2AKXB-W4102000SwitchBot Outdoor Spotlight Cam 2K

www.switch-bot.com V1.0-2308 User Manual Outdoor Spotlight Cam 2K Please read this user manual carefully before using your device. Contents 1. Package Contents 2. List of Components 3. Specifications 4. Preparation 5. Precautions 6. Getting Started 7. Installation 8. Safety Information 9. LED Indicator Light 10. Features 11. Powering On/Off And Resetting Factory Settings 12. Firmware Upgrades 13. Troubleshooting 14. Disclaimer 15. Warranty 16. Contact & Support 01 02 04 05 06 07 08 15 17 19 21 22 23 25 26 27 Screw Pack × 2 Adhesive Wall Mount × 1 Alignment Sticker × 1 User Manual × 1Outdoor Spotlight Cam 2K × 1 Base × 1 Type-C Cable (1 m [3.3 ft.]) × 1 Camera Lens Infrared Light Spotlight Light Sensor Microphone PIR Motion Sensor Speaker Tapped Hole Package ContentsList of Components LED Indicator Light Reset Button Rubber Plug Type-C Charging Port Battery Charging Indicator Light ON/OFF Switch microSD Card Slot 0102 Screw Package Contents Base M3 × 20 mm (#5 × 25/32'') Screw × 4 M3 × 6 mm (#5 × 1/4'') Screw × 4 Drywall Anchor × 4 The base of your Outdoor Spotlight Cam 2K is detachable. You can also flexibly adjust the angle of your camera to monitor the area you want. Model: W4102000 Color: White Material: ABS with UV-resistant coating Size: 86 × 86 × 83 mm (3.4 × 3.4 × 3.3 in.) Weight: 320 g (11.3 oz.) Power: 5 V 2 A Operating Temperature: −20 ºC to 50 ºC (−4 ºF to 122 ºF) Video Resolution: 2K Field of View: 137° diagonal Storage: Supports FAT32 formatted microSD card up to 256GB (Not included) Night Vision: 10 m Operating Humidity: ≤ 95 % RH Network Connectivity: 802.11 b/g/n, 2.4 GHz; Bluetooth Low Energy 4.2 Battery Capacity: 10000 mAh PIR Detection Distance: 7.5 m (24.6 ft.) PIR Detection Angle: 110° Weather Resistance: IP65 Specifications 0304 You will need: • A smartphone or tablet using Bluetooth 4.2 or later. • The latest version of our app, downloadable via the Apple App Store or Google Play Store. • A SwitchBot account, you can register via our app or sign in to your account directly if you already have one. 1. Avoid placing the camera under direct sunlight. 2. Make sure high traffic areas are out of the camera's view. 3. Do not place the camera near any heat sources. PreparationPrecautions 0506 iOS 11.0+Android OS 5.0+ Open the SwitchBot app and sign in to your account. Tap "+" at the top right of the home page, find the Outdoor Spotlight Cam 2K icon and select, then follow the instructions to add your camera. 1. Add your camera to the SwitchBot app Please fully charge your camera battery before mounting it. Remove the rubber plug at the back of your camera, find the Type-C charging port and connect it to a power supply with the USB cable included. Note: • Use an adapter with 5 V 2 A output or higher. • The battery charging indicator light will be solid red when your camera is charging and turn solid green when your camera is fully charged. 2. Fully charge your camera Getting Started • To ensure your camera works normally after installation, it is recommended that you test the Wi-Fi connection of the area you'd like to install it. Place your camera in the area and then check the video quality and fluency via the app. • The perfect height and angle to install your camera are shown in the picture below: Height: 2.5 m (8.2 ft.) above the ground Angle: 15° downwards vertically • You can keep your camera plugged in by connecting it to a power supply or a Solar Panel using the USB cable. Please select an appropriate installation location based on the cable length. • When you connect your camera to a Solar Panel, make sure to place the Solar Panel in an area that can receive direct sunlight. What you need to know before installation: Installation 0708 2.5 m (8.2 ft.) 15° ①When mounting on more rugged surfaces like concrete or brick: Drill holes with the 6 mm (15/64'') sized drill bit according to the alignment sticker, hammer the drywall anchors into the wall, then screw the base using four M3 × 20 mm (#5 × 25/32'') screws firmly to the wall. b. Choose drill bit size and mount the base a. Confirm installation position What you'll need for installation: an electric drill, a screwdriver and a rubber hammer. For outdoor usage, we recommend that you install your camera using screws to prevent it from falling accidentally. Concrete or other hard surfaces can be challenging for drilling. If you are not experienced with drilling into a particular type of wall, you may want to consider consulting a professional. Stick the alignment sticker on the spot where you plan to install your camera. Method 1: Install Using Screws Prepare a proper-sized drill bit before drilling. 0910 ②When mounting on surfaces like wood or plaster: Drill holes with the 2.5 mm (7/64'') sized drill bit according to the alignment sticker, then screw the base using four M3 × 20 mm (#5 × 25/32'') screws to the wall. Make sure the base is firmly mounted. c. Attach your camera to the base Attach your camera to the base. You can adjust the camera angle to get the view you want based on the live video shown on the app. 1112 What you'll need for installation: a cleaning cloth, a screwdriver Adhesive wall mount can only stick firmly to smooth surfaces like glass, ceramic tile, smooth door surface and wallpaper. Please clean the surface first before installation. Method 2: Install Using Adhesive Wall Mount Method 3: Mount your camera on a stand You can also mount your Outdoor Spotlight Cam 2K on a camera stand (not included). Align the tapped hole at the bottom of your camera with the screw on the stand, then rotate your camera to tighten it onto the stand. Make sure your camera is firmly mounted, then adjust the stand to get the view you want based on the live view shown on the app. c. Attach your camera to the base Attach your camera to the base. You can adjust the camera angle to get the view you want based on the live view shown on the app. Press for 2 minutes a. Confirm installation position Stick the adhesive wall mount t…

Text truncated - open the document above for the full version.

- Woan Technology (Shenzhen) Co., Ltd. - The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 8/23/2023 U.S. Agent Designation [Woan Technology (Shenzhen) Co., Ltd.] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: [2AKXB-W4102000]): Name and company of U.S. agent: Stone Trading Limited Physical U.S. address of agent: 6547 N Academy Blvd #2266,Colorado Springs,CO 80918,United States FRN of U.S. agent: 0033401936 Email address of U.S. agent: [email protected] [Stone Trading Limited] acknowledges their obligation to accept service of process on behalf of [Woan Technology (Shenzhen) Co., Ltd.]. [Woan Technology (Shenzhen) Co., Ltd.] with the FRN [0026172536] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). Sincerely, Signature [Name] Yang Pan [Title] Manager [Company] Woan Technology (Shenzhen) Co., Ltd. [Name of U.S. agent] Dongmei Fang [Title of U.S. agent] Manager [Company of U.S. agent] Stone Trading Limited 48_[mo del] US_Agent_2.911(d)(7) - U, V04

Woan Technology (Shenzhen) Co., Ltd. The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 8/23/2023 To whom it may concern: We, [Woan Technology (Shenzhen) Co., Ltd.], hereby certify that the equipment for which authorization is sought (FCC ID: [2AKXB-W4102000]) is not “covered” equipment prohibited from receiving an equipment authorization pursuant to § 2.903 of the FCC rules. We also certify that, as of the date of the fili ng of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist ) as an entity producing “covered” equipment. By signing this fo rm, we confirm the above and that we are aware of the application requirements listed under § 2.911(b) and (d)(5) and (6). Sincerely, Signature [Name] Yang Pan [Title] Manager [Company] Woan Technology (Shenzhen) Co., Ltd. 62_[model] CoveredEqu_2.911(d)(5)(i) and (ii) - U, V02

EXTERNAL PHOTOGRAPH (Model No.: W4102000) ---------------- End ----------------

Label Location On EUT Label Product Name: SwitchBot Outdoor Spotlight Cam 2K Model No.: W4102000 FCC ID: 2AKXB-W4102000

INTERNAL PHOTOGRAPH (Model No.: W4102000) FPC Antenna Monopole Antenna ---------------- End ----------------

RF EXPOSURE EVALUATION According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency(RF) Radiation as specified in §1.1307(b) FCC ID: 2AKXB-W4102000 EUT Specification EUT SwitchBot Outdoor Spotlight Cam 2K Frequency band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.24GHz WLAN: 5.745GHz ~ 5.825GHz Others: 2.402GHz~2.480GHz BLE Device category Portable (<20cm separation) Mobile (>20cm separation) Others ___ Exposure classification Occupational/Controlled exposure (S = 5mW/cm2) General Population/Uncontrolled exposure (S=1mW/cm2) Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Max. output power BLE: 7.95dBm (0.0062W) 2.4G WIFI: 26.77dBm (0.4753W) Antenna gain (Max) BLE: 3.36 dBi 2.4G WIFI: 3.24 dBi Evaluation applied MPE Evaluation SAR Evaluation Limits for Maximum Permissible Exposure(MPE) Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density(mW/cm 2 ) Average Time (A) Limits for Occupational/Control Exposures 300-1500 -- -- F/300 6 1500-100000 -- -- 5 6 (B) Limits for General Population/Uncontrol Exposures 300-1500 -- -- F/1500 6 1500-100000 -- -- 1 30 Friis transmission formula: Pd=(Pout*G)\(4*pi*R2) Where Pd= Power density in mW/cm 2 Pout=output power to antenna in Mw G= gain of antenna in linear scale Pi=3.1416 R= distance between observation point and center of the radiator in cm Pd the limit of MPE, 1mW/cm2. If we know the maximum gain of the antenna and total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. Measurement Result Operating Mode Channel Frequency Measured Power Tune up tolerance Max. Tune up Power Antenna Gain Power density at 20cm Power density Limits (mW/cm 2 ) (MHz) (dBm) (dBm) (dBm) (dBi) (mW/ cm 2 ) 802.11b 2412 19.89 19.89±1 20.89 3.24 0.0515 1 2437 20.36 20.36±1 21.36 3.24 0.0574 1 2462 20.87 20.87±1 21.87 3.24 0.0645 1 802.11g 2412 26.02 26.02±1 27.02 3.24 0.2112 1 2437 26.64 26.64±1 27.64 3.24 0.2436 1 2462 27.04 27.04±1 28.04 3.24 0.2671 1 802.11n (HT20) 2412 25.77 25.77±1 26.77 3.24 0.1994 1 2437 26.51 26.51±1 27.51 3.24 0.2364 1 2462 26.77 26.77±1 27.77 3.24 0.2510 1 BLE 1M 2402 7.52 7.52±1 8.52 3.36 0.0031 1 2440 7.91 7.91±1 8.91 3.36 0.0034 1 2480 7.75 7.75±1 8.75 3.36 0.0032 1 BLE 2M 2402 7.54 7.54±1 8.54 3.36 0.0031 1 2440 7.94 7.94±1 8.94 3.36 0.0034 1 2480 7.95 7.95±1 8.95 3.36 0.0034 1 Pass

Project No.: ZKT-230817L6450E Page 1 of 54 FCC TEST REPORT FCC ID: 2AKXB-W4102000 Report Number. ................................ : ZKT-230817L6450E Date of Test ........................................ Aug. 15, 2023 to Aug. 18, 2023 Date of issue .................................... : Aug. 23, 2023 Total number of pages ...................... 54 Test Result ..................................... : PASS Testing Laboratory. ........................ : Shenzhen ZKT Technology Co., Ltd. Address .......................................... : 1 / F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Applicant's name ......................... : Woan Technology (Shenzhen) Co., Ltd. Address .......................................... : Room 1101, Qiancheng Commercial Center, No. 5 Haicheng Road, Mabu Community, Xixiang Sub-district, Bao’an District, Shenzhen, Guangdong, P.R.China, 518100 Manufacturer's name ................... : Woan Technology (Shenzhen) Co., Ltd. Address .......................................... : Room 1101, Qiancheng Commercial Center, No. 5 Haicheng Road, Mabu Community, Xixiang Sub-district, Bao’an District, Shenzhen, Guangdong, P.R.China, 518100 Test specification: Standard .......................................... : FCC CFR Title 47 Part 15 Subpart C Section 15.247 ANSI C63.10:2013 Test procedure ................................. : / Non-standard test method ............. : N/A Test Report Form No. .................... : TRF-EL-111_V0 Test Report Form(s) Originator .... : ZKT Testing Master TRF .................................... : Dated: 2020-01-06 This device described above has been tested by ZKT, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of ZKT, this document may be altered or revised by ZKT, personal only, and shall be noted in the revision of the document. Product name ................................. : SwitchBot Outdoor Spotlight Cam 2K Trademark ...................................... : SwitchBot Model/Type reference......................: W4102000 Ratings ............................................. : Input: DC 5V, 2A Battery1: DC 3.6V, 10000mAh/36Wh Battery2: DC 3.6V, 5000mAh/18Wh Project No.: ZKT-230817L6450E Page 2 of 54 Testing procedure and testing location: Testing Laboratory ................................... : Shenzhen ZKT Technology Co., Ltd. Address ...................................................... : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Jim Liu Tested by (name + signature) .................... : Tom Zou Reviewer (name + signature) ..................... : Lake Xie Approved (name + signature) .................... : Project No.: ZKT-230817L6450E Page 3 of 54 Table of Contents Page 1.VERSION 5 2. SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3. GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 9 3.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 9 3.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 9 3.5 EQUIPMENTS LIST FOR ALL TEST ITEMS 10 4. EMC EMISSION TEST 12 4.1 CONDUCTED EMISSION MEASUREMENT 12 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 12 4.1.2 TEST PROCEDURE 12 4.1.3 DEVIATION FROM TEST STANDARD 12 4.1.4 TEST SETUP 13 4.1.5 EUT OPERATING CONDITIONS 13 4.2 RADIATED EMISSION MEASUREMENT 16 4.2.1 RADIATED EMISSION LIMITS 16 4.2.2 TEST PROCEDURE 17 4.2.3 DEVIATION FROM TEST STANDARD 17 4.2.4 TEST SETUP 17 4.2.5 EUT OPERATING CONDITIONS 18 5.RADIATED BAND EMISSION MEASUREMENT 24 5.1 TEST REQUIREMENT: 24 5.2 TEST PROCEDURE 24 5.3 DEVIATION FROM TEST STANDARD 24 5.4 TEST SETUP 25 5.5 EUT OPERATING CONDITIONS 25 5.6 TEST RESULT 26 6.POWER SPECTRAL DENSITY TEST 27 6.1 APPLIED PROCEDURES / LIMIT 27 6.2 TEST PROCEDURE 27 6.3 DEVIATION FROM STANDARD 27 6.4 TEST SETUP 27 6.5 EUT OPERATION CONDITIONS 27 Project No.: ZKT-230817L6450E Page 4 of 54 Table of Contents Page 6.6 TEST RESULT 28 7. CHANNEL BANDWIDTH 32 7.1 APPLIED PROCEDURES / LIMIT 32 7.2 TEST PROCEDURE 32 7.3 DEVIATION FROM STANDARD 32 7.4 TEST SETUP 32 7.5 EUT OPERATION CONDITIONS 32 7.6 TEST RESULT 33 8.PEAK OUTPUT POWER TEST 37 8.1 APPLIED PROCEDURES / LIMIT 37 8.2 TEST PROCEDURE 37 8.3 DEVIATION FROM STANDARD 37 8.4 TEST SETUP 37 8.5 EUT OPERATION CONDITIONS 37 8.6 TEST RESULT 38 9. CONDUCTED BAND EDGE AND SPURIOUS EMISSION 42 9.1 APPLICABLE STANDARD 42 9.2 TEST PROCEDURE 42 9.3 DEVIATION FROM STANDARD 42 9.4 TEST SETUP 42 9.5 EUT OPERATION CONDITIONS 42 10.ANTENNA REQUIREMENT 53 11. TEST SETUP PHOTO 54 12. EUT CONSTRUCTIONAL DETAILS 54 Project No.: ZKT-230817L6450E Page 5 of 54 1.VERSION Report No. Version Description Approved ZKT-230619L4591E Rev.01 Initial issue of report Aug. 23, 2023 Project No.: ZKT-230817L6450E Page 6 of 54 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.247) , Subpart C Standard Section Test Item Judgment Remark FCC part 15.203/15.247 (c) Antenna requirement PASS FCC part 15.207 AC Power Line Conducted Emission PASS FCC part 15.247 (b)(3) Conducted Peak Output Power PASS FCC part 15.247 (a)(2) Channel Bandwidth& 99% OCB PASS FCC part 15.247 (e) Power Spectral Density PASS FCC part 15.247(d) Band Edge PASS FCC part 15.205/15.209 Spurious Emission PASS NOTE: (1)“N/A” denotes test is not applicable in this Test Report Project No.: ZKT-230817L6450E Page 7 of 54 2.1 TEST FACILITY Shenzhen ZKT Technology Co., Ltd. Add. : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China FCC Test Firm Registration Number: 692225 Designation Number: CN1299 IC Registered No.: 27033 2.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U，wher…

Text truncated - open the document above for the full version.

Project No.: ZKT-230817L6450E-1 Page 1 of 64 FCC TEST REPORT FCC ID: 2AKXB-W4102000 Report Number. .............................. : ZKT-230817L6450E-1 Date of Test ........................................ Aug. 15, 2023 to Aug. 18, 2023 Date of issue .................................... : Aug. 23, 2023 Total number of pages ...................... 64 Test Result ....................................... : PASS Testing Laboratory. ........................ : Shenzhen ZKT Technology Co., Ltd. Address .......................................... : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Applicant's name ......................... : Woan Technology (Shenzhen) Co., Ltd. Address .......................................... : Room 1101, Qiancheng Commercial Center, No. 5 Haicheng Road, Mabu Community, Xixiang Sub-district, Bao’an District, Shenzhen, Guangdong, P.R.China, 518100 Manufacturer's name ................... : Woan Technology (Shenzhen) Co., Ltd. Address .......................................... : Room 1101, Qiancheng Commercial Center, No. 5 Haicheng Road, Mabu Community, Xixiang Sub-district, Bao’an District, Shenzhen, Guangdong, P.R.China, 518100 Test specification: Standard .......................................... : FCC CFR Title 47 Part 15 Subpart C Section 15.247 ANSI C63.10:2013 Test procedure ............................ : / Non-standard test method ............. : N/A Test Report Form No. .................... : TRF-EL-110_V0 Test Report Form(s) Originator .... : ZKT Testing Master TRF .................................... : Dated: 2020-01-06 This device described above has been tested by ZKT, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of ZKT, this document may be altered or revised by ZKT, personal only, and shall be noted in the revision of the document. Product name ................................. : SwitchBot Outdoor Spotlight Cam 2K Trademark ...................................... : SwitchBot Model/Type reference ...................... : W4102000 Ratings ............................................. : Input: DC 5V, 2A Battery1: DC 3.6V, 10000mAh/36Wh Battery2: DC 3.6V, 5000mAh/18Wh Project No.: ZKT-230817L6450E-1 Page 2 of 64 Testing procedure and testing location: Testing Laboratory ................................... : Shenzhen ZKT Technology Co., Ltd. Address ...................................................... : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Jim.Liu Tested by (name + signature) .................... : Jackson.Fang Reviewer (name + signature) ..................... : Lake Xie Approved (name + signature) .................... : Project No.: ZKT-230817L6450E-1 Page 3 of 64 Table of Contents Page 1. VERSION 5 2. SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3. GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 9 3.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 9 3.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 9 3.5EQUIPMENTS LIST FOR ALL TEST ITEMS 10 4. EMC EMISSION TEST 12 4.1 CONDUCTED EMISSION MEASUREMENT 12 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 12 4.1.2 TEST PROCEDURE 12 4.1.3 DEVIATION FROM TEST STANDARD 12 4.1.4 TEST SETUP 13 4.1.5 EUT OPERATING CONDITIONS 13 4.2 RADIATED EMISSION MEASUREMENT 16 4.2.1 RADIATED EMISSION LIMITS 16 4.2.2 TEST PROCEDURE 17 4.2.3 DEVIATION FROM TEST STANDARD 17 4.2.4 TEST SETUP 17 4.2.5 EUT OPERATING CONDITIONS 18 4.2.6 TEST RESULTS 18 5.RADIATED BAND EMISSIONMEASUREMENT 24 5.1 TEST REQUIREMENT: 24 5.2 TEST PROCEDURE 24 5.3 DEVIATION FROM TEST STANDARD 25 5.4 TEST SETUP 25 5.5 EUT OPERATING CONDITIONS 25 5.6 TEST RESULT 25 6.POWER SPECTRAL DENSITY TEST 29 6.1 APPLIED PROCEDURES / LIMIT 29 6.2 TEST PROCEDURE 29 6.3 DEVIATION FROM STANDARD 29 6.4 TEST SETUP 29 6.5 EUT OPERATION CONDITIONS 29 Project No.: ZKT-230817L6450E-1 Page 4 of 64 6.6 TEST RESULT 30 7. CHANNEL BANDWIDTH & 99% OCCUPY BANDWIDTH 35 7.1 APPLIED PROCEDURES / LIMIT 35 7.2 TEST PROCEDURE 35 7.3 DEVIATION FROM STANDARD 35 7.4 TEST SETUP 35 7.5 EUT OPERATION CONDITIONS 35 7.6 TEST RESULT 36 8.PEAK OUTPUT POWER TEST 46 8.1 APPLIED PROCEDURES/LIMIT 46 8.2 TEST PROCEDURE 46 8.3 DEVIATION FROM STANDARD 46 8.4 TEST SETUP 46 8.5 EUT OPERATION CONDITIONS 46 8.6 TEST RESULT 47 9. CONDUCTED BAND EDGE AND SPURIOUS EMISSION 48 9.1 APPLICABLE STANDARD 48 9.2 TEST PROCEDURE 48 9.3 DEVIATION FROM STANDARD 48 9.4 TEST SETUP 48 9.5 EUT OPERATION CONDITIONS 48 9.6 TEST RESULTS 48 10. ANTENNA REQUIREMENT 63 11. TEST SETUP PHOTO 64 12. EUT CONSTRUCTIONAL DETAILS 64 Project No.: ZKT-230817L6450E-1 Page 5 of 64 1. VERSION Report No. Version Description Approved ZKT-230817L6450E-1 Rev.01 Initial issue of report Aug. 23, 2023 Project No.: ZKT-230817L6450E-1 Page 6 of 64 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.247) , Subpart C Standard Section Test Item Result Remark FCC part 15.203/15.247 (c) Antenna requirement PASS FCC part 15.207 AC Power Line Conducted Emission PASS FCC part 15.247 (b)(3) Conducted Peak Output Power PASS FCC part 15.247 (a)(2) Channel Bandwidth & 99% OCB PASS FCC part 15.247 (e) Power Spectral Density PASS FCC part 15.247(d) Band Edge PASS FCC part 15.205/15.209 Spurious Emission PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report Project No.: ZKT-230817L6450E-1 Page 7 of 64 2.1 TEST FACILITY Shenzhen ZKT Technology Co., Ltd. Add.: 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China FCC Test Firm Registration Number: 692225 Designation Number: CN1299 IC Registered No.: 27033 CAB identifier: CN01…

Text truncated - open the document above for the full version.

version01 Woan Technology (Shenzhen) Co., Ltd. Declaration concerning Antenna Specification It i s hereby declared that the product Model No.: W4102000, W4102001, W4102002, W4102003, W4102004, W4102005 FCC ID: 2AKXB-W4102000 fulfill s the requirement in FCC test relating to the antenna type. The device specified above confirms to the FCC recommendations for Internal Antenna type(s) described below: BLE: Model No. of antenna: WF217B Type of antenna: IFA antenna Gain of the antenna: 3.36 dBi Frequency range: 2400-2500 MHz 2.4G WIFI: Model No. of antenna: WF217B Type of antenna: Dipole antenna Gain of the antenna: 3.24 dBi Frequency range: 2400-2500 MHz The mounting of the antenna is fixed to the radio module and no other antenna should be used. Company name: Woan Technology (Shenzhen) Co., Ltd. Address: Room 1101, Qiancheng Commercial Center, No. 5 Haicheng Road, Mabu Community, Xixiang Sub-district, Bao’an District, City: Shenzhen, Guangdong ZIP / Postal code: Country: China Place: Place: Date: 2023-08-23 Signature:

深圳市铄点电子科技有限公司 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2022-07-19Pagenumber1-10 规格书 for WF217B五金蓝牙天线 卧安科技（深圳）有限公司 客户料号 E.A.2BT13044SD钢片天线OSCSS 本公司料号 WA-WF217B-五金蓝牙 编制：曾小凤审核：李明 日期：2022.07.19 深圳市铄点电子科技有限公司 深圳市南山区马家龙金龙工业城64栋西508 邮箱：[email protected] 电话:0755-86006322 传真:0755-86006323 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number2-8 深圳市铄点电子科技有限公司 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2022-07-19Pagenumber2-10 目录 规格书__________________________________________________________________1 深圳市铄点电子科技有限公司_______________________________________________1 目录______________________________________________________________________2 1.双方确认________________________________________________________________3 2.一般事项________________________________________________________________4 3.产品一般规格____________________________________________________________4 4.产品规格明细____________________________________________________________5 4.1产品结构参数___________________________________________________________5 4.2产品电性能测试数据____________________________________________________8 5.产品包装方式__________________________________________________________11 6.文档履历______________________________________________________________11 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number3-8 深圳市铄点电子科技有限公司 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2022-07-19Pagenumber3-10 1.双方确认 1.1客户确认签字 客户：卧安科技（深圳）有限公司 客户部门/职位确认人签字确认日期 硬件/射频 结构 项目经理 商务/采购 审核 1.2 铄点科技确认签字 部门/职位确认人签字确认日期 天线工程师 结构工程师 项目经理 QA 审核 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number4-8 深圳市铄点电子科技有限公司 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2022-07-19Pagenumber4-10 ssss 2.一般事项 2.1适用范围 本规格书只适用于卧安科技WF217B五金天线 2.2使用温度范围 本产品使用温度范围-20~+65°C 2.3保存温度范围 本产品保存于-30~+75°C 3.产品一般规格 NO.ITEMSDETAILS 1机型 WF217B 2频段2400-2500MHz 3VSWR≤2.0 4阻抗50Ω 5增益3.0±0.5dBi 6效率≥50% 7天线类型IFA 8天线实现形式五金(洋白铜) 9天线图片 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number5-8 深圳市铄点电子科技有限公司 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2022-07-19Pagenumber5-10 4.产品规格明细 4.1产品结构参数 4.11 产品物料组成： 序号材料规格(MM) 1五金（洋白铜0.3MM）17.35*12.20 4.12 外观 产品外观良好，无伤痕、汗迹、突起等严重影响外观缺陷。 4.13 结构尺寸 参考产品图纸： ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number6-8 深圳市铄点电子科技有限公司 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2022-07-19Pagenumber6-10 产品图纸： ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number7-8 深圳市铄点电子科技有限公司 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2022-07-19Pagenumber7-10 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number8-8 深圳市铄点电子科技有限公司 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2022-07-19Pagenumber8-10 4.2 产品电性能测试数据 4.21测试环境及仪器设备 测试环境： 温度：10°C——+30°C 相对湿度：≤80%（+40°C） 大气压力：750mmkg±30mmkg 测试设备： 网络分析仪 AgilentE8358A ETS微波暗室 4.22产品电性能测试数据： 4.22.1产品的S11图： Marker2400MHz2450MHz2500MHz Returnloss-29.25-16.84-13.48 VSWR1.061.321.51 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number9-8 深圳市铄点电子科技有限公司 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2022-07-19Pagenumber9-10 4.22.2增益、效率及辐射方向图 频率（MHz）Gain（dBi）Efficiency（%） 2400.03.0377.4% 2410.02.7673.2% 2420.02.7373.2% 2430.02.6472.4% 2440.02.9877.8% 2450.03.2880.3% 2460.03.3679.9% 2470.03.2577.6% 2480.03.2577.5% 2490.03.1075.3% 2500.03.0174.5% ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number10-8 深圳市铄点电子科技有限公司 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2022-07-19Pagenumber10-10 4.22.3辐射方向图： Passive-Freq2450.00MHZ ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number11-8 深圳市铄点电子科技有限公司 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2022-07-19Pagenumber11-10 5.产品包装方式 包装方式： 自封袋包装，每包200PCS。 6.文档履历 文件编号 DocumentNo. 日期 ReleaseDate 2022/07/19 编制 Author Hungjie 复核 Review WH 文件历次表 RevisedHistory DateVersionRevisedRecord 2022/07/191.00NewProject

深圳市铄点电子科技有限公司 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2022-07-19Pagenumber1-10 规格书 for WF217BFPCWIFI天线 卧安科技（深圳）有限公司 客户料号 E.A.5WF13043SDWifi天线OSC 本公司料号 WA- WF217B -FPC-WIFI 编制：曾小凤审核：李明 日期：2022.07.19 深圳市铄点电子科技有限公司 深圳市南山区马家龙金龙工业城64栋西508 邮箱：[email protected] 电话:0755-86006322 传真:0755-86006323 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number2-8 深圳市铄点电子科技有限公司 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2022-07-19Pagenumber2-10 目录 规格书__________________________________________________________________1 深圳市铄点电子科技有限公司_______________________________________________1 目录______________________________________________________________________2 1.双方确认________________________________________________________________3 2.一般事项________________________________________________________________4 3.产品一般规格____________________________________________________________4 4.产品规格明细____________________________________________________________5 4.1产品结构参数___________________________________________________________5 4.2产品电性能测试数据____________________________________________________8 5.产品包装方式__________________________________________________________11 6.文档履历______________________________________________________________11 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page numbe…

Text truncated - open the document above for the full version.