2AMLF-VL501LTE Vehicle Terminal

VL501 LTE Vehicle Terminal Version: V1.0 User Manual Read this manual carefully prior to use. No prior notice will be given for any changes made to the appearance color, or accessories of the product. CONTENTS Introduction 1.1 Features 1.2 Operating Environment 1.3 Frequency Bands 01 Packing List 03 verview 2.1 Appearance 2.2 2.2 LED Indication 4.1 SIM Card Attachment 4.2 Device Installation 02 1 Installation 04 Configuring APN and Server Parameters Common SMS setting command Platform Operations 05 06 07 2 01. Introduction 1.1 Features • Driving Behavior Analysis (Harsh Acceleration, Hard Braking,Sharp Cornering, and collision) • Remote Listen-in (NA only) • Multi-GNSS • Exception Alerts (on Speed, Fatigue Driving, Entering or Leaving Geofences, and Device Plug-in and Unplug) •• Reupload of Location Data • Panic Button for Emergencies • Fast Charging 1.2 Operating Environment Weight Operating voltage Dimensions Internal backup battery Operating temperature Storage temperature Operating humidity Positioning accuracy Location modes Sensitivity Operating current 60g 9-36V DC 70.0mmx52.0mmx82.5mm 50mAH/3.7V LiCoO2 battery 5%–95% (non-condensing) <2.5m CEP (Open Sky) GPS/GLONASS/BDS/AGPS/QZSS Cold start≤30sec Hot start≤1sec Typical≤15mA @ 12V (deep sleep) Typical≤120mA @ 12V (active tracking) 1.3 Frequency Bands VL501(N) LTE-FDD CAT-1: B2/B4/B5/B12/B13 WCDMA: B2/B4/B5 LTE-FDD CAT-M1/NB2: B1/B3/B8/B18/B19/B26 VL501( J ) 3 02. Overview 2.1 Appearance 2.2 LED Indication PWR LED Power LED SOS SIM card holder Notch USB-A Cooling holes Negative Positive Type-C Red Meaning Solid onThe power is connected and the device can work properly. No power is connected or the device is faulty. Off 4 03. Packing List 04. Installation Item MeaningMeaning DevicePCS PCS 1 Note: Do not shake or rotate the VL501 at will, as it may falsely trigger reckless driving behavior and other alerts. Find the cigar lighter socket of your vehicle and insert the VL501 into the port. The positions of cigar lighter sockets of different makes may different. It is recommended to visit the official website of your make and find out where the cigar lighter port of your vehicle is. • Remove the cover using the notch and insert the SIM by the figure. • Place the SIM in by the figure.Slide up the card holder to lock the SIM. Step 2 Attach the SIM. Step 1 Prepare a Nano-SIM. 3.1 SIM Card Attachment 1 User Manual Nano Nano 标准卡Micro Note: ① After the SIM is in place, the device will power on using its backup battery. If the backup battery is too low, the power-on will fail. In this case, it is recommended to plug the device into the cigar lighter of your vehicle. ② The SIM card must be inserted correctly, have GPRS services activated, and not be in arrears. If the SIM is identified and requires a PIN, please disable the PIN request. 3.2 Device Installation 5 To ensure the device gets online and operates correctly, you are advised to check the APN and server settings. You can set the APN and the server via SMS commands if necessarily. CommandDescriptionRemark VERSION# PARAM# GPRSSET# STATUS# WHERE# URL# POSITION# MONITOR# FACTORY# RESET# Check firmware version Check parameters Query device network setting Check device’s status SOS setting Check position status Check URL Check position Voice Monitor(NA only) Restore to factory Restore to factory setting The device would reboot in 20S after receiving the command Reboot SOS,A,phone number 1, phone number 2,phone number 3# SOS,D,sequence number 1, sequence number 2, sequence number 3# SOS,D,phone number#SOS,D,phone number# SOS# / / / / / / / / Add SOS phone number Delete the phone number according to the sequence number Delete the matching SOS phone number Check the SOS phone number SERVER,mode,domain name/IP,port,protocol# For example: SERVER,1,www.ydpat.com,8011,0# SERVER,0,211.154.135.113,8011,0# "Mode=1" means to set the server parameters via the domain name; "Mode=0" means to set the server parameters via the IP address. "Protocol=0" means to connect to the server using TCP protocol;"Protocol=0" means to connect to the server using TCP protocol; "Protocol=1" means to connect to the server using UDP protocol. APN,apnname,user,password# For example: APN,internet,CLENTE,AMENA# APN,apnname# For example: APN,internet# Or if your local APN contains a user name and password, you can use the following command to set the APN: Server set command It is recommended to contact your platform service provide to confirm the domain name and IP address of their serve. Then you can use your phone to deliver the following command to the VL501: APN set command It is recommended to contact your network operator to confirm the APN information. Then you can use your phone to deliver the following SMS command to the VL501: 05.Configuring APN and Server Parameters 06.Common SMS setting command 6 By logging in to the mobile app or locations services platform designated by your dealer and correctly your device, you can query and set related parameters. Logging In to Service Platform Log in to the location services platform designated by your dealer and configure accordingly. Downloading Mobile App Log in to the URL designated by your dealer to download the mobile app. 07. Platform Operations Maintenance Record 1. The warranty is valid only when the warranty card is properly completed, and upon presentation of the proof of purchase consisting of original invoice indicating the date of purchase, model and serial NO. of the product. We reserve the right to refuse warranty if this information has been removed or changed after the original purchase of the product form the dealer. 2. Our obligations are limited to repair of the defect or replacement the defective part or at its discretion replacement of the product itself. at its discretion replacement of the product itself. 3. Warranty repairs must be carried out by our Authorized Service Centre. Warranty cover will be void, even if a repair has been attempted by any unaut…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 1 of 5 External Photos for FYCR2204000057AT FCC ID: 2AMLF-VL501 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 2 of 5 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 3 of 5 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 4 of 5 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 5 of 5

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 1 of 12 Internal Photos for FYCR2204000057AT FCC ID: 2AMLF-VL501 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 2 of 12 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 3 of 12 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 4 of 12 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 5 of 12 Antenna Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 6 of 12 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 7 of 12 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 8 of 12 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 9 of 12 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 10 of 12 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 11 of 12 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Page: 12 of 12

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR220400005703 Page: 1 of 10 Kidd Yang EMC Laboratory Manager 1 Cover Page RF Exposure Report Application No.: FYCR2204000057AT Applicant: Shenzhen Jimi IoT Co., Ltd. Address of Applicant: 3-4/F, Block A, Building #7, Shenzhen International Innovation Valley, Dashi 1st Road, Nanshan District, Shenzhen, Guangdong, China Manufacturer: Shenzhen Jimi IoT Co., Ltd. Address of Manufacturer: 3-4/F, Block A, Building #7, Shenzhen International Innovation Valley, Dashi 1st Road, Nanshan District, Shenzhen, Guangdong, China Factory: Huizhou Newthinking Electronics Co., Ltd. Address of Factory: 6/F of [1] and [2] Plants in Jimi Industrial Park, No. 101 Jinfu Road, Xiaojinkou street, Huicheng District, Huizhou City, China Equipment Under Test (EUT): EUT Name: LTE Vehicle Terminal Model No.: VL501 FCC ID: 2AMLF-VL501 Trade Mark: JIMI Standard(s) : FCC Rules 47 CFR §2.1091 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2022-04-06 Date of Test: 2022-04-19 to 2022-05-12 Date of Issue: 2022-05-25 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR220400005703 Page: 2 of 10 Revision Record Version Chapter Date Modifier Remark 01 2022-05-25 Original Authorized for issue by: Tree Zhan/Project Engineer Winkey Wang/Reviewer Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR220400005703 Page: 3 of 10 2 Contents Page 1 COVER PAGE .................................................................................................................................... 1 2 CONTENTS ........................................................................................................................................ 3 3 GENERAL INFORMATION ................................................................................................................ 4 3.1 GENERAL DESCRIPTION OF E.U.T. ................................................................................................ 4 3.2 DETAILS OF E.U.T. ....................................................................................................................... 4 3.3 SEPARATION DISTANCE ................................................................................................................ 4 3.4 TEST LOCATION ............................................................................................................................ 5 3.5 TEST FACILITY .............................................................................................................................. 5 4 FCC RADIOFREQUENCY RADIATION EXPOSURE LIMITS .......................................................... 6 4.1 BLANKET 1 MW BLANKET EXEMPTION ........................................................................................... 6 4.2 MPE-BASED EXEMPTION .............................................................................................................. 6 4.3 SAR-BASED EXEMPTION ............................................................................................................... 7 5 MEASUREMENT AND CALCULATION .......................................................................................... 10 5.1 MAXIMUM TRANSMIT POWER ....................................................................................................... 10 5.2 RF EXPOSURE CALCULATION ...................................................................................................... 10 Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR220400005703 Page: 4 of 10 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power supply: Input: DC9-36V Rated current:65mA Output A: DC5V Output Type-C: DC5V Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V4.0 LE Modulation Type: GFSK Data Rate: 1Mbps Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: FPC Antenna Gain: 2dBi 3.3 Separation Distance Minimum test separation distance: 5mm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR220400005703 Page: 5 of 10 3.4 Test Location All tests were performed at: Compliance Certification Services（Kunshan）Inc. Shenzhen branch. Fuyong lab. Xinlong TechnoPark,Fengtang Road, Fuyong Subdistrict, Bao’an, Shenzhen, China Tel: +86 755 8866 3988 Fax: +86 755 2671 0594 No tests were sub-contracted. 3.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 6606.01) Compliance Certification Services（Kunshan）Inc. Shenzhen branch is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 6606.01. • FCC –Designation Number: CN1322 Compliance Certification Services（Kunshan）Inc. Shenzhen branch has been recognized as an accredited testing laboratory. Designation Number: CN1322. Test Firm Registration Number: 718073 • Innovation, Science and Economic Development Canada Compliance Certification Services（Kunshan）Inc. Shenzhen branch has been recognized by ISED as an accredited testing laboratory. CAB identifier: CN0129. IC#: 28189. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR220400005703 Page: 6 of 10 4 FCC Radiofrequency radiation exposure limits Test exemptions apply for devices used in general population/uncontrolled exposure environments, according to the SAR-based, or MPE-based exemption thresholds. 4.1 Blanket 1 mW Blanket Exemption The 1 mW Bl…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR220400005702 Page: 1 of 56 Kidd Yang EMC Laboratory Manager TEST REPORT Application No.: FYCR2204000057AT Applicant: Shenzhen Jimi IoT Co., Ltd. Address of Applicant: 3-4/F, Block A, Building #7, Shenzhen International Innovation Valley, Dashi 1st Road, Nanshan District, Shenzhen, Guangdong, China Manufacturer: Shenzhen Jimi IoT Co., Ltd. Address of Manufacturer: 3-4/F, Block A, Building #7, Shenzhen International Innovation Valley, Dashi 1st Road, Nanshan District, Shenzhen, Guangdong, China Factory: Huizhou Newthinking Electronics Co., Ltd. Address of Factory: 6/F of [1] and [2] Plants in Jimi Industrial Park, No. 101 Jinfu Road, Xiaojinkou street, Huicheng District, Huizhou City, China Equipment Under Test (EUT): EUT Name: LTE Vehicle Terminal Model No.: VL501 FCC ID: 2AMLF-VL501 Trade Mark: JIMI Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2022-04-06 Date of Test: 2022-04-19 to 2022-05-12 Date of Issue: 2022-05-25 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR220400005702 Page: 2 of 56 Revision Record Version Chapter Date Modifier Remark 01 2022-05-25 Original Authorized for issue by: Tree Zhan /Project Engineer Winkey Wang/Reviewer Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR220400005702 Page: 3 of 56 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Compliance Certification Services (Kunshan) Inc. Shenzhen Branch Report No.: FYCR220400005702 Page: 4 of 56 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 TEST SUMMARY ....................................................................................................................................... 3 3 CONTENTS ................................................................................................................................................ 4 4 GENERAL INFORMATION ........................................................................................................................ 6 4.1 DETAILS OF E.U.T. ............................................................................................................................... 6 4.2 DESCRIPTION OF SUPPORT UNITS ......................................................................................................... 6 4.3 MEASUREMENT UNCERTAINTY .............................................................................................................. 6 4.4 TEST LOCATION .................................................................................................................................... 7 4.5 TEST FACILITY ...................................................................................................................................... 7 4.6 DEVIATION FROM STANDARDS ............................................................................................................... 7 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ..................................................................................... 7 5 EQUIPMENT LIST ...................................................................................................................................... 8 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................... 13 6.1 ANTENNA REQUIREMENT .................................................................................................................... 13 6.1.1 Test Requirement: ....................................................................................................................... 13 6.1.2 Conclusion ................................................................................................................................... 13 7 RADIO SPECTRUM MATTER TEST RESULTS ..................................................................................... 14 7.1 CONDUCTED PEAK OUTPUT POWER .................................................................................................... 14 7.1.1 E.U.T. Operation .......................................................................................................................... 14 7.1.2 Test Mode Description ................................................................................................................. 14 7.1.3 Test Setup Diagram ..................................................................................................................... 14 7.1.4 Measurement Procedure and Data............................................................................................. 14 7…

Text truncated - open the document above for the full version.

Appendix Photographs of Test Setup for FYCR2204000057AT FCC ID: 2AMLF-VL501 Test Setup Photos Radiated Emissions which fall in the restricted bands Radiated Spurious Emissions Below 1GHz Radiated Spurious Emissions Above 1GHz