2ALGNJH-DOOR511remote control

FCC Statement: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

U.S. AGENT LETTER OF ATTESTATION Date: 2024-03-26 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID:2ALGNJH-DOOR511 Quanzhou Juhui Electronics Co.,Ltd. (“the Applicant”) certifies that, as of the date of the filing of the application, Iconsigh Inc. is our designated U.S. agent for service of process for the above referenced FCC ID. Quanzhou Juhui Electronics Co.,Ltd. (“the Applicant”) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Iconsigh Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: Iconsigh Inc. Address: 2310 Homestead Road, Suite C1, Los Altos, CA, 94024, USA FRN: 0033398652 Tel.: +1 (408) 320-9867 Email: [email protected] Signed by (printed name): Benjamin Kaur Signature: Applicant: Quanzhou Juhui Electronics Co.,Ltd. Address: No.288 Changxing Road,Huoju Industrial District,Licheng Area,Quanzhou,Fujian, China FRN: 0026341743 Tel: (+86)0595-22622065 Email: [email protected] Signed by (printed name): Sky Lai Signature:

Quanzh Add:No Ch TEL: (+ FAX: 0 E‐mail: Date: 20 FEDE R Authori 7435 O Colum b Ref: A t FCC I D Quanz h authoriz authoriz Quanz h the appl “covere Sincer e Signat u Printed Title: G hou Juhui El o.288 Chang hina +86)0595-2 0595-226220 463085364 024-03-25 RAL COMM ization and akland Mil l bia, MD 210 ttestation St D:2ALGNJ hou Juhui El zation is sou zation pursu hou Juhui El lication, the ed” equipme ely, ure Name: Sky General man lectronics C gxing Road 2622065 065 [email protected] MUNICATI Evaluation ls Road 046 tatements C JH-DOOR5 lectronics C ught is not “ uant to secti lectronics C e applicant i ent. y Lai nage Co.,Ltd. d,Huoju Indu M Att IONS COM Division FR 47 §2.9 511 Co.,Ltd. (“th “covered” e ion 2.903 of Co.,Ltd. (“th is not identi ustrial Distr testation L MMISSIONS 11(d)(5)(i)( he applican equipment p f the FCC ru he applican ified on the rict,Licheng CFR Letter S (ii) Filing nt”) certifies prohibited fr ules. nt”) certifies Covered Li g Area,Quan R 47 §2.911(d s that the eq from receivi s that as of t ist as an ent nzhou,Fujia d)(5)(i)(ii) Atte quipment for ng an equip the date of t tity produci an, estation Letter r which pment the filing of ing r f

QA-FR-170-B Quanzhou Juhui Electronics Co.,Ltd. Add:No.288 Changxing Road,Huoju Industrial District,Licheng Area,Quanzhou,Fujian, China TEL: (+86)0595-22622065 FAX: 0595-22622065 E-mail: [email protected] FCC Authorization Date: 2024-03-25 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We , Quanzhou Juhui Electronics Co.,Ltd., Hereby authorizes China Certification ICT Co.,Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co.,Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Client’s signature Printed Name: Sky Lai Title: General manage

QA-FR-171-A Quanzhou Juhui Electronics Co.,Ltd. Add:No.288 Changxing Road,Huoju Industrial District,Licheng Area,Quanzhou,Fujian, China TEL: (+86)0595-22622065 FAX: 0595-22622065 E-mail: [email protected] FCC Confidential Authorization Date: 2024-03-25 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID:2ALGNJH-DOOR511 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Quanzhou Juhui Electronics Co.,Ltd. hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Client’s signature Printed Name: Sky Lai Title: General manage

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955840-EXP Page 1 of 3 EUT EXTERNAL PHOTOGRAPHS China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955840-EXP Page 2 of 3 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955840-EXP Page 3 of 3

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955840-INP Page 1 of 5 EUT INTERNAL PHOTOGRAPHS China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955840-INP Page 2 of 5 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955840-INP Page 3 of 5 Chip China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955840-INP Page 4 of 5 Antenna China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955840-INP Page 5 of 5

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955840-00 Page 47 of 49 5. RF EXPOSURE EVALUATION 5.1 Applicable Standard §1.1307(b)(3)(i) For single RF sources (i.e., any single fixed RF source, mobile device, or portable device, as defined in paragraph (b)(2) of this section): A single RF source is exempt if: (A) The available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption may not be used in conjunction with other exemption criteria other than those in paragraph (b)(3)(ii)(A) of this section. Medical implant devices may only use this exemption and that in paragraph (b)(3)(ii)(A); 5.2 Measurement Result Frequency (MHz) Maximum EIRP (dBm) Antenna Gain (dBi) Maximum Conducted Output Power 1-mW Test Exemption dBm mW 315 -13.23 1.3 -12.38 0.06 Compliant Note: 1. Chose the maximum power to do RF Exposure Evaluation. 2. This device maximum E-Field level is 84.12 dBμV/m at 3m, so the EIRP power is -11.08 dBm. 3. Pout EIRP (dBm)=Field Strength of Fundamental(dBuV/m)-95.2 4. Conducted Output Power = EIRP - Antenna Gain Result: Compliant. RF Exposure is exemption.

TEST REPORT Applicant: Quanzhou Juhui Electronics Co.,Ltd. Address: No.288 Changxing Road,Huoju Industrial District,Licheng Area,Quanzhou,Fujian,China FCC ID: 2ALGNJH-DOOR511 Product Name: remote control Standard(s): 47 CFR Part 15, Subpart C (15.231) ANSI C63.10-2013 The above device has been tested and found compliance with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR230955840-00 Date Of Issue: 2024/3/26 Reviewed By: Calvin Chen Title:RF Engineer Approved By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955840-00 Page 2 of 49 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955840-00 Page 3 of 49 CONTENTS DOCUMENT REVISION HISTORY .......................................................................................... 5 1. GENERAL INFORMATION .................................................................................................... 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 6 1.2 DESCRIPTION OF TEST CONFIGURATION ........................................................................................... 7 1.2.1 EUT Operation Condition .............................................................................................................................. 7 1.2.2 Support Equipment List and Details .............................................................................................................. 7 1.2.3 Support Cable List and Details ...................................................................................................................... 7 1.2.4 Block Diagram of Test Setup ......................................................................................................................... 7 1.3 MEASUREMENT UNCERTAINTY .......................................................................................................... 8 2. SUMMARY OF TEST RESULTS ............................................................................................ 9 3. REQUIREMENTS AND TEST PROCEDURES .................................................................. 10 3.1 AC LINE CONDUCTED EMISSIONS .................................................................................................... 10 3.1.1 Applicable Standard ..................................................................................................................................... 10 3.1.2 EUT Setup.................................................................................................................................................... 11 3.1.3 EMI Test Receiver Setup ............................................................................................................................. 11 3.1.4 Test Procedure ............................................................................................................................................. 12 3.1.5 Corrected Amplitude & Margin Calculation ................................................................................................ 12 3.2 RADIATION SPURIOUS EMISSIONS .................................................................................................... 13 3.2.1 Applicable Standard ..................................................................................................................................... 13 3.2.2 EUT Setup.................................................................................................................................................... 14 3.2.3 EMI Test Receiver & Spectrum Analyzer Setup ......................................................................................... 15 3.2.4 Test Procedure ............................................................................................................................................. 15 3.2.5 Corrected Amplitude & Margin Calculation ................................................................................................ 16 3.3 20 DB EMISSION BANDWIDTH: .......................................................................................................... 17 3.3.1 Applicable Standard ..................................................................................................................................... 17 3.3.2 EUT Setup.................................................................................................................................................... 17 3.3.3 Test Procedure ......................................................................................................................…

Text truncated - open the document above for the full version.

I.Antenna information: Antenna plate antenna of Board Make name/model name JH-TX511HCDS-CMT Antenna gain 1.3 dBi Frequency range 300~400MHz Antenna type PCB Location of mearement (company name) 12 SPEED PRODUCTS INC 2.External view drawing Picture of antenna Note:All measurements were radiated and therefore additional antenna gain documentation is not required.

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955840-00-TSP TEST SETUP PHOTOGRAPHS 9kHz~30MHz_Radiated Emission View Parallel 9kHz~30MHz_Radiated Emission View Perpendicular China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955840-00-TSP 9kHz~30MHz_Radiated Emission View Ground-parallel 30MHz~1GHz_Radiated Emission View China Certification ICT Co., Ltd (Dongguan) Report No.: CR230955840-00-TSP Radiated Emission Above 1GHz View