Model(s) ................................. : - Standard ......................................... : FCC 47 CFR Part2.1093 IEEE Std C95.1, 1999 Edition IEEE 1528: 2013 Date of receipt of test sample..........: May 14, 2020 Date of testing..............................: May 15, 2020- Jun.02, 2020 Date of issue...............................: Jun.03, 2020 Result .................. ........................: PASS Compiled by ( position+printedname+signature) ... : File administrators: Fanghui Zhu Supervised by ( position+printedname+signature) ... : Test Engineer: Xiaodong Zhao Approved by ( position+printedname+signature) ... : Manager: Hans Hu Testing Laboratory Name ............. : Shenzhen Huatongwei International Inspection Co., Ltd Address ............................................. : 1/F, Bldg 3, Hongfa Hi-tech Industrial Park, Genyu Road, Tianliao, Gongming, Shenzhen, China Shenzhen Huatongwei International Inspection Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Huatongwei International Inspection Co., Ltd is acknowledged as copyright owner and source of the material. Shenzhen Huatongwei International Inspection Co., Ltd takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. The test report merely correspond to the test sample. Report No.: CHTEW20060025 Page: 2 of 39 Issued: 2020-06-03 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V02 (2020-06) Contents 1. Statement of Compliance 3 2. Test Standards and Report version 4 2.1. Test Standards 4 2.2. Report version 4 3. Summary 5 3.1. Client Information 5 3.2. Product Description 5 3.3. RF Specification Description 5 3.4. Testing Laboratory Information 6 3.5. Environmental conditions 6 4. Equipments Used during the Test 7 5. Measurement Uncertainty 8 6. SAR Measurements System Configuration 9 6.1. SAR Measurement Set-up 9 6.2. DASY5 E-field Probe System 10 6.3. Phantoms 11 6.4. Device Holder 11 7. SAR Test Procedure 12 7.1. Scanning Procedure 12 7.2. Data Storage and Evaluation 14 8. Dielectric Property Measurements & System Check 16 8.1. Tissue Dielectric Parameters 16 8.2. System Check 17 9. SAR Exposure Limits 22 10. Conducted Power Measurement Results 23 10.1. WiFi 23 11. Maximum Tune-up Limit 25 12. RF Exposure Conditions (Test Configurations) 27 12.1. Antenna Location 27 12.2. Standalone SAR test exclusion considerations 28 12.3. Required Test Configurations 28 13. Measured and Reported SAR Results 29 14. TestSetup Photos 32 15. External Photos and Internal Photos of the EUT 33 Report No.: CHTEW20060025 Page: 3 of 39 Issued: 2020-06-03 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V02 (2020-06) 1. Statement of Compliance Maximum Reported SAR (W/kg @1g) RF Exposure Conditions DTS NII Body(Dist.= 0mm) 0.060 0.124 This device is in compliance with Specific Absorption Rate (SAR) for general population/uncontrolled exposure limits (1.6 W/kg) specified in FCC 47 CFR part 2 (2.1093) and ANSI/IEEE C95.1-1992, and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528-2013 and FCC KDB publications. Report No.: CHTEW20060025 Page: 4 of 39 Issued: 2020-06-03 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V02 (2020-06) 2. Test Standards and Report version 2.1. Test Standards The tests were performed according to following standards: FCC 47 Part 2.1093: Radiofrequency radiation exposure evaluation: portable devices. IEEE Std C95.1, 1999 Edition: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz IEEE Std 1528™-2013: IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques. FCC published RF exposure KDB procedures: 865664 D01 SAR Measurement 100 MHz to 6 GHz v01r04: SAR Measurement Requirements for 100 MHz to 6 GHz 865664 D02 RF Exposure Reporting v01r02: RF Exposure Compliance Reporting and Documentation Considerations 447498 D01 General RF Exposure Guidance v06: Mobile and Portable Device RF Exposure Procedures and Equipment Authorization Policies 248227 D01 802 11 Wi-Fi SAR v02r02: SAR Measurement Proceduresfor802.11 a/b/g Transmitters KDB 616217 D04 SAR for laptop and tablets v01r02: SAR Evaluation Requirements for Laptop, Notebook, Netbook and Tablet Computers TCB workshop April, 2019; Page 19, Tissue Simulating Liquids (TSL) 2.2. Report version Revision No. Date of issue Description N/A 2020-06-03 Original Report No.: CHTEW20060025 Page: 5 of 39 Issued: 2020-06-03 Shenzhen Huatongwei International Inspection Co., Ltd. Report Template Version: V02 (2020-06) 3. Summary 3.1. Client Information Applicant: SHENZHEN FCAR TECHNOLOGY CO.,LTD Address: 4th Floor, Building A, Jianggu Industrial Park, No. 1 Zhenye Road, Tangxiayong Community, Yanluo Street, Songgang, Shenzhen Manufacturer: SHENZHEN FCAR TECHNOLOGY CO.,LTD Address: 4th Floor, Building A, Jianggu Industrial Park, No. 1 Zhenye Road, Tangxiayong Community, Yanluo…

Text truncated - open the document above for the full version.

Date: 6/2/2020Test Laboratory: Huatongwei International Inspection Co., Ltd.,SAR Lab WIFI 2.4G-Body Communication System: UID 0, Generic WIFI (0); Frequency: 2462 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 2462 MHz; σ = 1.88 S/m; ε r = 39.631; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient Temperature:22.3°C;Liquid Temperature:22.1°C; DASY Configuration: lProbe: EX3DV4 - SN7494; ConvF(7.91, 7.91, 7.91) @ 2462 MHz; Calibrated: 4/1/2020 lSensor-Surface: 1.4mm (Mechanical Surface Detection) lElectronics: DAE4 Sn1549; Calibrated: 4/4/2020 lPhantom: ELI V8.0 ; Type: QD OVA 004 AA ; Serial: 2078 lDASY52 52.10.2(1495); SEMCAD X 14.6.12(7450) Rear/CH 11/Area Scan (161x71x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.0860 W/kg Rear/CH 11/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 2.366 V/m; Power Drift = -0.14 dB Peak SAR (extrapolated) = 0.100 W/kg SAR(1 g) = 0.055 W/kg; SAR(10 g) = 0.032 W/kg Maximum value of SAR (measured) = 0.0817 W/kg 0 dB = 0.0817 W/kg = -10.88 dBW/kg Appendix A: SAR Test Data Plots Plot No.1 Date: 6/2/2020Test Laboratory: Huatongwei International Inspection Co., Ltd.,SAR Lab WIFI 5G U-NII-1-Body Communication System: UID 0, Generic WIFI (0); Frequency: 5200 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 5200 MHz; σ = 4.518 S/m; ε r = 34.8; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient Temperature:22.6°C;Liquid Temperature:22.4°C; DASY Configuration: l Probe: EX3DV4 - SN7494; ConvF(5.58, 5.58, 5.58) @ 5200 MHz; Calibrated: 4/1/2020 l Sensor-Surface: 1.4mm (Mechanical Surface Detection) l Electronics: DAE4 Sn1549; Calibrated: 4/4/2020 l Phantom: ELI V8.0 ; Type: QD OVA 004 AA ; Serial: 2078 l DASY52 52.10.2(1495); SEMCAD X 14.6.12(7450) Right/CH 40/Area Scan (191x81x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.134 W/kg Right/CH 40/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 4.222 V/m; Power Drift = -0.16 dB Peak SAR (extrapolated) = 0.136 W/kg SAR(1 g) = 0.081 W/kg; SAR(10 g) = 0.049 W/kg Maximum value of SAR (measured) = 0.116 W/kg 0 dB = 0.116 W/kg = -9.36 dBW/kg Appendix A: SAR Test Data Plots Plot No.2 Date: 6/2/2020Test Laboratory: Huatongwei International Inspection Co., Ltd.,SAR Lab WIFI 5G U-NII-3-Body Communication System: UID 0, Generic WIFI (0); Frequency: 5775 MHz;Duty Cycle: 1:1 Medium parameters used: f = 5775 MHz; σ = 5.12 S/m; ε r = 33.815; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient Temperature:22.3°C;Liquid Temperature:22.1°C; DASY Configuration: lProbe: EX3DV4 - SN7494; ConvF(4.76, 4.76, 4.76) @ 5775 MHz; Calibrated: 4/1/2020 lSensor-Surface: 1.4mm (Mechanical Surface Detection) lElectronics: DAE4 Sn1549; Calibrated: 4/4/2020 lPhantom: ELI V8.0 ; Type: QD OVA 004 AA ; Serial: 2078 lDASY52 52.10.2(1495); SEMCAD X 14.6.12(7450) Right/CH 155/Area Scan (191x81x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.167 W/kg Right/CH 155/Zoom Scan (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 4.575 V/m; Power Drift = -0.06 dB Peak SAR (extrapolated) = 0.164 W/kg SAR(1 g) = 0.105 W/kg; SAR(10 g) = 0.064 W/kg Maximum value of SAR (measured) = 0.145 W/kg 0 dB = 0.145 W/kg = -8.39 dBW/kg Appendix A: SAR Test Data Plots Plot No.3

Appendix B: DAE and Probe Calibration Certificate 1 of 12 1.1. DAE4 Calibration Certificate Appendix B: DAE and Probe Calibration Certificate 2 of 12 Appendix B: DAE and Probe Calibration Certificate 3 of 12 Appendix B: DAE and Probe Calibration Certificate 4 of 12 1.2. Probe Calibration Certificate Appendix B: DAE and Probe Calibration Certificate 5 of 12 Appendix B: DAE and Probe Calibration Certificate 6 of 12 Appendix B: DAE and Probe Calibration Certificate 7 of 12 Appendix B: DAE and Probe Calibration Certificate 8 of 12 Appendix B: DAE and Probe Calibration Certificate 9 of 12 Appendix B: DAE and Probe Calibration Certificate 10 of 12 Appendix B: DAE and Probe Calibration Certificate 11 of 12 Appendix B: DAE and Probe Calibration Certificate 12 of 12

Appendix C: Dipole Calibration Certificate 1 of 26 1.1. D2450V2 Dipole Calibration Certificate Appendix C: Dipole Calibration Certificate 2 of 26 Appendix C: Dipole Calibration Certificate 3 of 26 Appendix C: Dipole Calibration Certificate 4 of 26 Appendix C: Dipole Calibration Certificate 5 of 26 Appendix C: Dipole Calibration Certificate 6 of 26 Appendix C: Dipole Calibration Certificate 7 of 26 Appendix C: Dipole Calibration Certificate 8 of 26 Appendix C: Dipole Calibration Certificate 9 of 26 Extended Dipole Calibrations Referring to KDB865664 D01, if dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. Head-2450 Date of measurement Return-loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary impedance (ohm) Delta (ohm) 2018-02-05 -27.4 53.8 2.2 2019-02-03 -26.8 2.19% 52.9 0.9 1.9 0.3 2020-01-22 -27.1 1.09% 53.1 0.7 1.8 0.4 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5ohm of prior calibration. Therefore the verification result should support extended calibration. Appendix C: Dipole Calibration Certificate 10 of 26 1.2. D5GHzV2 Dipole Calibration Certificate Appendix C: Dipole Calibration Certificate 11 of 26 Appendix C: Dipole Calibration Certificate 12 of 26 Appendix C: Dipole Calibration Certificate 13 of 26 Appendix C: Dipole Calibration Certificate 14 of 26 Appendix C: Dipole Calibration Certificate 15 of 26 Appendix C: Dipole Calibration Certificate 16 of 26 Appendix C: Dipole Calibration Certificate 17 of 26 Appendix C: Dipole Calibration Certificate 18 of 26 Appendix C: Dipole Calibration Certificate 19 of 26 Appendix C: Dipole Calibration Certificate 20 of 26 Appendix C: Dipole Calibration Certificate 21 of 26 Appendix C: Dipole Calibration Certificate 22 of 26 Appendix C: Dipole Calibration Certificate 23 of 26 Appendix C: Dipole Calibration Certificate 24 of 26 Appendix C: Dipole Calibration Certificate 25 of 26 Appendix C: Dipole Calibration Certificate 26 of 26 Extended Dipole Calibrations Referring to KDB865664 D01, if dipoles are verified in return loss (<-20dB, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. Head-5200 Date of measurement Return-loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary impedance (ohm) Delta (ohm) 2018-02-21 -27.9 47.8 -3.3 2019-02-20 -28.5 -2.15% 48.3 0.5 -2.9 0.4 2020-01-22 -28.3 -1.43% 47.5 0.3 -3.1 0.2 Head-5300 Date of measurement Return-loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary impedance (ohm) Delta (ohm) 2018-02-21 -34.3 48.3 0.8 2019-02-20 -33.9 1.17% 47.7 0.6 0.1 0.7 2020-01-22 -33.7 1.75% 47.5 0.8 0.5 0.3 Head-5500 Date of measurement Return-loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary impedance (ohm) Delta (ohm) 2018-02-21 -31.2 47.8 1.6 2019-02-20 -31.9 -2.24% 48.2 0.4 2.5 0.9 2020-01-22 -30.7 1.60% 47.5 0.2 2.1 0.5 Head-5600 Date of measurement Return-loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary impedance (ohm) Delta (ohm) 2018-02-21 -28.7 53.2 2.1 2019-02-20 -28.1 2.09% 52.5 0.7 2.6 0.5 2020-01-22 -27.9 2.79% 52.3 0.9 1.9 0.2 Head-5800 Date of measurement Return-loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary impedance (ohm) Delta (ohm) 2018-02-21 -27.8 52.5 3.4 2019-02-20 -27.1 2.52% 52.1 0.4 2.9 0.5 2020-01-22 -27.2 2.16% 51.9 0.6 2.7 0.7 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5ohm of prior calibration. Therefore the verification result should support extended calibration.

Global United Technology Services Co., Ltd. Report No.: GTS202005000226F02 Authorized Signature: Robinson Lo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 47 TEST REPORT Applicant: CanDo International, Inc. Address of Applicant: 138 E Lemon Ave, Monrovia, California 91016, United States Manufacturer: SHENZHEN FCAR TECHNOLOGY CO.,LTD Address of Manufacturer: 8F, Chuangyi Bldg., No. 3025, Nanhai Ave., Nanshan, Shenzhen, China Factory: SHENZHEN FCAR TECHNOLOGY CO.,LTD Address of Factory: 4th Floor, Building A, Jianggu Industrial Park, No. 1 Zhenye Road, Tangxiayong Community, Yanluo Street, Songgang, Shenzhen, China Equipment Under Test (EUT) Product Name: AUTO DIAGNOSTIC SYSTEM Model No.: HD PRO III FCC ID: 2AKNY-IDSAPRO Applicable standards: FCC CFR Title 47 Part 15 Subpart E Section 15.407 Date of sample receipt: May 29, 2020 Date of Test: May 29, 2020-June 02, 2020 Date of report issue: June 02, 2020 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTS202005000226F02 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 47 2 Version Version No. Date Description 00 June 02, 2020 Original Prepared By: Date: June 02, 2020 Project Engineer Check By: Date: June 02, 2020 Reviewer Report No.: GTS202005000226F02 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 47 3 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 4.1 MEASUREMENT UNCERTAINTY ............................................................................................................. 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.2 TEST MODE ........................................................................................................................................ 7 5.3 TEST FACILITY .................................................................................................................................... 7 5.4 TEST LOCATION .................................................................................................................................. 7 5.5 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 7 5.6 DEVIATION FROM STANDARDS ............................................................................................................. 7 5.7 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................... 7 5.8 ADDITIONAL INSTRUCTIONS ................................................................................................................. 8 6 TEST INSTRUMENTS LIST ..................................................................................................................... 9 7 TEST RESULTS AND MEASUREMENT DATA .................................................................................... 11 7.1 ANTENNA REQUIREMENT: .................................................................................................................. 11 7.2 CONDUCTED EMISSIONS ................................................................................................................... 12 7.3 EMISSION BANDWIDTH AND 99% OCCUPIED BANDWIDTH .................................................................... 15 7.4 PEAK TRANSMIT POWER ................................................................................................................... 22 7.5 POWER SPECTRAL DENSITY .............................................................................................................. 25 7.6 BAND EDGE ...................................................................................................................................... 33 7.7 RADIATED EMISSION ......................................................................................................................... 38 7.8 FREQUENCY STABILITY ...................................................................................................................... 44 8 TEST SETUP PHOTO ............................................................................................................................ 47 9 EUT CONSTRUCTIONAL DETAILS ..................................................................................................... 47 Report No.: GTS202005000226F02 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, Chin…

Text truncated - open the document above for the full version.

Global United Technology Services Co., Ltd. Report No.: GTS202005000226F03 Authorized Signature: Robinson Lo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 56 TEST REPORT Applicant: CanDo International, Inc. Address of Applicant: 138 E Lemon Ave, Monrovia, California 91016, United States Manufacturer: SHENZHEN FCAR TECHNOLOGY CO.,LTD Address of Manufacturer: 8F, Chuangyi Bldg., No. 3025, Nanhai Ave., Nanshan, Shenzhen, China Factory: SHENZHEN FCAR TECHNOLOGY CO.,LTD Address of Factory: 4th Floor, Building A, Jianggu Industrial Park, No. 1 Zhenye Road, Tangxiayong Community, Yanluo Street, Songgang, Shenzhen, China Equipment Under Test (EUT) Product Name: AUTO DIAGNOSTIC SYSTEM Model No.: HD PRO III FCC ID: 2AKNY-IDSAPRO Applicable standards: FCC CFR Title 47 Part 15 Subpart E Section 15.407 Date of sample receipt: May 29, 2020 Date of Test: May 29, 2020-June 02, 2020 Date of report issued: June 02, 2020 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTS202005000226F03 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 56 2 Version Version No. Date Description 00 June 02, 2020 Original Prepared By: Date: June 02, 2020 Project Engineer Check By: Date: June 02, 2020 Reviewer Report No.: GTS202005000226F03 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 56 3 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 4.1 MEASUREMENT UNCERTAINTY ..........................................................................…

Text truncated - open the document above for the full version.