2AMA8-UPROmedia player

06 07 080910111213141516 4 Settings 06 07 080910111213141516 5 Troubleshooting ? Warning Under any circumstances, never try to repair the box by yourself, this will invalidate warranty. Do not open the box due to electric shock risk. If any fault occurs, first check the following instruction before taking the box for repairing. If you are unable to remedy a problem by following hints, consult your dealer for help. ProblemSolution No signal on the TV Can not turn on your Smart TV Box Can not connect to network Remote Control does not respond Some TV can not display entire screen securely connected. Check if the HDMI or AV cable is 1) input source on your TV. Check if your have selected the correct 2) plugged into the DC socket of your Smart Check if the power connector is completely 1) Check if the power supply is stable. 2) securely connected and the Ethernet works Make sure that the network cable is 1) well. Make sure that WiFi network is connected 2) Make sure that the batteries are good. 1) no longer than 8 meters. remote control and your Smart TV Box is Make sure that the distance between the 2) Setup the screen display position of your Smart TV Box. Settings->display->Display position TV Box. and the security key for the encrupted network is correct. Make sure that you select the correct IP 3) address settings. Preface Statements We have made every effort to provide the most current information about the product. We do not grant any guarantees as to the contents of the present instruction manual and purposes. The disclaim any implied guarantees concerning market value or suitability for specific information contained here is an instruction intended to enable the correct usage and maintenance of the receiver. We reserve itself the right to introduce amendments, changes or translations of the user without prior notification thereof. For this reason, we recommend youmanual regularly visit our website in order to obtain the latest information. Thanks very much for choosing our Smart TV BOX.In order to make it more convenient using and properly keep it for reference. for you to use proficiently, we provide you with a user manual. Please read it carefully before 1 Package Contents NO. Picture NamePiece 1 2 3 4 5 1 1 1 1 1 Note: Other contents are optional. Specification Smart TV BOX IR remote control Power Adaptor HDMI Cable User Guide Page Up Page Down FWD VOL + VOL - Volume Down Volume Up Last One Next One TV AV cable Television HDMI cable Network cable Router Adaptor cable Octa Core Android
6.0
Marshmallow
OS Mali-T820MP3 GPU up to 750MHz Amlogic S912 Octa core ARM Cortex-A53 up to 2GHz+ ARM Video Decoder: 4Kp60 10-bit H.265, 4Kp60 VP9 Profile 2, 4Kp30 H.264 576i/p, 720p, 1080i/p, 4Kx2K Ethernet GigaBit Rj45 Port and internal WiFi 802.11 ac/a/b/g/n Dual Band WiFi (2.4ghz/5gHZ) Move to “Settings” icon, press ok to enter into system settings. You will see the menu on the following picture. If you want to see more settings, please select “More Setting” sicon. Wi-Fi With Wi-Fi enabled, you’ll need to click on your network’s name and enter the password. An on screen keyboard should appear if you’re using the standard infrared remote control. Ethernet If you will use a network cable instead of Wi-Fi, please select this option instead. MEDIA MEDIA FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Shen Zhen Zoomtak Electronics Co., Ltd Add: B4 Building,Anle Industrial Zone,No.172 Hangcheng Blvd,Baoan Xixiang District,Shenzhen,518126 China Date: Oct. 26, 2020 Dear Sir/Madam, We, Shen Zhen Zoomtak Electronics Co., Ltd Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model: Product name: media player Model no.: Uplus, U pro, mySDATV M20, Umax, Prodigy Elite, miracle FCC ID: 2AMA8-UPRO Sincerely, (Signed) Name / Title: Huang Jingwei/Manager Company: Shen Zhen Zoomtak Electronics Co., Ltd Address: B4 Building,Anle Industrial Zone,No.172 Hangcheng Blvd,Baoan Xixiang District,Shenzhen,518126 China Phone: +86-755-29033689 E-Mail: [email protected]

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 < Oct. 26, 2020 > TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: Name media player Model Uplus, U pro, mySDATV M20, Umax, Prodigy Elite, miracle FCC ID 2AMA8-UPRO For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, (Signed) Name / Title: Huang Jingwei/Manager Company: Shen Zhen Zoomtak Electronics Co., Ltd Address: B4 Building,Anle Industrial Zone,No.172 Hangcheng Blvd,Baoan Xixiang District,Shenzhen,518126 China Phone: +86-755-29033689 E-Mail: [email protected]

Shen Zhen Zoomtak Electronics Co., Ltd B4 Building,Anle Industrial Zone,No.172 Hangcheng Blvd,Baoan Xixiang District,Shenzhen,518126 China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 10/26/2020 To whom it may concern: We, Shen Zhen Zoomtak Electronics Co., Ltd. the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2AMA8-UPRO including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, (Signed) Name / Title: Huang Jingwei/Manager Company: Shen Zhen Zoomtak Electronics Co., Ltd Address: B4 Building,Anle Industrial Zone,No.172 Hangcheng Blvd,Baoan Xixiang District,Shenzhen,518126 China Phone: +86-755-29033689 E-Mail: [email protected]

Shen Zhen Zoomtak Electronics Co., Ltd B4 Building,Anle Industrial Zone,No.172 Hangcheng Blvd,Baoan Xixiang District,Shenzhen,518126 China UNII Device Declaration Letter To whom it may concern: We have declared below featured for FCC equipment authorization, Device FCC ID: 2AMA8-UPRO (1) DFS Device: Master Client with Radar detection capability N/A Client without radar detection capability, (2) Active / Passive Scanning , adhoc mode access point capability Frequency Band (MHz) Active Scanning (the device can transmit a probe (beacon)) passive scanning (where the device is can listen only with no probes) Ad Hoc Mode capability Access point capability 5180-5240 Yes No Yes No Yes No Yes No 5190-5230 Yes No Yes No Yes No Yes No 5210-5210 Yes No Yes No Yes No Yes No 5745-5825 Yes No Yes No Yes No Yes No 5755-5795 Yes No Yes No Yes No Yes No 5775-5775 Yes No Yes No Yes No Yes No (3) Country code selection ability Yes No If yes, pls explain how it was implemented: (4) Meet 15.202 requirement Yes No pls check below : A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. Apply Does not apply (If apply, pls help to provide explanation on it was implement, and how software was controlled) Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, (Signed) Name / Title: Huang Jingwei/Manager Company: Shen Zhen Zoomtak Electronics Co., Ltd Address: B4 Building,Anle Industrial Zone,No.172 Hangcheng Blvd,Baoan Xixiang District,Shenzhen,518126 China Phone: +86-755-29033689 E-Mail: [email protected]

FCC ID: 2AMA8-UPRO FCC ID: 2AMA8-UPRO FCC ID: 2AMA8-UPRO

FCC ID: 2AMA8-UPRO Label and Location Label and Location media player Zoomtak Model No.: Uplus FCC ID: 2AMA8-UPRO This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC ID: 2AMA8-UPRO FCC ID: 2AMA8-UPRO FCC ID: 2AMA8-UPRO FCC ID: 2AMA8-UPRO FCC ID: 2AMA8-UPRO

RF Exposure evaluation FCC ID: 2AMA8-UPRO 1. Reference According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1091 RF exposure is calculated. KDB447498 D01: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies 2. Limit Limits for Maximum Permissible Exposure (MPE)/Controlled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 1842/f 61.4 / / 1.63 4.89/f 0.163 / / (100) * (900/f 2 )* 1.0 f/300 5 6 6 6 6 6 Limits for Maximum Permissible Exposure (MPE)/Uncontrolled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 824/f 27.5 / / 1.63 2.19/f 0.073 / / (100) * (180/f 2 )* 0.2 f/1500 1.0 30 30 30 30 30 F=frequency in MHz *=Plane-wave equivalent power density 3. Manufacturing tolerance 802.11b(PK) Channel Channel 01 Channel 6 Channel 11 Target (dBm) 15.0 15.0 15.0 Tolerance ±(dB) 1.0 1.0 1.0 802.11g(PK) Channel Channel 01 Channel 6 Channel 11 Target (dBm) 17.0 17.0 17.0 Tolerance ±(dB) 1.0 1.0 1.0 802.11n(HT20)(PK) Channel Channel 01 Channel 6 Channel 11 Target (dBm) 16.0 16.0 16.0 Tolerance ±(dB) 1.0 1.0 1.0 802.11n(HT40)(PK) Channel Channel 03 Channel 6 Channel 9 Target (dBm) 16.0 16.0 16.0 Tolerance ±(dB) 1.0 1.0 1.0 [5GWLAN Band 1] IEEE 802.11a (Average) Channel Channel 36 Channel 40 Channel 48 Target (dBm) 12.0 12.0 12.0 Tolerance ±(dB) 1.0 1.0 1.0 IEEE 802.11n HT20 (Average) Channel Channel 36 Channel 40 Channel 48 Target (dBm) 12.0 12.0 12.0 Tolerance ±(dB) 1.0 1.0 1.0 IEEE 802.11ac VHT20 (Average) Channel Channel 36 Channel 40 Channel 48 Target (dBm) 12.0 12.0 12.0 Tolerance ±(dB) 1.0 1.0 1.0 IEEE 802.11n HT40 (Average) Channel Channel 38 --- Channel 46 Target (dBm) 12.0 --- 12.0 Tolerance ±(dB) 1.0 --- 1.0 IEEE 802.11ac VHT40 (Average) Channel Channel 38 --- Channel 46 Target (dBm) 12.0 --- 12.0 Tolerance ±(dB) 1.0 --- 1.0 IEEE 802.11ac VHT80 (Average) Channel --- Channel 42 --- Target (dBm) --- 12.0 --- Tolerance ±(dB) --- 1.0 --- [5GWLAN Band 3] IEEE 802.11a (Average) Channel Channel 149 Channel 157 Channel 165 Target (dBm) 12.0 12.0 12.0 Tolerance ±(dB) 1.0 1.0 1.0 IEEE 802.11n HT20 (Average) Channel Channel 149 Channel 157 Channel 165 Target (dBm) 12.0 12.0 12.0 Tolerance ±(dB) 1.0 1.0 1.0 IEEE 802.11ac VHT20 (Average) Channel Channel 149 Channel 157 Channel 165 Target (dBm) 12.0 12.0 12.0 Tolerance ±(dB) 1.0 1.0 1.0 IEEE 802.11n HT40 (Average) Channel Channel 151 --- Channel 159 Target (dBm) 12.0 --- 12.0 Tolerance ±(dB) 1.0 --- 1.0 IEEE 802.11ac VHT40 (Average) Channel Channel 151 --- Channel 159 Target (dBm) 12.0 --- 12.0 Tolerance ±(dB) 1.0 --- 1.0 IEEE 802.11ac VHT80 (Average) Channel --- Channel 155 --- Target (dBm) --- 12.0 --- Tolerance ±(dB) --- 1.0 --- 4. MPE Calculation Method Predication of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna 5. Result As declared by the Applicant, the EUT is a wireless device used in a fix application, at least 20 cm from any body part of the user or nearby persons; from the maximum EUT RF output power, the minimum separation distance, r =20cm, as well as the gain of the used antenna is 0.00 dBi, the RF power density can be obtained. 2.4G WIFI Modulation Type Output power Antenna Gain (dBi) Antenna Gain (linear) MPE (mW/cm 2 ) MPE Limits (mW/cm 2 ) dBm mW IEEE 802.11b 16.0 39.81072 0.00 1.00 0.007924 1.0000 IEEE 802.11g 18.0 63.09573 0.00 1.00 0.012559 1.0000 IEEE 802.11n HT20 17.0 50.11872 0.00 1.00 0.009976 1.0000 IEEE 802.11n HT40 17.0 50.11872 0.00 1.00 0.009976 1.0000 [5GWLAN Band 1] Modulation Type Output power Antenna Gain (dBi) Antenna Gain (linear) MPE (mW/cm 2 ) MPE Limits (mW/cm 2 ) dBm mW IEEE 802.11a 13.0 19.95262 0.00 1.00 0.003971 1.0000 IEEE 802.11n HT20 13.0 19.95262 0.00 1.00 0.003971 1.0000 IEEE 802.11ac VHT20 13.0 19.95262 0.00 1.00 0.003971 1.0000 IEEE 802.11n HT40 13.0 19.95262 0.00 1.00 0.003971 1.0000 IEEE 802.11ac VHT40 13.0 19.95262 0.00 1.00 0.003971 1.0000 IEEE 802.11ac VHT80 13.0 19.95262 0.00 1.00 0.003971 1.0000 [5GWLAN Band 3] Modulation Type Output power Antenna Gain (dBi) Antenna Gain (linear) MPE (mW/cm 2 ) MPE Limits (mW/cm 2 ) dBm mW IEEE 802.11a 13.0 19.95262 0.00 1.00 0.003971 1.0000 IEEE 802.11n HT20 13.0 19.95262 0.00 1.00 0.003971 1.0000 IEEE 802.11ac VHT20 13.0 19.95262 0.00 1.00 0.003971 1.0000 IEEE 802.11n HT40 13.0 19.95262 0.00 1.00 0.003971 1.0000 IEEE 802.11ac VHT40 13.0 19.95262 0.00 1.00 0.003971 1.0000 IEEE 802.11ac VHT80 13.0 19.95262 0.00 1.00 0.003971 1.0000 6. Conclusion The measurement results comply with the FCC Limit per 47 CFR 2.1091 for the uncontrolled RF Exposure of mobile device.

Shenzhen Global Test Service Co.,Ltd. No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong FCC PART 15 SUBPART C TEST REPORT FCC PART 15 SUBPART E 15.407 Report Reference No. ..................... : FCC ID. ............................................ : GTS20201022015-1-1 2AMA8-UPRO Compiled by ( position+printed name+signature) .. : File administrators Jimmy Wang Supervised by ( position+printed name+signature) .. : Test Engineer Aaron Tan Approved by ( position+printed name+signature) .. : Manager Jason Hu Date of issue ..................................... : Oct.25, 2020 Representative Laboratory Name .: Shenzhen Global Test Service Co.,Ltd. Address ............................................ : No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong, China Applicant’s name ............................ : Shen Zhen Zoomtak Electronics Co., Ltd Address ............................................ : B4 Building,Anle Industrial Zone,No.172 Hangcheng Blvd,Baoan Xixiang District,Shenzhen,518126 China Test specification ...........................: Standard ........................................... : FCC Part 15 Subpart E 15.407 TRF Originator .................................. : Shenzhen Global Test Service Co.,Ltd. Master TRF ....................................... : Dated 2014-12 Shenzhen Global Test Service Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Global Test Service Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Global Test Service Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .....................: media player Trade Mark ....................................... : Zoomtak Manufacturer ................................... : Shen Zhen Zoomtak Electronics Co., Ltd Model/Type reference....................... : Uplus Listed Models .................................. : U pro,mySDATV M20,Umax,Prodigy Elite,miracle Ratings ............................................. : 5V3A Modulation ....................................... : OFDM Frequency .......................................... From 5180MHz-5240MHz, 5745MHz-5825MHz Result................................................ : PASS Report No.: GTS20201022015-1-1 Page 2 of 44 T E S T R E P O R T Test Report No. : GTS20201022015-1-1 Oct.25, 2020 ____________________________________________________________________________________ Date of issue Equipment under Test : media player Model /Type : UPlus Listed Models : U pro,mySDATV M20,Umax,Prodigy Elite,miracle Applicant : Shen Zhen Zoomtak Electronics Co., Ltd Address : B4 Building,Anle Industrial Zone,No.172 Hangcheng Blvd, Baoan Xixiang District,Shenzhen,518126 China Manufacturer : Shen Zhen Zoomtak Electronics Co., Ltd Address : B4 Building,Anle Industrial Zone,No.172 Hangcheng Blvd, Baoan Xixiang District,Shenzhen,518126 China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: GTS20201022015-1-1 Page 3 of 44 Contents 1 T E S T S T A N D A R D S ................................................................. 4 2 S U M M A R Y ............................................................................ 5 2.1 General Remarks 5 2.2 Product Description 5 2.3 Equipment Under Test 5 2.4 Short description of the Equipment under Test (EUT) 5 2.5 EUT operation mode 6 2.6 Block Diagram of Test Setup 6 2.7 Special Accessories 6 2.8 Related Submittal(s) / Grant (s) 6 2.9 Modifications 6 3 T E S T E N V I R O N M E N T .............................................................. 7 3.1 Address of the test laboratory 7 3.2 Test Facility 7 3.3 Environmental conditions 7 3.4 Test Description 8 3.5 Statement of the measurement uncertainty 8 3.6 Equipments Used during the Test 9 4 T E S T C O N D I T I O N S A N D R E S U L T S ........................................... 10 4.1 AC Power Conducted Emission 10 4.2 Radiated Emissions 13 4.3 Maximum Conducted Average Output Power 19 4.4 Power Spectral Density 21 4.5 Emission Bandwidth (26dBm Bandwidth) 28 4.6 Minimum Emission Bandwidth (6dBm Bandwidth) 32 4.7 Frequency Stability 36 5 T E S T S E T U P P H O T O S O F T H E E U T ......................................... 38 6 P H O T O S O F T H E E U T ........................................................... 39 Report No.: GTS20201022015-1-1 Page 4 of 44 1 T E S T S T A N D A R D S The tests were performed according to following standards: FCC Rules Part 15 Subpart E—Unlicensed National Information Infrastructure Devices ANSI C63.10-2013: American National Standard for Testing Unlicensed Wireless Devices KDB789033 D02: General UNII Test Procedures New Rules v01r02 Report No.: GTS20201022015-1-1 Page 5 of 44 2 S U M M A R Y 2.1 General Remarks Date of receipt of test sample : Sep.18,2020 Testing commenced on : Sep.19,2020 Testing concluded on : Oct.25, 2020 2.2 Product Description Product Description: media player Model: Uplus Power supply: DC 5V From External circuit Adapter： Mode:QFD12W-005300 Input:AC100-240V-50/60Hz，0.4A Output:DC 5V,3A Sample ID: GTS20201022015-1-1#(Engineer sample) GTS20201022015-1-2#(Normal sample) Hardware version: U PLUS V1.1 Software version: V1.0 WIFI Supported type: 20MHz system 40MHz system 80MHz system 160MHz system 802.11a 802.11n 802.11ac 802.11n 802.11ac 802.11ac N/A Operation frequency: 5180MHz-5240MHz 5745MHz-5825MHz 5190MHz-5230MHz 5755MHz-5795MHz 5210MHz 5775MHz N/A Modulation: OFDM OFDM OFDM N/A Channel number:…

Text truncated - open the document above for the full version.

FCC ID: 2AMA8-UPRO FCC ID: 2AMA8-UPRO