2AMNT-PUP0725SMARTLOCK

We want your feedback! Scan the code below and leave us your honest review SmartLock Quick Start Google’s Find Hub Thanks for purchasing SmartLock! Before you attach your Statik SmartLock in your luggage, let’s get it connected to the Find Hub app. 1 Power on: Press and hold the button for 5 seconds, the device will beep and turn on. (To confirm your device is powered on: Double-click the device button, the device will make a sound). 2 Open the Find Hub app on your Android™ device. A pop-up showing SmartLock will appear. Select “Connect”, “Agree” and “Continue” 3 Set a custom name for your device. Your device is now connected. Follow the tips below for the best SmartLock experience. •Change your SmartLock battery every 15 months to get the best finding experience. •Share your SmartLock with family inside the Find Hub app, so they can help you find your luggage. •Still having trouble? Reach out to our support team at [email protected] Operating Instructions •Power On: Press and hold the button for 5 seconds, the device will send a prompt tone, and the device has been turned on. •Disable: When the device is powered on, press the button 5 times in 2 seconds, the device will send a prompt sound, and the device will enter the shutdown sleep mode. •To Enable Identification: Locate the ON/OFF button on the SmartLock. Quickly press the button six times within 2 seconds. Locate your SmartLock 1. Open Find Hub app and select the SmartLock under the “My Devices” list. 2. Tap on your SmartLock. 3. Tap “Play Sound” to trigger the SmartLock locator sound. Tap “Stop Sound” to stop the sound once your SmartLock is found. Removing SmartLock from Google Find Hub App. •To remove your SmartLock from the Find Hub app, select the gear icon to navigate to Device Details. •At the bottom of the screen, select “Remove from Find Hub”. Legal Google, Android and Find Hub are trademarks of Google LLC. This product has been certified by Google to meet Find Hub network accessory specifications. Google is not responsible for the operation of this product. Google is also not responsible for ensuring that the product complies with any applicable safety standards or other requirements. Use And Care Statik SmartLock is water-resistant but not waterproof. We encourage you to bring your Statik SmartLock along on most of your wild adventures, but deep-sea explorations (and the like) are not recommended. It is not recommended that you expose the Statik SmartLock to extreme hot or cold temperatures. How to Perform a Factory Reset •When the device is turned on, press the Find My button 4 times in a row, the device plays a sound • Press and hold the Find My button as soon as you hear the sound. After two seconds, the SmartLock will emit a “tick, tick tick” sound. Do NOT release the button and continue holding for about 8 seconds. •The SmartLock will play a sound again. Release the button and the factory reset is complete. Use And Care Statik SmartLock is water-resistant but not waterproof. We encourage you to bring your Statik SmartLock along on most of your wild adventures, but deep-sea explorations (and the like) are not recommended. It is not recommended that you expose the Statik SmartLock to extreme hot or cold temperatures. How to Find the Serial Number To find your device’s serial number, follow the steps below: •Via the Find My app: •Open the Find My app, tap the Items tab, and tap your SmartLock. •Scroll to the bottom of the Item Detail card. The serial number is displayed below the manufacturer. •On the device: •The serial number is printed on the side of the SmartLock. Legal Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards. Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, iPod touch, Mac, macOS and watchOS are trademarks of Apple Inc. iOS is a trademark of Cisco and is used under license. FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. • from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable Hereby, Curv Group LLC declares that the radio equipment type is in compliance with Directive 2014/53/EU, The full text of the EU Declaration of Conformity is available at the following internet address: https://statik.com/pages/smartlock-conformity-documentation All Statik products come with a 2 year warranty. If your Statik break…

Text truncated - open the document above for the full version.

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: Curv Group LLC FRN: 0026640565 Contact Name: Michael Mike Address: 860 Bonnie Ln, Elk Grove Village, IL 60007, USA Telephone No: (+01)8476360101 Email: [email protected] Applicant: Company name: Curv Group LLC FRN: 0026640565 Product Description: SMARTLOCK Grantee code: 2AMNT FCC ID: 2AMNT-PUP0725 Contact Name: Michael Mike Address: 860 Bonnie Ln, Elk Grove Village, IL 60007, USA Telephone No: (+01)8476360101 Email: [email protected] [Curv Group LLC] certifies that, as of the date of this filing of the application with the TCB, [Curv Group LLC] is our designated US agent for service of process for the above referenced FCC ID. [Curv Group LLC] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [Curv Group LLC] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 07.17. 2026 Applicant’s Name: Michael Mike US Agent’s Name: Michael Mike Title: Manager Title: Manager Signature Signature

Attestation Statement. Old Code: C5266091 24 New Code: 00015544 Ed.3 Change reason: FRN is added to the Applicant information section. 1/1 TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Curv Group LLC Grantee code: 2AMNT FCC ID: 2AMNT-PUP0725 FRN: 0026640565 Contact Name: Michael Mike Address: 860 Bonnie Ln, Elk Grove Village, IL 60007, USA Telephone No: (+01)8476360101 Fax No: (+01)-8476360101 Email: [email protected] i. [Curv Group LLC] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Curv Group LLC] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. Curv Group LLC certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Date: 07.17.2026 Applicant’s Name: Michael Mike Title: Manager Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

Curv Group LLC Code 00018768 Ed. 2 Item 1. The device is able to install software/program installation? ☐ Yes, go to Item 2. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Item 2. Technical Requirements for Kaspersky Cybersecurity Software: # General Requirements (For all Devices) Yes / No or N/A Comments 1 Internet connection for activation and updates (For all Operating Systems) N/A Device SMARTLOCK Company name Curv Group LLC Grantee code 2AMNT FCC ID 2AMNT-PUP0725 FRN 0026640565 Contact name Michael Mike Address 860 Bonnie Ln, Elk Grove Village, IL 60007, USA Telephone number (+01)8476360101 E-mail [email protected] Chipset/module information nRF54L10 Operating System (if applicable) N/A Storage Capacity (hard drive or other permanent memory storage, if applicable) N/A 2 # General Requirements (For Windows Devices) Yes / No or N/A Comments 1 Storage: 1500 MB free space on the hard drive N/A 2 Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3 Processor: 1 GHz or higher (x86 or x64) N/A 4 Memory (RAM)1 GB (32-bit) or 2 GB (64-bit) N/A 5 Screen Resolution: Minimum resolution of 1024 x 768 N/A # General Requirements (For macOS devices) Yes / No or N/A Comments 1 Operating System macOS® 13 – 14 N/A 2 Memory (RAM)4 GB N/A 3 Storage: 3455 MB free space on the hard drive N/A # General Requirements (For Android Devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: Android™ 10 – 14 N/A 3 Screen Resolution: Minimum resolution of 320 x 480 N/A # General Requirements (for iOS devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: iOS® 17 N/A 3 # General Requirements (For Linux system) Yes / No or N/A Comments 1 Hard drive: 1 GB of free space N/A 2 CPU: Intel Pentium 1 GHz or higher N/A 3 RAM: 1 GB N/A 4 Minimum software requirements: AlmaLinux OS 8 or later; AlterOS 7.5 or later; Astra Linux Common Edition 2.12 or later; CentOS 6.7 or later; Debian GNU/Linux 10.0 or later; EulerOS 2.0 or later; Oracle Linux 7.3 or later ; Red Hat Enterprise Linux 6.7 or later ; Rocky Linux 8.5 or later ; SUSE Linux Enterprise Server 12.5 or later; Ubuntu 12.04 or later ; Uncom OS Home / Business / Education / Enterprise 2.2 or later; ALT Linux Workstaton / Workstation K / Server / Education 8 or later; ROSA Linux Workstation / Server 12 or later ; RED OS 7.3 and later ; N/A After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐ Yes, go to Item 3. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software 4 Item 3. Connectivity Capabilities: # Physical Interface Purpose Justification 1 1 # Wireless Interface Purpose Justification 1 1 After the review of this items, the device: ☒ Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐ Potentially can operate with any cybersecurity or anti-virus software on the covered list – additional third- party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies Signature: Name: Michael Mike Date: 7/17/2026 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more indications.

Curv Group LLC Product Similarity Declaration Product name: SMARTLOCK Model name: PUP-0725, PUP-0725-BLK, PUP-0725-ORG, PUP-0725-WHT, PUP-0725-SVR, PUP-0725-GRN FCC ID: 2AMNT-PUP0725 We (Curv Group LLC) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name and color. Signature: Name: Michael Mike Title: Manager Date: 7/17/2026

TCB CALL página 1 File FCC ID: 2AMNT-PUP0725 Please upload an exhibit that explains how does the TCB verify the new agent information: 1- Is the address of the agent a valid physical US mailing address (not a US post office box, not a virtual mailbox, not P.O. Boxes, not a vacant lot, not a public building, etc.) ○ We have checked if the address exists in a real and potential building (Google maps) + official US register, after this verification and the evidence below we can guarantee the following: not a US post office box not a virtual mailbox not P.O. Boxes not a vacant lot not a public building(note) ► We checked the FCC FRN Search based on the information provided by the grantee. On the official register from : In google: TCB CALL página 2 TCB CALL página 3 ► CONCLUSION by TCB: The ASOP defined and provided by grantee is VALID and confirmed. Therefore the exhibit " C5266091_X23_Ed1_US_Agent_Letter " included in the file is ok. 2- Is the agent physically located at that valid US address such that the agent can be legally served at that address? Yes , check above 3- Has the listed agent clearly agreed in writing to serve as the agent for the grantee at that address? Yes, it is included in the exhibit " C5266091_X23_Ed1_US_Agent_Letter " >

C5266091_X10_Ed.2 1/1 Curv Group LLC Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 7/17/2026 Subject: Request for Confidentiality FCC ID: 2AMNT-PUP0725 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: Michael Mike Title: Manager

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: Curv Group LLC Address: 860 Bonnie Ln, Elk Grove Village, IL 60007, USA Product Name: SMARTLOCK Model Number: PUP-0725, PUP-0725-BLK, PUP-0725-ORG, PUP-0725-WHT, PUP-0725-SVR, PUP-0725-GRN FCC Identifier: 2AMNT-PUP0725 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Michael Mike Date: 7/17/2026 Title: Manager Signature of applicant:

Page1of3ReportNo.:MTi260618022-0108 Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China. Tel:0755-88850135-1439Mobile:131-4343-1439(Wechatsamenumber)Web:http://www.mtitest.cnE-mail:[email protected] PhotographsoftheEUT(ExternalPhotos) Model:PUP-0725 Page2of3ReportNo.:MTi260618022-0108 Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China. Tel:0755-88850135-1439Mobile:131-4343-1439(Wechatsamenumber)Web:http://www.mtitest.cnE-mail:[email protected] Page3of3ReportNo.:MTi260618022-0108 Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China. Tel:0755-88850135-1439Mobile:131-4343-1439(Wechatsamenumber)Web:http://www.mtitest.cnE-mail:[email protected]

Page1of3ReportNo.:MTi260618022-0108 Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China. Tel:0755-88850135-1439Mobile:131-4343-1439(Wechatsamenumber)Web:http://www.mtitest.cnE-mail:[email protected] PhotographsoftheEUT(InternalPhotos) Model:PUP-0725 Page2of3ReportNo.:MTi260618022-0108 Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China. Tel:0755-88850135-1439Mobile:131-4343-1439(Wechatsamenumber)Web:http://www.mtitest.cnE-mail:[email protected] Page3of3ReportNo.:MTi260618022-0108 Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China. Tel:0755-88850135-1439Mobile:131-4343-1439(Wechatsamenumber)Web:http://www.mtitest.cnE-mail:[email protected]

Tel:0755-88850135-1439 Mobile:131-4343-1439（Wechatsamenumber） Web:http://www.mtitest.cnE-mail:[email protected] Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China Q/MTI-QP-12-FE012 Ver./Rev.：A1 Page 1 of 6 RFEXPOSURE TestReport ReportNo.:MTi260618022-0108E2 DateofIssue:2026-07-06 Applicant:CurvGroup,LLC Product:SMARTLOCK Model(s):PUP-0725,PUP-0725-BLK,PUP-0725-ORG,PUP- 0725-WHT,PUP-0725-SVR,PUP-0725-GRN FCCID:2AMNT-PUP0725 ShenzhenMicrotestCo.,Ltd. TESTREPORT ReportNo.:MTi260618022-0108E2 Tel:0755-88850135-1439 Mobile:131-4343-1439（Wechatsamenumber） Web:http://www.mtitest.cnE-mail:[email protected] Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China Q/MTI-QP-12-FE012 Ver./Rev.：A1 Page2of6 Tableofcontents 1StandaloneSARtestexclusionconsiderations.................................................................4 2SARTestExclucsionThresholds.........................................................................................5 TESTREPORT ReportNo.:MTi260618022-0108E2 Tel:0755-88850135-1439 Mobile:131-4343-1439（Wechatsamenumber） Web:http://www.mtitest.cnE-mail:[email protected] Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China Q/MTI-QP-12-FE012 Ver./Rev.：A1 Page3of6 TestResultCertification ApplicantCurvGroup,LLC ApplicantAddress860BonnieLn,ElkGroveVillage,IL60007,USA ManufacturerShenzhenXinzhenshengElectronicsCo.,LTD Manufacturer Address 401,No.15,FuhaiIndustrialZone2,FuyongCommunity,Fuyong Street,BaoanDistrict,Shenzhen FactoryShenzhenXinzhenshengElectronicsCo.,LTD Factory Address 401,No.15,FuhaiIndustrialZone2,FuyongCommunity,Fuyong Street,BaoanDistrict,Shenzhen Productdescription ProductnameSMARTLOCK TrademarkSTATIK ModelnamePUP-0725 SeriesModel(s) PUP-0725-BLK,PUP-0725-ORG,PUP-0725-WHT,PUP-0725-SVR,PUP- 0725-GRN Standards47CFRPart2.1093 TestmethodKDB447498D01v06 TestingInformation Dateoftest2026-07-03to2026-07-04 TestResultPass Preparedby:LetterLan Reviewedby:DavidLee Approvedby:LewisLian TESTREPORT ReportNo.:MTi260618022-0108E2 Tel:0755-88850135-1439 Mobile:131-4343-1439（Wechatsamenumber） Web:http://www.mtitest.cnE-mail:[email protected] Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China Q/MTI-QP-12-FE012 Ver./Rev.：A1 Page4of6 1StandaloneSARtestexclusionconsiderations UnlessspecificallyrequiredbythepublishedRFexposureKDBprocedures,standalone1-g headorbodyand10-gextremitySARevaluationforgeneralpopulationexposureconditions,by measurementornumericalsimulation,isnotrequiredwhenthecorrespondingSARTest ExclusionThresholdcondition(s),listedbelow,is(are)satisfied. Thesetestexclusionconditionsarebasedonsource-basedtime-averagedmaximum conductedoutputpoweroftheRFchannelrequiringevaluation,adjustedfortune-uptolerance, andtheminimumtestseparationdistancerequiredfortheexposureconditions. Theminimumtestseparationdistancedefinedin4.1f)isdeterminedbythesmallestdistance fromtheantennaandradiatingstructuresoroutersurfaceofthedevice,accordingtothehost formfactor,exposureconditionsandplatformrequirements,toanypartofthebodyorextremity ofauserorbystander. ToqualifyforSARtestexclusion,thetestseparationdistancesappliedmustbefullyexplained andjustified,typicallyintheSARmeasurementorSARanalysisreport,bytheoperating configurationsandexposureconditionsofthetransmitterandapplicablehostplatform requirements,accordingtotherequiredpublishedRFexposureKDBprocedures. WhennootherRFexposuretestingorreportingarerequired,astatementofjustificationand compliancemustbeincludedintheequipmentapproval,inlieuoftheSARreport,toqualifyfor SARtestexclusion. Whenrequired,thedevicespecificconditionsdescribedintheotherpublishedRFexposure KDBproceduresmustbesatisfiedbeforeapplyingtheseSARtestexclusionprovisions. a)For100MHzto6GHzandtestseparationdistances≤50mm,the1-gand10-gSARtest exclusionthresholdsaredeterminedbythefollowing: [(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparationdistance, mm)]·[√f(GHz)]≤3.0for1-gSAR,and≤7.5for10-gextremitySAR,where f (GHz) istheRFchanneltransmitfrequencyinGHz  PoweranddistanceareroundedtothenearestmWandmmbeforecalculation  Theresultisroundedtoonedecimalplaceforcomparison Thevalues3.0and7.5arereferredtoasnumericthresholdsinstepb)below Thetestexclusionsareapplicableonlywhentheminimumtestseparationdistanceis≤50mm, andfortransmissionfrequenciesbetween100MHzand6GHz.Whentheminimumtest separationdistanceis<5mm,adistanceof5mmaccordingto4.1f)isappliedtodetermine SARtestexclusion. b)For100MHzto6GHzandtestseparationdistances>50mm,the1-gand10-gSARtest exclusionthresholdsaredeterminedbythefollowing(alsoillustratedinAppendixB): 1){[Powerallowedatnumericthresholdfor50mminstepa)]+[(testseparation distance–50mm)·(f(MHz)/150)]}mW,for100MHzto1500MHz 2){[Powerallowedatnumericthresholdfor50mminstepa)]+[(testseparation distance–50mm)·10]}mW,for>1500MHzand≤6GHz c)Forfrequenciesbelow100MHz,thefollowingmaybeconsideredforSARtestexclusion (alsoillustratedinAppendixC): 1)Fortestseparationdistances>50mmand<200mm,thepowerthresholdatthe correspondingtestseparationdistanceat100MHzinstepb)ismultipliedby[1+ log(100/f(MHz))] TESTREPORT ReportNo.:MTi260618022-0108E2 Tel:0755-88850135-1439 Mobile:131-4343-1439（Wechatsamenumber） Web:http://www.mtitest.cnE-mail:[email protected] Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China Q/MTI-QP-12-FE012 Ver./Rev.：A1 Page5of6 2)Fortestseparationdistances≤50mm,thepowerthresholddeterminedbythe equationinc)1)for50mmand100MHzismultipliedby½ 3)SARmeasurementproceduresarenotestablishedbelow100MHz. WhenSARtestexclusioncannotbeapplied,aKDBinquiryisrequiredtodetermineSAR evaluationrequirementsforanySARtestresultsbelow100MHztobeacceptable. 2SARTestExclucsionThresholds Weuse5mmasseparationdistancetocalculated. BluetoothDTS: Transmit Frequency (GHz) Mo…

Text truncated - open the document above for the full version.

Tel:0755-88850135-1439 Mobile:131-4343-1439（Wechatsamenumber） Web:http://www.mtitest.cnE-mail:[email protected] Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China Q/MTI-QP-12-FE038 Ver./Rev.：A1 Page 1 of 62 TestReport ReportNo.:MTi260618022-0108E1 Dateofissue:2026-07-06 Applicant:CurvGroup,LLC Product:SMARTLOCK Model(s):PUP-0725,PUP-0725-BLK,PUP-0725-ORG, PUP-0725-WHT,PUP-0725-SVR,PUP-0725-GRN FCCID:2AMNT-PUP0725 ShenzhenMicrotestCo.,Ltd. TESTREPORT ReportNo.:MTi260618022-0108E1 Tel:0755-88850135-1439Mobile:131-4343-1439(Wechatsamenumber)Web:http://www.mtitest.cnE-mail:[email protected] Address:101,No.7,Zone2,XinxingIndustrialPark,FuhaiAvenue,XinheCommunity,FuhaiStreet,Bao’anDistrict,Shenzhen,Guangdong,China Q/MTI-QP-12-FE038 Ver./Rev.：A1 Page 2 of 62 Tableofcontents 1GeneralDescription.......................................................................................................................4 1.1DescriptionoftheEUT.........................................................................................................4 1.2Descriptionoftestmodes.....................................................................................................4 1.3EnvironmentalConditions.....................................................................................................6 1.4Descriptionofsupportunits..................................................................................................6 1.5Measurementuncertainty.....................................................................................................6 2SummaryofTestResult................................................................................................................7 3TestFacilitiesandaccreditations................................................................................................8 3.1Testlaboratory......................................................................................................................8 4Listoftestequipment....................................................................................................................9 5EvaluationResults(Evaluation).................................................................................................11 5.1Antennarequirement..........................................................................................................11 6RadioSpectrumMatterTestResults(RF)................................................................................12 6.16dBBandwidth....................................................................................................................12 6.2MaximumConductedOutputPower..................................................................................14 6.3PowerSpectralDensity......................................................................................................15 6.4RFconductedspuriousemissionsandbandedgemeasurement....................................16 6.5Bandedgeemissions(Radiated).......................................................................................17 6.6Radiatedemissions(below1GHz).....................................................................................21 6.7Radiatedemissions(above1GHz)....................................................................................25 Photographsofthetestsetup...........................................................................................................30 PhotographsoftheEUT.....................................................................................................................31 AppendixA:DTSBandwidth.............................................................................................................33 AppendixB:Maximumconductedoutputpower...........................................................................37 AppendixC:Maximumpowerspectraldensity................................................…

Text truncated - open the document above for the full version.