2AM7I-RE003Remote Control

Covered Equipment Certification Attestation Letter 8/26/2026 Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: 2AM7I-RE003 Lovehoney Group UK Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Lovehoney Group UK Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Lovehoney Group UK Ltd. (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Signed: Printed name: John Qiao Title: Project Senior Project Engineer Company Name: QIMA Testing (Shanghai) Limited Date: 8/26/2026

Section 2.911(d)(7) USA Agent for Service of Process Company name: Lovehoney Group UK Ltd. Address: 100 Locksbrook Road, Bath, BA1 3EN, United Kingdom FCC ID: 2AM7I-RE003 2.911(d)(7) USA Designated Agent for Service of Process We, Lovehoney Group UK Ltd. (“the applicant”) designate Lovehoney Group US Retail LLC for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for m atters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our phys ical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-r elated administrative or judicial proceeding involving the equipment, whichever is later. Applicant Company name: Lovehoney Group UK Ltd. Address: 100 Locksbrook Road, Bath, BA1 3EN, United Kingdom FRN: 0026726463 Contact Name: Eyal Bar-or Telephone No: 01225318881 Email: [email protected] Signature: USA Agent Company name: Lovehoney Group US Retail LLC Address: 5156 Southridge Parkway, Suite 110, College Park, Atlanta, GA, 30349, USA FRN: 0034060442 Contact Name: Eyal Bar-or Telephone No: 678-545-0647 Email: [email protected] Signature: Title: Director, Global Quality & Compliance Title: Director, Global Quality & Compliance Date: 17/04/2026 Date: 17/04/2026 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-th e-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.2

17/04/2026 AUTHORITY TO ACT AS AGENT - FCC On our behalf, I appoint QIMA Testing (Shanghai) Limited, to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported, or marketed, as defined in FCC regulations, will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by QIMA Testing Ltd., still resides with us. Sincerely, Printed name: Eyal Bar Or, Director, Global Quality and Compliance

8/26/2026 Nemko North America, Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 REQUEST FOR CONFIDENTIALITY - FCC FCC ID: 2AM7I-RE003 Pursuant to Sections 0.457(d) and 0.459 of the Commission’s Rules and FCC Guidance document 726920, we hereby request permanent confidential treatment of exhibits identified as such in the table below and request they are permanently withheld from public review based on the documents containing trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. Exhibit Type of Confidentiality Requested Block Diagrams ☒ Permanent ☐ Short Term External Photos ------------------ ☐ Short Term Internal Photos ☐ Permanent* ☐ Short Term Operation Description ☒ Permanent ☐ Short Term Parts List & Placement/BOM ☒ Permanent ☐ Short Term Tune-Up Procedure ☐ Permanent ☐ Short Term Schematic Diagrams ☒ Permanent ☐ Short Term Test Setup Photos ------------------ ☐ Short Term User’s Manual ☐ Permanent* ☐ Short Term The asterisked items (*) require further information to be provided in this justification letter before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. Sincerely, Signed : Printed name: John Qiao Title: Project Senior Project Engineer Company Name: QIMA Testing (Shanghai) Limited

Appendix II Page 1 of 7 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26093 APPENDIX II P HOTOGRAPHS OF EUT Appendix II Page 2 of 7 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26093 FIGURE 1 USB RECHARGEABLE REMOTE CONTROL (RE-003) FRONT VIEW FIGURE 2 USB RECHARGEABLE REMOTE CONTROL (RE-003) BACK VIEW Appendix II Page 3 of 7 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26093 FIGURE 3 USB RECHARGEABLE REMOTE CONTROL (RE-003) SIDE VIEW-1 FIGURE 4 USB RECHARGEABLE REMOTE CONTROL (RE-003) SIDE VIEW-2 Appendix II Page 4 of 7 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26093 FIGURE 5 USB RECHARGEABLE REMOTE CONTROL (RE-003) SIDE VIEW-3 FIGURE 6 USB RECHARGEABLE REMOTE CONTROL (RE-003) SIDE VIEW-4

FCC ID: 2AM7I-RE003 IC: 28162-RE003 Label Location: Label: HVIN: RE003 3.7V⎓0.24A Lovehoney Group UK Ltd Address: 100 Locksbrook Road, Bath, BA1 3EN, UK Made in China Label Location

Appendix II Page 5 of 7 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26093 FIGURE 7 USB RECHARGEABLE REMOTE CONTROL (RE-003) COVER REMOVE FIGURE 8 USB RECHARGEABLE REMOTE CONTROL (RE-003) MAINBOARD FRONT Antenna (PCB part+ Silicone) Appendix II Page 6 of 7 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26093 FIGURE 9 USB RECHARGEABLE REMOTE CONTROL (RE-003) MAINBOARD BACK FIGURE 10 USB RECHARGEABLE REMOTE CONTROL (RE-003) CRY S TAL ON MAINBOARD Antenna (PCB part) Appendix II Page 7 of 7 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26093 FIGURE 11 USB RECHARGEABLE REMOTE CONTROL (RE-003) BATTERY --END OF APPENDIX II--

Lovehoney Group UK Ltd. FCC ID: 2AM7I-RE003 Page 1 of 3 Audix Technology (Shanghai) Co., Ltd. JAREY LU / Deputy Assistant Manager HUIMIN YAN / Assistant RADIO FREQUENCY EXPOSURE EVALATION General Information Applicant : Lovehoney Group UK Ltd. EUT Description : USB rechargeable remote control Model No. : RE-003 Radio Tech : FSK Frequency : 433.92MHz Description of Test Facility Name of Firm : Audix Technology (Shanghai) Co., Ltd. Site Location : 3F, Building 34, No. 680 Guiping Rd., Caohejing, Hi-Tech Park, Shanghai 200233, China NVLAP, Lab Code : 200371-0 FCC Designation Number : CN5027 Test Firm Registration Number: 954668 Results The EUT is operated as one portable device, and it is compliant with the RF Exposure Exemption. Producer : Lovehoney Group UK Ltd. FCC ID: 2AM7I-RE003 Page 2 of 3 Audix Technology (Shanghai) Co., Ltd. Evaluation Method KDB 447498 D04 Interim General RF Exposure Guidance v01 Applicable Standard: KDB 447498 D04 v01: Section 2.1.2 1-mW Test Exemption: Per § 1.1307(b)(3)(i)(A), a single RF source is exempt RF device (from the requirement to show data demonstrating compliance to RF exposure limits, as previously mentioned) if the available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption applies to all operating configurations and exposure conditions, for the frequency range 100 kHz to 100 GHz, regardless of fixed, mobile, or portable device exposure conditions. This is a standalone exemption, and it cannot be applied in conjunction with any other test exemption. FCC CFR 47 §1.1307(b)(3)(i)(A): A single RF source is exempt if The available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption may not be used in conjunction with other exemption criteria other than those in paragraph (b)(3)(ii)(A) of this section. Medical implant devices may only use this exemption and that in paragraph (b)(3)(ii)(A); KDB 412172 D01 Determining ERP and EIRP v01r01: Section 1.1. For Field Strength Approach(linear terms): eirp = p t x g t = (E x d) 2 /30 where p t = transmitter output power in watts, g t = numeric gain of the transmitting antenna (unitless), E = electric field strength in V/m, d = measurement distance in meters (m). erp = eirp/1.64 = (E x d) 2 /(30 x 1.64) where all terms are as previously defined. Section 1.3 Relationship Between ERP and EIRP: ERP = EIRP – 2.15 dB. Lovehoney Group UK Ltd. FCC ID: 2AM7I-RE003 Page 3 of 3 Audix Technology (Shanghai) Co., Ltd. RF Exposure evaluation: Mode Max. Measured value Measurement distance (d) E.I.R.P 1-mW Exemption dBuV/m @3m V/m @3m m W mW mW TX 433.92MHz 85.07 0.017927 3 0.000096 0.096 1 Note1: For this EUT, t he Maximum E.I. R.P is no greater than the 1-mW exemption, that meets the exemption requirement, the RF exposure evaluation is not required. -END-

Frequency 433.92MHz Antenna Model ANT0001 supplier Dongguan Hengli Yufa Electronic Processing Shop Supplier Address No. 18 Dongxing Road, Tiantou Village, Hengli Town, Dongguan City, Guangdong Province Antenna TypePCB+Silicone antenna Antenna Specifications PCB, 7/0.1mm Copper wire Silicone Overall dimensions: 1.0x50MM Technical Specifications for 433MHz Remote Control Receiver Antenna Only radiated measurements are used to show compliance with FCC limits for fundamental and spurious emissions.

Lovehoney Group UK Ltd. FCC ID: 2AM7I-RE003 Page 1 of 33 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26093 Prepared For: Lovehoney Group UK Ltd. 100 Locksbrook Road, Bath, BA1 3EN, United Kingdom Prepared By: Audix Technology (Shanghai) Co., Ltd. 3F, Building 34, No. 680 Guiping Rd., Caohejing, Hi-Tech Park, Shanghai 200233, China Tel: +86-21-64955500 File No. : C1D2604010 Report No. : ACI-F26093 Date of Test : 2026.04.19-27 Date of Report : 2026.05.12 TEST REPORT On behalf of Lovehoney Group UK Ltd. Product Name: USB rechargeable remote control Model No.: RE-003 FCC ID: 2AM7I-RE003 The statement is based on a single evaluation of one sample of the above-mentioned products. It does not imply an assessment of the whole production and does not permit the use of the test lab logo. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. TESTING NVLAP LAB CODE 200371-0 Lovehoney Group UK Ltd. FCC ID: 2AM7I-RE003 Page 2 of 33 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26093 TABLE OF CONTENTS Page 1 SUMMARY OF STANDARDS AND RESULTS .......................................................................... 4 1.1 Description of Standards and Results ......................................................................................... 4 2 GENERAL INFORMATION .......................................................................................................... 5 2.1 Description of Equipment Under Test ........................................................................................ 5 2.2 Test Information ......................................................................................................................... 6 2.3 Duty Cycle Check ...................................................................................................................... 6 2.4 Sample Description .................................................................................................................... 7 2.5 Supported equipment .................................................................................................................. 7 2.6 Description of Test Facility ........................................................................................................ 7 3 RADIATED EMISSION AND FILED STRENGTH OF SPURIOUS EMISSIONS TEST TEST ....................................................................................................................................................... 8 3.1 Test Equipment ........................................................................................................................... 8 3.2 Block Diagram of Test Setup ..................................................................................................... 9 3.3 Radiated Emission Limit .......................................................................................................... 11 3.4 Test Configuration .................................................................................................................... 12 3.5 Operating Condition of EUT .................................................................................................... 12 3.6 Test Procedures ........................................................................................................................ 13 3.7 Test Results .............................................................................................................................. 14 4 PERIODIC OPERATION MEASUREMENT ............................................................................ 19 4.1 Test Equipment ......................................................................................................................... 19 4.2 Block Diagram of Test Setup ................................................................................................... 19 4.3 Specification Limits (§15.231(a)) ............................................................................................ 19 4.4 Operating Condition of EUT .................................................................................................... 20 4.5 Test Procedure .......................................................................................................................... 20 4.6 Test Results .............................................................................................................................. 21 5 FILED STRENGTH OF FUNDAMENTAL MEASUREMENT ............................................... 24 5.1 Test Equipment ......................................................................................................................... 24 5.2 Block Diagram of Test Setup ................................................................................................... 24 5.3 Specification Limits ((§15.231(b)) ........................................................................................... 24 5.4 Operating Condition of EUT .................................................................................................... 24 5.5 Test Procedure .......................................................................................................................... 24 5.6 Test Results .............................................................................................................................. 25 6 BANDWIDTH EMISSIONS MEASUREMENT ........................................................................ 28 6.1 Test Equipment ......................................................................................................................... 28 6.2 Block Diagram of Test Setup ................................................................................................... 28 6.3 Specification Limits (§15.231(c)) ............................................................................................ 28 6.4 Operating Condition of EUT ..…

Text truncated - open the document above for the full version.

Appendix I Page 1 of 3 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26093 APPENDIX I P HOTOGRAPHS OF TEST Appendix I Page 2 of 3 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26093 Test Set-Up Photos 1. Radiated Test Appendix I Page 3 of 3 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26093 2. RF Test RF TEST --END OF APPENDDIX I--