2AMLF-VL802Vehicle Terminal

Specification Frequency GNSSType SensitMty VL.802: LTE·FDD: Bl/B2/B3/B4/B5/B7/B8/ B '2B GSM: 850 /900/1800/1900MHz MTKall-l n－。ne multi-GNSS SOC Cold st.a民：<32s Hot start: <ls Position Aαuracy(CEP皿1)Autonomous: <!Om Dimensions 106mm xS6.8mm x 22mm Weight 1 04g Backup B监恒ry Li-Polymer, 1000 mAh Operating Voltage 9Vto36V DC -30"C to + 70"C Ope『atinglemperature -30"Ct。咱S"Cforsto阳ge Transmit Pro怡。l TCP FCC Warnings: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help - This device and its antenna(s) must not be co- located or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Shenzhen Jiini IoT Co. , Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 US A Date : Februar y 6th 2023 Ref: Attestation Statements Part 2.911(d)(S)(i) F iling FCC ID: 2AMLF-VL802 Shenzhen Jimi loT Co., Ltd. certifies that the equipment for which authorization is s ought单旦旦！ "covered ” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerel y , �：�：�了�：：t飞 μ Rev 1/26/2023

Shenzhen Jimi loT Co., Ltd. Federal Communications Commission Au thorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: February 6th 2023 Ref: Attestation Statements Pa同2.911(d)(S)(ii) Fil ing FC C ID : 2AMLF-VL802 S henzhen Jimi loT Co., Ltd. certifies that, as of the date of the filing of the application, the applicant单旦旦E identified on the Covered List a s an entity producing "covered ” equipment. Sincerely, (Applicant signature) (Kathy Luo) V泸jl周 Rev 1/26/2023

Shenzhen Jimi IoT Co., Ltd. 3-4/F, Block A, Building #7, Shenzhen International Innovation Valley, Dashi 1st Road, Nanshan District, Shenzhen, Guangdong, China Shenzhen, Guangdong，518000 China Date: March 7, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AMLF-VL802 US Agent – Attestation Statement / Part 2.911(d)(7) Shenzhen Jimi IoT Co., Ltd. certifies, that as of March 7, 2023, we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2AMLF-VL802 Shenzhen Jimi IoT Co., Ltd., accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission- related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of Shenzhen Jimi IoT Co., Ltd. for FCC ID: 2AMLF-VL802 Designated Agent Information: Company Name: FCC US Agent, LLC Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA FRN: 0033402884 Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company: Shenzhen Jimi IoT Co., Ltd. Designated Agent: FCC US Agent, LLC Company Representative: Kathy Luo Designated Agent Representative: Tim Payne Signature: Signature:

Shenzhen Jimi IoT Co., Ltd. Agent Authorization Company: Shenzhen Jimi IoT Co., Ltd. Address: 3-4/F, Block A, Building#7, Shenzhen International, Innovation Valley, Dashi 1st Road, Nanshan District, Shenzhen, China Product Name: Vehicle Terminal Model Number(s): VL802 Product Description: Vehicle Terminal We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2023/1/9 Name: Kathy Luo Title: System engineer Company: Shenzhen Jimi IoT Co., Ltd.

Report No.: BL-SZ2270642-AW 1 / 6 EUT EXTERNAL PHOTOS FRONT VIEW OF EUT REAR VIEW OF EUT Report No.: BL-SZ2270642-AW 2 / 6 LEFT SIDE VIEW OF EUT RIGHT SIDE OF EUT Report No.: BL-SZ2270642-AW 3 / 6 TOP VIEW OF EUT BOTTOM VIEW OF EUT Report No.: BL-SZ2270642-AW 4 / 6 Accessory-I/O cable Report No.: BL-SZ2270642-AW 5 / 6 Accessory-Relay cable Accessory-SOS button cable Report No.: BL-SZ2270642-AW 6 / 6 Accessory-Relay(12V/24V) Accessory-Power cable

Report No.: BL-SZ2270642-AI 1 / 5 EUT INTERNAL PHOTOS EUT UNCOVER VIEW EUT UNCOVER VIEW Report No.: BL-SZ2270642-AI 2 / 5 EUT UNCOVER VIEW EUT UNCOVER VIEW RF FPC Antenna BT PCB Antenna Report No.: BL-SZ2270642-AI 3 / 5 MAIN BOARD TOP VIEW (WITH SHIELDING) MAIN BOARD REAR VIEW (WITH SHIELDING) b Report No.: BL-SZ2270642-AI 4 / 5 MAIN BOARD TOP VIEW (WITHOUT SHIELDING) c MAIN BOARD REAR VIEW (WITHOUT SHIELDING) b Report No.: BL-SZ2270642-AI 5 / 5 Battery 1 Photo (TOP) Battery Photo 1 (REAR)

Report No.: BL-SZ2270642-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 11 Web: www.titcgroup.com Template No.: TRP-FCC-Mobile (2022-08-15) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: Shenzhen Jimi IoT Co., Ltd. Address: 3-4/F, Block A, Building #7, Shenzhen International Innovation Valley, Dashi 1st Road, Nanshan District, Shenzhen, Guangdong, China Equipment Type: Vehicle Terminal Model Name: VL802 Brand Name: JIMI FCC ID: 2AMLF-VL802 Test Standard: 47 CFR Part 2.1091 KDB 447498 D04 v01 Sample Arrival Date： Jul. 29, 2022 Test Date： Jul. 29, 2022 – Nov. 30, 2022 Date of Issue: Jan. 04, 2023 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Xu Rui Checked by: Liyao Zong Approved by: Wei Yanquan (Chief Engineer) _______________ _______________ _______________ Report No.: BL-SZ2270642-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 11 Web: www.titcgroup.com Template No.: TRP-FCC-Mobile (2022-08-15) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Content Rev. 01 Jan. 04, 2023 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ......................................................................................................... 3 1.1 Test Laboratory .............................................................................................................. 3 1.2 Test Location .................................................................................................................. 3 2 PRODUCT INFORMATION ......................................................................................................... 4 2.1 Applicant Information ...................................................................................................... 4 2.2 Manufacturer Information ............................................................................................... 4 2.3 Factory Information ........................................................................................................ 4 2.4 General Description for Equipment under Test (EUT) ................................................... 4 2.5 Ancillary Equipment ........................................................................................................ 4 2.6 Technical Information ..................................................................................................... 5 3 SUMMARY OF TEST RESULT ................................................................................................... 6 3.1 Test Standards ............................................................................................................... 6 4 DEVICE CATEGORY AND LEVELS LIMITS .............................................................................. 7 5 ASSESSMENT RESULT ............................................................................................................. 9 5.1 Output Power ................................................................................................................. 9 5.2 Tune-up power ............................................................................................................. 10 5.3 RF Exposure Evaluation Result ................................................................................... 10 5.4 Conclusion .................................................................................................................... 10 Report No.: BL-SZ2270642-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 11 Web: www.titcgroup.com Template No.: TRP-FCC-Mobile (2022-08-15) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1 GENERAL INFORMATION 1.1 Test Laboratory Name Shenzhen BALUN Technology Co., Ltd. Address Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Phone Number +86 755 6685 0100 1.2 Test Location Name Shenzhen BALUN Technology Co., Ltd. Location Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1/F, Building B, Ganghongji High-tech Intelligent Industrial Park, No. 1008, Songbai Road, Yangguang Community, Xili Sub-district, Nanshan District, Shenzhen, Guangdong Province, P. R. China Accreditation Certificate The laboratory is a testing organization accredited by FCC as a accredited testing laboratory. The designation number is CN1196. Report No.: BL-SZ2270642-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 4 / 11 Web: www.titcgroup.com Template No.: TRP-FCC-Mobile (2022-08-15) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 2 PRODUCT INFORMATION 2.1 Applicant Information Applicant Shenzhen Jimi IoT Co., Ltd. Address 3-4/F, Block A, Building #7, Shenzhen International Innovation Valley, Dashi 1st Road, Nanshan District, Shenzhen, Guangdong, China 2.2 Manufacturer Information Manufacturer Shenzhen Jimi IoT Co., Ltd. Address 3-4/F, Block A, Building #7, Shenzhen International Innovation Valley, Dashi 1st Road, Nanshan District, Shenzhen, Guangdong, China 2.3 Factory Information Factory N/A Address N/A 2.4 General Description for Equipment under Test (EUT) EUT Name Vehicle Terminal Model Name Under Test VL802 Series Model Name N/A Description of Model name differentiation N/A Hardware Version VL802_MB_V1.1 Software Version VL802_FACTORY_ASR_LA_220613.1048 Dimensions (Approx.) N/A Weight (Approx.) N/A 2.5 Ancillary Equipment Ancillary Equipment 1 Battery Brand Name N/A Model No. PL703542 Serial No. N/A Capacity 1000 mAh Rated Voltage 3.70 V Limit Charge Voltage 4.28 V Report No.: BL-SZ2270642-701 Tel: +86-755-66850100 E-mail: [email protected]…

Text truncated - open the document above for the full version.

Report No.: BL-SZ2270642-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 69 Web: www.titcgroup.com Template No.: TRP-FCC Part 15.247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: Shenzhen Jimi IoT Co., Ltd. Address: 3-4/F, Block A, Building #7, Shenzhen International Innovation Valley, Dashi 1st Road, Nanshan District, Shenzhen, Guangdong, China Equipment Type: Vehicle Terminal Model Name: VL802 Brand Name: JIMI FCC ID: 2AMLF-VL802 Test Standard: 47 CFR Part 15 Subpart C (refer section 3.1) Sample Arrival Date: Oct. 28, 2022 Test Date: Oct. 31, 2022 – Nov. 30, 2022 Date of Issue: Jan. 04, 2023 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Julie Zhu Checked by: Ye Hongji Approved by: Liao Jianming (Technical Director) _______________ _______________ _______________ Report No.: BL-SZ2270642-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 69 Web: www.titcgroup.com Template No.: TRP-FCC Part 15.247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Rev. 01 Jan. 04, 2023 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ......................................................................................................... 4 1.1 Test Laboratory .............................................................................................................. 4 1.2 Test Location .................................................................................................................. 4 2 PRODUCT INFORMATION ......................................................................................................... 5 2.1 Applicant Information ...................................................................................................... 5 2.2 Manufacturer Information ............................................................................................... 5 2.3 Factory Information ........................................................................................................ 5 2.4 General Description for Equipment under Test (EUT) ................................................... 5 2.5 Technical Information ..................................................................................................... 6 3 SUMMARY OF TEST RESULTS ................................................................................................. 8 3.1 Test Standards ............................................................................................................... 8 3.2 Test Verdict .................................................................................................................... 9 4 GENERAL TEST CONFIGURATIONS ...................................................................................... 10 4.1 Test Environments ....................................................................................................... 10 4.2 Test Equipment List ...................................................................................................... 10 4.3 Test Software List ......................................................................................................... 10 4.4 Measurement Uncertainty ............................................................................................ 11 4.5 Description of Test Setup ............................................................................................. 11 4.6 Measurement Results Explanation Example ................................................................ 14 5 TEST ITEMS .............................................................................................................................. 15 5.1 Antenna Requirements ................................................................................................. 15 5.2 Frequency Hopping Systems ....................................................................................... 16 5.3 Number of Hopping Frequencies ................................................................................. 18 5.4 Peak Output Power ...................................................................................................... 19 Report No.: BL-SZ2270642-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 69 Web: www.titcgroup.com Template No.: TRP-FCC Part 15.247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 5.5 Occupied Bandwidth .................................................................................................... 20 5.6 Carrier Frequency Separation ...................................................................................... 21 5.7 Time of Occupancy (Dwell time) .................................................................................. 22 5.8 Conducted Spurious Emission & Authorized-band band-edge .................................... 24 5.9 Conducted Emission .................................................................................................... 25 5.10 Radiated Spurious Emission ........................................................................................ 26 5.11 Band Edge (Restricted-band band-edge) ..................................................................... 28 ANNEX A TEST RESULT ............................................................................................................. 29 A.1 Number of Hopping Frequency .................................................................................... 29 A.2 Peak Output Power ...................................................................................................... 30 A.3 20 dB and 99% bandwidth .......................................................................................…

Text truncated - open the document above for the full version.

几米VL802拉美版BT天线规格书 JIMIVL802LatinAmericaneditionBluetoothAntenna specification Supplier （供应商名 称） GuangDongKingshineElectronic TechnologyCo.,ltd（广东科翔电子科技 股份有限公司） Material name（物料 名称） PCBonboardBluetoothantenna（PCB板载蓝牙天 线） Antenna type（规 格） Onboard Project model（项 目机型） VL802LatinAmericanversion （VL802拉美版） Color（颜 色） Environmen tal protection requiremen ts（环保要 求）  RoHScompliant（符合RoHS）  Non-RoHS（非RoHS）  REACH compliance（符合REACH）  Non-REACH（非REACH） 广东科翔电子科技股份有限公司 质量保证部门 QUALITYASSURANCEDEPARTMENT QA出货报告 QAOUTGOINGREPORT COUNTRYOFORIGIN(产地）： MadeinChina INTERNALP/N（内部编号）： 04AE37871B0 CUSTOMER（客户）: I0191 CUST.P/N（客编）： VL802_MB_V1.2 DRAWINGNO.（图纸编号): / REVISION（版本号）: V1.2CRITERIAAQLII0.65 ULLOGO（UL标记）： / DATECODE（周期）： 2230 LOTSIZE（批量): 108PCS ULFILENO.（UL认证号）： / FLAMMABILITYGRADE(耐燃等级)： 94V-0 SAMPLESIZE（抽样数): 20PCS ITEM DESCRIPTION（描述）SPECIFICATION（标准） ACTUAL ACCREJ (A)VISUAL(目视)： AQLII0.65OK√ (B)CUSTOMERINFORMATION（INCLUDINGCIRCUITSANDOUTLINE）客户资料（包括线路和外围）： 1 CONFORMANCE(一致性) √YESNO OK√ 2 LAY-UP(层压结构) C/SL2L3S/SOK√ (C)MATERIAL(材料)： 1 MATERIALTYPE( 材料型号 )FR-4S1000H OK√ SUPPLIERNAME(供应商): 生益 2 MATERIALTHICKNESS(材料厚度) 0.67+/-0.067mmOK√ 3COPPERCLADTHICKNESS(OZ)(底铜厚)H/HOZOK√ (D)MARKING(标记)： 1 ETCHED(蚀刻）SILKSCREEN（丝印） OK√ 2 MARKINGLOCATION(标记位置）： COMP.SIDE（元件面）SOLDERSIDE（焊接面 OK√ (E)PLATINGCOPPER（电镀铜箔）： 1 THROUGHPTHTHICKNESS(通孔铜厚）12.7UM(MIN)，15UM（AVG） seereport√ 2BLINDPTHTHICKNESS(盲孔厚度)/// 3 BURYPTHTHICKNESS(埋孔厚度) /// 4 SURFACETHICKNESS(MIN)（表铜厚） 20-45umseereport√ (F)SOLDERMASK&COMPONENTMARKING（绿油和白字）： 1 S/MMATERIAL(COLOR)（材料和颜色） D-400GD5GREEN OK√ APPLIEDTO（印于 √BOTHSIDES（双面）SINGLESIDE（单面） SUPPLIERNAME（供应商）： 永胜泰 2 S/MTAPE/SOLVENTTEST（胶纸/溶剂测试NOPEELOFF（不甩油） OK√ 3S/MREGISTRATION（对准度）±0.076MMOK√ 4 C/MMATERIAL(COLOR)（材料和颜色） RM-4000W WHITE OK√ APPLIEDTO（印于√BOTHSIDES（双面）SINGLESIDE（单面） SUPPLIERNAME（供应商）： 阪桥 5C/MTAPE/SOLVENTTEST（胶纸/溶剂测试NOPEELOFF（不甩油）OK√ 6 ILLEGIBLEMARKING（白字不清）NOALLOWED（不接受） OK√ (G)SURFACEFINISH（表面处理）： 1 HAL（喷锡） / // 2 IMMERSIONNI/AU（沉金） Au:≥0.025um;Ni:2.54-5.08um Au:0.034um&Ni:3.511um √ 3 OSP（抗氧化） / // 4 PLATINGGOLDFINGER（金手指） / // (H)PROFILE（成型）： 1V-CUT V-CUTAngle(V-CUT角度) /// V-CUTDepth(V-CUT余厚) /// 2 Shamfer (斜邊) ShamferDepth(斜邊深度) /// ShamferAngle(斜邊角度) /// 3 PUNCHING（啤板） /// 4 ROUTING（锣板） √ROUTINGOK√ (I)FINISHEDBOARD（成品）： 1 MIN.LINEWIDTH（最小线宽） 0.10±20%mm0.103mm√ 2 MIN.SPACING（最小线隙） 0.10±20%mm0.105mm√ 3 OVERALLBOARDTHICKNESS（完成板厚） 1.0+/-0.1mm0.997mm√ 4BOW&TWIST(MAX)（板弯板曲）0.75%(max)0.24%√ (J)FUNCTIONALTEST（功能测试）： 1 ELECTRICALTEST（电测试）OPEN/SHORT100%（开/短路） OK√ 盖印/色笔划板边STAMP100%√MARKATBOARDEDGE OK√ 2 IMPEDANCETEST（阻抗测试）seereport OK√ (K)HSF（判定）： 1 外箱标识是否张贴HSF标签 Yes 是 No否 2 原材料进料检验是否有核对第三方检测报告 Yes 是 No否 3 是否有做制程有害物质巡检表(巡检表编号：） Yes 是No否 AUDITEDBY： 胡红燕 DATE 2022.7.30 APPROVEDBY ：段仁丽 DATE： 2022.7.30 广东科翔电子科技股份有限公司 GuangDongKingshineElectronicTechnologyCo.,ltd ImpedanceMeasurementReport 阻抗测试报告 XYP/N: 04AE37871B0 CUSTOMER: I0191 CUSTP/N: VL802_MB_V1.2 DATECODE: 2230 SPEC: 50+/-5.0OHM TESTINGQTY: 5PNL LINEWIDTHSample1Sample2Sample3Sample4Sample5 50L15250514951 50L15048524753 50L35247515046 50L45053495152 TESTENVIRONMENT Antennaparameter: 2.4GPassive： 2/3D

Report No.: BL-SZ2270642-AR 1 / 4 TEST SETUP PHOTOS 1 Radiated Test Photo Below 30MHz-BT Close-up-BT Report No.: BL-SZ2270642-AR 2 / 4 30MHz-1GHz-BT Close-up-BT Report No.: BL-SZ2270642-AR 3 / 4 Above 1GHz-BT Close-up-BT Report No.: BL-SZ2270642-AR 4 / 4 2 Conducted Test Photo Conducted Test-BT