2AMLF-JC1814G Dashcam Lite

JC181 Series Please read this guide carefully before use. Because the product performance may improve over time, this guide is subject to change without notice. 4G Dashcam Lite Quick Start Guide V1.0 1 01/Overview of Product Appearance 1.1. Appearance Description 1.2. Description of Work Indicators Memory card / SIM card slot Front camera (main) SOS Key Fastener screw Sub camera Status indicator light (red, green, blue) Mount base Power supply port Microphone Heat sink Speaker Upgrade/reset button Item Item Function Function Red O ⭘⭘⭘⭘ ⭘ The d evice i s s hut down or i n s leep mode. Solid on      The d evice i s in t he ACC on s ta te and records v ideo n ormally. Flash  ⭘⭘  The d evice i s in t he ACC ON sta te but an excepti on o ccurs i n the v ideo r ecording functi on. Green O ⭘⭘⭘⭘ ⭘ The d evice i s s hut down or i n s leep mode. Solid on      The d evice i s in t he ACC ON sta te and has successfu lly g ot i ts  rst x. Flash  ⭘⭘  The d evice i s in t he ACC ON sta te and is positi oning . Blue O ⭘⭘⭘⭘ ⭘ The d evice i s s hut down or i n s leep mode. Solid on      The d evice i s in t he ACC ON sta te and has normal n etwork a ccess. Flash  ⭘⭘  The d evice i s in t he ACC ON sta te and fa ils to access the n etwork. 2 2.2. Optional accessories 2.3. Selection of accessories Item 1 2 3 Power cable (for cigarette lighter socket) It is used by the device to get power from the car cigarette lighter socket. Power cable (for OBD port) It is used by the device to get power from the car OBD port. It can be mounted remotely to monitor places of your concern. Peripheral camera 02/Packaging List 2.1. Standard conguration Memory card 1. The device supports one Micro SD card; 2. The card must be in FAT32 format with a capacity of 16GB to 128GB; 3. The card must be rated Class 10 or higher, or perform A1 or higher; 4. It is recommended to use a memory card from the original manufacturer of your device to ensure optimal compatibility and stability; 5. Insert the card by the direction shown in the gure to protect the card against damage; 6. Press the card inward to remove it. If you are removing the card in your car, use moderate force to ensure that the card is not ejected out to an inaccessible location; 7. Make sure the SIM card is not inserted into the memory card slot; 8. Memory cards are consumables, which means they have a tested lifespan. It is recom mended that you test the card quarterly to ensure that it is reading and writing normally, and replace it periodically to protect your video les from loss; 9. It is recommended to use industrial grade memory cards if the device is used for a long period of time every day to avoid video recording exceptions caused by hot weather. The JC181 series requires a SIM card and a memory card to function its best. You can purchase the two accessories according to your specic needs, but the following requirements must be met: NameUsage Item 1 2 3 JC181 unit Mount base x 1 x 1 x 1 x 1 x 1 x 3 Card slot protective cover 4 Power cable 5 T6 torx screwdriver 6 M2 screws NameQty 3 03/Product Functions 3.1 Product features JC181 series is a compact 4G dashcam. It has two cameras that simultaneously monitor the road ahead and the cabin. It uses the 4G network to communicate with the backend, pinpoints locations using GPS and BDS signals, and detects movements of the vehicle using the G-sensor. It can be widely used in light vehicle eets and private cars, enabling remote management of both vehicles and drivers to save time and improve eciency. Video recording The two cameras can simultaneously record video of the road and the driver. The device supports loop recording and stores video in segments. It also supports video playback via the web browser or the mobile app. Tracking The device is equipped with a GNSS module that determines positions using both GPS and BDS signals. It is able to acquire positions when the vehicle is moving and upload the data to the cloud server in real time. It also supports the playback and retrieval of trip history. 4G communication The built-in 4G LTE module can access the network at CAT.1 speed, ensuring smooth video transmission. Remote management The device can connect to the cloud server over the wireless data network, enabling remote control of the device, such as location tracking and live video viewing. Driving behavior monitoring The device can detect reckless driving behaviors such as collisions, hard braking, hard acceleration, sharp cornering, and speeding, and report such behaviors to the platform. Exception alerts When the device detects exceptions in the vehicle, it noties the platform, records the location, and captures video clips related to the exception. The device then uploads these data to the cloud server for storage and future reference. SIM card 1. A Nano SIM card is required (refer to the following gure for card size); 2. Use the supplied card tray for the SIM card installation; 3. Attach or detach the SIM card (make sure the device is in the ACC OFF state) by the steps shown in Figure 2; 4. Make sure the SIM card is subscribed to a cellular data service; 5. Use the supplied ejector pin to remove the card tray and the SIM card; 6. It is recommended to use ceramic SIM cards if the device is used for a long period of time every day to avoid card deformation and communication failures caused by high temperature. 4 3.3. Product performance 04/Product Installation Conguration Operating voltage Operating temperature Storage temperature ESD protection DC9-33V –20 ̊C to 70 ̊C –30 ̊C to 85 ̊C Air ±8KV; contact ±4KV Undervoltage protection Overvoltage protection Reverse connection protection Flame retardant 9V 36V Support UL94 V-0 ParameterPerformanceParameter 4.1 Notices This device is for use with gasoline-powered vehicles only. Please do not use it with all-electric or hybrid vehicles; Use the supplied accessories for the installation; The power supply for the device is DC9-33V. Pl…

Text truncated - open the document above for the full version.

UNITED STATES DESIGNATED AGENT LETTER TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant Company Name: Grantee Code: Contact Name: Add「ess: Telephone: Email: Shenzhen Jimi foT Co., Ltd. 2AMLF Yi Xie 3-4/F, Block A, Building# 7, Shenzhen International Innovation Vaffe y , Dashi 1st Road,Nanshan District Shenzhen China +86-0755-29121290 xie y [email protected] Applicable Equipment: FCC ID:2AMLF-JC181 Contains FCC ID:2AMLF-XQ200U-LA ATTN: Director of Certification: Date: 2023/12/06 U.S. designated agent Company Name: United Consulting Technolog y Services Co., Ltd. FRN: 0033495714 Contact Name: David Wu Address: 17800 CASTLETON ST STE 665 CITY OF INDUSTRY CA 917 48 United States Telephone: Email: (626)217-4022 [email protected] We,< Shenzhen Jimi loT Co., Ltd. > and< United Consulting Technolog y Services Co., Ltd. > understand and acknowledge the applicants consent and the designated agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S address and e-mail of the designated agent listed above. We,< Shenzhen Jimi /oT Co., Ltd. > and< United Consulting Technolog y Services Co., Ltd.> acknowledge the applicant's acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant Name (Printed): Yi Xie Title: S y stem e 11J] ine e,; , Sl gnatur e ` ` U.S. designated agent Name (Printed): David Wu Title: CEO Signature:

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 1 of 5 External Photos for SZCR2311003883AT FCC ID: 2AMLF-JC181 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 2 of 5 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 5 of 5 - End of the Appendix -

FCC ID:2AMLF-JC181 Contains FCC ID:2AMLF-XQ200U-LA

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 1 of 8 Internal Photos for SZCR2311003883AT FCC ID: 2AMLF-JC181 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 2 of 8 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 3 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 4 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 5 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 6 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 7 of 8 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 8 of 8 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR231100388303 Page: 1 of 12 Keny Xu EMC Laboratory Manager RF EXPOSURE EVALUATION REPORT Application No.: SZCR2311003883AT Applicant: Shenzhen Jimi IoT Co., Ltd. Address of Applicant: 3-4/F, Block A, Building#7, Shenzhen International Innovation Valley, Dashi 1st Road, Nanshan District ShenZhen China Manufacturer: Shenzhen Jimi IoT Co., Ltd. Address of Manufacturer: 3-4/F, Block A, Building#7, Shenzhen International Innovation Valley, Dashi 1st Road, Nanshan District ShenZhen China Factory: Huizhou Newthinking Electronics Co., Ltd. Address of Factory: The third&sixth floor, 1&2 Factory Buildings, Jimi Industrial Park, No.101 Jinfu Road, Xiaojinkou street, Huicheng District, Huizhou Equipment Under Test (EUT): EUT Name: 4G Dashcam Lite Model No.: JC181, JC181S, JC181-LA, JC181S-LA, R41, R41S, R41-LA, R41S-LA   Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: Jimi loT FCC ID: 2AMLF-JC181 Standard(s) : FCC Rules 47 CFR §2.1091 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2023-11-29 Date of Test: 2024-01-11 to 2024-01-21 Date of Issue: 2024-01-24 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR231100388303 Page: 2 of 12 Revision Record Version Chapter Date Modifier Remark 01 2024-01-24 Original Authorized for issue by: Darren Yuan/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR231100388303 Page: 3 of 12 2 Contents Page 1 Cover Page ......................................................................................................................................... 1 2 Contents ............................................................................................................................................. 3 3 General Information............................................................................................................................ 4 3.1 General Description of E.U.T. ....................................................................................................... 4 3.2 Separation Distance ..................................................................................................................... 5 3.3 Test Location ............................................................................................................................... 6 3.4 Test Facility .................................................................................................................................. 6 3.5 Deviation from Standards ............................................................................................................. 6 3.6 Abnormalities from Standard Conditions ....................................................................................... 6 4 FCC Radiofrequency radiation exposure limits ................................................................................ 7 4.1 Blanket 1 mW Blanket Exemption ................................................................................................. 7 4.2 MPE-based Exemption ................................................................................................................. 7 4.3 SAR-based Exemption ................................................................................................................. 8 5 Measurement and Calculation ..........................................................................................................12 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR231100388303 Page: 4 of 12 3 General Information 3.1 General Description of E.U.T. Power supply: Input: 9-33VDC 2.4G Wi-Fi Operation Frequency: 802.11b: 2412MHz to 2462MHz Modulation Type: 802.11b: DSSS (CCK, DQPSK, DBPSK) Number of Channels: 802.11b:11 Channel Spacing: 5MHz Antenna Type: PIFA Antenna Antenna Gain: 1.51dBi LTE module has got certified, FCC ID is 2AMLF-XQ200U-LA GSM Operation Frequency Band: GSM850/PCS1900 Modulation Type: GMSK for GPRS Antenna Type: PIFA Antenna Antenna Gain: GSM850: 6.0dBi; PCS1900: 3.0dBi LTE LTE Operation Frequency Band: LTE FDD Band 2,4,5,7 Modulation Type: QPSK, 16QAM Antenna Type: PIFA Antenna Antenna Gain: LTE B2: 3.0dBi; B4: 6.0dBi; B5: 6.0dBi; B7: 6.0dBi Declaration of EUT Family Grouping: Model No.: JC181, JC181S, JC181-LA, JC181S-LA, R41, R41S, R41-LA, R41S-LA Only the model JC181 was tested, since according to the declaration from the applicant, the electrical circuit design, PCB layout, components used and internal wiring and functions were identical for the above models, with only difference on model No.. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR231100388303 Page: 5 of 12 3.2 Separation Distance Minimum test separation distance: 20cm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR231100388303 Page: 6 of 12 3.3 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 3.4 Test Facility The test facility is recognized, certified, or accredited by the follo…

Text truncated - open the document above for the full version.

1 Antenna Specification • Manufacturer：Shenzhen PIPA antenna design Co.,LTD. Address of manufacturer：ZUnit F/4F, buildingA，Junxiangda，Plada， Zhongshanyuan Road，Nanshan District，Shenzhen 2.1 Basic Specifications No. Specification Descriptions Notes 1 Antenna model C181 WIFI 2 Antenna type PIFA 3 Operation Frequency 2.4-2.483GHz 4 Impedance 50ohm 5 Gain [email protected]~2.483GHz 6 Efficiency ≥30% 7 VSWR ≤2.5 1.2 radiation pattern Frequency/Mhz Efficiency / % MaxGain/dBi 2410 35.48 1.16 2420 34.91 0.99 2430 38.37 1.46 2440 38.46 1.23 2450 40.18 1.16 2460 43.05 1.19 2470 44.87 1.51 2480 40.83 1.12 2490 38.82 0.72 Technical Specification WIFI: 2470Mhz 1.3 Antenna Size WIFI: 26.99*21.47*0.12mm PIFA

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR231100388302 Page: 1 of 62 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2311003883AT Applicant: Shenzhen Jimi IoT Co., Ltd. Address of Applicant: 3-4/F, Block A, Building#7, Shenzhen International Innovation Valley, Dashi 1st Road, Nanshan District ShenZhen China Manufacturer: Shenzhen Jimi IoT Co., Ltd. Address of Manufacturer: 3-4/F, Block A, Building#7, Shenzhen International Innovation Valley, Dashi 1st Road, Nanshan District ShenZhen China Factory: Huizhou Newthinking Electronics Co., Ltd. Address of Factory: The third&sixth floor, 1&2 Factory Buildings, Jimi Industrial Park, No.101 Jinfu Road, Xiaojinkou street, Huicheng District, Huizhou Equipment Under Test (EUT): EUT Name: 4G Dashcam Lite Model No.: JC181, JC181S, JC181-EU, JC181S-EU, R41, R41S, R41-EU, R41S-EU   Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: Jimi loT FCC ID: 2AMLF-JC181 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2023-11-29 Date of Test: 2024-01-11 to 2024-01-21 Date of Issue: 2024-01-24 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR231100388302 Page: 2 of 62 Revision Record Version Chapter Date Modifier Remark 01 2024-01-24 Original Authorized for issue by: Darren Yuan/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR231100388302 Page: 3 of 62 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.9.2 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Declaration of EUT Family Grouping: Model No.: JC181, JC181S, JC181-EU, JC181S-EU, R41, R41S, R41-EU, R41S-EU Only the model JC181 was tested, since according to the declaration from the applicant, the electrical circuit design, PCB layout, components used and internal wiring and functions were identical for the above models, with only difference on model No.. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR231100388302 Page: 4 of 62 3 Contents Page 1 Cover Page ......................................................................................................................................... 1 2 Test Summary ..................................................................................................................................... 3 3 Contents ............................................................................................................................................. 4 4 General Information............................................................................................................................ 6 4.1 Details of E.U.T. ........................................................................................................................... 6 4.2 Description of Support Units ......................................................................................................... 6 4.3 Measurement Uncertainty ............................................................................................................ 6 4.4 Test Location ............................................................................................................................... 7 4.5 Test Facility .................................................................................................................................. 7 4.6 Deviation from Standards ............................................................................................................. 7 4.7 Abnormalities from Standard Conditions ....................................................................................... 7 5 Equipment List ................................................................................................................................... 8 6 Radio Spectrum Technical Requirement ..........................................................................................11 6.1 Antenna Requirement .................................................................................................................11 6.1.1 Test Requirement: ..................................................................................................................11 6.1.2 Conclusion ..............................................................................................................................11 7 Radio Spectrum Matter Test Results ................................................................................................12 7.1 Conducted Peak Output Power ...........................................................................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 1 of 3 Setup Photos for SZCR2311003883AT FCC ID: 2AMLF-JC181 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 2 of 3 Test Setup Photo Radiated Emissions (30MHz-1GHz) Radiated Spurious Emissions Above 1GHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 3 of 3 Radiated Emissions which fall in the restricted bands - End of the Appendix -