2AMH3-MIQIS17101B3-in-1 Wireless Charging Station + Light and Alarm Clock

MERKURY INNOVATIONS LLC Covered Equipment Certification Attestation Letter 4/16/2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2AMH3-MIQIS17101B MERKURY INNOVATIONS LLC (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. MERKURY INNOVATIONS LLC (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. MERKURY INNOVATIONS LLC (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Signed: Printed name: Joan Blendowski Title: Manager Company Name: MERKURY INNOVATIONS LLC Date: 4/16/2026

MERKURY INNOVATIONS LLC * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. U.S. Agent Designation for Service of Process - Certification Attestation Letter 4/16/2026 TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTN.: Reviewing Engineer FCC ID: 2AMH3-MIQIS17101B FRN of applicant: 0026513606 Per section 2.911(d)(7) of the FCC rules, [MERKURY INNOVATIONS LLC] (“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process: Company Name: MERKURY INNOVATIONS LLC FCC Registration Number (FRN): 0026513606 Physical U.S. Company Address: 45 BROADWAY 3RD FLOOR, NEW YORK, NY 10006 United States Contact Person: Joan Blendowski Agent Email Address: [email protected] The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Agent Signed (if different from Applicant): Signed: Printed name: Joan Blendowski Title: Manager Company Name: MERKURY INNOVATIONS LLC Date: 4/16/2026 Signed: Printed name: Joan Blendowski Title: Production Company Name: MERKURY INNOVATIONS LLC Date: 4/16/2026

DATE: 4/16/2026 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Shenzhen EU Testing Laboratory Limited (101, Building B1, Fuqiao Fourth Area, Qiaotou Community Fuhai Subdistrict Baoan District,Shenzhen,China) (Name of Agent company name and address) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with MERKURY INNOVATIONS LLC (45 BROADWAY 3RD FLOOR, NEW YORK, NY 10006 United States ) (Applicant Name and address) Signed: Printed name: Joan Blendowski Title: Manager Company Name: MERKURY INNOVATIONS LLC Date: 4/16/2026

Date 4/16/2026 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Compliance Testing, LLC to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). Sincerely, Signed: Printed name: Joan Blendowski Title: Manager Company Name: MERKURY INNOVATIONS LLC Date: 4/16/2026

DATE 4/16/2026 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: ___ 2AMH3-MIQIS17101B ______ Product Name: ___ 3-in-1 Wireless Charging Station + Light and Alarm Clock___ Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...) • Schematics • Block diagram • Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Signed: Printed name: Joan Blendowski Title: Manager Company Name: MERKURY INNOVATIONS LLC Date: 4/16/2026

DATE : 4/16/2026 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AMH3-MIQIS17101B Product Name: 3-in-1 Wireless Charging Station + Light and Alarm Clock Request for Short-Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission rules, and in accordance with the FCC Public notice dated June 15, 2004 (DA 04-1705), we hereby request short-term confidentiality for the following items prior to marketing the device.:  Test Setup Photos  External Photos  Internal Photos  User Manual The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Signed: Printed name: Joan Blendowski Title: Manager Company Name: MERKURY INNOVATIONS LLC Date: 4/16/2026

MERKURY INNOVATIONS LLC Declaration on Model Differences We, MERKURY INNOVATIONS LLC 45 BROADWAY 3RD FLOOR, NEW YORK, NY 10006 United States Declare that the following product(s): Product Name: 3-in-1 Wireless Charging Station + Light and Alarm Clock Model No.: MI-QIS17-101B, MI-QIS17-199B FCC ID: 2AMH3-MIQIS17101B All models are same with electrical parameters and internal circuit structure, but only differ in appearance color and model name. Therefore, the (MI-QIS17-101B) model will be the primary test model. The manufacturer would take all the responsibilities for the above product(s). For and on behalf of NY 10006 United States Authorized person Location Name: Joan Blendowski Position: Manager Date of issue: 2026-04-16 *I hereby declare that I am entitled to sign on behalf of the applicant and that the information supplied is correct and complete.

Label Location on EUT Label Product Name: 3-in -1 Wireless Charging Station + Light and Alarm Clock Model No.: MI-QIS17-101B Input: 9V 3A Wireless Charging Output for Smartphone: 5W/7.5W/10W/15W Wireless Charging Output for AirPods: 5W Wireless Charging Output for Apple Watch: 2W FCC ID: 2AMH3-MIQIS17101B

TEST REPORT Report No.: 8334EU011908W2 Applicant: MERKURY INNOVATIONS LLC Address: 45 BROADWAY 3RD FLOOR, NEW YORK, NY 10006 United States Product Name: 3-in-1 Wireless Charging Station + Light and Alarm Clock Model No.: MI-QIS17-101B (refer to clause 2.4) Trademark: N/A FCC ID: 2AMH3-MIQIS17101B Test Standard(s): 47 CFR Part 1 Subpart I Section 1.1310 47 CFR Part 2, Subpart J, Section 2.1091 Date of Receipt: Sep. 19, 2025 Test Date: Sep. 19, 2025 – Oct. 16, 2025 Date of Issue: Mar. 20, 2026 ISSUED BY: SHENZHEN EU TESTING LABORATORY LIMITED Prepared by: Reviewed and Approved by: ____________________ _____________________ Mikey Zhu/ Engineer Sally Zhang/ Manager Page 2 of 13 Report No.: 8334EU011908W2 TRF No.: FCC MPE_WPT (A02) Revision Record Report Version Issued Date Description Status V0 Mar. 20, 2026 Original Valid Page 3 of 13 Report No.: 8334EU011908W2 TRF No.: FCC MPE_WPT (A02) Table of Contents 1 COVER PAGE .................................................................................................................................. 1 2 GENERAL INFORMATION ...................................................................................................................... 4 2.1 APPLICANT INFORMATION .................................................................................................................. 4 2.2 MANUFACTURER INFORMATION .......................................................................................................... 4 2.3 FACTORY INFORMATION ..................................................................................................................... 4 2.4 GENERAL DESCRIPTION OF E.U.T. ..................................................................................................... 4 2.5 TECHNICAL INFORMATION OF E.U.T. .................................................................................................. 5 3 TEST SUMMARY ...................................................................................................................................... 6 3.1 TEST STANDARD ............................................................................................................................... 6 3.2 TEST VERDICT ................................................................................................................................... 6 3.3 TEST LABORATORY ........................................................................................................................... 6 4 TEST CONFIGURATION .......................................................................................................................... 7 4.1 TEST ENVIRONMENT .......................................................................................................................... 7 4.2 TEST EQUIPMENT .............................................................................................................................. 7 4.3 TEST MODE ...................................................................................................................................... 7 4.4 MEASUREMENT UNCERTAINTY ........................................................................................................... 8 5 RF EXPOSURE EVALUATION ................................................................................................................ 9 5.1 TEST REQUIREMENT .......................................................................................................................... 9 5.2 TEST SETUP .................................................................................................................................... 10 5.3 EVALUATION RESULT ...................................................................................................................... 11 ANNEX A TEST SETUP PHOTOS ................................................................................................................. 12 Page 4 of 13 Report No.: 8334EU011908W2 TRF No.: FCC MPE_WPT (A02) 2 General Information 2.1 Applicant Information Applicant MERKURY INNOVATIONS LLC Address 45 BROADWAY 3RD FLOOR, NEW YORK, NY 10006 United States 2.2 Manufacturer Information Manufacturer WIN-LONG INDUSTRIAL CO., LIMITED Address 5/F Block A, No.10 East Area Shangxue Industrial Area, Bantian Town, Longgang District, Shenzhen, China 2.3 Factory Information Factory WIN-LONG INDUSTRIAL CO., LIMITED Address 5/F Block A, No.10 East Area Shangxue Industrial Area, Bantian Town, Longgang District, Shenzhen, China 2.4 General Description of E.U.T. Product Name 3-in -1 Wireless Charging Station + Light and Alarm Clock Model No. Under Test MI-QIS17-101B List Model No. MI-QIS17-199B Description of Model differentiation All models are same with electrical parameters and internal circuit structure, but only differ in appearance color and model name. (this information provided by the customer) Rating(s) Input: 9V2A Wireless Charging Output for Smartphone: 5W/7.5W/10W/15W Wireless Charging Output for AirPods: 5W Wireless Charging Output for Apple Watch: 2W Product Type Mobile Portable Fix Location Test Sample No. -1/2(Normal Sample), -2/2(Engineering Sample) Hardware Version N/A Software Version N/A Remark For a more detailed features description, please refer to the manufacturer’s specifications or the User’s Manual. Page 5 of 13 Report No.: 8334EU011908W2 TRF No.: FCC MPE_WPT (A02) 2.5 Technical Information of E.U.T. Network and Wireless Connectivity Wireless Power Transfer (WPT) The requirement for the following technical information of the EUT was tested in this report: Technology WPT Operating Frequency 110.1-205KHz 322.27KHz Modulation Type FSK Antenna Type Inductive Loop Coil Antenna Antenna Gain(Peak) 0 dBi Remark The above information are declared by the applicant, EU-LAB is not responsible for the information accuracy provided by the applicant. Page 6 of 13 Report No.: 8334EU011908W2 TRF No.: FCC MPE_WPT (A02) 3 Test Summary 3.1 Test Standard The test…

Text truncated - open the document above for the full version.

TEST REPORT Report No.: 8334EU011908W1 Applicant: MERKURY INNOVATIONS LLC Address: 45 BROADWAY 3RD FLOOR, NEW YORK, NY 10006 United States Product Name: 3-in-1 Wireless Charging Station + Light and Alarm Clock Model No.: MI-QIS17-101B (refer to clause 2.4) Trademark: N/A FCC ID: 2AMH3-MIQIS17101B Test Standard(s): 47 CFR Part 15 Subpart C Test Result: Pass Date of Receipt: Sep. 19, 2025 Test Date: Sep. 19, 2025 – Oct. 16, 2025 Date of Issue: Mar. 20, 2026 ISSUED BY: SHENZHEN EU TESTING LABORATORY LIMITED Prepared by: Reviewed and Approved by: ____________________ _____________________ Mikey Zhu/ Engineer Sally Zhang/ Manager Page 2 of 28 Report No.: 8334EU011908W1 TRF No.: FCC Part 15 Subpart C_WPT (A02) Revision Record Report Version Issued Date Description Status V0 Mar. 20, 2026 Original Valid Page 3 of 28 Report No.: 8334EU011908W1 TRF No.: FCC Part 15 Subpart C_WPT (A02) Table of Contents 1 COVER PAGE .................................................................................................................................. 1 2 GENERAL INFORMATION ...................................................................................................................... 4 2.1 APPLICANT INFORMATION .................................................................................................................. 4 2.2 MANUFACTURER INFORMATION .......................................................................................................... 4 2.3 FACTORY INFORMATION ..................................................................................................................... 4 2.4 GENERAL DESCRIPTION OF E.U.T. ..................................................................................................... 4 2.5 TECHNICAL INFORMATION OF E.U.T. .................................................................................................. 5 3 TEST SUMMARY ...................................................................................................................................... 6 3.1 TEST STANDARD ............................................................................................................................... 6 3.2 TEST VERDICT ................................................................................................................................... 6 3.3 TEST LABORATORY ........................................................................................................................... 6 4 TEST CONFIGURATION .......................................................................................................................... 7 4.1 TEST ENVIRONMENT .......................................................................................................................... 7 4.2 TEST EQUIPMENT .............................................................................................................................. 7 4.3 DESCRIPTION OF SUPPORT UNIT ........................................................................................................ 8 4.4 TEST MODE ...................................................................................................................................... 8 4.5 DESCRIPTION OF CALCULATION ......................................................................................................... 8 4.6 MEASUREMENT UNCERTAINTY ........................................................................................................... 9 4.7 DEVIATION FROM STANDARDS ........................................................................................................... 9 4.8 ABNORMALITIES FROM STANDARD CONDITION ................................................................................... 9 5 TEST ITEMS ........................................................................................................................................... 10 5.1 ANTENNA REQUIREMENT .................................................................................................................. 10 5.1.1 Test Requirement .............................................................................................................. 10 5.1.2 Antenna Anti-Replacement Construction .......................................................................... 10 5.1.3 Antenna Gain .................................................................................................................... 10 5.2 CONDUCTED EMISSION AT AC POWER LINE ..................................................................................... 11 5.2.1 Test Requirement .............................................................................................................. 11 5.2.2 Test Setup Diagram .......................................................................................................... 11 5.2.3 Test Procedure .................................................................................................................. 11 5.2.4 Test Data ........................................................................................................................... 11 5.3 EMISSIONS BANDWIDTH ................................................................................................................... 14 5.3.1 Test Requirement .............................................................................................................. 14 5.3.2 Test Setup Diagram .......................................................................................................... 14 5.3.3 Test Procedure .................................................................................................................. 15 5.3.4 Test Data ........................................................................................................................... 15 5.4 FIELD STRENGTH OF FUNDAMENTAL EMISSIONS AND RADIATED EMISSION ........................................ 18 5.4.1 Test Requirement ........................…

Text truncated - open the document above for the full version.

Product Approval Letter 【√□ New Edition Release, □ Version Revision】 【This specification includes a table of contents and has 2 pages】 【RoHS Compliant Parts】 Anfu Honggui Electronics Co., Ltd. Building 2, Yangmeiling New Energy Industrial Park, Zhouhu Town, Anfu County, Ji'an City, Jiangxi Province Peng Jianji: 13907060771 This acknowledgement letter must be signed and returned by the customer within one week of receipt. Failure to do so will be considered as production according to the standards of this acknowledgement letter Execution. 【Customer Approval】 Date: Approval Status: □ Full Approval □ Conditional Approval □ Rejection Approval Explanation: Approval Review Re-inspection Inspection Compilation Review Approval Peng Jianji Customer Name Shenzhen Xinlaishan Technology Co., Ltd. Product Type 43.5*0.6 bare copper coil L=50MM Honggui Part Number 43.5 * 0.6 double slot perforated back white adhesive Customer Part Number Specification Number HG2026031201 Effective Date Product Specifications Customer Name Shenzhen Xinlaishan Technology Co., Ltd. Customer Part Number Honggui Part Number 43.5 * 0.6 slotted perforated back white adhesive Specification number HG2026031201 Version 01 ♦ 、 Dimensions (Unit: mm) A 43.5 ± 0.5 B 39.0 ± 1.5 C 20.5 ±0.5 D 1.6 ±0.2 E 0.6 ±0.1 F 3.0 ±1.0 G 5.3 (1) Wire diameter: 0.08*24P hot air self-adhesive copper wire (2) Number of coils: 10TS (3) Do the starting and ending lines cross? Yes (4) Coil wrapped with 6mm wide high temperature tape (5) The coil and the magnetic sheet need to be pasted in the center (6) 42 round white adhesive on the back of the magnetic sheet Parameters Specifications Test Conditions Test Instrume nts L0 6.5 ±0.3 μH 100KHz/1V ■ TH1816B ■ TH1816B ■ CH-502BC Q >30 min 100KHz/1V DCR <80 mΩ @ 25°C Operating Temperature -40°C~ 125°C ♦ 、 Bill of Materials: Serial Number 1 Product Name Material Specifications Supplier Remar ks 2 Magnetic sheet 43.5*0.6 Slotted with holes PC95 manganese zinc 3 Copper wire 0.08*24P Hot air self-adhesive copper wire 4 High temperat ure tape 6MM Environmentally friendly tape 5 Solder High temperature solder bar Thousand Island environmentally friendly solder 6 Glue White glue Environmentally friendly glue Weaving Adhesive backing Diameter 42 white glue Review Approval Peng Jianji

Product Approval Form 【√□ New Edition Release, □ Version Revision】 【This specification includes a table of contents and has 2 pages】 【RoHS Compliant Parts】 Anfu Honggui Electronics Co., Ltd. This approval form must be signed and returned by the customer within one week of receipt. Failure to do so will be considered as production being carried out according to the standards of this approval form. Execution. 【Customer Approval】 Date: Approval Status: □ Full Approval □ Conditional Approval □ Rejection Approval Explanation: Approval Review Re-inspection Inspection Compilation Review Approval Peng Jianji Customer Name Xinlaishan Technology Co., Ltd. Product Type Apple Magnetic Coil Honggui Part Number 43.5*0.6 Double-groove perforated white adhesive L=50MM Customer Part Number Specification Number HG20250709001 Effective Date Building 2, New Energy Industrial Park, South District, High-tech Industrial Park, Anfu County, Ji'an City, Jiangxi Province Product Specifications Customer Name Xinlaishan Technology Co., Ltd. Customer Part Number Honggui Part Number 43.5*0.6 double slot with hole L=50MM Specification Number HG2025070900 1 Version 01 ♦ 、 Dimensions (unit: mm) A 43.5 ±0.5 B 40.0 ±1.5 C 20.5 ±0.5 D 5.3 E 52.0 ±2 F 50.0 ±2 G 2.0 ±1 H 1.7 ±0.2 I 0.6 ±0.1 J 6.0 (1) Wire diameter: 0.08*24*2P self-adhesive hot air copper wire (2) Number of coils: 10TS (3) Do the starting and ending lines cross? Yes (4) Coil wrapped with 6mm wide high temperature tape (5) The coil and the magnetic sheet need to be pasted in the center (6) Double-sided adhesive tape on the back of the magnetic sheet ♦ 、 Electrical Characteristics: Parameters Specifications Test Conditions Test Instrument s L0 6.5 ±0.3 μH 100KHz/1V ■ TH1816B ■ TH1816B ■ CH-502BC Q >30 min 100KHz/1V DCR <100 mΩ @ 25°C Operating Temperature -40°C~ 125°C ♦ 、 Bill of Materials: Serial Number 1 Product Name Material Specifications Supplier Remar ks 2 Magnetic Sheet 43.5*0.6 Double-groove with hole PC95 manganese zinc 3 Copper wire 0.08*24*2P Hot air self-adhesive copper wire 4 High temperatu re tape 6MM Environmentally friendly tape 5 Solder High temperature solder bar Thousand Island environmentally friendly solder 6 Glue White glue Environmentally friendly glue Weaving White glue Round double- sided tape Review Approval Peng Jianji

产品类型磁吸线圈10圈 编制审核批准 【客户核准】日期: 承认状态： □ 完全承认 □ 条件承认 □ 拒绝承认 批准审核复检检查 Product Approval Letter Specification Number HG2025102902 Effective Date Customer NameShenzhen New Ray Flash Technology Co., Ltd. Product Type Magnetic coil, 10 turns Honggui part number 43.5 * 0.6, double-grooved with holes, white glue on the back, L = 140MM Customer part number 【New release of , version revised】【This specification has a total of 2 pages including the table of contents】【RoHS Compliant Parts】□□ Compiled byReviewApproval Peng Jianji Anfu Honggui Electronics Co., Ltd. Building 2, New Energy Industrial Park, North Area of Yangmeiling, Zhouhu Town, Anfu County, Ji'an City, Jiangxi Province. Peng Jianji 13907060771 Please be sure to sign and return this certificate of approval within one week after the customer receives it. If it is overdue, it will be regarded as implementing according to the standards of this certificate of approval during production. 【Customer Approval】Date: Approved ReviewedRe-inspectedChecked Instructions: E3±1 参数规格测试条件测试仪器 L06.5±0.3μH 100KHz/1V ■TH1816B ■TH1816B ■CH-502BC Q>30min 100KHz/1V DCR<100mΩ @25°C 1 品名材料规格供应商备注 2 磁片43.5*0.6开双槽带孔PC95猛锌 3 铜线0.08*24P热风自粘绞线 4 高温胶带 6MM 环保胶带 5 锡高温锡条千岛 环保 锡 6 胶白胶环保胶水 编制 白胶 圆双面胶 审核 批准 Product Specification Sheet Customer Name Shenzhen Xinleishan Technology Co., Ltd. Customer Part Number Honggui Part Number43.5 * 0.6 Double Groove with Holes, L = 140MMSpecification Number HG2025102902Version 01 I. Dimensions DIMENSION: (mm) A B C D E (2) Number of turns of the winding coil: 10TS (3) Whether the starting and ending wires cross: Yes (6) Double-sided tape on the back circle of the magnetic disc (Unit: mm) 43.5 ±0.5 20.5 ±0.5 39.5 ±1.5 140 ±2 3±1 (1) Wire diameter: 24*2P hot air self-adhesive stranded wire0.08∗ (4) Coil wrapped with 6mm wide high-temperature tape (5) The coil and the magnetic sheet need to be centered and pasted ◆ Electrical characteristics: ParametersSpecificationTest Conditions Test Instruments ■TH1816B ■TH1816B L06.5 ±0.3μH 100KHz/1V Q >30min 100KHz/1V DCR <100mΩ @ 25°C ■CH-502BC Operating temperature -40°C~ 125°C ◆, Bill of materials: Serial number 1 Product nameMaterial specificationSupplier 2 Magnetic disk 43.5*0.6 with double slots and holes 3 Copper wire 0.08*24P 4High-temperature tape 6MM 5Tin High-temperature solder bar 6GlueWhite glue Weaving White glue Round double-sided tape ReviewApproval Peng Jianji