2AML6BB2530Speaker

KINGRAY ELECTRONICS Co., LTD Add: 3F,Building 13th,Xingwei the third Industrial Park,Fenghuang Village,Fuyong town,Baoan District Shenzhen China Date: 2021-8-24 FCC ID: 2AML6BB2530 Dear Sir/Madam, We, KINGRAY ELECTRONICS Co., LTD Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model: Product name: Speaker Model no.: BB2530, KR6969, KR3389 Sincerely, Name/Title： Jason Wang/manager Company: KINGRAY ELECTRONICS Co., LTD Address: 3F,Building 13th,Xingwei the third Industrial Park,Fenghuang Village,Fuyong town,Baoan District Shenzhen China Phone: 86-755-93772715 Fax: 86-755-93772715 E-Mail: [email protected]

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2021-8-24> Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2AML6BB2530 BB2530 For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title： Jason Wang/manager Company: KINGRAY ELECTRONICS Co., LTD Address: 3F,Building 13th,Xingwei the third Industrial Park,Fenghuang Village,Fuyong town,Baoan District Shenzhen China Phone: 86-755-93772715 Fax: 86-755-93772715 E-Mail: [email protected]

KINGRAY ELECTRONICS Co., LTD 3F,Building 13th,Xingwei the third Industrial Park,Fenghuang Village,Fuyong town,Baoan District Shenzhen China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2021-8-24 To whom it may concern: We, KINGRAY ELECTRONICS Co., LTD the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2AML6BB2530 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title： Jason Wang/manager Company: KINGRAY ELECTRONICS Co., LTD Address: 3F,Building 13th,Xingwei the third Industrial Park,Fenghuang Village,Fuyong town,Baoan District Shenzhen China Phone: 86-755-93772715 Fax: 86-755-93772715 E-Mail: [email protected]

FCC ID: 2AML6BB2530 External Photos of the EUT FCC ID: 2AML6BB2530

FCC ID: 2AML6BB2530 Label and Location Size: L: 4.0cm*W: 3.0cm Label and Location Speaker Model No.: BB2530 FCC ID: 2AML6BB2530 Caution : This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC ID: 2AML6BB2530 Internal Photos of the EUT FCC ID: 2AML6BB2530 Bluetooth Antenna

RF Exposure evaluation FCC ID: 2AML6BB2530 1.1. Applicable Standard According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1093 RF exposure requirement KDB447498 v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies 1.2. Requirement According to KDB447498 D01 General RF Exposure Guidance v06 Section 4.3.1 Standalone SAR test exclusion considerations: “Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition, listed below, is satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions.22 The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander (see 5) of section 4.1). To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, typically in the SAR measurement or SAR analysis report, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting is required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for the SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions; for example, handheld PTT two-way radios, handsets, laptops & tablets etc.23 “ [(max. power of channel, including tune-up tolerance, mW)/ (min. test separation distance, mm)] · [√f (GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f (GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. 1.3. Manufacturing tolerance GFSK(Peak) Channel Channel 0 Channel 39 Channel 78 Target (dBm) -3.0 -1.0 -2.0 Tolerance ±(dB) 1.0 1.0 1.0 π/4 DQPSK (Peak) Channel Channel 0 Channel 39 Channel 78 Target (dBm) -2.0 -1.0 -1.0 Tolerance ±(dB) 1.0 1.0 1.0 Page 2 of 2 2. E v a l u a t i o n R e s u l t Evaluation Results Band/Mode f (GHz) Antenna Distance (mm) RF output power (including tune-up tolerance) SAR Test Exclusion Threshold SAR Test Exclusion dBm mW BT 2.450 5 0 1.0 0.3130 <3.0 Yes 3. C o n c l u s i o n The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v06 .....................End of Report.........................

Shenzhen GUOREN Certification Technology Service Co., Ltd. 101#, Building K & Building T, The Second Industrial Zone, Jiazitang Community, Fenghuang Street, Guangming District, Shenzhen, China FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. ..................... : FCC ID. ............................................ : GRCTR210802001-01 2AML6BB2530 Compiled by ( position+printed name+signature) .. : Testing Engineer Jimmy Wang Supervised by ( position+printed name+signature) .. : Project Engineer Kelley Zhang Approved by ( position+printed name+signature) .. : Manager Sam Wang Date of issue ..................................... : Aug. 13, 2021 Testing Laboratory Name ..............: Shenzhen GUOREN Certification Technology Service Co., Ltd. Address ........................................... : 101#, Building K & Building T, The Second Industrial Zone, Jiazitang Community, Fenghuang Street, Guangming District, Shenzhen, China Applicant’s name ............................ : KINGRAY ELECTRONICS Co., LTD Address ............................................ : 3F, Building 13th, Xingwei the third Industrial Park, Fenghuang Village,Fuyong town,Baoan District,Shenzhen,Guangdong,China Test specification ...........................: Standard ........................................... : FCC Part 15.247 Shenzhen GUOREN Certification Technology Service Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen GUOREN Certification Technology Service Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen GUOREN Certification Technology Service Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .....................: Speaker Trade Mark ....................................... : N/A Manufacturer .................................... : KINGRAY ELECTRONICS Co., LTD Model/Type reference....................... : BB2530 Listed Models .................................. : KR6969,KR3389 Modulation ....................................... : GFSK, Π/4DQPSK Frequency .......................................... From 2402MHz to 2480MHz Rating ............................................... : DC 3.70V from battery and DC 5V From External circuit Result................................................ : PASS Report No.: GRCTR210802001-01 Page 2 of 42 T E S T R E P O R T Equipment under Test : Speaker Model /Type : BB2530 Listed Models : KR6969, KR3389 Model Declaration : PCB board, structure and internal of these model(s) are the same, So no additional models were tested. Applicant : KINGRAY ELECTRONICS Co., LTD Address : 3F, Building 13th, Xingwei the third Industrial Park, Fenghuang Village,Fuyong town,Baoan District,Shenzhen,Guangdong,China Manufacturer : KINGRAY ELECTRONICS Co., LTD Address : 3F, Building 13th, Xingwei the third Industrial Park, Fenghuang Village,Fuyong town,Baoan District,Shenzhen,Guangdong,China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: GRCTR210802001-01 Page 3 of 42 Contents 1 T E S T S T A N D A R D S ........................................................................ 4 2 S U M M A R Y ................................................................................... 5 2.1 General Remarks .......................................................................................................................................... 5 2.2 Product Description ..................................................................................................................................... 5 2.3 Short description of the Equipment under Test (EUT) ............................................................................. 5 2.4 EUT operation mode .................................................................................................................................... 5 2.5 Block Diagram of Test Setup ...................................................................................................................... 6 2.6 Related Submittal(s) / Grant (s) ................................................................................................................... 6 2.7 Modifications ................................................................................................................................................ 6 3 T E S T E N V I R O N M E N T .................................................................... 7 3.1 Address of the test laboratory .................................................................................................................... 7 3.2 Test Facility ................................................................................................................................................... 7 3.3 Environmental conditions ........................................................................................................................... 7 3.4 Summary of measurement results ............................................................................................................. 7 3.5 Statement of the measurement uncertainty .............................................................................................. 8 3.6 Equipments Used during the Test .............................................................................................................. 9 4 T E S T C O N D I T I O N S A N D R E S U L T S .................................................. 10 4.1 AC Power Conducted Emission ................................................................................................................ 10 4.2 Radiated Emission ...........................................................…

Text truncated - open the document above for the full version.

FCC ID: 2AML6BB2530 Test Setup Photos of the EUT Test Setup Photo(s) of Radiated Emissions Measurement Fig. 1 Fig. 2 FCC ID: 2AML6BB2530 Test Setup Photo of Line Conducted Emissions Measurement