2AMWY-H1Wireless Headphone

Thi s device complie s wit h par t 15 of the F CC Rules. Ope ration is subject to the f ol lo wing two conditio ns: (1) Thi s device ma y n ot cause ha rmful interferen ce, and (2) thi s device must accept any in terference receiv ed , in cl udi ng interference that may ca use un de sire d op er ation. An y Cha nge s or modificatio ns no t expressly app roved by th e pa rt y responsible for complia nce could void the user's au th ori ty t o operat e t he eq uipment. Note:Thi s equi pment ha s been t ested and f ou nd to comply with the li mits for a Class B digital d evi ce, pu rsu an t to pa rt 15 of the FCC Ru le s. The se limi ts are de signed to provide reaso na ble protection against ha rmful interferen ce in a residentia l in stalla ti on . Thi s equip ment ge nerate s uses and can radia te radio frequency energy an d, if not installed and use d in accordance wit h the instructions, ma y c au se harmful in terference to radio communications. Howev er , there is no gu ar an te e that i nterference w ill no t occur in a pa rticula r installa tio n. I f this equ ip men t does cause harmful i nterference to radio or t el evi sion reception, which ca n be de termined by turning the eq uipment of f an d on , the user is en co uraged to tr y to correct the in terference b y one or more of the f ol lo wing measures: Re orient or relocate the receiving a ntenna . Increase the s ep ar ation be twee n the eq uipment an d receiver. Co nne ct the e qu ipment into an outl et on a circuit differ en t from tha t to which t he receive r is connected. Co ns ul t the dealer or a n experienc ed radio /T V t echni ci an f or help . The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC Warning

ShenzhenPincunDigitalTechnologyCo., Ltd. 2407, Building11, PhaseII, TiananYunguIndustrialPark, Gangtou Community,BantianStreet,LonggangDistrict,ShenzhenCity, China FederalCommunicationsCommission Authorizationand EvaluationDivision EquipmentAuthorizationBranch 7435 OaklandMills Road Columbia,MD 21046 2024-3-30 U.S. AgentDesignation ShenzhenPincunDigitalTechnologyCo., Ltd.acknowledgestheir consentfor the followingcontactlocatedin the UnitedStatesto act as their agent for serviceof processfor the equipmentfor whichauthorizationis sought (FCC ID:2AMWY-H1): Nameand companyof U.S. agent:ACT Lab LLC PhysicalU.S. addressof agent:3280 East 59th StreetLong Beach,CA 90805UnitedStates FRN of U.S. agent:0033465568 Email addressof U.S. agent:[email protected] ACT Lab LLCacknowledgestheir obligationto acceptserviceof processon behalfofShenzhenPincunDigital TechnologyCo., Ltd.. ShenzhenPincunDigitalTechnologyCo., Ltd.with the FRN[0026679084]acceptsits obligationto maintain an agentfor serviceof processin the UnitedStatesfor no less than one year after eitherthe granteehas permanentlyterminatedall marketingand importationof the applicableequipmentwithinthe U.S., or the conclusionof any Commission-relatedadministrativeor judicialproceedinginvolvingthe equipment,whicheveris later. By signingthis form, we confirmthe aboveand that we are awareof the applicationrequirementslisted under§ 2.911(d)(7). The informationprovidedin this letter is basedon the referencedrule parts of Title 47 of the CFR as well as KDB 986446D01. An expirationdate for this letter does not exist. In case the U.S. agent changes,the granteeis obligatedto notify the FCC within 30 days via the grantingTCB. Sincerely, Signature Ai Willian N/A ShenzhenPincunDigitalTechnologyCo., Ltd. Signature Scott Huber SeniorTechnicalDirector ACT Lab LLC 48_[model] US_Agent_2.911(d)(7)-U, V05

FCC ID: 2AMWY-H1 TB-RF-074-1.0 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT FCC ID: 2AMWY-H1 TB-RF-074-1.0 Photo 3 Appearance of EUT Photo 4 Appearance of EUT FCC ID: 2AMWY-H1 TB-RF-074-1.0 Photo 5 Appearance of EUT Photo 6 Appearance of EUT FCC ID: 2AMWY-H1 TB-RF-074-1.0 Photo 7 Appearance of EUT Photo 8 Appearance of EUT FCC ID: 2AMWY-H1 TB-RF-074-1.0 Photo 9 Appearance of EUT Photo 10 Appearance of EUT FCC ID: 2AMWY-H1 TB-RF-074-1.0 Photo 11 Appearance of EUT

FCC ID: 2AMWY-H1 TB-RF-074-1.0 Appendix IID Label Appendix II ID Label Location Wireless Headphone FCC ID: 2AMWY-H1 Model: picun H1

FCC ID: 2AMWY-H1 TB-RF-074-1.0 Appendix IV EUT Internal Photographs Photo 12 Internal of EUT Photo 13 Internal of EUT FCC ID: 2AMWY-H1 TB-RF-074-1.0 Photo 14 Internal of Battery Photo 15 Appearance of PCB FCC ID: 2AMWY-H1 TB-RF-074-1.0 Photo 16 Appearance of PCB Photo 17 Appearance of PCB Antenna

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202403-0006-15 Page: 1 of 3 TB-RF-074-1.0 1 A/F., Building.6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao’an, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 RF Exposure Evaluation FCC ID: 2AMWY-H1 1. Client Information Applicant : Shenzhen Pincun Digital Technology Co., Ltd. Address : 2407, Building 11, Phase II, Tianan Yungu Industrial Park, Gangtou Community, Bantian Street, Longgang District, Shenzhen City, China Manufacturer : Shenzhen Pincun Digital Technology Co., Ltd. Address : 2407, Building 11, Phase II, Tianan Yungu Industrial Park, Gangtou Community, Bantian Street, Longgang District, Shenzhen City, China 2. General Description of EUT EUT Name : Wireless Headphone Model(s) No. : picun H1, picun H1S, picun W2, picun QW-10, picun H2 Model Difference : All these models are identical in the same PCB, layout and electrical circuit, the only difference is appearance. Product Description : Operation Frequency: Bluetooth 5.3(BR+EDR): 2402MHz~2480MHz Number of Channel: 79 channels Antenna Gain: 2.67dBi Chip Antenna Modulation Type: GFSK(1Mbps) π/4-DQPSK(2Mbps) Power Rating : USB Input: DC 5V Power Rating (Charger Box) : DC 3.7V by 250mAh 0.925Wh Rechargeable Li-ion battery Power Rating (Earphone) : DC 3.7V by 50mAh Rechargeable Li-ion battery Software Version : 1.00 Hardware Version : 1.00 Remark: The antenna gain provided by the applicant, the adapter and verified for the RF conduction test and adapter provided by TOBY test lab. Note: More test information about the EUT please refer the RF Test Report. Report No.: TBR-C-202403-0006-15 Page: 2 of 3 TB-RF-074-1.0 SAR Test Exclusion Calculations 1. FCC: According to KDB 447498 D01 Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies v06. (1) Clause 4.3: General SAR test reduction and exclusion guidance Sub clause 4.31: Standalone SAR test exclusion considerations 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6GHz at test separation distance≤5 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation, mm)]*[√f (GHz) ] ≤3.0 for 1-g SAR [(max. power of channel, including tune-up tolerance, mW)/(min. test separation, mm)]*[√f (GHz) ] ≤7.5.0 for 10-g SAR Report No.: TBR-C-202403-0006-15 Page: 3 of 3 TB-RF-074-1.0 2. Calculation: Test separation: 5mm Bluetooth Mode (GFSK) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2.402 -8.238 -8±1 -7 0.2 0.062 3.0 2.441 -7.604 -7±1 -6 0.251 0.078 3.0 2.480 -7.345 -7±1 -6 0.251 0.079 3.0 Bluetooth Mode (Pi/4-DQPSK) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2.402 -7.357 -7±1 -6 0.251 0.078 3.0 2.441 -6.771 -6±1 -5 0.316 0.099 3.0 2.480 -6.423 -6±1 -5 0.316 0.100 3.0 The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v06. -----END OF THE REPORT-----

深圳市朋伴兴业科技有限公司 Confirmation of product specifications SPECIFICATIONS CUSTOM ER: customer: Product name: DESCRIPTION: Bluetooth antenna Customer model: CUSTOMER PART No: Product model: OUR MODEL NO: PBX3216MC02 Date: DATE: 2020/12/22 Please confirm your signature and seal, and return a copy of the acknowledgement. PLEASE RETURN TO US ONE COPY OF “SPECIFICATION FOR APPROVAL” WITH YOUR APPROVED SIGNATURES check and ratify Wang haicheckLiu FeimakeLiu Xiaomei Customer acknowledges signing. date UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝ A N G L E S ＝± H O L E D I A ＝± Shenzhen pengban xingye technology co., ltd SCALE：N/AUNIT：mm THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PBXY TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD SPEC REV. 深圳市朋伴兴业科技有限公司 TITLE：CHIP2450-3216 Specification DOCUMENT NO. 3216 P1 0five2 4 2t 深圳市朋伴兴业科技有限公司 PBX3216MC02 Specification Operating Temp. : -40 ~+85°C°C 1.FEATURES: ●Light weight, compact ●Wide bandwidth, low cost ●Built-in antenna with high gain 2.APPLICATIONS: ●Bluetooth, Wireless LAN, Mobile TV ●Home RF System, etc 3.PRODUCT IDENTIFICATION C H I P 1 6 (1) (2) (3) (1)Product type: Multilayer chip Antenna (2)Center Frequency: 2450MHz (3)External Dimensions (L×W) (mm): 3.2*1.6 4.SHAPE AND DIMENSIONS: LWHA 3.2±0.21.6±0.20.52±0.10.4±0.1 UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝ A N G L E S ＝± H O L E D I A ＝± Shenzhen pengban xingye technology co., ltd SCALE：N/AUNIT：mm THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PBXY TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD TITLE：CHIP2450-3216 Specification DOCUMENT NO. 3216 SPEC REV. P1 深圳市朋伴兴业科技有限公司 Reference size of test board: Unit: mm UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝ A N G L E S ＝± H O L E D I A ＝± Shenzhen pengban xingye technology co., ltd SCALE：N/AUNIT：mm THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PBXY TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD SPEC REV. 深圳市朋伴兴业科技有限公司 TITLE：CHIP2450-3216 Specification DOCUMENT NO. 3216 P1 深圳市朋伴兴业科技有限公司 Punching reference diagram APPLICATION GUIDE 5.SPECIFICATIONS: * Test condition: Test board size 90*40 mm Matching circuit: Pi matching circuit will be required UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝ A N G L E S ＝± H O L E D I A ＝± Shenzhen pengban xingye technology co., ltd SCALE：N/AUNIT：mm THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PBXY TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD TITLE：CHIP2450-3216 Specification DOCUMENT NO. 3216 SPEC REV. P1 深圳市朋伴兴业科技有限公司 6.Electrical Characteristics : return loss standing-wave ratio MarkFrequencyVSWR one2400 MHz1.513 22440 MHz1.068 three2480 MHz1.464 UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝ A N G L E S ＝± H O L E D I A ＝± Shenzhen pengban xingye technology co., ltd SCALE：N/AUNIT：mm THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PBXY TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD TITLE：CHIP2450-3216 Specification DOCUMENT NO. 3216 SPEC REV. P1 深圳市朋伴兴业科技有限公司 Radiation Pattern The Gain pattern is measured in FAR-field chamber. DUT is placed on the table of rotator,a standard horn antenna and Vector Network Analyzer is used to collect data. Efficiency Maximum gain UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝ A N G L E S ＝± H O L E D I A ＝± Shenzhen pengban xingye technology co., ltd SCALE：N/AUNIT：mm THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PBXY TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD TITLE：CHIP2450-3216 Specification DOCUMENT NO. 3216 SPEC REV. P1 深圳市朋伴兴业科技有限公司 3D Gain Pattern (2400 MHz)◎ 3D Gain Pattern (2440 MHz)◎ 3D Gain Pattern (2480 MHz)◎ UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝ A N G L E S ＝± H O L E D I A ＝± Shenzhen pengban xingye technology co., ltd SCALE：N/AUNIT：mm THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PBXY TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD TITLE：CHIP2450-3216 Specification DOCUMENT NO. 3216 SPEC REV. P1 深圳市朋伴兴业科技有限公司 7.Environmental Characteristics (1)Reliability Test (2)Storage Condition (a)At warehouse: The temperature should be within 0 ~ 30 and humidity should be less than 60% RH.°C The product should be used within 1 year from the time of delivery. (b)On board: The temperature should be within -40~85 and humidity should be less than 85% RH.°C (3)Operating Temperature Range Operating temperature range : -40 to +105 .°C°C UNLESS OTHER SPECIFIED TOLERANCES ON： X＝± X.X＝± X.XX＝ A N G L E S ＝± H O L E D I A ＝± Shenzhen pengban xingye technology co., ltd SCALE：N/AUNIT：mm THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF PBXY TECHNOLOGY Limited AND SHALL NOT BE REPRODUCED OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES WITHOUT PERMISSION DRAWN BY : SeraCHECKED BY: XD DESIGNED BY: SeraAPPROVED BY: XD TITLE：CHIP2450-3216 Specification DOCUMENT NO. 3216 SPEC REV. P1 深圳市朋伴兴业科技有限公司 8.Recommended Reflow Soldering (1)Soldering Gun Procedure Note the follows, in case o…

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202403-0006-14 Page: 1 of 47 FCC ID: 2AMWY-H1 TB-RF-074-1.0 RF Test Data for Bluetooth(BR+EDR) (Conducted Measurements) General Description of EUT Product Name: Wireless Headphone Test Model: picun H1 Sample ID: RW-C-202403-0006-9-2# Environmental Conditions Temperature: 23.8°C Relative Humidity: 48% Test Voltage: DC 3.7V Test Engineer: ZKN ZHOU Note: For a more detailed features description, please refer to the report TBR-C-202403-0006-14 The report only show the worst case data. Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202403-0006-14 Page: 2 of 47 FCC ID: 2AMWY-H1 TB-RF-074-1.0 1. Duty Cycle Condition Mode Frequency (MHz) Antenna Duty Cycle (%) Correction Factor (dB) 1/T (kHz) NVNT 1-DH1 2402 Ant1 31.2 5.06 2.56 NVNT 1-DH1 2441 Ant1 30.4 5.17 2.63 NVNT 1-DH1 2480 Ant1 30.4 5.17 2.63 NVNT 2-DH1 2402 Ant1 31.2 5.06 2.56 NVNT 2-DH1 2441 Ant1 31.2 5.06 2.56 NVNT 2-DH1 2480 Ant1 32.0 4.95 2.50 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202403-0006-14 Page: 3 of 47 FCC ID: 2AMWY-H1 TB-RF-074-1.0 Test Graphs Duty Cycle NVNT 1-DH1 2402MHz Ant1 Duty Cycle NVNT 1-DH1 2441MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202403-0006-14 Page: 4 of 47 FCC ID: 2AMWY-H1 TB-RF-074-1.0 Duty Cycle NVNT 1-DH1 2480MHz Ant1 Duty Cycle NVNT 2-DH1 2402MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202403-0006-14 Page: 5 of 47 FCC ID: 2AMWY-H1 TB-RF-074-1.0 Duty Cycle NVNT 2-DH1 2441MHz Ant1 Duty Cycle NVNT 2-DH1 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202403-0006-14 Page: 6 of 47 FCC ID: 2AMWY-H1 TB-RF-074-1.0 2. Maximum Conducted Output Power Condition Mode Frequency (MHz) Antenna Conducted Power (dBm) Limit (dBm) Verdict NVNT 1-DH1 2402 Ant1 -8.238 21 Pass NVNT 1-DH1 2441 Ant1 -7.604 21 Pass NVNT 1-DH1 2480 Ant1 -7.345 21 Pass NVNT 2-DH1 2402 Ant1 -7.357 21 Pass NVNT 2-DH1 2441 Ant1 -6.771 21 Pass NVNT 2-DH1 2480 Ant1 -6.423 21 Pass Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202403-0006-14 Page: 7 of 47 FCC ID: 2AMWY-H1 TB-RF-074-1.0 Test Graphs Power NVNT 1-DH1 2402MHz Ant1 Power NVNT 1-DH1 2441MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202403-0006-14 Page: 8 of 47 FCC ID: 2AMWY-H1 TB-RF-074-1.0 Power NVNT 1-DH1 2480MHz Ant1 Power NVNT 2-DH1 2402MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202403-0006-14 Page: 9 of 47 FCC ID: 2AMWY-H1 TB-RF-074-1.0 Power NVNT 2-DH1 2441MHz Ant1 Power NVNT 2-DH1 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202403-0006-14 Page: 10 of 47 FCC ID: 2AMWY-H1 TB-RF-074-1.0 3. -20dB Bandwidth Condition Mode Frequency (MHz) Antenna -20 dB Bandwidth (MHz) Limit -20 dB Bandwidth (MHz) Verdict NVNT 1-DH1 2402 Ant1 0.87 ---- Pass NVNT 1-DH1 2441 Ant1 0.86 ---- Pass NVNT 1-DH1 2480 Ant1 0.86 ---- Pass NVNT 2-DH1 2402 Ant1 1.23 ---- Pass NVNT 2-DH1 2441 Ant1 1.23 ---- Pass NVNT 2-DH1 2480 Ant1 1.25 ---- Pass Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202403-0006-14 Page: 11 of 47 FCC ID: 2AMWY-H1 TB-RF-074-1.0 Test Graphs -20dB Bandwidth NVNT 1-DH1 2402MHz Ant1 -20dB Bandwidth NVNT 1-DH1 2441MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202403-0006-14 Page: 12 of 47 FCC ID: 2AMWY-H1 TB-RF-074-1.0 -20dB Bandwidth NVNT 1-DH1 2480MHz Ant1 -20dB Bandwidth NVNT 2-DH1 2402MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202403-0006-14 Page: 13 of 47 FCC ID: 2AMWY-H1 TB-RF-074-1.0 -20dB Bandwidth NVNT 2-DH1 2441MHz Ant1 -20dB Bandwidth NVNT 2-DH1 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202403-0006-14 Page: 14 of 47 FCC ID: 2AMWY-H1 TB-RF-074-1.0 4. Occupied Channel Bandwidth Condition Mode Frequency (MHz) Antenna 99% OBW (MHz) NVNT 1-DH1 2402 Ant1 0.820 NVNT 1-DH1 2441 Ant1 0.809 NVNT 1-DH1 2480 Ant1 0.815 NVNT 2-DH1 2402 Ant1 1.168 NVNT 2-DH1 2441 Ant1 1.166 NVNT 2-DH1 2480 Ant1 1.162 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-2…

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202403-0006-14 Page: 1 of 46 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 RF Test Report FCC ID: 2AMWY-H1 Report No. : TBR-C-202403-0006-14 Applicant : Shenzhen Pincun Digital Technology Co., Ltd. Equipment Under Test (EUT) EUT Name : Wireless Headphone Model No. : picun H1 Series Model No. : picun H1S, picun W2, picun QW-10, picun H2 Brand Name : Picun Sample ID : RW-C-202403-0006-9-1#&RW-C-202403-0006-9-2# Receipt Date : 2024-03-21 Test Date : 2024-03-21 to 2024-03-29 Issue Date : 2024-03-29 Standards : FCC Part 15 Subpart C 15.247 Test Method : ANSI C63.10:2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above. Tested By : ZKN ZHOU Reviewed By : Wade. Lv Approved By : Ivan Su This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TBR-C-202403-0006-14 Page: 2 of 46 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT.............................................................................. 6 1.1 Client Information ................................................................................................................. 6 1.2 General Description of EUT (Equipment Under Test) ................................................... 6 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 9 1.4 Description of Support Units .............................................................................................. 9 1.5 Description of Test Mode .................................................................................................. 10 1.6 Description of Test Software Setting .............................................................................. 11 1.7 Measurement Uncertainty ................................................................................................ 11 1.8 Test Facility ......................................................................................................................... 12 2. TEST SUMMARY ..................................................................................................................... 13 3. TEST SOFTWARE ................................................................................................................... 13 4. TEST EQUIPMENT AND TEST SITE ................................................................................... 14 5. CONDUCTED EMISSION ....................................................................................................... 16 5.1 Test Standard and Limit .................................................................................................... 16 5.2 Test Setup ........................................................................................................................... 16 5.3 Test Procedure ................................................................................................................... 16 5.4 Deviation From Test Standard ......................................................................................... 17 5.5 EUT Operating Mode ........................................................................................................ 17 5.6 Test Data ............................................................................................................................. 17 6. RADIATED AND CONDUCTED UNWANTED EMISSIONS ............................................ 18 6.1 Test Standard and Limit .................................................................................................... 18 6.2 Test Setup ........................................................................................................................... 20 6.3 Test Procedure ................................................................................................................... 21 6.4 Deviation From Test Standard ......................................................................................... 22 6.5 EUT Operating Mode ........................................................................................................ 22 6.6 Test Data ............................................................................................................................. 22 7. EMISSIONS IN RESTRICTED BANDS ............................................................................... 23 7.1 Test Standard and Limit .................................................................................................... 23 7.2 Test Setup ........................................................................................................................... 23 7.3 Test Procedure ................................................................................................................... 24 7.4 Deviation From Test Standard ......................................................................................... 25 Report No.: TBR-C-202403-0006-14 Page: 3 of 46 TB-RF-074-1.0 7.5 EUT Operating Mode ........................................................................................................ 25 7.6 Test Data ............................................................................................................................. 25 8. 99% OCCUPIED AND 20DB BANDWIDTH ........................................................................ 26 8.1 Test Standard and Limit ....................................…

Text truncated - open the document above for the full version.

FCC ID: 2AMWY-H1 TB-RF-074-1.0 Appendix V EUT Test Photographs Photo of Setup for Radiated Emission (Below 1 GHz) Photo of Setup for Radiated Emission (Above 1 GHz) FCC ID: 2AMWY-H1 TB-RF-074-1.0 Photo of Setup for Radiated Emission (Above 1 GHz) Photo of Setup for Conducted Emission -----END OF THE REPORT-----