2AMPL-EAS-3000Portable Bluetooth Speaker

Portable Bluetooth Speaker ® with Carrying Strap EAS-3000 Instruction Manual Please read before operating product 2 Thank You We know you have many choices when it comes to technology; thank you for choosing us here at Naxa Electronics. Established in 2001 in Los An- geles, California, we are dedicated to delivering products that entertain and delight. We trust that you will be happy with your purchase. Please read this manual carefully and save it for refer and other product material at our website. Come visit us on the web at www.emersonaudio.com and see all 3 In The Box Please take a moment to make sure that you have everything in the list below. Although we device is securely packed and sealed, we know a lot can happen in between us and you. If anything is missing, check back with your local retailer to get immediate assistance. If they can not help you, please contact our Naxa Support team at www.naxa.com/supportcenter/. • EAS-3000 • USB charging cable 4 Features • Bluetooth® functionality allows you to wireless- ly stream all your favorite entertainment content from Bluetooth-enabled devices in high-quality audio • Play media from removable storage devices, such as TF memory cards and USB flash drives thanks to the built-in TF card slot and USB port • Modern, stylish design and included carrying strap make this Bluetooth® speaker a welcome accessory for wherever you go • LED indicator light keeps you in the know on all status updates • High-power speaker produces peerless soft, clear, and dynamic sound • Set the speaker down and enjoy your favorite tunes from across the room with ease thanks to the wireless range of up to 33 feet • Manually connect external media devices via the 3.5mm auxiliary input, boasting a seamless connection with minimal transmission loss • Tune in on all of your favorite local radio station with the FM radio tuner • Accessories Included: USB charge cable, carrying strap, user manual 5 At A Glance 1. DC 5V slot: Standard Micro USB charging cable for power charging. 2. TF slot: It can decode and play MP3 format audio when a TF card is put into the slot. 3. USB slot: It can decode and play MP3 format 4. AUX IN slot: Use 3.5mm auxiliary cable to connect to external media devices. song. Press and hold to turn down the volume. 2 341 6 6. When playing music, briefly press for next song. Press and hold to turn up the volume. 7. When playing music, (USB card/TF card/ Wireless/AUX in), briefly press to play/pause. 8.When playing music, (TF card/AUX in/USB card/Wireless), briefly press to switch modes. Press and hold to power on. Press and hold again to power off. 7 Connecting Power Works on internal rechargeable Lithium battery. Please charge your speaker fully before first use. To charge the battery : 1. Using a Micro USB cable (included), insert the jack into Charging jack located at the back of the units and then plug the USB connecter into the USB port on a computer for charging. 2. A red light aside will indicate the charging situation. When battery is full, the red light will turn off automatically. 8 Bluetooth Mode ® your speaker is powered on and in pairing mode. 2. Select the pairing name “EMERSON EAS-3000” from your device’s Bluetooth® menu and connect it, then the Blue LED light will go steady after connecting successfully. NOTE: while playing music, the Blue LED light If connection fails, restart device and do steps 1 & 2 again. 9 Music Playback Once you have paired an external media device with the twin speakers via Bluetooth®, you can play all of your favorite songs over the speakers. To do so: 1. Open the music library on your connected Bluetooth® media device. 2. Choose a song and begin playback to stream music through the connected twin speakers. 10 USB Mode This speaker allows you to listen to music from USB flash drives. To do so, follow these steps: 1. Turn on speaker. 2. Then, press the mode button to cycle through modes until you are in “USB Mode”. 3. Insert the USB flash drive you wish to listen to into the USB port. 4. Press play to begin media playback. During Playback: • Hold the Volume Up/Down button to control volume. • Briefly press the Volume Up/Down button to go to the next/previous track. 11 TF Mode This speaker allows you to listen to music from TF memory cards. To do so, follow these steps: 1. Turn on speaker. 2. Then, press the mode button to cycle through modes until you are in “TF Mode”. 3. Insert the memory card you wish to listen to into the TF card slot. 4. Press play to begin media playback. During Playback: • Hold the Volume Up/Down button to control volume. • Briefly press the Volume Up/Down button to go to the next/previous track. 12 AUX Mode This speaker allows you to listen to music from external devices via 3.5mm auxiliary connection. To do so, follow these steps: 1. Turn on speaker. 2. Then, press the mode button to cycle through modes until you are in “AUX IN” mode. 3. Insert one end of an auxiliary cable (not included) into the 3.5mm AUX port on the speaker. 4. Insert the other end of the auxiliary cable into the external media device you wish to listen to music from. 5. Press play to begin media playback. During Playback: • Hold the Volume Up/Down button to control volume. • Briefly press the Volume Up/Down button to go to the next/previous track. 13 FM Mode This speaker allows you to listen to all of your favorite local radio stations. To do so, follow these steps: 1. Turn on speaker. 2. Then, press the mode button to cycle through modes until you are in “FM” mode. 3. In FM mode, Press and hold the play/pause button to search stations automatically, brielfy press to stop searching. NOTE: When using FM mode, insert the USB cable in the USB port for better station reception During Playback: • Hold the Volume Up/Down button to control volume. to the next/previous station. 14 Answering Phone Calls Once you have paired an external media device with the twin speakers via Bluetooth®, you can answer, end, or make calls via …

Text truncated - open the document above for the full version.

Page 1 of 5 FCC ID: 2AMPL-EAS-3000 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. External Photos Photo 1 Photo 2 Page 2 of 5 FCC ID: 2AMPL-EAS-3000 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 3 Photo 4 Page 3 of 5 FCC ID: 2AMPL-EAS-3000 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 5 Photo 6 Page 4 of 5 FCC ID: 2AMPL-EAS-3000 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 7 Photo 8 Page 5 of 5 FCC ID: 2AMPL-EAS-3000 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 9 ------End------

FCC ID Label FCC ID: 2AMPL-EAS-3000

Page 1 of 4 FCC ID: 2AMPL-EAS-3000 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Internal Photos Photo 1 Photo 2 Page 2 of 4 FCC ID: 2AMPL-EAS-3000 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 3 Photo 4 Page 3 of 4 FCC ID: 2AMPL-EAS-3000 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 5 Photo 6 Antenna Page 4 of 4 FCC ID: 2AMPL-EAS-3000 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 7 Photo 8 ------End------

RF Exposure evaluation FCC ID: 2AMPL-EAS-3000 1.1. Applicable Standard According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1093 RF exposure requirement KDB447498 v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies 1.2. Requirement According to KDB447498 D01 General RF Exposure Guidance v06 Section 4.3.1 Standalone SAR test exclusion considerations: “Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition, listed below, is satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions.22 The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander (see 5) of section 4.1). To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, typically in the SAR measurement or SAR analysis report, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting is required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for the SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions; for example, handheld PTT two-way radios, handsets, laptops & tablets etc.23 “ [(max. power of channel, including tune-up tolerance, mW)/ (min. test separation distance, mm)] · [√f (GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f (GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. [Bluetooth] GFSK (Peak) Channel Channel 0 Channel 39 Channel 78 Target (dBm) 2 2 1 Tolerance ±(dB) 1.0 1.0 1.0 π/4DQPSK (Peak) Channel Channel 0 Channel 39 Channel 78 Target (dBm) 2 2 1 Tolerance ±(dB) 1.0 1.0 1.0 2. Evaluation Result Standalone Antenna 1 Band/Mode f (GHz) Antenna Distance (mm) RF output power including tune up SAR Test Exclusion Threshold SAR Test Exclusion Estimated SAR dBm mW BT 2.55 32.000.631< 3 Yes 0.0841 Remark: 1. Output power including tune up tolerance; 2. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to f) in section 4.1 is applied to determine SAR test exclusion. 3. Conclusion The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v06, No SAR is required. .....................End.........................

Page 1 of 38 Report No.: AIT22113006W1 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. TEST REPORT Client Information: Applicant: Dongshun Tech Development Limited Applicant add.: 2F,building7,Huayisheng Industrial Park,Fenghuang Community,Fuyong Street,Bao'an district,Shenzhen,China Manufacturer: Dongshun Tech Development Limited Manufacturer add.: 2F,building7,Huayisheng Industrial Park,Fenghuang Community,Fuyong Street,Bao'an district,Shenzhen,China Product Information: Product Name: Portable Bluetooth Speaker Model No.: EMERSON EAS-3000 Brand Name: EMERSON FCC ID: 2AMPL-EAS-3000 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Prepared By: Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang,Dongguan, Guangdong, China Tel.: +86-769-8202 0499 Fax.: +86-769-8202 0495 Date of Receipt: Nov. 29, 2022 Date of Test: Nov. 29, 2022~ Dec. 04, 2022 Date of Issue: Dec. 05, 2022 Test Result: Pass This device described above has been tested by Dongguan Yaxu (AiT) Technology Limited and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. Note: This report shall not be reproduced except in full, without the written approval of Dongguan Yaxu (AiT) Technology Limited, this document may be altered or revised by Dongguan Yaxu (AiT) Technology Limited, personal only, and shall be noted in the revision of the document. This test report must not be used by the client to claim product endorsement. Reviewed by: Approved by: Simba Huang Seal.chen Page 2 of 38 Report No.: AIT22113006W1 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. 1 Contents Page COVER PAGE 1 CONTENTS .................................................................................................................................................................... 2 2 TEST SUMMARY .......................................................................................................................................................... 4 2.1 Statement of the Measurement Uncertainty .............................................................................. 4 2.2 Measurement Uncertainty ......................................................................................................... 4 3 TEST FACILITY ............................................................................................................................................................. 5 3.1 Deviation from standard ............................................................................................................ 5 3.2 Abnormalities from standard conditions .................................................................................... 5 3.3 Test Location ............................................................................................................................. 5 4 GENERAL INFORMATION ......................................................................................................................................... 6 4.1 Test frequencies ........................................................................................................................ 7 4.2 EUT Peripheral List ................................................................................................................... 8 4.3 Test Peripheral List ................................................................................................................... 8 4.4 TEST METHODOLOGY............................................................................................................ 9 4.5 Description of Test Modes ....................................................................................................... 10 5 EQUIPMENT USED DURING TEST ........................................................................................................................ 11 6 TEST RESULTS AND MEASUREMENT DATA .................................................................................................... 12 6.1 Antenna requirement .............................................................................................................. 12 6.2 Peak Power Measurement ...................................................................................................... 13 6.3 Frequency Separation and 20 dB Bandwidth .......................................................................... 15 6.4 Number of Hopping Frequency ............................................................................................... 17 6.5 Time of Occupancy (Dwell Time) ............................................................................................ 18 6.6 Conducted Spurious Emissions and Band Edges Test ........................................................... 20 6.7 Restrict-band Band-edge Measurements ............................................................................... 22 6.8 Radiated Emissions Measurement ......................................................................................... 24 6.9 Conducted Emissions ............................................................................................................. 34 6.10 Pseudorandom frequency hopping sequence ......................................................................... 37 7 TEST SETUP PHOTOGRAPHS OF EUT ................................................................................................................ 38 8 EXTERNAL PHOTOGRAPHS OF EUT ................................................................................................................... 38 9 INTERNAL PHOTOGRAPHS OF EUT .................................................................................................................... 38 Page 3 of 38 Report No.:…

Text truncated - open the document above for the full version.

Inverted F Antenna Specification Summary ITEMANT SPEC Model Name 2.4G ANT HorizontalVertical 2400MHz 2400MHz2500MHz2400MHz2400MHz 2500MHz Center Frequency -1.26-0.76-0.58-5.25-2.46-1.86 MAX. Gain -0.58dBi PolarizationHorizontal and Vertical Azimuth Beam Pattern Omni-directional Impedance50 Ohm Antenna Length 38.20mm Manufacture ZHUHAI JIELI TECHNOLOGY CO.,LTD Antenna Photo & Length (mm) Horizontal: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -40 Scale: 5/div Gain(dBi) Frequency (MHz) MaxMinAvg 2400-1.26174-30.0801-7.18716 2450-0.765802-36.5604-7.48023 2500-0.585582-22.0315-6.59127 Vertical: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -30 Scale: 5/div Gain(dBi) Frequency (MHz) MaxMinAvg 2400-5.2537-22.1424-12.4294 2450-2.4652-24.5837-10.4702 2500-1.86120-29.5214-9.20432 ANT Test Labs：Attestation of Global Compliance Co., Ltd.

Dongguan Yaxu(AiT) Technology Limited Report No.: AIT22113006W1 FCC ID: 2AMPL-EAS-3000 Page 1 of 42 Appendix A RF Test Data for BT(BDR/EDR) (Conducted Measurement) Product Name: Portable Bluetooth Speaker Trade Mark: EMERSON Test Model: EMERSON EAS-3000 Environmental Conditions Temperature: 24.2°C Relative Humidity: 52.0% ATM Pressure: 101Kpa Test Engineer: Simba Huang Supervised by: Seal Chen Dongguan Yaxu(AiT) Technology Limited Report No.: AIT22113006W1 FCC ID: 2AMPL-EAS-3000 Page 2 of 42 Contents Page COVER PAGE 1 Duty Cycle ........................................................................................................................................................................................... 3 1.1 Test Result ............................................................................................................................................................................... 3 1.2 Test Graphs ............................................................................................................................................................................. 4 2 Maximum Conducted Peak Output Power .......................................................................................................................................... 7 2.1 Test Result ............................................................................................................................................................................... 7 2.2 Test Graphs ............................................................................................................................................................................. 8 3 20dB Bandwidth ................................................................................................................................................................................ 11 3.1 Test Result ............................................................................................................................................................................. 11 3.2 Test Graphs ........................................................................................................................................................................... 12 4 Carrier Frequency Separation ........................................................................................................................................................... 15 4.1 Test Result ............................................................................................................................................................................. 15 4.2 Test Graphs ........................................................................................................................................................................... 16 5 Hopping Channel Number ................................................................................................................................................................. 17 5.1 Test Result ............................................................................................................................................................................. 17 5.2 Test Graphs ........................................................................................................................................................................... 18 6 Dwell Time ......................................................................................................................................................................................... 19 6.1 Test Result ............................................................................................................................................................................. 19 6.2 Test Graphs ........................................................................................................................................................................... 20 7 RF Conducted Spurious Emissions ................................................................................................................................................... 22 7.1 Test Result ............................................................................................................................................................................. 22 7.2 Test Graphs ........................................................................................................................................................................... 23 8 Band-edge for RF Conducted Emissions .......................................................................................................................................... 29 8.1 Test Result ............................................................................................................................................................................. 29 8.2 Test Graphs ........................................................................................................................................................................... 30 9 Restrict-band band-edge measurements .......................................................................................................................................... 38 9.1 Test Result ............................................................................................................................................................................. 38 9.2 Test Graphs ........................................................................................................................................................................... 39 Dongguan Yaxu(AiT) Technology Limited Report No.: AIT22113006W1 FCC ID: 2AMPL-EAS-3000 Page 3 of 42 1 Duty Cycle 1.1 Test Result Mode Frequency (MHz) Duty Cycle (%) 1/T (kHz) 1-DH1 2402 31.2 2.63 1-DH1 2441 31.2 2.63 1-DH1 2480 30.65 2.63 2-DH1 2402 31.9 2.63 2-DH1 2441 32 2.56 2-DH1 2480 32 2.56 Dongguan Yax…

Text truncated - open the document above for the full version.

Page 1 of 2 FCC ID: 2AMPL-EAS-3000 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Test Setup Photo Radiated Emission Page 2 of 2 FCC ID: 2AMPL-EAS-3000 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Conducted Emission ------End------