2AL27-CMSTSCRNCommand Studio Digital Console

1 APPROVALSHEET Suppliername:GuangzhouVisionenthalpyTechnologyCo.,LTD Suppliermaterialname:Externalantenna Supplierspecificationsandmodel:Externalantenna, 2.4~2.5GHz,3dBi,200mm,White,SMACoverPantonecoolgrey6C;Laser Mark2,SHKJ CVTEItemnumber:004.032.0052864 Admissionedition:A0 Drawingversionnumber(nodrawing):A0 Supplieracknowledgementcolumn laydown examineand verify ratify JackLucy SupplierAddress: telephone:portraiture: Note:Suppliercommitmentandconfirmation,SupplierstoGuangzhoubinelectronictechnologyCo.,Ltd., anditsaffiliatedcompanies(includingbutnotlimitedtoGuangzhouvisualsourceelectronicTechnology Co.,Ltd.,GuangzhouelectronicTechnologyCo.,Ltd.,GuangzhouintoinformationtechnologyCo.,Ltd., Guangzhou,medicalequipmenttechnologyCo.,Ltd.,GuangzhouyiintelligentelectronictechnologyCo., Ltd.,GuangzhoufarceearacoustictechnologyCo.,Ltd.,GuangzhouruixinelectronicTechnologyCo., Ltd.,QingdaosourcedynamicwisdomsportstechnologyCo.,Ltd.,Guangzhouradiummorningautomatic controltechnologyCo.,Ltd.,GuangzhouLiuhuanInformationTechnologyCo.,Ltd.)(knownas"CVTE")supply ofmaterials,Areabletomeetthestandardsstipulatedinthisadmission,Withoutthesupplier.The scannedcopy,photocopyandfaxedcopyofthisadmissionlettershallhavethesamelegaleffectasthe originalcopy. 2 ContentsDirectory 1.DocumentRevision........................................1 2.ProductPhotos&Drawings,Specifications...................4 3.PerformanceParameters....................................5 4.PackagingStandard:......................................11 5.ReliabilityTestReport:.................................12 6.DisabledMaterialGuarantee..............................13 7.RawMaterialTestList...................................14 3 Documentrevisionresumeform EditionDateDevelop/Modify/RepealcontentLayDownApproval A/02024-01-05NewEdition Yue Ting Feng Xianqiang 4 2.ProductPhotos ProductDrawings,Specifications 5 3.performanceParameter 3-1PerformanceParameters ElectricalParameters FrequencyRange 2.4-2.5GHz InputImpedence 50 Ω Standing-wave Ratio ≤2.5 Gain PowerCapacity / ThroughTheTest Thoroughfare PolarizationMode Linear Radiation Direction / ConnectorModel RP-SMA-J MechanicalParameters Terminal MaintenanceForce PCB+Spring AntennaMaterial Cu Coax GR178 SaltSprayTest 24H EnviromentalParameter Working Temperature -30°C~65°C 6 3-2 PerformanceTest S11&SWR 2400MHz 7 2450MHz 2500MHz 8 3-3 AntennaEfficiency frequency 频率 (MHz) gain 增益 (dBi) efficiency 效率(dB) efficiency 效率(%) 24004.94-1.2475.19 24105.19-1.0478.65 24205.24-0.7683.99 24305.24-0.5688 24405.37-0.6785.77 24505.37-0.5388.58 24605.3-0.3292.8 24705.36-0.491.18 24805.24-0.589.13 24904.97-0.8582.2 25004.95-0.883.16 9 4.PackagingStandard ProductMaterialNo.:004.032.0052864 Productspecification:Externalantenna,2.4~2.5GHz, 3dBi,200mm,White,SMACoverPantonecoolgrey6C;LaserMark2,SHKJ Ii.Packaging requirements andoperation instructions: 1.Internalpackaging: Product50PCSintothesmallPEbag 2.Packaging: Quantity/boxaccordingtotheactualpacking mattersneedattention: 1.Whethertoaddapartitionboard,pearlcotton; 2.Attachmentoflabels,suchasROHS; 10 5.Reliabilitytestreport 5-1.Reliabilityteststandards testitemtestmethodacceptance standard Judgment results 1V.S.W. R Setthenetwork analyzer parametersfor testing Accordingtothe specifications tobetested PASS 2 Plugin damage Setthenetwork analyzer parametersfor testing Accordingtothe specifications tobetested PASS 3 salt atmospher e Temperature35°C humidity95%saline concentration5%; testfor24hours After2H,there wasnoobvious badappearance: frequencyoffset of5% PASS 4 constant temperat ureand humidity Temperature80°C test12Hto-40°C Test12H:Humidity 90%:Test24hours After2H,there wasnoobvious badappearance: frequencyoffset of5% PASS 5 strain relief test Tometertest productconnector andterminal tensiongreater than;1Kgf Visual inspection/ measurement meetsSOP requirements,no shedding,poor contact PASS 11 6.DisabledMaterialGuarantee 12 7.RawMaterialTestList

Report No.: JCF250916081-003 LOP-FTR015 1.0 41 / 45 Test Report Project Information Customer: EUT: Model:CTI-CMST01-SCRNSN: Mode:2.4G SRD_2406Voltage:DC 24V Environment: 24.2°C51% Engineer:Soho Liu Remark: Start of Test:2025-11-13 18:00:47 Test Graph Suspected Data List NO. Frequency (MHz) Level (dBμV/m) Factor (dB) Limit (dBμV/m) Margin (dB) Height (cm) Angle (°) Polarity 12398.4955.176.5474.0018.83150196Vertical 22400.0555.066.5474.0018.94150156Vertical AV Final Data List NO. Freq. (MHz) Factor (dB) AV Value (dBμV/m) AV Limit (dBμV/m) AV Margin (dB) Height (cm) Angle (°) Polarity 12398.496.5447.9454.006.06149.9146.6Vertical 22400.056.5447.4154.006.59150156Vertical Note1:Margin=Limit - Level Report No.: JCF250916081-003 LOP-FTR015 1.0 42 / 45 Test Report Project Information Customer: EUT: Model:CTI-CMST01-SCRNSN: Mode:2.4G SRD_2474Voltage:DC 24V Environment: 24.2°C51% Engineer:Soho Liu Remark: Start of Test:2025-11-13 18:30:24 Test Graph Suspected Data List NO. Frequency (MHz) Level (dBμV/m) Factor (dB) Limit (dBμV/m) Margin (dB) Height (cm) Angle (°) Polarity 12483.5250.087.0474.0023.92150181Horizontal 22492.3052.397.0974.0021.6115021Horizontal AV Final Data List NO. Freq. (MHz) Factor (dB) AV Value (dBμV/m) AV Limit (dBμV/m) AV Margin (dB) Height (cm) Angle (°) Polarity 12483.527.0437.3154.0016.69150181Horizontal 22492.307.0941.1954.0012.8115021Horizontal Note1:Margin=Limit - Level Report No.: JCF250916081-003 LOP-FTR015 1.0 43 / 45 Test Report Project Information Customer: EUT: Model:CTI-CMST01-SCRNSN: Mode:2.4G SRD_2474Voltage:DC 24V Environment: 24.2°C51% Engineer:Soho Liu Remark: Start of Test:2025-11-13 18:29:02 Test Graph Suspected Data List NO. Frequency (MHz) Level (dBμV/m) Factor (dB) Limit (dBμV/m) Margin (dB) Height (cm) Angle (°) Polarity 12483.5252.307.0474.0021.70150207Vertical 22486.4054.427.0574.0019.58150155Vertical AV Final Data List NO. Freq. (MHz) Factor (dB) AV Value (dBμV/m) AV Limit (dBμV/m) AV Margin (dB) Height (cm) Angle (°) Polarity 12483.527.0440.9354.0013.07150207Vertical 22486.407.0542.2554.0011.75149.9111.1Vertical Note1:Margin=Limit - Level Report No.: JCF250916081-003 LOP-FTR015 1.0 44 / 45 APPENDIX C – AC Power Line Conducted Emission Test Data Report No.: JCF250916081-003 LOP-FTR015 1.0 45 / 45 END OF REPORT

Report No.: JCF250916081-003 LOP-FTR015 1.0 21 / 45 Band edge: 11B_Ant1_Low_2406 11B_Ant1_High_2474 Report No.: JCF250916081-003 LOP-FTR015 1.0 22 / 45 Spurious Emission: 11B_Ant1_2406_30~1000 11B_Ant1_2406_1000~26500 11B_Ant1_2442_30~1000 11B_Ant1_2442_1000~26500 Report No.: JCF250916081-003 LOP-FTR015 1.0 23 / 45 11B_Ant1_2474_30~1000 11B_Ant1_2474_1000~26500 Report No.: JCF250916081-003 LOP-FTR015 1.0 24 / 45 13. Radiated Emission 13.1. Block diagram of test setup In 3 m Anechoic Chamber, test setup diagram for 9 kHz - 30 MHz: In 3 m Anechoic Chamber, test setup diagram for 30 MHz - 1 GHz: Report No.: JCF250916081-003 LOP-FTR015 1.0 25 / 45 In 3 m Anechoic Chamber, test setup diagram for frequency above 1 GHz: Note: For harmonic emissions test an appropriate high pass filter was inserted in the input port of AMP. 13.2. Limit (1) FCC 15.205 Restricted frequency band. (2) RSS-Gen section 8.10 Restricted frequency band. MHzMHzMHzGHz 0.090-0.11016.42-16.423399.9-4104.5-5.15 1 0.495-0.50516.69475-16.69525608-6145.35-5.46 2.1735-2.190516.80425-16.80475960-12407.25-7.75 4.125-4.12825.5-25.671300-14278.025-8.5 4.1772&4.1777537.5-38.251435-1626.59.0-9.2 4.2072&4.2077573-74.61645.5-1646.59.3-9.5 6.215-6.21874.8-75.21660-171010.6-12.7 6.26775-6.26825108-121.941718.8-1722.213.25-13.4 6.31175-6.31225123-1382200-230014.47-14.5 8.291-8.294149.9-150.052310-239015.35-16.2 8.362-8.366156.52475-156.525252483.5-250017.7-21.4 8.37625-8.38675156.7-156.92690-290022.01-23.12 8.41425-8.41475162.0125-167.173260-326723.6-24.0 12.29-12.293167.72-173.23332-333931.2-31.8 12.51975-12.52025240-2853345.8-335836.43-36.5 12.57675-12.57725322-335.43600-4400( 2 ) 13.36-13.41 1 Until February 1, 1999, this restricted band shall be 0.490-0.510 MHz. 2 Above 38.6 Report No.: JCF250916081-003 LOP-FTR015 1.0 26 / 45 (3) FCC 15.209 Limit. (4) RSS-Gen section 8.9 Limit. Frequency MHz Distance Meters Field Strengths Limit V/mdB(V)/m 0.009 ~ 0.4903002400/F(kHz)67.6-20log(F) 0.490 ~ 1.7053024000/F(kHz)87.6-20log(F) 1.705 ~ 30.0303029.54 30 ~ 88310040.0 88 ~ 216315043.5 216~960320046.0 960~1000350054.0 Above 10003 74.0 dB(  V)/m (Peak) 54.0 dB(  V)/m (Average) Note: (1) At frequencies at or above 30 MHz, measurements maybe performed at a distance other than what is specified provided: measurements are not made in the near field except where it can be shown that near field measurements are appropriate due to the characteristics of the device; and it can be demonstrated that the signal levels needed to be measuredat the distance employed can be detected by the measurement equipment. Measurements shallnot be performed at a distance greater than 30 meters unless it can be further demonstrated that measurements at a distance of 30 meters or less are impractical. When performing measurements at a distance other than that specified, the results shall be extrapolated to the specified distance using an extrapolation factor of 20 dB/decade (inverse linear-distance for field strength measurements; inverse-linear-distance-squared for power density measurements). (2) At frequencies below 30 MHz, measurements may be performed at a distance closer than that specified in the regulations; however, an attempt should bemade to avoid making measurements in the near field. Pending the development of an appropriate measurement procedure for measurements performed below 30 MHz, when performing measurements at a closer distance than specified, the results shall be extrapolated to the specified distance by either making measurements at a minimum of two distances on at least one radial to determine the proper extrapolation factor or by using the square of an inverse linear distance extrapolation factor (40 dB/decade). This paragraph (f) shall not apply to Access BPL devices operating below 30 MHz. About Restricted bands of operation please refer to RSS-Gensection 8.10 and FCC§15.205(a). 13.3. Test Procedure Below 30 MHz： The setting of the spectrum Analyzer RBW300 Hz (From 9 kHz to 0.15 MHz)/ 10 kHz (From 0.15 MHz to 30 MHz) VBW1 kHz (From 9 kHz to 0.15 MHz)/ 30 kHz (From 0.15 MHz to 30 MHz) SweepAuto TraceMax hold 1. The testing follows the guidelines in ANSI C63.10-2020/Cor1-2023 2. The EUT was arranged to its worst case and then turntable (from 0 degree to 360 degrees) to find the maximum reading. A pre-amp and a high pass filter are usedfor the test in order to get better signal level. Both Horizontal, Face-on and Face-off polarizations of the antenna are set to make the measurement. 3. The EUT was placed on a turntable with 80 cm meter above ground. 4. The EUT was set 3 meters from the interference receiving antenna, which was mounted on the top of 1 meter height antenna tower. 5. The radiated emission limits are based on measurements employing a CISPR quasi-peak detector except for the frequency bands 9-90 kHz, 110-490 kHz and above 1000 MHz. Radiated emission limits in these three bands are based on measurements employing an average detector. 6. For measurement below 1 GHz, the initial step in collecting conducted emission data is a spectrum analyzer peak detector mode pre-scanning the measurement frequency range. Significant peaks are Report No.: JCF250916081-003 LOP-FTR015 1.0 27 / 45 then marked and then Quasi Peak detector mode re-measured. If the emission level of the EUT measured by the peak detector is 3 dB lower than the applicable limit, the peak emission level will be reported. Otherwise, the emission measurement will be repeated using the quasi-peak detector and reported. 7. Although these tests were performed other than open fieldsite, adequate comparison measurements were confirmed against 30m open field site. Therefore, sufficient tests were made to demonstrate that the alternative site produces results that correlate with the ones of tests made in an open field site based on KDB 414788. Below 1 GHz and above 30 MHz： The setting of the spectrum Analyzer RBW100 kHz VBW300 kHz SweepAuto TraceMax hold 1. The testing follows the guidelin…

Text truncated - open the document above for the full version.

Report No.: JCF250916081-003 LOP-FTR015 1.01 / 45 FCC AND ISED CERTIFICATION TEST REPORT Applicant: Clear Touch Interactive Inc Address: 1100 Thousand Oaks Blvd, Greenville, SC 29607, United States Manufacturer: Clear Touch Interactive Inc Address: 1100 Thousand Oaks Blvd, Greenville, SC 29607, United States Product Description: Command Studio Digital Console Brand Name: Clear Touch Tested Model: CTI-CMST01-SCRN FCC ID: 2AL27-CMSTSCRN IC: 22693-CMSTSCRN Report No.: JCF250916081-003 Received Date: Sep. 22, 2025 Tested Date: Sep. 22, 2025 - Dec. 18, 2025 Issued Date: Dec. 18, 2025 Test Standards: FCC Rules and Regulations Part 15 Subpart C, RSS-247 Issue 3 August 2023 Test Procedure: ANSI C63.10-2020/Cor1-2023, 558074 D01 15.247 Meas Guidance v05r02, 662911 D01 Multiple Transmitter Output v02r01, RSS-Gen Issue 5 A2, Feb. 2021 Test Result:Pass Prepared By: Kennys Zhang/EngineerDate:Dec. 18, 2025 Reviewed By: Roger Li/Engineer Date:Dec. 18, 2025 Approved By: Talent Zhang/EngineerDate:Dec. 18, 2025 Note: The test results in this report apply exclusively to the tested model / sample. Without written approval of Guangzhou Jingce Testing Technology Co., Ltd. the test report shall not be reproduced except in full. Report No.: JCF250916081-003 LOP-FTR015 1.0 2 / 45 Report Revise Record Report VersionRevise TimeIssued DateValid VersionNotes V1.0/Dec. 18, 2025Original Report/ Report No.: JCF250916081-003 LOP-FTR015 1.0 3 / 45 Table of Contents 1. Test Report Declare...............................................................................................................................5 2. Summary of Test Results..................................................................................................................... 6 3. Test Laboratory..................................................................................................................................... 6 4. Equipment Under Test..........................................................................................................................7 4.1. Description of EUT........................................................................................................................... 7 4.2. Channel List......................................................................................................................................7 4.3. Test Channel Configuration..............................................................................................................7 4.4. Test environment conditions............................................................................................................ 7 4.5. Description of Available Antennas................................................................................................... 8 4.6. Description of Available Antennas................................................................................................... 8 5. Description of Test Setup.....................................................................................................................8 5.1. Accessory.........................................................................................................................................8 5.2. Support Equipment...........................................................................................................................8 5.3. Test Setup........................................................................................................................................ 8 5.4. Setup Diagram for Tests.................................................................................................................. 8 6. Measurement Uncertainty.....................................................................................................................9 7. Measuring Instrument and Software Used.........................................................................................9 8. On Time and Duty Cycle.....................................................................................................................11 8.1. Block diagram of test setup............................................................................................................11 8.2. Limits.............................................................................................................................................. 11 8.3. Procedure.......................................................................................................................................11 8.4. Results............................................................................................................................................11 8.5. Original test data............................................................................................................................ 11 9. 6 dB DTS Bandwidth and 99 % Occupied Bandwidth.....................................................................13 9.1. Block diagram of test setup............................................................................................................13 9.2. Limits.............................................................................................................................................. 13 9.3. Test Procedure...............................................................................................................................13 9.4. Results............................................................................................................................................13 9.5. Original test data............................................................................................................................ 14 10. Conducted Output Power.................................................................................................................16 10.1. Block diagram of test setup.....................................................................................................…

Text truncated - open the document above for the full version.

Report No.: JCF250916081-001 LOP-FTR015 1.0 151 / 158 Test Report Project Information Customer: EUT:Command Studio Digital Console Model:CTI-CMST01-SCRNSN: Mode:11N40_2452Voltage:DC 24V Environment: 24.2°C51% Engineer:Soho Liu Remark: Start of Test:2025-10-11 17:36:10 Test Graph Suspected Data List NO. Frequency (MHz) Level (dBμV/m) Factor (dB) Limit (dBμV/m) Margin (dB) Height (cm) Angle (°) Polarity 12483.5255.616.9974.0018.39150227Horizontal 22498.0257.467.0774.0016.54150132Horizontal AV Final Data List NO. Freq. (MHz) Factor (dB) AV Value (dBμV/m) AV Limit (dBμV/m) AV Margin (dB) Height (cm) Angle (°) Polarity 12483.526.9947.5054.006.50150227Horizontal 22498.027.0749.8454.004.16150132Horizontal Note1:Margin=Limit - Level Report No.: JCF250916081-001 LOP-FTR015 1.0 152 / 158 Test Report Project Information Customer: EUT:Command Studio Digital Console Model:CTI-CMST01-SCRNSN: Mode:11N40_2452Voltage:DC 24V Environment: 24.2°C51% Engineer:Soho Liu Remark: Start of Test:2025-10-11 17:26:37 Test Graph Suspected Data List NO. Frequency (MHz) Level (dBμV/m) Factor (dB) Limit (dBμV/m) Margin (dB) Height (cm) Angle (°) Polarity 12483.5262.766.9974.0011.24150231Vertical 22485.4464.707.0074.009.30150142Vertical AV Final Data List NO. Freq. (MHz) Factor (dB) AV Value (dBμV/m) AV Limit (dBμV/m) AV Margin (dB) Height (cm) Angle (°) Polarity 12483.526.9948.0154.005.99150231Vertical 22485.447.0050.3754.003.63150190.8Vertical Note1:Margin=Limit - Level Report No.: JCF250916081-001 LOP-FTR015 1.0 153 / 158 Test Report Project Information Customer: EUT:Command Studio Digital Console Model:CTI-CMST01-SCRNSN: Mode:11AX40_2422Voltage:DC 24V Environment: 24.2°C51% Engineer:Soho Liu Remark: Start of Test:2025-10-11 18:02:17 Test Graph Suspected Data List NO. Frequency (MHz) Level (dBμV/m) Factor (dB) Limit (dBμV/m) Margin (dB) Height (cm) Angle (°) Polarity 12372.9853.316.4974.0020.69150236Horizontal 22390.0353.746.5374.0020.26150259Horizontal AV Final Data List NO. Freq. (MHz) Factor (dB) AV Value (dBμV/m) AV Limit (dBμV/m) AV Margin (dB) Height (cm) Angle (°) Polarity 12372.986.4947.6954.006.31150236Horizontal 22390.036.5348.0754.005.93150259Horizontal Note1:Margin=Limit - Level Report No.: JCF250916081-001 LOP-FTR015 1.0 154 / 158 Test Report Project Information Customer: EUT:Command Studio Digital Console Model:CTI-CMST01-SCRNSN: Mode:11AX40_2422Voltage:DC 24V Environment: 24.2°C51% Engineer:Soho Liu Remark: Start of Test:2025-10-11 17:51:37 Test Graph Suspected Data List NO. Frequency (MHz) Level (dBμV/m) Factor (dB) Limit (dBμV/m) Margin (dB) Height (cm) Angle (°) Polarity 12389.8766.416.5274.007.59150190Vertical 22390.0766.596.5374.007.41150190Vertical AV Final Data List NO. Freq. (MHz) Factor (dB) AV Value (dBμV/m) AV Limit (dBμV/m) AV Margin (dB) Height (cm) Angle (°) Polarity 12389.876.5249.0954.004.91150190Vertical 22390.076.5350.1354.003.87150230.6Vertical Note1:Margin=Limit - Level Report No.: JCF250916081-001 LOP-FTR015 1.0 155 / 158 Test Report Project Information Customer: EUT:Command Studio Digital Console Model:CTI-CMST01-SCRNSN: Mode:11AX40_2452Voltage:DC 24V Environment:24.2°C51%Engineer:Soho Liu Remark: Start of Test:2025-10-11 19:19:13 Test Graph Suspected Data List NO. Frequency (MHz) Level (dBμV/m) Factor (dB) Limit (dBμV/m) Margin (dB) Height (cm) Angle (°) Polarity 12483.5254.886.9974.0019.12150153Horizontal 22493.4056.877.0474.0017.13150208Horizontal AV Final Data List NO. Freq. (MHz) Factor (dB) AV Value (dBμV/m) AV Limit (dBμV/m) AV Margin (dB) Height (cm) Angle (°) Polarity 12483.526.9948.1954.005.81150153Horizontal 22493.407.0447.6154.006.39150208Horizontal Note1:Margin=Limit - Level Report No.: JCF250916081-001 LOP-FTR015 1.0 156 / 158 Test Report Project Information Customer: EUT:Command Studio Digital Console Model:CTI-CMST01-SCRNSN: Mode:11AX40_2452Voltage:DC 24V Environment: 24.2°C51% Engineer:Soho Liu Remark: Start of Test:2025-10-11 19:10:23 Test Graph Suspected Data List NO. Frequency (MHz) Level (dBμV/m) Factor (dB) Limit (dBμV/m) Margin (dB) Height (cm) Angle (°) Polarity 12483.5263.616.9974.0010.39150228Vertical 22485.3565.407.0074.008.60150192Vertical AV Final Data List NO. Freq. (MHz) Factor (dB) AV Value (dBμV/m) AV Limit (dBμV/m) AV Margin (dB) Height (cm) Angle (°) Polarity 12483.526.9949.3354.004.67150228Vertical 22485.357.0050.8254.003.18150195.7Vertical Note1:Margin=Limit - Level Report No.: JCF250916081-001 LOP-FTR015 1.0 157 / 158 APPENDIX C – AC Power Line Conducted Emission Test Data Report No.: JCF250916081-001 LOP-FTR015 1.0 158 / 158 END OF REPORT

Report No.: JCF250916081-001 LOP-FTR015 1.0 121 / 158 Note 1: For all radiated test, EUT in each of three orthogonalaxis emissions had been tested, but only the worst case (X axis) data recorded in the report. Note 2: The EUT does not support simultaneous transmission. Note 3: The EUT was fully exercised with external accessories during the test. In the case of multiple accessory external ports, an external accessory shall be connected to one of each type of port. 13.4. Results Pass. (See below detailed test result) All the emissions except fundamental emission from 9 kHz to 25 GHz were comply with 15.209 limits. Note1: According exploratory test, the emission levels are20 dB below the limit detected from 9 kHz to 30 MHz, so the final test was performed with frequency range from 30 MHz to 26 GHz and recorded in below. Note2: For emissions below 1 GHz, according exploratory explorer test, when change Tx mode and channel, have no distinct influence on emissions level, so for emissions below 1 GHz, the final test was only performed with EUT working in ANT1+ ANT2, 11N HT40, Tx CH3 mode. Note3: For emissions above 1 GHz. If peak results comply withAV limit, AV Result is deemed to comply with AV limit. 13.5. Original test data Below 1 GHz and above 30 MHz test data Refer to appendix A Above 1 GHz test data Refer to appendix B Report No.: JCF250916081-001 LOP-FTR015 1.0 122 / 158 14. AC Power Line Conducted Emissions 14.1. Block diagram of test setup The EUT is put on a table of non-conducting material that is 80cm high. The vertical conducting wall of shielding is located 40 cm to the rear of the EUT. The power line of the EUT is connected to the AC mains through an Artificial Mains Network (A.M.N.). A EMI Measurement Receiver (R&S Test Receiver ESR3) is used to test the emissions from both sides of AC line.According to the requirements in Section 6.2 of ANSI C63.10-2020/Cor1-2023.Conducted emissions from the EUT measured in the frequency range between 0.15 MHz and 30 MHz using CISPR Quasi-Peak and average detector mode. The bandwidth of EMI test receiver is set at 9 kHz. The arrangement of the equipment is installed to meet the standards and operating in a manner, which tends to maximize its emission characteristics in a normal application. 14.2. Limits Please refer to CFR 47 FCC§15.207 (a) and ISED RSS-Gen Clause 8.8. Frequency (MHz)Quasi-peakAverage 0.15 -0.5 66 - 56 *56 - 46 * 0.50 -5.0 56.0046.00 5.0 -30.0 60.0050.00 Note 1: * Decreasing linearly with logarithm of frequency. Note 2: The lower limit shall apply at the transition frequencies. 14.3. Test procedure The EUT and Support equipment, if needed, were put placed on anon-metallic table, 80cm above the ground plane. Configuration EUT to simulate typical usage as described inclause 2.4 and test equipment as described in clause 10.2 of this report. All I/O cables were positioned to simulate typical actual usage as per ANSI C63.10. All support equipment power received from a second LISN. Emissions were measured on each current carrying line of theEUT using an EMI Test Receiver connected to the LISN powering the EUT. The Receiver scanned from 150 kHz to 30 MHz for emissions in each of the test modes. During the above scans, the emissions were maximized by cable manipulation. The test mode(s) described in clause 2.4 were scanned duringthe preliminary test. After the preliminary scan, we found the test mode producingthe highest emission level. EUT 80cm 80cm≥80cm 40cm LISN ReceiverPC System Report No.: JCF250916081-001 LOP-FTR015 1.0 123 / 158 The EUT configuration and worse cable configuration of the above highest emission levels were recorded for reference of the final test. EUT and support equipment were set up on the test bench as per the configuration with highest emission level in the preliminary test. A scan was taken on both power lines, Neutral and Line, recording at least the six highest emissions. Emission frequency and amplitude were recorded into a computer in which correction factors were used to calculate the emission level and compare reading to the applicable limit. The test data of the worst-case condition(s) was recorded. The bandwidth of test receiver is set at 9 kHz. 14.4. Test result Pass. (See below detailed test result) Note1: All emissions not reported below are too low against the prescribed limits. Note2: Pre-test AC conducted emission at both voltage AC 120V/60Hz and AC 240V/50Hz, recorded worse case. Note3: Measurement=Reading Level + Correct Factor Over=Measurement - Limit 14.5. Original test data AC Power Line Conducted Emission Test Data Refer to appendixC Report No.: JCF250916081-001 LOP-FTR015 1.0 124 / 158 15. Antenna Requirements 15.1. Applicable Requirements Please refer to FCC §15.203 An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. The manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jackor electrical connector is prohibited. Please refer to FCC §15.247(b)(4) The conducted output power limit specified in paragraph (b)of this section is based on the use of antennas with directional gains that do not exceed 6 dBi. Except as shown in paragraph (c) of this section, if transmitting antennas of directional gain greater than 6 dBi are used, the conducted output power from the intentional radiator shall be reduced below the stated values in paragraphs (b)(1), (b)(2), and (b)(3) of this section, as appropriate, by the amount in dB that the directional gain of the antenna exceeds 6 dBi. Please refer to RSS-GEN Clause 6.8 An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used wi…

Text truncated - open the document above for the full version.

Report No.: JCF250916081-001 LOP-FTR015 1.0 91 / 158 11AX20MIMO_Ant2_High_2462 11AX40MIMO_Ant1_Low_2422 11AX40MIMO_Ant2_Low_2422 Report No.: JCF250916081-001 LOP-FTR015 1.0 92 / 158 11AX40MIMO_Ant1_High_2452 11AX40MIMO_Ant2_High_2452 Report No.: JCF250916081-001 LOP-FTR015 1.0 93 / 158 Spurious Emission: 11B_Ant1_2412_30~1000 11B_Ant1_2412_1000~26500 11B_Ant2_2412_30~1000 11B_Ant2_2412_1000~26500 Report No.: JCF250916081-001 LOP-FTR015 1.0 94 / 158 11B_Ant1_2437_30~1000 11B_Ant1_2437_1000~26500 11B_Ant2_2437_30~1000 Report No.: JCF250916081-001 LOP-FTR015 1.0 95 / 158 11B_Ant2_2437_1000~26500 11B_Ant1_2462_30~1000 11B_Ant1_2462_1000~26500 Report No.: JCF250916081-001 LOP-FTR015 1.0 96 / 158 11B_Ant2_2462_30~1000 11B_Ant2_2462_1000~26500 11G_Ant1_2412_30~1000 Report No.: JCF250916081-001 LOP-FTR015 1.0 97 / 158 11G_Ant1_2412_1000~26500 11G_Ant2_2412_30~1000 11G_Ant2_2412_1000~26500 Report No.: JCF250916081-001 LOP-FTR015 1.0 98 / 158 11G_Ant1_2437_30~1000 11G_Ant1_2437_1000~26500 11G_Ant2_2437_30~1000 Report No.: JCF250916081-001 LOP-FTR015 1.0 99 / 158 11G_Ant2_2437_1000~26500 11G_Ant1_2462_30~1000 11G_Ant1_2462_1000~26500 Report No.: JCF250916081-001 LOP-FTR015 1.0 100 / 158 11G_Ant2_2462_30~1000 11G_Ant…

Text truncated - open the document above for the full version.