2ALLSOM-20018Speaker Tower

user manual Tower Speaker Speaker Tower Read these safety instructions before using your device and store them for possible future reference. Thank you for purchasing Speaker Tower4: Multimedia tower with Bluetooth, AUX in, USB play 1. If the cord is damaged, have it repaired by the manufacturer, a technical service center or a similarly qualified person in order to avoid any hazard. 2. The power supply must be replaced by a new one in case of malfunction, because this power supply is not repairable. 3. The socket-outlet should be installed near the equipment and should be easily accessible. 4. The product is not intended for use by persons (including children) with reduced physical, sensory or mental capacity. Persons who have not read the manual, unless they have received explanations by a person responsible for their safety and supervision should not use this unit. 13. The battery should not be exposed to excessive heat such as sunshine, fire or similar. 14. Different types of batteries, new and used batteries should not be mixed. 15. The battery must be installed according to the polarity. 16. If the battery is worn, it must be removed from the product. 17. The battery must be disposed off safely. Always use the collection bins provided (check with your dealer) to protect the environment. This is your assurance of quality, performance and value. Our engineers have included many useful and convenient features in this product. Please be sure to read this instruction Manual completely to make sure you are getting the maximum benefit from each feature. This product was manufactured using the highest quality components and standards of workmanship. It was tested by inspectors and found to be in perfect working order before it left our factory. Model: Speaker Tower4 TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. 5. Children should be monitored to ensure that they do not play with the product. 6. When connected the cord should always be readily accessible. 7. The apparatus should not be exposed to dripping or splashing of water or liquids and no objects filled with liquids such as flower vases shall be placed on the product. LIGHTNING FLASH WITH ARROWHEAD SYMBOL The lightning flash with the arrowhead symbol within an equilateral triangle, is intended to alert the user of the presence of uninsulated dangerous voltage within the products’ enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. EXCLAMATION POINT The exclamation point within an equilateral triangle is used to indicate that a specific component should be replaced only by the component specified in the literature for safety reasons. 8. Do not impede the normal ventilation of the product when intended to use. 9. Always leave a minimum distance of 10cm around the unit to ensure sufficient ven- tilation. 10. Open flame sources, such as candles, should not be placed on top of the device. 11. The device is intended for use only in a temperate climate. 12. CAUTION: Danger of explosion if battery is incorrectly replaced or not replaced by the same type or equivalent. Notes: • The images appearing in this manual are for reference only. • Due to continual revision and improvement of our products designs and specifications are subject to change without prior notice. ENGLISH SAFETY PRECAUTIONS 3 1. READ INSTRUCTIONS: All the safety and operating instructions should be read before the product is operated. 2. RETAIN INSTRUCTIONS: The safety and operating instructions should be retained for future r e f e r e n c e. 3. HEED WARNINGS: All warnings on the product and in the operating instructions should be adhered. 4. FOLLOW INSTRUCTIONS: All operating and use instructions should be followed. 5. CLEANING: - Turn Off the unit if it’s on before cleaning. - Unplug the unit from the wall outlet before cleaning. - Do not use liquid cleaners or aerosol cleaners. - Use a damp cloth for cleaning. 6. WATER AND MOISTURE: Do not use this product near water. For example: Near a bathtub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and similar. 7. ACCESSORIES: Do not place this product on an unstable cart, stand, tripod, bracket, or t a b l e. The product may fall, causing serious injury to a child or adult and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions and should use a mounting accessory recommended by the manufacturer. When moving the product in a cart, it should be done with care - quick stops, excessive force and uneven surfaces may turn over the cart with the product causing damage. 8. VENTILATION: Slots and openings in the unit are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation, such as a bookcase or rack, unless proper ventilation is provided, or the manufacturer’s instructions have been adhered. 9. POWER SOURCES: This product should be operated only with the type of power source indicated on the marking label. If you are not sure of the type of power supply of your home, consult your product dealer or local power company. For products intended to operate with battery power, or other sources, refer to the operating instructions. 10. . POWER-CORD PROTECTION: Power-supply cords should be rooted so that they are not likely to be walked on or pinched by items placed upon or against them, paying special attention to the cords at the power plug socket and the jack plug socket. During movement, please take care of the power cord. For example: Tie the power cord with a cable t i e. 11. NON-USE PERI…

Text truncated - open the document above for the full version.

4 Sizzle,Inc. U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: 4 Sizzle,Inc. FRN: 0026379479 Contact Name: Rong Qisong Street Address: 297 Kingsbury Grade, Box 4470-203, Stateline, NV 89449, USA City/Province/Zip: Nevada Telephone No: 602-714-2947 Email: [email protected] This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: 2023/03/15 Signed by (Printed Name/Title):Rong QiSong The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: 4 Sizzle,Inc. Grantee Code: 2ALLS FCC ID: 2ALLSOM-20018 Contact Name: Tina Zhou Street Address: 297 Kingsbury Grade, Box 4470-203, Stateline, NV 89449, USA City/Province/Zip: Nevada Telephone No: 602-714-2947 Email: [email protected] Applicant Signature: Date: 2023/03/15 Signed by (Printed Name/Title): Tina Zhou /Manager

(4 Sizzle,Inc.) (2023.03.15) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID: 2ALLSOM-20018) [4 Sizzle,Inc.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) (Applicant printed name) Tina Zhou (4 Sizzle,Inc.) (2023.03.15) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for(FCC ID: 2ALLSOM-20018) [4 Sizzle,Inc.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Tina Zhou

4 Sizzle,Inc. 2023.03.09 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR EUT NAME: Speaker Tower Trademark: OMOM, BUDLIGHT MODEL : OM-20018 Speaker Tower4 FCC ID: 2ALLSOM-20018 To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - Block Diagram - Schematics - Operational Description required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Client’s signature: Client’s name / title : Tina Zhou/Manager Contact information / address: 297 Kingsbury Grade, Box 4470-203, Stateline, NV 89449, USA

4 Sizzle,Inc. 2023.03.09 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen BCTC Testing Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Client’s signature: Client’s name / title : Tina Zhou/Manager Contact information / address: 297 Kingsbury Grade, Box 4470-203, Stateline, NV 89449, USA

4 Sizzle,Inc. Model Difference Product description: Speaker Tower Model name: OM-20018 Speaker Tower4 Trade Name: OMOM, BUDLIGHT FCC ID: 2ALLSOM-20018 All the model are the same circuit and RF module, except model names. Regards Sincerely Client’s signature: Client’s name / title : Tina Zhou/Manager Contact information / address: 297 Kingsbury Grade, Box 4470-203, Stateline, NV 89449, USA

External Photos

Label & label location 10mm*20mm Speaker Tower FCC ID:2ALLSOM-20018 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

Internal Photos Antenna

FCC §15.247 (i), §2.1091 – RF Exposure FCC ID: 2ALLSOM-20018 Applied procedures / limit According to FCC §15.247(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 Note: ƒ is frequency in MHz * = Power density limit is applicable at frequencies greater than 100 MHz Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm 2 ) Averaging Time |E| 2 ,|H| 2 or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz * = Plane-wave equivalent power density MPE PREDICTION Predication of MPE limit at a given distance, Equation from OET Bulletin 65, Edition 97-01 Where: S = power density P = power input to antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna, R=0.2m TEST RESULTS Tune up Produce power Maximum peak output power (dBm) Output power to antenna (mW) Antenna Gain (numeric) Power Density (S) (mW/ cm2) Limit (mW / cm2 ) Result BT -1±1 0 1 1.000(0dBi) 0.00020 1 Pass

$Q WHQQDGHVFULEH $QWHQQDGHVFULEH $QWHQQDSODWH0RQRSORHDQWHQQD 0DN HQDPHPRGHOQDPH $QW HQQDJDLQG%L )UH TXHQF\UDQJH*+=*+= &RQ QHFWRUW\SHGLUHFW /RF DWLRQ RI PHDUHPHQW*FRPSDQ\QDPH+ ( [WHUQDOYLHZGUDZLQJ 3LFWXUHRIDQWHQQD Manufacturer:OHM TECHNOLOGY (ZHONGSHAN) COMPANY LIMITED Address:Bldg 2, No.142, South Tanshen Road, Tanzhou Town, Zhongshan, 528467 Guangdong, China $QWHQQD5DGLDWLRQ3DWWHUQ 5DGLDWLRQSDWWHUQ#*+= 7RWDO$YHUDJH*DLQGEL  3KL *DLQ  5DGLDWLRQSDWWHUQ#*+= 7RWDO$YHUDJH*DLQGEL  3KL *DLQ  5DGLDWLRQSDWWHUQ#*+= 7RWDO$YHUDJH*DLQGEL  3KL *DLQ 

No.：BCTC/RF-EMC-007 Page: 1 of 80 Edition：A.5 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2302623092E Applicant: 4 Sizzle, Inc. Product Name: Speaker Tower Model/Type reference: OM-20018 Tested Date: 2023-02-06 to 2023-03-06 Issued Date: 2023-03-06 Report No.:BCTC2302623092E No.：BCTC/RF-EMC-007 Page: 2 of 80 Edition：A.5 FCC ID:2ALLSOM-20018 The test report is effective only with both signature and specialized stamp.This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full.The tested sample(s) and the sample information are provided by the client. Product Name: Speaker Tower Trademark: OMOM, BUDLIGHT Model/Type Reference: OM-20018 Speaker Tower4 Prepared For: 4 Sizzle, Inc. Address: 297 Kingsbury Grade, Box 4470-203, Stateline, NV 89449, USA Manufacturer: OHM TECHNOLOGY (ZHONGSHAN) COMPANY LIMITED Address: Bldg 2, No.142, South Tanshen Road, Tanzhou Town, Zhongshan, 528467 Guangdong, China Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: 2023-02-06 Sample tested Date: 2023-02-06 to 2023-03-06 Issue Date: 2023-03-06 Report No.: BCTC2302623092E Test Standards: FCC Part15.247 ANSI C63.10-2013 Test Results: PASS Remark: This is Bluetooth Classic radio test report. Tested by: Approved by: Kelsey Tan/ Project Handler Zero Zhou/Reviewer Report No.:BCTC2302623092E No.：BCTC/RF-EMC-007 Page: 3 of 80 Edition：A.5 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 5 2. Test Summary ....................................................................................................... 6 3. Measurement Uncertainty ..................................................................................... 7 4. Product Information And Test Setup ..................................................................... 8 4.1 Product Information ............................................................................................... 8 4.2 Test Setup Configuration ...................................................................................... 8 4.3 Support Equipment ............................................................................................... 9 4.4 Channel List .......................................................................................................... 9 4.5 Test Mode ........................................................................................................... 10 4.6 Table Of Parameters Of Text Software Setting ................................................... 10 5. Test Facility And Test Instrument Used ............................................................... 11 5.1 Test Facility ......................................................................................................... 11 5.2 Test Instrument Used .......................................................................................... 11 6. Conducted Emissions .......................................................................................... 13 6.1 Block Diagram Of Test Setup .............................................................................. 13 6.2 Limit .................................................................................................................... 13 6.3 Test procedure .................................................................................................... 13 6.4 EUT operating Conditions ................................................................................... 13 6.5 Test Result .......................................................................................................... 14 7. Radiated emissions ............................................................................................. 16 7.1 Block Diagram Of Test Setup .............................................................................. 16 7.2 Limit .................................................................................................................... 17 7.3 Test procedure .................................................................................................... 18 7.4 EUT operating Conditions ................................................................................... 19 7.5 Test Result .......................................................................................................... 20 8. Radiated Band Emission Measurement And Restricted Bands Of Operation ..... 24 8.1 Block Diagram Of Test Setup .............................................................................. 24 8.2 Limit .................................................................................................................... 24 8.3 Test procedure .................................................................................................... 25 8.4 EUT operating Conditions ................................................................................... 25 8.5 Test Result .......................................................................................................... 26 9. Spurious RF Conducted Emissions ..................................................................... 27 9.1 Block Diagram Of Test Setup .............................................................................. 27 9.2 Limit .................................................................................................................... 27 9.3 Test procedure .................................................................................................... 27 9.4 Test Result .......................................................................................................... 28 10. 20 dB Bandwidth .............…

Text truncated - open the document above for the full version.

Report No.:BCTC2302623092E No.：BCTC/RF-EMC-007 Page: 56 of 80 Edition：A.5 Test Graphs Power NVNT 1-DH1 2402MHz Power NVNT 1-DH1 2441MHz Report No.:BCTC2302623092E No.：BCTC/RF-EMC-007 Page: 57 of 80 Edition：A.5 Power NVNT 1-DH1 2480MHz Power NVNT 2-DH1 2402MHz Report No.:BCTC2302623092E No.：BCTC/RF-EMC-007 Page: 58 of 80 Edition：A.5 Power NVNT 2-DH1 2441MHz Power NVNT 2-DH1 2480MHz Report No.:BCTC2302623092E No.：BCTC/RF-EMC-007 Page: 59 of 80 Edition：A.5 Power NVNT 3-DH1 2402MHz Power NVNT 3-DH1 2441MHz Report No.:BCTC2302623092E No.：BCTC/RF-EMC-007 Page: 60 of 80 Edition：A.5 Power NVNT 3-DH1 2480MHz Report No.:BCTC2302623092E No.：BCTC/RF-EMC-007 Page: 61 of 80 Edition：A.5 12. Hopping Channel Separation 12.1 Block Diagram Of Test Setup 12.2 Limit Frequency hopping systems shall have hopping channel carrier frequencies separated by a minimum of 25 kHz or the 20 dB bandwidth of the hopping channel, whichever is greater. Alternatively, frequency hopping systems operating in the 2400-2483.5 MHz band may have hopping channel carrier frequencies that are separated by 25 kHz or two-thirds of the 20 dB bandwidth of the hopping channel, whichever is greater, provided the systems operate with an output power no greater than 0.125W. 12.3 Test procedure 1. Remove the antenna from the EUT and then connect a low RF cable from the antenna port to the spectrum. 2. Set the spectrum analyzer: RBW = 30kHz. VBW = 100kHz , Span = 2.0MHz. Sweep = auto; Detector Function = Peak. Trace = Max hold. 3. Allow the trace to stabilize. Use the marker-delta function to determine the separation between the peaks of the adjacent channels. The limit is specified in one of the subparagraphs of this Section Submit this plot. 12.4 Test Result Condition Mode Hopping Freq1 (MHz) Hopping Freq2 (MHz) HFS (MHz) Limit (MHz) Verdict NVNT 1-DH1 2401.870 2402.872 1.002 0.879 Pass NVNT 1-DH1 2440.872 2441.872 1.000 0.877 Pass NVNT 1-DH1 2478.872 2479.872 1.000 0.871 Pass NVNT 2-DH1 2401.870 2402.872 1.002 0.857 Pass NVNT 2-DH1 2440.872 2441.870 0.998 0.841 Pass NVNT 2-DH1 2478.872 2479.870 0.998 0.870 Pass NVNT 3-DH1 2402.028 2403.028 1.000 0.835 Pass NVNT 3-DH1 2441.030 2442.030 1.000 0.831 Pass NVNT 3-DH1 2479.030 2480.030 1.000 0.828 Pass Report No.:BCTC2302623092E No.：BCTC/RF-EMC-007 Page: 62 of 80 Edition：A.5 Test Graphs CFS NVNT 1-DH1 2402MHz CFS NVNT 1-DH1 2441MHz Report No.:BCTC2302623092E No.：BCTC/RF-EMC-007 Page: 63 of 80 Edition：A.5 CFS NVNT 1-DH1 2480MHz CFS NVNT 2-DH1 2402MHz Report No.:BCTC2302623092E No.：BCTC/RF-EMC-007 Page: 64 of 80 Edition：A.5 CFS NVNT 2-DH1 2441MHz CFS NVNT 2-DH1 2480MHz Report No.:BCTC2302623092E No.：BCTC/RF-EMC-007 Page: 65 of 80 Edition：A.5 CFS NVNT 3-DH1 2402MHz CFS NVNT 3-DH1 2441MHz Report No.:BCTC2302623092E No.：BCTC/RF-EMC-007 Page: 66 of 80 Edition：A.5 CFS NVNT 3-DH1 2480MHz Report No.:BCTC2302623092E No.：BCTC/RF-EMC-007 Page: 67 of 80 Edition：A.5 13. Number Of Hopping Frequency 13.1 Block Diagram Of Test Setup 13.2 Limit Frequency hopping systems in the 2400-2483.5 MHz band shall use at least 15 channels. 13.3 Test procedure 1. Remove the antenna from the EUT and then connect a low RF cable from the antenna port to the spectrum. 2. Set the spectrum analyzer: RBW = 100kHz. VBW = 300kHz. Sweep = auto; Detector Function = Peak. Trace = Max hold. 3. Allow the trace to stabilize. It may prove necessary to break the span up to sections. in order to clearly show all of the hopping frequencies. The limit is specified in one of the subparagraphs of this Section. 4. Set the spectrum analyzer: Start Frequency = 2.4GHz, Stop Frequency = 2.4835GHz. Sweep=auto; 13.4 Test Result Condition Mode Hopping Number Limit Verdict NVNT 1-DH1 79 15 Pass NVNT 2-DH1 79 15 Pass NVNT 3-DH1 79 15 Pass Report No.:BCTC2302623092E No.：BCTC/RF-EMC-007 Page: 68 of 80 Edition：A.5 Test Graphs Hopping No. NVNT 1-DH1 2441MHz Hopping No. NVNT 2-DH1 2441MHz Report No.:BCTC2302623092E No.：BCTC/RF-EMC-007 Page: 69 of 80 Edition：A.5 Hopping No. NVNT 3-DH1 2441MHz Report No.:BCTC2302623092E No.：BCTC/RF-EMC-007 Page: 70 of 80 Edition：A.5 14. Dwell Time 14.1 Block Diagram Of Test Setup 14.2 Limit Frequency hopping systems in the 2400-2483.5 MHz band shall use at least 15 channels. The average time of occupancy on any channel shall not be greater than 0.4 seconds within a period of 0.4 seconds multiplied by the number of hopping channels employed. Frequency hopping systems may avoid or suppress transmissions on a particular hopping frequency provided that a minimum of 15 channels are used. 14.3 Test procedure 1. Remove the antenna from the EUT and then connect a low RF cable from the antenna port to the spectrum. 2. Set spectrum analyzer span = 0. Centred on a hopping channel; 3. Set RBW = 1MHz and VBW = 3MHz.Sweep = as necessary to capture the entire dwell time per hopping channel. Set the EUT for DH5, DH3 and DH1 packet transmitting. 4. Use the marker-delta function to determine the dwell time. If this value varies with different modes of operation (e.g.. data rate. modulation format. etc.). repeat this test for each variation. The limit is specified in one of the subparagraphs of this Section. Submit this plot(s). 14.4 Test Result DH5 Packet permit maximum 1600 / 79 / 6 hops per second in each channel (5 time slots RX, 1 time slot TX). DH3 Packet permit maximum 1600 / 79 / 4 hops per second in each channel (3 time slots RX, 1 time slot TX). DH1 Packet permit maximum 1600 / 79 /2 hops per second in each channel (1 time slot RX, 1 time slot TX). So, the Dwell Time can be calculated as follows: DH5:1600/79/6*0.4*79*(MkrDelta)/1000 DH3:1600/79/4*0.4*79*(MkrDelta)/1000 DH1:1600/79/2*0.4*79*(MkrDelta)/1000 Remark: Mkr Delta is once pulse time. Report No.:BCTC2302623092E No.：BCTC/RF-EMC-007 Page: 71 of 80 Edition：A.5 Modulation Channel Data Packet pulse time(ms) Dwell Time(s) Limits(s) GFSK Middle 1DH1 0.388 0.124 0.4 1DH3 1.642 0.263 0.4 1DH5 2.892 0.308 0.4 π/ 4 DQPSK Middle 2DH1 0.398 0.127 0.4 2DH3 1.644 0.263 0.4 2DH5 2.894 0.309 0.4 8…

Text truncated - open the document above for the full version.

Report No.:BCTC2302623092E No.：BCTC/RF-EMC-007 Page: 78 of 80 Edition：A.5 17. EUT Test Setup Photographs Conducted emissions Radiated Measurement Photos Report No.:BCTC2302623092E No.：BCTC/RF-EMC-007 Page: 79 of 80 Edition：A.5