2AL9C-ABQ510WIFI IP CCTV CAMERA

FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co- located or operating in conjunction with any other antenna or transmitter.

Shenzhen Anboqi Technology Co.,Ltd Agent Authorization Letter 2020-03-09 MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen Huaxia Testing Technology Co., Ltd. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Name: Miss pen Position: Manager Company Name: Shenzhen Anboqi Technology Co.,Ltd Address: 3F, Building B, No.1, Road 1, Shangxue Technology Park, Bantian Town, Longgang District, Shenzhen, Guangdong province,518129, China. Tel / Fax +86 0755-89392616/+86 0755-89392616 E-Mail: [email protected]

Shenzhen Anboqi Technology Co.,Ltd Long Term Confidentiality Request Letter 2020-03-09 MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (FCC ID: 2AL9C-ABQ510) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - e.g. Block diagram - e.g. SCH - e.g. Operational Description required to be submitted with this application be permanently withheld from public review. The above documents are company proprietary information that could never get into the possession of your competition. Please contact me if there is any information you may need. Sincerely, Name: Miss pen Position: Manager Company Name: Shenzhen Anboqi Technology Co.,Ltd Address: 3F, Building B, No.1, Road 1, Shangxue Technology Park, Bantian Town, Longgang District, Shenzhen, Guangdong province,518129, China. Tel / Fax +86 0755-89392616/+86 0755-89392616 E-Mail: [email protected]

Model difference letter 2020,03,09 Dear MET Reviewer, This is a new Application from Shenzhen Anboqi Technology Co.,Ltd ABQ-510, ABQ-510B, ABQ-530A, ABQ-5200, ABQ-XXXX, ABQ-XXXXY(X stand 0-9 ,Y stand for A-Z) are identical in interior structure, electrical circuits, components and appearance. Only different in color of appearance and model name Thank you for your cooperation! Yours sincerely, Signatory: Name: Miss pen Position: Manager Company Name: Shenzhen Anboqi Technology Co.,Ltd Address: 3F, Building B, No.1, Road 1, Shangxue Technology Park, Bantian Town, Longgang District, Shenzhen, Guangdong province,518129, China. Tel / Fax +86 0755-89392616/+86 0755-89392616 E-Mail: [email protected]

FCC ID: 2AL9C-ABQ510 Test Model No.:ABQ-510 FCC ID: 2AL9C-ABQ510 FCC ID: 2AL9C-ABQ510 FCC ID: 2AL9C-ABQ510 FCC ID: 2AL9C-ABQ510

FCC ID: 2AL9C-ABQ510

Label Sample for FCC ID: 2AL9C-ABQ510 FCC ID: 2AL9C-ABQ510 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

FCC ID: 2AL9C-ABQ510 FCC ID: 2AL9C-ABQ510 FCC ID: 2AL9C-ABQ510 FCC ID: 2AL9C-ABQ510

Shenzhen Huaxia Testing Technology Co., Ltd 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China Telephone: +86-755-26648640 Fax: +86-755-26648637 Website: www.cqa-cert.com Report Template Version: V03 Report Template Revision Date: Mar.1st, 2017 RF Exposure Evaluation Report The test report is effective only with both signature and specialized stamp, The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CQA, this report can’t be reproduced except in full. Report No. : CQASZ20200200095E-02 Applicant: Shenzhen Anboqi Technology Co.,Ltd Address of Applicant: 3F, Building B, No.1, Road 1, Shangxue Technology Park, Bantian Town, Longgang District, Shenzhen, Guangdong province,518129, China. Equipment Under Test (EUT): Product: WIFI IP CCTV CAMERA Model No.: ABQ-510, ABQ-510B, ABQ-530A, ABQ-5200, ABQ-XXXX, ABQ-XXXXY(X stand 0-9 ,Y stand for A-Z) Test Model No.: ABQ-510 Brand Name: Anboqi FCC ID: 2AL9C-ABQ510 Standards: 47 CFR Part 1.1307 47 CFR Part 2.1093 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt: 2020-02-28 Date of Test: 2020-02-28 to 2020-03-05 Date of Issue: 2020-03-05 Test Result : PASS* *In the configuration tested, the EUT complied with the standards specified above Tested By： (Tom chen) Reviewed By: (Aaron Ma) Approved By: (Jack Ai) Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200200095E-02 Page:2 of 8 1 Version Revision History Of Report Report No. Version Description Issue Date CQASZ20200200095E-02 Rev.01 Initial report 2020-03-05 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200200095E-02 Page:3 of 8 2 Contents Page 1 VERSION .....................................................................................................................................................................2 2 CONTENTS .................................................................................................................................................................3 3 GENERAL INFORMATION .......................................................................................................................................4 3.1 CLIENT INFORMATION ................................................................................................................................................4 3.2 GENERAL DESCRIPTION OF EUT ................................................................................................................................4 4 SAR EVALUATION ....................................................................................................................................................6 4.1 RF EXPOSURE COMPLIANCE REQUIREMENT ..............................................................................................................6 4.1.1 Limits ..............................................................................................................................................................6 4.1.2 Test Procedure ..............................................................................................................................................6 4.1.3 EUT RF Exposure .........................................................................................................................................7 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200200095E-02 Page:4 of 8 3 General Information 3.1 Client Information Applicant: Shenzhen Anboqi Technology Co.,Ltd Address of Applicant: 3F, Building B, No.1, Road 1, Shangxue Technology Park, Bantian Town, Longgang District, Shenzhen, Guangdong province,518129, China. Manufacturer: Shenzhen Anboqi Technology Co.,Ltd Address of Manufacturer: 3F, Building B, No.1, Road 1, Shangxue Technology Park, Bantian Town, Longgang District, Shenzhen, Guangdong province,518129, China. 3.2 General Description of EUT Product Name: WIFI IP CCTV CAMERA Model No.: ABQ-510, ABQ-510B, ABQ-530A, ABQ-5200, ABQ-XXXX, ABQ-XXXXY(X stand 0-9 ,Y stand for A-Z) Test Model No.: ABQ-510 Trade Mark: Anboqi Hardware version： IPC-RM-BLK520FX0-2145H-S V1.02 Software version： General_IPC_XM510_RA50X10-C- S_WIFIXM712.712.Nat.dss_V5.00.R02.20190430 Operation Frequency: IEEE 802.11b/g/n(HT20): 2412MHz to 2462MHz IEEE 802.11n(HT40): 2422MHz to 2452MHz Channel Numbers: IEEE 802.11b/g, IEEE 802.11n HT20: 11 Channels IEEE 802.11n HT40: 7 Channels Channel Separation: 5MHz Type of Modulation: IEEE for 802.11b: DSSS(CCK,DQPSK,DBPSK) IEEE for 802.11g : OFDM(64QAM, 16QAM, QPSK, BPSK) IEEE for 802.11n(HT20 and HT40) : OFDM (64QAM, 16QAM, QPSK,BPSK) Transfer Rate: IEEE for 802.11b: 1Mbps/2Mbps/5.5Mbps/11Mbps IEEE for 802.11g : 6Mbps/9Mbps/12Mbps/18Mbps/24Mbps/36Mbps/48Mbps/54Mbps IEEE for 802.11n(HT20) : 6.5Mbps/13Mbps/19.5Mbps/26Mbps/39Mbps/52Mbps/58.5Mbps/65Mbps IEEE for 802.11n(HT40) : 13.5Mbps/27Mbps/40.5Mbps/54Mbps/81Mbps/108Mbps/121.5Mbps/135Mbps Product Type: Mobile Portable Fix Location Test Software of EUT: RF test (manufacturer declare ) Antenna Type: PCB antenna Antenna Gain: 0dBi Power Supply: AC/DC Adapter Model: BY-C1-5015 Input: 100-240~50-60Hz 0.3A Output: 5V 1.5A Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200200095E-02 Page:5 of 8 Note: Model No.: ABQ-510, ABQ-510B, ABQ-530A, ABQ-5200, ABQ-XXXX, ABQ-XXXXY(X stand 0-9 ,Y stand for A- Z) Only the model ABQ-510 was tested, since the electrical circuit design, layout, components used and internal wiring were identical for the above models, with difference being color of appearance and model name. Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200200095E-02 Page:6 of 8 4 SAR Evaluation 4.1 RF Exposure Compliance Requirement 4.1.1 Limits According to FCC Part1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in part1.1307(b) F= Frequency in MHz Friis Formula Friis tran…

Text truncated - open the document above for the full version.

Shenzhen Huaxia Testing Technology Co., Ltd 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China Telephone: +86-755-26648640 Fax: +86-755-26648637 Website: www.cqa-cert.com Report Template Version: V04 Report Template Revision Date: 2018-07-06 TEST REPORT The test report is effective only with both signature and specialized stamp, The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CQA, this report can’t be reproduced except in full. Report No. : CQASZ20200200095E-01 Applicant: Shenzhen Anboqi Technology Co.,Ltd Address of Applicant: 3F, Building B, No.1, Road 1, Shangxue Technology Park, Bantian Town, Longgang District, Shenzhen, Guangdong province,518129, China. Equipment Under Test (EUT): EUT Name: WIFI IP CCTV CAMERA Model No.: ABQ-510, ABQ-510B, ABQ-530A, ABQ-5200, ABQ-XXXX, ABQ-XXXXY(X stand 0-9 ,Y stand for A-Z) Test Model No.: ABQ-510 Brand Name: Anboqi FCC ID: 2AL9C-ABQ510 Standards: 47 CFR Part 15, Subpart C Date of Receipt: 2020-02-28 Date of Test: 2020-02-28 to 2020-03-05 Date of Issue: 2020-03-05 Test Result : PASS* *In the configuration tested, the EUT complied with the standards specified above Tested By： (Tom Chen) Reviewed By: (Aaron Ma) Approved By: ( Jack Ai) . Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200200095E-01 Page:2 of 91 1 Version Revision History Of Report Report No. Version Description Issue Date CQASZ20200200095E-01 Rev.01 Initial report 2020-03-05 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200200095E-01 Page:3 of 91 2 Test Summary Test Item Test Requirement Test method Result Antenna Requirement 47 CFR Part 15, Subpart C Section 15.203/15.247 (c) ANSI C63.10 2013 PASS AC Power Line Conducted Emission 47 CFR Part 15, Subpart C Section 15.207 ANSI C63.10 2013 PASS Conducted Peak & Average Output Power 47 CFR Part 15, Subpart C Section 15.247 (b)(3) ANSI C63.10 2013 PASS 6dB Occupied Bandwidth 47 CFR Part 15, Subpart C Section 15.247 (a)(2) ANSI C63.10 2013 PASS Power Spectral Density 47 CFR Part 15, Subpart C Section 15.247 (e) ANSI C63.10 2013 PASS Band-edge for RF Conducted Emissions 47 CFR Part 15, Subpart C Section 15.247(d) ANSI C63.10 2013 PASS RF Conducted Spurious Emissions 47 CFR Part 15, Subpart C Section 15.247(d) ANSI C63.10 2013 PASS Radiated Spurious Emissions 47 CFR Part 15, Subpart C Section 15.205/15.209 ANSI C63.10 2013 PASS Restricted bands around fundamental frequency (Radiated Emission) 47 CFR Part 15, Subpart C Section 15.205/15.209 ANSI C63.10 2013 PASS Model No.: ABQ-510, ABQ-510B, ABQ-530A, ABQ-5200, ABQ-XXXX, ABQ-XXXXY(X stand 0-9 ,Y stand for A-Z) Only the model ABQ-510 was tested, since the electrical circuit design, layout, components used and internal wiring were identical for the above models, with difference being color of appearance and model name. Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200200095E-01 Page:4 of 91 3 Contents Page 1 VERSION .............................................................................................................................................................. 2 2 TEST SUMMARY ................................................................................................................................................ 3 3 CONTENTS .......................................................................................................................................................... 4 4 GENERAL INFORMATION ................................................................................................................................ 5 4.1 CLIENT INFORMATION ................................................................................................................................... 5 4.2 GENERAL DESCRIPTION OF EUT ................................................................................................................. 5 4.3 TEST ENVIRONMENT AND MODE .................................................................................................................. 7 4.4 DESCRIPTION OF SUPPORT UNITS ............................................................................................................. 11 4.5 TEST LOCATION .......................................................................................................................................... 11 4.6 TEST FACILITY ............................................................................................................................................ 11 4.7 STATEMENT OF THE MEASUREMENT UNCERTAINTY ................................................................................... 12 4.8 DEVIATION FROM STANDARDS ................................................................................................................... 12 4.9 ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................... 12 4.10 OTHER INFORMATION REQUESTED BY THE CUSTOMER ............................................................................ 12 4.11 EQUIPMENT LIST ......................................................................................................................................... 13 5 TEST RESULTS AND MEASUREMENT DATA ........................................................................................... 14 5.1 ANTENNA REQUIREMENT ............................................................................................................................ 14 5.2 CONDUCTED EMISSIONS ............................................................................................................................ 15 5.3 CONDUCTED PEAK & AVERAGE OUTPUT POWER ..................................................................................... 19 5.4 6DB OCCUPY BANDWIDTH ......................................................................................................................... 2…

Text truncated - open the document above for the full version.

FCC ID: 2AL9C-ABQ510 1 Photographs - EUT Test Setup 1.1 Radiated Emission 9KHz~30MHz: 30MHz~1GHz: FCC ID: 2AL9C-ABQ510 Above 1GHz: 1.2 Conducted Emission