2AM86VHEM-E04Smart phone with GSM, WCDMA, LTE, WiFi and Bluetooth

XXXXXXXXXXX Quick Start Guide Guía de Inicio Rápido VHEM-E04 Antes de utilizar el dispositivo , re vi se y descargue la última Guía de Inicio Rápido en https: //www.wikomobile.co m. Para encender su dispositivo , mantenga pulsado el botón de encendido hasta que la pantalla se encienda. Siga las instru cciones de las siguientes f iguras para co nfigurar su dispositivo . •El se rvi cio 4G depende del apoyo de su operador de red y de su despliegue de se rvi cios relevantes. Póngase en contact o con su operador para act iva r el servicio 4G. •Si ha int roducido dos tarj etas SIM, solo la tarjeta de datos móvil predeterminada puede soportar el se rvi cio de da tos. •El se rvi cio 4G puede no est ar disponible en algunas zonas debido a las int erf erencias de la red. In fo rmación de seguridad Por f avo r, lea atentamente toda la inf ormación de seguridad antes de utilizar su dispositivo . Para obtener inf ormación más detallada, vi si te https://www.wikomobile.co m. Funcionamiento y seguri dad •Para evitar posibles daños auditivo s, no escuche a un volumen alt o durante mucho tiempo. •Temperatura s ideales: 0°C a 35°C para el funcionamiento, -20°C a +45°C para el almacenamiento. •Los fabricantes de marcapasos re co mi endan mantener una distancia mínima de 15 cm entre un dispositivo y un marcapasos para evi tar posibles int erf erencias con el marcapasos. Si utiliza un marcapasos, su jete el dispositivo por el lado opuesto al marcapasos y no lo lleve en el bolsillo delantero . •Respete las leyes y reglamentos locales al utilizar el dispositivo . Para reducir el ri esgo de accidentes, no utilice su dispositivo inalámbri co mi entra s conduce. •Evite utilizar el aparato en un lugar polvori ento, húmedo o su cio, Español 1 o ce rca de un ca mpo magnéti co . • Cuando se ca rgue, el adaptador debe est ar conectado a un enchufe ce rcano y f ácilmente acce sible. Utilice adaptadores de co rri ente y ca rgadores homologados. • Desenchufe el ca rgador de las tomas de co rri ente y del dispositivo cuando no lo utilice. • Por f avo r, consulte a su médico y al fabricante del dispositivo para determinar si su uso puede int erf eri r con el funcionamiento de su dispositivo médico. • Cumpla las normas y reglamentos establecidos por los hospitales y centro s de salud. • No utilice, almacene o transporte el dispositivo en lugares donde se almacenen productos inf lamables o explosivos (en una gasolinera, depósito de petróleo o planta quími ca , por ejemplo). El uso de su dispositivo en est os entornos aumenta el ri esgo de explosión o incendio. • No int ente reemplazar la baterí a usted mi smo - puede dañar la baterí a, lo que podría causar un sobrecalentami ento, un incendio y lesiones. La baterí a incorporada en su dispositivo debe se r re vi sada por wiko o por un pro veedor de se rvi cios autori zado. • Mantenga la baterí a alejada del fuego, del calor excesi vo y de la luz s olar direct a. No lo coloque sobre o dentro de disposi tivo s de calefacción. No lo desarme, ni modifique, ni lo tire , ni lo apriete. No int roduzca objetos extraños en él, ni l o su merj a en líquidos, ni lo exponga a fuerzas o pre siones ext ernas, ya que podría provo ca r fugas, sobrecalentarse, incendiarse o incluso explotar. • Para reducir el ri esgo de incendios o descargas eléctri ca s, no exponga el ca rgador o los acceso ri os al agua o la humedad. No coloque el ca rgador ce rca de fuentes de calor, co mo un horno mi croondas, otro s tipos de hornos o un radiador. No toque el ca rgador o el dispositivo con las manos mojadas. Est o podría pro vo ca r co rt oci rcuitos, ave rí as o descargas eléctri ca s. No desarme ni repare el ca rgador. Si se detect a una falla, desconecte el ca rgador de la fuente de co rri ente y del dispositivo y póngase en contact o con el centro de se rvi cio o distri buidor autori zado para obtener ayuda. • Siga todas las normas de seguridad para los niños. El ca rgador y su cable no son juguetes. Algunos cables de ca rgadores pre sentan un ri esgo de asf ixia. Manténgalo fuera del alcance de los niños. No dejes que los niños pongan el ca rgador o su cable en su boca. Este ca rgador y el cable no deben se r utilizados por niños. • Apague su dispositivo en cualquier área con una atmósf era potencialmente explosiva y re spete todas las señales e instru cciones. • Asegúrese de que el ca rgador de co rri ente cu mple los requisitos del Anexo Q de la norma IEC/EN 62368-1 y que ha si do probado y aprobado de acuerdo con las normas nacionales o locales. Consulte más inf ormación sobre seguridad en la últ ima Guía de Inicio Rápido en https: //www.wikomobile.co m. En caso de anomalía o defecto en tu producto, por favor, contacta con el distribuidor para que te ofrezca la información relacionada con la tramitación de la garantía. Informacón sobre la eliminación y el El símbolo en el producto, la batería, la literatura o el embalaje significa que los productos y las baterías deben llevarse a los puntos de recogida selectiva de residuos designados por las autoridades locales al final de su vida útil. Esto garantizará que los residuos de EEE (Equipos reciclaje 2 información, póngase en contacto con las autoridades locales, el minorista o el servicio de eliminación de residuos domésticos, o visite el sitio web https://www.wikomobile.com. Reducción de sustancias peligrosas Este dispositivo y sus accesorios eléctricos cumplen con las normas locales aplicables sobre la restricción del uso de ciertas su st ancias peligrosa s en equipos eléctri co s y electrónicos, co mo la normativa REACH de la EU (U nión Europea), la direct iva RoHS (Rest ri cción de Sust ancias Peligrosa s) y la direct iva so bre baterí as (cuando se incluya). Para las declaraciones de conformidad sobre REACH y RoHS, vi si te el si tio web https: //www.wikomobile.co m. Para obtener más detalles sobre los valores de SAR, consulte "I nformaci ón sobre la Exposi ción a RF" en la últ ima Guía de Inicio Rápido descargada de https: //www.wikomobile.co m. …

Text truncated - open the document above for the full version.

WIKOSAS Date:2022/06/15 To:FederalCommunicationsCommission, Authorization&EvaluationDivision, 7435OaklandMillsRoad, Columbia,MD21046 ToWhomItMayConcern: TheWikoSAS,theundersigned,herebyauthorizesMrs.WendyZhanfrom ShenzhenMorlabCommunicationsTechnologyCo.,Ltd.,toactonthebehalfof theWikoSAS.solelyinmattersrelatingtotheapplicationforanFCCequipment authorizationforFCCID:2AM86VHEM-E04includingthesigningofdocumentsin connectionwiththisApplication.NecessaryactscarriedoutShenzhenMorlab CommunicationsTechnologyCo.,Ltd.onourbehalfoftheWikoSASin connectionwiththeApplicationshallhavethesameeffectasactsoftheWIKOSAS. WikoSASalsoherebycertifythatnopartytothisapplicationissubjecttoadenialof benefits,includingFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuse Actof1988,21U.S.C.862. Thankyouforyourattentiontothismatter. YoursSincerely, Signatory: Contactname:AaronLiang Title:CertificationDirector Tel:0033610144980 Email:[email protected] Companyname:WIKOSAS

WIKOSAS Date:2022/06/15 To:FederalCommunicationsCommission,Authorization&EvaluationDivision,7435Oakland MillsRoad,Columbia,MD21046 Re:RequestofConfidentialityforFCCID:2AM86VHEM-E04 ToWhomitmayconcern: Pursuanttosections0.457and0.459ofCommission’sRules(CFR47),andSection552(b)(4)of theFreedomofInformationAct,WikoSASherebyrequestsconfidentialityandtreatmentof certaininformationaccompanyingthisapplication.Thematerialscontaintradesecretsand proprietaryinformationnotcustomarilyreleasedtothepublic.Thepublicdisclosureofthese mattersmightbeharmfultotheApplicantandprovideunjustifiedbenefitstoitscompetitors. WearealsoherebyrequestShort-TermConfidentialityfor180daysfromgrantdateasoutlined inPublicNoticeDA04-1705.ThisprovisionwillgiveWIKOSAStemporaryconfidentialityof commerciallysensitiveinformationpriortoproductrelease. TherequestedPermanentandShort-TermConfidentialexhibitsarelistedasfollows: PERMANENTANDSHORT-TERMCONFIDENTIALLIST ExhibitDescription PERMANENT 1BlockDiagram 2OperationalDescription 3Schematics 4BOM 5Tuneupprocedure SHORT-TERM 6ExternalPhotos 7InternalPhotos 8Test-SetupPhotos 9UserManual TheApplicantunderstandsthatpursuanttoRule0.457,disclosureofthisapplicationandall accompanyingdocumentations,whereapplicable,willnotbemadepublicbeforethedateof theGrantforthisapplication. Signatory： Contactname:AaronLiang Title:CertificationDirector Tel:0033610144980 Email:[email protected] Companyname:WIKOSAS

WIKO SAS UNII Declaration Letter We have declared below featured for FCC equipment authorization, device FCC ID: 2AM86VHEM-E04 (1) DFS Device -- Master, Client with Radar detection capability , Client without radar detection capability, N/A (2) Active / Passive Scanning , adhoc mode access point capability Frequency Band (MHz) Active Scanning (the device can transmit a probe (beacon)) passive scanning (where the device is can listen only with no probes) Ad Hoc Mode capability Access point capability 2412 – 2462 MHz Yes, No Yes, No Yes, No Yes, No 2422 – 2452 MHz Yes, No Yes, No Yes, No Yes, No 5745 – 5825 MHz Yes, No Yes, No Yes, No Yes, No 5755 – 5795 MHz Yes, No Yes, No Yes, No Yes, No 5180 – 5240 MHz Yes, No Yes, No Yes, No Yes, No 5190 – 5230 MHz Yes, No Yes, No Yes, No Yes, No 5260 – 5320 MHz Yes, No Yes, No Yes, No Yes, No 5270 – 5310 MHz Yes, No Yes, No Yes, No Yes, No 5500 – 5700 MHz Yes, No Yes, No Yes, No Yes, No 5510 – 5670 MHz Yes, No Yes, No Yes, No Yes, No (3) Country code selection ability - Yes , No If no, pls explain how was implemented : Country is selected as US by default and user can not change the country code. (4) Meet 15.202 requirement - Yes , No , pls check below : A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply , No Apply , (If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled) WIKO SAS The device configuration can not be modified by user as program is not exposed to user by any means. Hardware does not allow USB connection for user which is must to change the configuration. If you have any questions, please feel free to contact me at the address shown below. Yours Sincerely, Signatory: Contact name: Aaron Liang Title: Certification Director Tel: 0033610144980 Email: [email protected] Company name: WIKO SAS

FCC ID: 2AM86VHEM-E04 External Photos 1. EUT front view 2. EUT rear view 3. EUT left side view 4. EUT right side view 5. EUT top view 6. EUT bottom view 7. Accessories

1.Label 2.Label location E-label: SettingsAbout phone Regulatory labels

FCC ID: 2AM86VHEM-E04 In ternalPhotos 1. EUT uncoverview 2. Antennaview WWANAux Antenna1(LB) WLAN2.4G/BTAntenna WWANMAIN Antenna(L/M/HB) WWANAux Antenna2(M/HB) WLAN5G/GPSAntenna

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ22050016S01 Annex C Plots of System Performance Check Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.05.18 System Check_750MHz_Head Communication System: UID 0, CW (0); Frequency: 750 MHz;Duty Cycle: 1:1 Medium: HSL_750 Medium parameters used: f = 750 MHz; σ = 0.911 S/m; ε r = 41.879; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(10.2, 10.2, 10.2) @ 750 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2021.06.22 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) CW 750/Area Scan (81x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.96 W/kg CW 750/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 73.26 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 7.02 W/kg SAR(1 g) = 2.13 W/kg; SAR(10 g) = 1.38 W/kg Maximum value of SAR (measured) = 2.94 W/kg 0 dB = 2.94 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.05.20 System Check_900MHz_Head Communication System: UID 0, CW (0); Frequency: 900 MHz;Duty Cycle: 1:1 Medium: HSL_900 Medium parameters used: f = 900 MHz; σ = 1.012 S/m; ε r = 42.606; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(9.81, 9.81, 9.81) @ 900 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2021.06.22 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) CW900/Area Scan (71x71x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 3.41 W/kg CW900/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 55.19 V/m; Power Drift = -0.17 dB Peak SAR (extrapolated) = 4.07 W/kg SAR(1 g) = 2.81 W/kg; SAR(10 g) = 1.79 W/kg Maximum value of SAR (measured) = 3.45 W/kg 0 dB = 3.45 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.05.22 System Check_1800MHz_Head Communication System: UID 0, CW (0); Frequency: 1800 MHz;Duty Cycle: 1:1 Medium: HSL_1800 Medium parameters used: f = 1800 MHz; σ = 1.381 S/m; ε r = 40.584; ρ = 1000 kg/m 3 Ambient Temperature：23.3 °C; Liquid Temperature：22.3 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(8.26, 8.26, 8.26) @ 1800 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2021.06.22 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) CW1800/Area Scan (81x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 12.2 W/kg CW1800/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 87.77 V/m; Power Drift = -0.09 dB Peak SAR (extrapolated) = 15.3 W/kg SAR(1 g) = 9.38 W/kg; SAR(10 g) = 4.75 W/kg Maximum value of SAR (measured) = 12.2 W/kg 0 dB = 12.2 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.05.23 System Check_2000MHz_Head Communication System: UID 0, CW (0); Frequency: 2000 MHz;Duty Cycle: 1:1 Medium: HSL_2000 Medium parameters used: f = 2000 MHz; σ = 1.428 S/m; ε r = 39.953; ρ = 1000 kg/m 3 Ambient Temperature：23.3 °C; Liquid Temperature：22.2 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(7.99, 7.99, 7.99) @ 2000 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2021.06.22 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) CW2000/Area Scan (81x81x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 11.9 W/kg CW2000/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 91.90 V/m; Power Drift = -0.18 dB Peak SAR (extrapolated) = 19.1 W/kg SAR(1 g) = 10.42 W/kg; SAR(10 g) = 5.29 W/kg Maximum value of SAR (measured) = 11.6 W/kg 0 dB = 11.6 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.05.25 System Check_2300MHz_Head Communication System: UID 0, CW (0); Frequency: 2300 MHz;Duty Cycle: 1:1 Medium: HSL_2300 Medium parameters used: f = 2300 MHz; σ = 1.64 S/m; ε r = 39.251; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.2 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(7.66, 7.66, 7.66) @ 2300 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2021.06.22 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) CW2300/Area Scan (81x101x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 13.2 W/kg CW2300/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 89.68 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 23.5 W/kg SAR(1 g) = 11.7 W/kg; SAR(10 g) = 5.67 W/kg Maximum value of SAR (measured) = 14.3 W/kg 0 dB = 14.3 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.05.27 System Check_2450MHz_Head Communication System: UID 0, CW (0); Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: HSL_2450 Medium parameters used: f = 2450 MHz; σ = 1.817 S/m; ε r = 38.801; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.2…

Text truncated - open the document above for the full version.

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ22050016S01 Annex D Plots of Maximum SAR Test Results Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.05.20 GSM850_GPRS(2 TX slots)_Right Cheek_Ch189 Communication System: UID 0, GSM850(class 10) (0); Frequency: 836.4 MHz;Duty Cycle: 1:4.15 Medium: HSL_900 Medium parameters used: f = 836.4 MHz; σ = 0.943 S/m; ε r = 42.978; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(9.81, 9.81, 9.81) @ 836.4 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2021.06.22 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Ch189/Area Scan (71x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.411 W/kg Ch189/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 18.38 V/m; Power Drift = -0.11 dB Peak SAR (extrapolated) = 0.704 W/kg SAR(1 g) = 0.370 W/kg; SAR(10 g) = 0.212 W/kg Maximum value of SAR (measured) = 0.404 W/kg 0 dB = 0.404 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.05.23 GSM1900_GPRS(2 TX slots)_Right Cheek_Ch661 Communication System: UID 0, GSM1900(Class 10) (0); Frequency: 1880 MHz;Duty Cycle: 1:4.15 Medium: HSL_2000 Medium parameters used: f = 1880 MHz; σ = 1.366 S/m; ε r = 40.167; ρ = 1000 kg/m 3 Ambient Temperature：23.3 °C; Liquid Temperature：22.2 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(7.99, 7.99, 7.99) @ 1880 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2021.06.22 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Ch661/Area Scan (71x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.604 W/kg Ch661/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 14.71 V/m; Power Drift = -0.07 dB Peak SAR (extrapolated) = 0.864 W/kg SAR(1 g) = 0.490 W/kg; SAR(10 g) = 0.277 W/kg Maximum value of SAR (measured) = 0.521 W/kg 0 dB = 0.521 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.05.23 WCDMA Band II_RMC 12.2Kbps_Right Cheek_Ch9400 Communication System: UID 0, UMTS-FDD (0); Frequency: 1880 MHz;Duty Cycle: 1:1 Medium: HSL_2000 Medium parameters used: f = 1880 MHz; σ = 1.366 S/m; ε r = 40.167; ρ = 1000 kg/m 3 Ambient Temperature：23.3 °C; Liquid Temperature：22.2 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(7.99, 7.99, 7.99) @ 1880 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2021.06.22 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Ch9400/Area Scan (71x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.09 W/kg Ch9400/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 18.98 V/m; Power Drift = -0.09 dB Peak SAR (extrapolated) = 1.26 W/kg SAR(1 g) = 0.674 W/kg; SAR(10 g) = 0.362 W/kg Maximum value of SAR (measured) = 0.970 W/kg 0 dB = 0.970 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.05.22 WCDMA Band IV_RMC 12.2Kbps_Right Cheek_Ch1413 Communication System: UID 0, UMTS-FDD (0); Frequency: 1732.6 MHz;Duty Cycle: 1:1 Medium: HSL_1800 Medium parameters used: f = 1733 MHz; σ = 1.412 S/m; ε r = 39.814; ρ = 1000 kg/m 3 Ambient Temperature：23.3 °C; Liquid Temperature：22.3 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(8.26, 8.26, 8.26) @ 1733 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2021.06.22 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Ch1413/Area Scan (71x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.804 W/kg Ch1413/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 15.39 V/m; Power Drift = -0.18 dB Peak SAR (extrapolated) = 0.890 W/kg SAR(1 g) = 0.489 W/kg; SAR(10 g) = 0.271 W/kg Maximum value of SAR (measured) = 0.652 W/kg 0 dB = 0.652 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.05.20 WCDMA Band V_RMC 12.2Kbps_Right Cheek_Ch4182 Communication System: UID 0, UMTS-FDD (0); Frequency: 836.4 MHz;Duty Cycle: 1:1 Medium: HSL_900 Medium parameters used: f = 836.4 MHz; σ = 0.943 S/m; ε r = 42.978; ρ = 1000 kg/m 3 Ambient Temperature：23.2 °C; Liquid Temperature：22.1 °C DASY5 Configuration: - Probe: EX3DV4 - SN7608; ConvF(9.81, 9.81, 9.81) @ 836.4 MHz; Calibrated: 2022.01.12 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn480; Calibrated: 2021.06.22 - Phantom: SAM 2; Type: QD000P40CC; Serial: TP:1464 - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Ch4182/Area Scan (71x91x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.648 W/kg Ch4182/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 23.79 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 1.17 W/kg SAR(1 g) = 0.617 W/kg; SAR(10 g) = 0.355 W/kg Maximum value of SAR (measured) = 0.676 W/kg 0 dB = 0.676 W/kg Test Laboratory: Shenzhen Morlab Communications Technology Co., Ltd. Date: 2022.05.23 LTE Band 2_20MHz_QPSK_1RB_0Offset_Right Tilt_Ch18900 Communicatio…

Text truncated - open the document above for the full version.

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ22050016S01 Annex E Conducted Power Note: Conducted power unit: dBm The target power was recorded in the manufacture document. 128189251128189251 824.2836.4848.8824.2836.4848.8 33.5033.5333.4534.0024.5024.5324.4525.00 33.5233.5533.4634.0024.5224.5524.4625.00 30.7130.7430.6832.0024.7124.7424.6826.000.06 28.8528.7028.5230.0024.5924.4424.2625.740.33 27.8727.6827.7428.0024.8724.6824.7425.000.19 26.9727.0226.9028.0017.9718.0217.9019.000.12 23.8023.8423.7625.0017.8017.8417.7619.000.08 21.7821.8221.7823.0017.5217.5617.5218.740.04 20.7620.8520.7321.0017.7617.8517.7318.000.12 Max.33.55Max.24.87 512661810512661810 1850.218801909.81850.218801909.8 30.3230.3830.0031.0021.3221.3821.0022.00 30.3630.4030.0331.0021.3621.4021.0322.00 28.0228.0727.9829.0022.0222.0721.9823.000.09 26.2226.2626.1827.0021.9622.0021.9222.740.08 24.3324.3824.2925.0021.3321.3821.2922.000.09 25.9326.1526.1127.0016.9317.1517.1118.000.22 23.3223.4723.4224.0017.3217.4717.4218.000.15 21.8721.9121.8622.0017.6117.6517.6017.740.05 20.7820.8520.8321.0017.7817.8517.8318.000.07 Max.30.40Max.22.07 926294009538131214131513413241824233 966298009938153716381738435744074458 1852.418801907.61712.41732.61752.6826.4836.4846.6 3GPP Rel 99RMC 12.2Kbps23.2123.2823.1724.0022.9223.0423.0124.0023.0723.1723.1324.00 3GPP Rel 6HSDPA Subtest-122.8422.7922.7323.5022.5922.7422.6823.5022.6122.3022.7023.50 3GPP Rel 6HSDPA Subtest-222.8522.7722.7523.5022.5722.6722.6523.5022.5922.5622.6523.50 3GPP Rel 6HSDPA Subtest-322.3422.3422.2423.0022.0922.1822.2223.0022.1522.0622.1823.00 3GPP Rel 6HSDPA Subtest-422.3122.2622.1823.0022.0622.1722.1423.0022.0422.0622.1623.00 3GPP Rel 6HSUPA Subtest-122.3022.2622.2423.0022.0522.1722.1223.0022.0722.0722.1923.00 3GPP Rel 6HSUPA Subtest-222.8322.8022.7423.5022.5522.7222.6523.5022.6622.5522.6923.50 3GPP Rel 6HSUPA Subtest-321.8421.7921.7422.5021.6021.6921.6322.5021.6121.5821.6723.50 3GPP Rel 6HSUPA Subtest-422.8322.8122.6923.5022.5422.6922.6523.5022.5822.5922.7623.50 3GPP Rel 6HSUPA Subtest-521.8521.7521.6822.5021.5421.6621.6522.5021.5221.5621.7122.50 3GPP Rel 7 HSPA+ (16QAM) Subtest-121.8221.7821.6922.5021.5421.7021.6822.5021.5321.5821.6322.50 Cable Loss0.8Cable Loss0.8Cable Loss0.6 Max.23.28Max.23.04Max.23.17 Full Power for Main ANT GSM850Burst Average Power (dBm)Frame-Average Power (dBm) TX Channel Frequency (MHz) GSM 1 Tx slot GPRS 1 Tx slot GPRS 2 Tx slots Tune-up Limit (dBm) Tune-up Limit (dBm) Ch Delta > 0.5 0.10 GPRS 3 Tx slots GPRS 4 Tx slots EDGE 1 Tx slot EDGE 2 Tx slots EDGE 3 Tx slots EDGE 4 Tx slots Mode AttenuatorCable Loss : 0.6 GSM1900Burst Average Power (dBm)Frame-Average Power (dBm) TX Channel Frequency (MHz) GSM 1 Tx slot GPRS 1 Tx slot Tune-up Limit (dBm) Ch Delta > 0.5 0.40 GPRS 2 Tx slots GPRS 3 Tx slots GPRS 4 Tx slots EDGE 1 Tx slot EDGE 2 Tx slots EDGE 3 Tx slots EDGE 4 Tx slots Mode AttenuatorCable Loss : 0.8 BandWCDMA Band IIWCDMA Band IVWCDMA Band V TX Channel Rx Channel Frequency (MHz) Tune-up Limit (dBm) Tune-up Limit (dBm) Tune-up Limit (dBm) Attenuator Mode Tune-up Limit (dBm) BW [MHz]Modulation RB Size RB Offset Low Channel Middle Channel High Channel BW [MHz] Modulation RB Size RB Offset Low Channel Middle Channel High Channel 187001890019100200502017520300 18601880190017201732.51745 20QPSK1022.8822.9322.8620QPSK1022.8622.8822.82 20QPSK14922.8622.9022.8220QPSK14922.7322.8322.77 20QPSK19922.7422.5522.5720QPSK19922.5922.6822.64 20QPSK50021.9822.0822.0220QPSK50021.8121.8521.82 20QPSK502421.9622.0422.0020QPSK502421.8021.8321.77 20QPSK505021.9522.0121.9520QPSK505021.7521.7821.76 20QPSK100022.0222.0621.9820QPSK100021.8021.8221.78 2016QAM1022.2522.3122.212016QAM1021.8521.8821.81 2016QAM14922.2222.2822.172016QAM14921.8121.8521.79 2016QAM19922.1522.1922.162016QAM19921.7221.7721.75 2016QAM50021.0521.0821.032016QAM50020.7920.8720.84 2016QAM502421.0321.0421.012016QAM502420.7620.8420.80 2016QAM505020.9620.9720.882016QAM505020.7420.8020.77 2016QAM100020.9721.0020.962016QAM100020.8120.8820.87 2064QAM1021.3621.4221.272064QAM1021.1421.2021.16 2064QAM14921.3421.3521.292064QAM14921.0621.1221.10 2064QAM19921.1421.1821.132064QAM19920.9721.0421.02 2064QAM50020.2220.2720.242064QAM50020.0720.1220.09 2064QAM502420.2020.2320.202064QAM502420.0120.0720.05 2064QAM505020.1620.2120.192064QAM505019.9720.0420.03 2064QAM100020.1320.2020.172064QAM1000 19.9420.0219.99 18675 1890019125200252017520325 1857.518801902.51717.5 1732.51747.5 15QPSK1022.8322.9122.7915QPSK1022.8422.7922.79 15QPSK13722.7522.7722.7015QPSK13722.7222.7122.67 15QPSK17422.6322.5422.4315QPSK17422.4822.5422.61 15QPSK36021.8922.0121.9315QPSK36021.6821.7221.74 15QPSK362021.9121.9121.9915QPSK362021.7921.8021.62 15QPSK363921.9021.9221.9115QPSK363921.6621.7421.70 15QPSK75021.9422.0321.8715QPSK75021.7821.8121.70 1516QAM1022.1922.1622.131516QAM1021.7721.7421.71 1516QAM13722.0822.2122.031516QAM13721.8021.7821.74 1516QAM17422.0222.0722.071516QAM17421.6221.7621.73 1516QAM36021.0020.9720.961516QAM36020.6520.7520.79 1516QAM362020.9920.9120.981516QAM362020.6420.7920.69 1516QAM363920.9220.9220.771516QAM363920.6120.6920.67 1516QAM75020.9020.9420.841516QAM75020.7220.8420.73 1564QAM1021.4721.4521.361564QAM1021.0521.1921.12 1564QAM13721.3721.3421.401564QAM13721.0621.0621.03 1564QAM17421.2121.2121.151564QAM17420.8821.0220.91 1564QAM36020.2220.3820.261564QAM36020.0620.0820.05 1564QAM362020.2520.2320.181564QAM362019.9120.0020.03 1564QAM363920.1720.2020.201564QAM363919.8519.9119.93 1564QAM75020.1220.2620.241564QAM75019.9020.0219.88 186501890019150200002017520350 18551880190517151732.51750 10QPSK1022.8022.7922.7510QPSK1022.8522.7522.70 10QPSK12522.8122.8422.7210QPSK12522.6422.7822.73 10QPSK14922.60 22.5122.4310 QPSK14922.5022.5322.55 10QPSK25021.9422.0521.9510QPSK25021.6821.8221.69 10QPSK251221.9321.902…

Text truncated - open the document above for the full version.

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ22050016S01 Annex F DASY Calibration Certificate

Annual validation for test lab. Appendix Annual validation for Test L…

Text truncated - open the document above for the full version.