2AMZY-98420PowerLynx

PowerLynx Power Bank and Wireless Charger Specications - Battery Capacity: 5000mAh - USB-C Input: 5V/2A - Built in USB-C Cable Input: 5V/2.4A - Built in USB-C Cable Output: 5V/2.4A - Wireless Output Phone: 5W - Wireless Output Watch: 2.5W - Wireless Output Earbuds: 3W - Phone Stand - Digital Display Product Overview 1. Magnetic charging area 2. Watch charging area 3. USB-C port 4. Power button 5. Built-in USB-C cable 6. Hidden phone stand 7. Digital battery display 8. Wireless charging indicator Included in box - Instruction manual - USB-A to USB-C charging cable How To Use - To view the battery percentage of the power bank, press the power button and view the digital display. - To turn o the power bank, quickly double press the power button. - To recharge the power bank, plug one end of the provided charging cable into the power bank and the other end into a proper power source. - To charge your phone, plug one end of the built in USB-C cable into your phone and check the power is on. - Alternativly, place the back of your phone on the wireless charging surface of the power bank. - To charge your earbuds, press the power button to turn the power bank on and place your earbuds on the wireless charging surface. - To charge your watch, press the power button to turn the power bank on and place your watch on the wiress charging surface. Safety Precautions 1. Do not disassemble product 2. Avoid dropping or crushing product 3. Always use appropriate power source 4. Use power adapter with an output between 5V-5.5V 5. The supplier assumes no responsibility for any damages that occure from improper use of this product 6. Do not dispose in re or water 7. Store in a cool dry place fully charged 8. This product is not intended for children 9. Stop using this product if any abnormalities occur such as swelling, strange smell, discoloration, or change in shape 10. Do not put excessive force on power cable 11. Product may become warm during charging, this is normal 12. If product becomes too hot to the touch, stop charging immediately and allow product to cool down 13. Do not over charge product 14. Please only use provided accessories for this product 15. Please recycle this product according to your local and environmental regulations 16. Attachments on the back of your phone or some phone cases can impede the eectiveness of the wireless charger and can lead to overheating. 17. Remove these attachements before wirelessly charging FCC Caution Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. HandStandsPromo LLC 1770 South 5350 West Suite 100 Salt Lake City, UT 84104 USA (801) 727 - 1400 www.hpgbrands.com/origaudio

HandStandsPromo LLC 2023.09.20 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for FCC ID: 2AMZY-98420 HandStandsPromo LLC certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Applicant signature: Applicant printed name: Stefan Leimer HandStandsPromo LLC 2023.09.20 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for FCC ID: 2AMZY-98420 HandStandsPromo LLC certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Applicant signature: Applicant printed name: Stefan Leimer

HandStandsPromo LLC U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oaldand Mills Road Columbia, MD 21046, USA ATTENTION: FCC Certification 一Section2.9ll(d)(7) Information Desi1ma优d U.S.A!!ent Company Name: HandStandsPrcmo LLC FRN: 0026687244 C口ntactName: Stefan Leimer .; Address: 1770 South 5350 we时Suite100 Sal!'Lak占City Utah 84104 USA Telephone No: 8017271416 l Email: sl臼[email protected] This letter is to confirm that we (HandStandsPromo LLC) have accepted the responsibility to act as the Designated U.S. Agent岛r Service of Process as requir它dby section 47 CFR 2.91l(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: Date: 2024.09.20 Signed by (Printed Name/Title): Stefan Leimer The Applicant aclmowledges that they must maintain an agent for no less than one year after tenninating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant如此heracknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent infonnation above changes. Applicant Company name: HandStandsPromo LLC FRN: 0026687244 FCC ID: 2AMZY】98420 Contact Name: Stefan Leimer Address: 1770 South 5350 west Suite 100 Salt Lake City Utah 84104 USA Telephone No: 8017271416 Email: [email protected] Applicant Signature: Date: 2024.09.20 价＜JvlU1」／ Signed by (Printed Name Title): Stefan Leimer 价＜Jvl U1」／

HandStandsPromo LLC 2024.09.20 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR EUT NAME: PowerLynx MODEL: X9842001007 FCC ID: 2AMZY-98420 To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - Block Diagram - Schematics - Operational Description required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Client’s signature: Client’s name / title: Stefan Leimer Contact information / address: 1770 South 5350 west Suite 100 Salt Lake City Utah 84104 USA

HandStandsPromo LLC 2024.09.20 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen BCTC Testing Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Client’s signature: Client’s name / title: Stefan Leimer Contact information / address: 1770 South 5350 west Suite 100 Salt Lake City Utah 84104 USA

External Photos

10*5mm FCC ID: 2AMZY-98420

Internal Photos Antenna Antenna

No.：BCTC/RF-EMC-005 Page 1 of 16 Edition：B.2 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2409871519-2E Applicant: HandStandsPromo LLC Product Name: PowerLynx Test Model: X9842001007 Tested Date: 2024-09-03 to 2024-09-11 Issued Date: 2024-09-12 Report No.: BCTC2409871519-2E No.：BCTC/RF-EMC-005 Page 2 of 16 Edition：B.2 FCC ID: 2AMZY-98420 The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. Product Name: PowerLynx Trademark: N/A Model/Type reference: X9842001007 Prepared For: HandStandsPromo LLC Address: 1770 South 5350 west Suite 100 Salt Lake City Utah 84104 USA Manufacturer: HandStandsPromo LLC Address: 1770 South 5350 west Suite 100 Salt Lake City Utah 84104 USA Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: 2024-09-02 Sample tested Date: 2024-09-03 to 2024-09-11 Issue Date: 2024-09-12 Report No.: BCTC2409871519-2E Test Standards: FCC CFR 47 part1, 1.1307(b), 1.1310 KDB 680106 D01 Wireless Power Transfer v04 Test Results: PASS Tested by: Approved by: Eric Yang/Project Handler Zero Zhou/Reviewer Report No.: BCTC2409871519-2E No.：BCTC/RF-EMC-005 Page 3 of 16 Edition：B.2 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 4 2. Product Information ............................................................................................... 5 2.1 Product Information ............................................................................................... 5 2.2 Support Equipment ............................................................................................... 5 2.3 Test Mode ............................................................................................................. 5 3. Test Facility And Test Instrument Used ................................................................. 7 3.1 Test Facility ........................................................................................................... 7 3.2 Test Instrument Used ............................................................................................ 7 4. Method Of Measurement ....................................................................................... 8 4.1 Applicable Standard .............................................................................................. 8 4.2 Block Diagram Of Test Setup ................................................................................ 8 4.3 Limit ...................................................................................................................... 9 4.4 Test procedure ...................................................................................................... 9 4.5 Equipment Approval Considerations ................................................................... 10 4.6 E and H field Strength ......................................................................................... 11 5. Photographs Of Test Set-Up ............................................................................... 15 (Note: N/A Means Not Applicable) Report No.: BCTC2409871519-2E No.：BCTC/RF-EMC-005 Page 4 of 16 Edition：B.2 1. Version Report No. Issue Date Description Approved BCTC2409871519-2E 2024-09-12 Original Valid Report No.: BCTC2409871519-2E No.：BCTC/RF-EMC-005 Page 5 of 16 Edition：B.2 2. Product Information 2.1 Product Information Model/Type Ref.: X9842001007 Model differences: N/A Modulation: MSK Operation Frequency: 115kHz-220kHz(Phone, Earbuds) 300kHz-360kHz(IWATCH) Antenna installation: loop coil antenna Ratings: DC 3.7V From Battery USB Input: DC 5V/2A USB Ouput: DC 5V/2A Wireless Charging Output: 5W(Phone), 3W(Earbuds) Wireless Charging Output: 2.5W(IWATCH) 2.2 Support Equipment Device Type Brand Model Series No. Note Dummy load N/A DL01 N/A Auxiliary Adapter N/A CD226 N/A Auxiliary Notes: 1. All the equipment/cables were placed in the worst-case configuration to maximize the emission during the test. 2. Grounding was established in accordance with the manufacturer’s requirements and conditions for the intended use. 2.3 Test Mode AC adapter Mode Test Mode 1 AC Charging+ Wireless Charging+ Full load(5W(Phone) Test Mode 2 AC Charging+ Wireless Charging+ Half-load(5W(Phone) Test Mode 3 AC Charging+ Wireless Charging+ Null load(5W(Phone) Test Mode 4 AC Charging+ Wireless Charging+ Full load(3W(Earbuds) Test Mode 5 AC Charging+ Wireless Charging+ Half-load(3W(Earbuds) Test Mode 6 AC Charging+ Wireless Charging+ Null load(3W(Earbuds) Test Mode 7 AC Charging+ Wireless Charging+ Full load(2.5W(IWATCH) Test Mode 8 AC Charging+ Wireless Charging+ Half-load(2.5W(IWATCH) Test Mode 9 AC Charging+ Wireless Charging+ Null load(2.5W(IWATCH) Test Mode 10 AC Charging+ Wireless Charging+ Full load(5W(Phone)+(2.5W(IWATCH) * Test Mode 11 AC Charging+ Wireless Charging+ Half-load(5W(Phone)+(2.5W(IWATCH) Test Mode 12 AC Charging+ Wireless Charging+ Null load(5W(Phone)+(2.5W(IWATCH) Test Mode 13 AC Charging+ Wireless Charging+ Full load(3W(Earbuds)+ (2.5W(IWATCH) Test Mode 14 AC Charging+ Wireless Charging+ Half-load(3W(Earbuds)+(2.5W(IWATCH) Test Mode 15 AC Charging+ Wireless Charging+ Null load(3W(Earbuds)+ (2.5W(IWATCH) Battery Mode Test Mode 16 Wireless Charging+ Full load(5W(Phone) Test Mode 17 Wireless Charging+ Half-load(5W(Phone) Test Mode 18 Wireless Charging+ Null load(5W(Phone) Test Mode 19 Wireless Charging+ Full load(3W(Earbuds) Report No.: BCTC2409871519-2E No.：BCTC/RF-EMC-005 Page 6 of 16 Edition：B.2 Test Mode 20 Wireless Charging+ Half-l…

Text truncated - open the document above for the full version.

specification Specificatio n number 202408028001 availability date 2024/8/28 customer name Ai small electricity product type 25 Watch hard magnetic coil Top wisdom material number DZ-RC25-K6.5-L8MM Customer material number [□√ New version release, □ version revision] [This specification contains a total of 3 pages] [RoHS Compli antParts] authorized strength examine and verify ratify The clock to establish / Ma Xiangping Guangdong Dingzhi Electronic Technology Co., LTD Factory Address: 1st Floor, No.1231, Yingbin Avenue, Longmen County, Huizhou City, Guangdong Province Tel.: 13147097490 This acceptance shall be returned within 30 days of receipt by the customer, and shall be deemed to be according to the standard of this acceptance. [Customer Approval] Date: Admission status: □ fully recognizes □ conditional admission □ refused to admit ratify examine and verify recheck check up explain: specification customer name Ai small electricity Customer material number 0 Top wisdom material number DZ- RC25-K6.5-L8 MM Specificati on number 202408028001 Issue / Revision Records editio n availability date Change the content / reason approval 01 2024/8/28 New specifications issued Ma Xiangping specification customer name Ai small electricity Customer material number 0 Top wisdom material number DZ-RC25-K6.5-L8MM Specificatio n number 202408028001 edition 01 ♦, outline dimension (unit:mm) A 7.6±1.0 B 14.5±1.0 C 20.7±1.0 D 25.0±1.0 E 9.7±1.0 K 8.0±2.0 H 2.6 ± 0.3 (with film thickness) remarks (1) Line diameter: 0.08 * 24P strand, single line and double layer winding method (2) The coil is circled for 12 times (3) Add back glue at the bottom (4) Whether the starting and tail line crosses: yes (5) The middle of the coil placed N52-7.5 * 2.2 of the strong magnetic, 2800- - -3200 GS ♦, electrical character: parameter specifications test condition measuring and test instruments L(W1) 6.5±10%μH 100KHz/1V ■TH2816B■ CH- 502BC■TH 1816B DCR(W1) <200mΩ @25°C Q >20 min 100KHz/1V ♦, temperature grade: service temperature -40°C~125°C ♦, bill of material: order number name of a part material specification supplier remarks 1 magneti c sheet 25 * 2.5 hard magnetic 2 strande d conduct 0.08*24P stranded conductor or 3 glue double faced adhesive tape Environmental rubber paper 4 N52 strong magnetic 7.5*2.2 magnet 5 tin 107H Thousand island environmental protection tin 6 glue Yellow gum Environmental glue

specification Specificatio n number 202408024001 availability date 2024/8/24 customer name Ai small electricity product type coil Top wisdom material number TX-DZ43.505.3006-K6.5-L40 Open the double groove Customer material number [□√√ New version release, □ version revision] [This specification contains 7 pages of the directory] [RoH S CompliantParts] authorized strength examine and verify ratify The clock to establish / Ma Xiangping Guangdong Dingzhi Electronic Technology Co., LTD Factory Address: 1st Floor, No.1231, Yingbin Avenue, Longmen County, Huizhou City, Guangdong Province Tel.: 13147097490 This acceptance must be returned within 30 days of receipt by the customer, which shall be deemed to be executed according to the standard of this acceptance. [Customer Approval] Date: Admission status: □ fully acknowledged □ conditional recognition □ refused to admit ratify examine and verify recheck check up explain: specification customer name Ai small electricity Customer material number Top wisdom material number TX-DZ43.505.3006-K6.5-L40 open double groove Specificati on number 202408024001 Issue / Revision Records editio n availability date Change the content / reason approval 01 2024/8/24 New specifications issued Ma Xiangping authorized strength examine and verify ratify The clock to establish / Ma Xiangping specification customer name Ai small electricity Customer material number Top wisdom material number TX-DZ43.505.3006-K6.5-L40 open double groove Specificati on number 202408024001 edition 01 ♦, outline dimension (unit:mm) A 5.3±1.5 B 20.5±1.5 C 38.5±1.5 D 43.5±1.5 E 43.0±1.5 F 40.0±2.0 H 1.7±0.3 I 0.60 ± 0.1 (magnetic chip thickness) (1) Line diameter: 0.08 * (24 * 2P) enameled wire (2) Number of winding coil: 10TS (3) Whether the starting and tail line crosses: yes (4) Coil wrap 4mm wide high temperature tape (5) The coil and the magnetic film should be pasted in the center (6) Magnetic film back 42 round white glue ♦, electrical character: parameter specifications test condition measurin g and test instrume nts L0 6.5±10%μH 100KHz/1V ■ TH1816B ■ TH1816B ■ CH-502 BC Q >30 min 100KHz/1V DCR <95mΩ @25°C ♦, temperature grade: service temperatur e -40°C~125°C ♦, bill of material: order number name of a part material specification supplier remar ks 1 magnet ic sheet 43.5*5.3*0.6T Open the double groove PC40 fierce zinc 2 copper line 0.08*（24*2P） varnis hed wire 3 High temperat ure tape 4MM Environment al protection tape 4 glue 42 Round white glue Environment al rubber paper 5 tin 107H Thousand island environmenta l protection tin 6 glue Yellow gum Environment al glue authorized strength examine and verify ratify The clock to establish / Ma Xiangping

No.：BCTC/RF-EMC-005 Page 1 of 31 Edition：B.2 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2409871519-1E Applicant: HandStandsPromo LLC Product Name: PowerLynx Test Model: X9842001007 Tested Date: 2024-09-03 to 2024-09-11 Issued Date: 2024-09-12 Report No.: BCTC2409871519-1E No.：BCTC/RF-EMC-005 Page 2 of 31 Edition：B.2 FCC ID: 2AMZY-98420 The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. Product Name: PowerLynx Trademark: N/A Model/Type Ref.: X9842001007 Prepared For: HandStandsPromo LLC Address: 1770 South 5350 west Suite 100 Salt Lake City Utah 84104 USA Manufacturer: HandStandsPromo LLC Address: 1770 South 5350 west Suite 100 Salt Lake City Utah 84104 USA Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: 2024-09-02 Sample tested Date: 2024-09-03 to 2024-09-11 Issue Date: 2024-09-12 Report No.: BCTC2409871519-1E Test Standards: FCC Part15.209 ANSI C63.10-2013 Test Results: PASS Tested by: Approved by: Eric Yang/Project Handler Zero Zhou/Reviewer Report No.: BCTC2409871519-1E No.：BCTC/RF-EMC-005 Page 3 of 31 Edition：B.2 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 4 2. Test Summary ....................................................................................................... 5 3. Measurement Uncertainty ..................................................................................... 6 4. Product Information And Test Setup ..................................................................... 7 4.1 Product Information ............................................................................................... 7 4.2 Support Equipment ............................................................................................... 7 4.3 Test Setup Configuration ...................................................................................... 8 4.4 Test Mode ............................................................................................................. 8 5. Test Facility And Test Instrument Used ............................................................... 10 5.1 Test Facility ......................................................................................................... 10 5.2 Test Instrument Used .......................................................................................... 10 6. Conducted Emissions .......................................................................................... 12 6.1 Block Diagram Of Test Setup .............................................................................. 12 6.2 Limit .................................................................................................................... 12 6.3 Test Procedure ................................................................................................... 12 6.4 EUT Operating Conditions .................................................................................. 12 6.5 Test Result .......................................................................................................... 13 7. Radiated Emissions ............................................................................................. 15 7.1 Block Diagram Of Test Setup .............................................................................. 15 7.2 Limit .................................................................................................................... 16 7.3 Test Procedure ................................................................................................... 16 7.4 Test Result .......................................................................................................... 17 8. Bandwidth Test .................................................................................................... 24 8.1 Test Procedure ................................................................................................... 24 8.2 Test Setup ........................................................................................................... 24 8.3 Test Result .......................................................................................................... 25 9. Antenna Requirements ........................................................................................ 27 10. EUT Photographs ................................................................................................ 28 11. EUT Test Setup Photographs.............................................................................. 29 (Note: N/A Means Not Applicable) Report No.: BCTC2409871519-1E No.：BCTC/RF-EMC-005 Page 4 of 31 Edition：B.2 1. Version Report No. Issue Date Description Approved BCTC2409871519-1E 2024-09-12 Original Valid Report No.: BCTC2409871519-1E No.：BCTC/RF-EMC-005 Page 5 of 31 Edition：B.2 2. Test Summary The Product has been tested according to the following specifications: No. Test Parameter Clause No Results 1 Conducted Emission 15.207 PASS 2 Radiated Emission 15.209 PASS 3 20dB Bandwidth 15.215 PASS 4 Antenna Requirement 15.203 PASS Report No.: BCTC2409871519-1E No.：BCTC/RF-EMC-005 Page 6 of 31 Edition：B.2 3. Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the Product as specified in CISPR 16-4-2. This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. No. Item Uncertainty 1 3m chamber Rad…

Text truncated - open the document above for the full version.

Conducted Emissions Photo Radiated Measurement Photos 9kHz-30MHz 30MHz-1GHz