2AN4Y-FG6Wearable Air Conditioner

FCC Warning 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC RF Radiation Exposure Statement: 1.This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2.This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 5mm between the radiator and your body.

SHENZHEN TORRAS TECHNOLOGY CO., LTD. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: SHENZHEN TORRAS TECHNOLOGY CO., LTD. Address: RM1215, BLK C, Zhantao Technology BLDG, Minzhi Avenue, Minzhi ST, Longhua DIST, Shenzhen, China Product Name: Wearable Air Conditioner FCC ID: 2AN4Y-FG6 Model(s): FG6 2.911(d)(5)(i) Equipment Type We, [SHENZHEN TORRAS TECHNOLOGY CO., LTD. ] (“the applicant”) certify that the equipment for which authorization is sought through certification is not: • Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. • Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Earl Zhu Date: 2023-0 4-0 4 Title and Company name: Compliance Engineer NOTE 1 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

SHENZHEN TORRAS TECHNOLOGY CO., LTD. 2.911 (d)(5)(ii) Applicant Attestation v1.2 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: SHENZHEN TORRAS TECHNOLOGY CO., LTD. Address: RM1215, BLK C, Zhantao Technology BLDG, Minzhi Avenue, Minzhi ST, Longhua DIST, Shenzhen, China Product Name: Wearable Air Conditioner FCC ID: 2AN4Y-FG6 Model(s): FG6 2.911(d)(5)(ii) Applicant filing We, [SHENZHEN TORRAS TECHNOLOGY CO., LTD. ] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Earl Zhu Date: 2023-04-04 Title and Company name: Compliance Engineer NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

SHENZHEN TORRAS TECHNOLOGY CO., LTD. 2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process Company name: SHENZHEN TORRAS TECHNOLOGY CO., LTD. Address: RM1215, BLK C, Zhantao Technology BLDG, Minzhi Avenue, Minzhi ST, Longhua DIST, Shenzhen, China Product Name: Wearable Air Conditioner FCC ID: 2AN4Y-FG6 Model(s): FG6 2.911(d)(7) USA Designated Agent for Service of Process We, [SHENZHEN TORRAS TECHNOLOGY CO., LTD. ] (“the applicant”) designate [THREE STONES MEDIA LLC ] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: THREE STONES MEDIA LLC Address: 1200 Broadway St. APT 329, Los Angeles, CA90015 FRN: 0033401761 FCC Grantee Code: 2A99E Contact Name: Sijie Zhang Telephone No: +1 267 909 3692 Email: [email protected] Applicant Company name: SHENZHEN TORRAS TECHNOLOGY C O. , LT D. Address: RM1215, BLK C, Zhantao Technology BLDG, Minzhi Avenue, Minzhi ST, Longhua DIST, Shenzhen, China FRN: 0026945204 FCC Grantee Code: 2AN4Y Contact Name: Earl Zhu Telephone No: +86 150 1922 4926 Email: [email protected] SHENZHEN TORRAS TECHNOLOGY CO., LTD. 2. 911 (d)(7)USA Agent v1.2 S ignature: Title: Manager S ignature: Title: Compliance Engineer Date: 2023-04-06 Date: 2023-04-06 N OTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-t o- the-communications-supply-chain-through-the

Agent Authorization Company: SHENZHEN TORRAS TECHNOLOGY CO., LTD. Address: RM1215, BLK C, Zhantao Technology BLDG, Minzhi Avenue, Minzhi ST, Longhua DIST, Shenzhen, China Product Name: Wearable Air Conditioner Model Number(s): FG6 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2023-04-04 Name: Earl Zhu Title: Compliance Engineer

SHENZHEN TORRAS TECHNOLOGY CO., LTD. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023-04-04 Subject; Request for Long Term Confidentiality FCC ID: 2AN4Y-FG6 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram BOM Operational Description It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Earl Zhu Title: Compliance Engineer

Test Report Number: BTF230328R01301 External Test Report Number: BTF230328R01301 Test Report Number: BTF230328R01301 Test Report Number: BTF230328R01301

Test Report Number: BTF230328R01301 Internal Test Report Number: BTF230328R01301 Test Report Number: BTF230328R01301 Test Report Number: BTF230328R01301 Test Report Number: BTF230328R01301 Test Report Number: BTF230328R01301

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China RF Exposure Report For Applicant Name: SHENZHEN TORRAS TECHNOLOGY CO., LTD. Address: RM1215, BLK C, Zhantao Technology BLDG, Minzhi Avenue, Minzhi ST, Longhua DIST, Shenzhen, China EUT Name: Wearable Air Conditioner Brand Name: TORRAS Model Number: FG6 Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF230328R01302 Test Standards: 47 CFR Part 2 Subpart J Section 2.1093 FCC ID: 2AN4Y-FG6 Test Conclusion: Pass Test Date: 2023-03-28 to 2023-03-31 Date of Issue: 2023-03-31 Prepared By: Chris Liu/ Project Engineer Date: 2023-03-31 Approved By: Ryan.CJ / EMC Manager Date: 2023-03-31 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number: BTF230328R01302 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2023-03-31 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number: BTF230328R01302 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1. Introduction .............................................................................................................................................................................................. 4 1.1 Identification of Testing Laboratory ................................................................................................................................... 4 1.2 Identification of the Responsible Testing Location ....................................................................................................... 4 1.3 Laboratory Condition ............................................................................................................................................................. 4 1.4 Announcement ......................................................................................................................................................................... 4 2. Product Information ................................................................................................................................................................................ 5 2.1 Application Information ......................................................................................................................................................... 5 2.2 Manufacturer Information ..................................................................................................................................................... 5 2.3 Factory Information ................................................................................................................................................................ 5 2.4 General Description of Equipment under Test (EUT).................................................................................................... 5 3. Test Requirement ................................................................................................................................................................................... 6 3.1 Assessment Result ................................................................................................................................................................. 6 Test Report Number: BTF230328R01302 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 4 of 7 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China 1. Introduction 1.1 Identification of Testing Laboratory Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Phone Number: +86-0755-23146130 Fax Number: +86-0755-23146130 1.2 Identification of the Responsible Testing Location Test Location: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Description: All measurement facilities used to collect the measurement data are located at F101,201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China FCC Registration Number: 518915 Designation Number: CN1330 1.3 Laboratory Condition Ambient Temperature: 20°C to 25°C Ambient Relative Humidity: 45% to 55% Ambient Pressure: 100 kPa to 102 kPa 1.4 Announcement (1) The test report reference to the report template version v0. (2) The test report is invalid if not marked with the signatures of the persons responsible for preparing, reviewing and approving the test report. (3) The test repor…

Text truncated - open the document above for the full version.

SHENZHENB&TTECHNOLOGYCo.,Ltd ZHONGSHANB&TTECHNOLOGYCo.,Ltd -1- SPECIFICATIONFORAPPROVAL CUST OMER：Shenzhen Ai-Thinker Technology Co., Ltd CUS PART NO:PB-03 PART NAME:2.4G WLAN Antenna Edition：1.0 EditorYuan Nannan2021/12/13 VerifierGuan Ning2021/12/13 ApproverXu Fuqiang2021/12/13 SHENZHENB&TTECHNOLOGYCo.,Ltd ZHONGSHANB&TTECHNOLOGYCo.,Ltd Address: 3-4/F, Building A, Dongfang Industrial Park, Nanlang Town, Zhongshan City, Guangdong Province, China SHENZHENB&TTECHNOLOGYCo.,Ltd ZHONGSHANB&TTECHNOLOGYCo.,Ltd -2- Directory 1、Performance parameter .................................................................3 2、 VSWR ...................................................................................4 3 、 Passive test data ....................................................................4 4、 Radiation pattern .....................................................................5 SHENZHENB&TTECHNOLOGYCo.,Ltd ZHONGSHANB&TTECHNOLOGYCo.,Ltd -3- Productspecification 1、 Performance parameter Name2.4G WLAN Antenna Model TypePCB Print Antenna ELECTRICAL SPECTFICATIONS Frenquency Range2400-2500MHz Band Width100MHz Impedance50Ω VSWR< 2.0 Max Gain2.56dBi PolarizationVertical/Horizontal RadiationOmnidirectional Power50 W MECHANICAL SPECTFICATIONS ConnectorWelding type Working Temperature-40°C - + 85°C Limit Temperature-40°C - + 125°C SHENZHENB&TTECHNOLOGYCo.,Ltd ZHONGSHANB&TTECHNOLOGYCo.,Ltd -4- 2、VSWR 3、Passive test data: Frequency (MHz) 2400 2410 2420 2430 2440 2450 2460 2470 2480 2490 2500 Gain (dBi)1.952.101.962.112.042.282.302.392.352.562.36 Efficiency (%)54.5156.6955.3457.6256.2058.5658.0758.3256.8859.1556.37 SHENZHENB&TTECHNOLOGYCo.,Ltd ZHONGSHANB&TTECHNOLOGYCo.,Ltd -5- 4、Radiation pattern 2400MHz 2450MHz 2500MHz

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 76 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China RF Test Report For Applicant Name: SHENZHEN TORRAS TECHNOLOGY CO., LTD. Address: RM1215, BLK C, Zhantao Technology BLDG, Minzhi Avenue, Minzhi ST, Longhua DIST, Shenzhen, China EUT Name: Wearable Air Conditioner Brand Name: TORRAS Model Number: FG6 Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF230328R01301 Test Standards: 47 CFR Part 15.247 Test Conclusion: Pass FCC ID: 2AN4Y-FG6 Test Date: 2023-03-28 to 2023-03-31 Date of Issue: 2023-03-31 Prepared By: Chris Liu / Project Engineer Date: 2023-03-31 Approved By: Ryan.CJ / EMC Manager Date: 2023-03-31 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number: BTF230328R01301 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 76 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2023-03-31 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number: BTF230328R01301 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 76 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1 INTRODUCTION...................................................................................................................................... 5 1.1 Identification of Testing Laboratory ............................................................................................ 5 1.2 Identification of the Responsible Testing Location ................................................................... 5 1.3 Announcement ............................................................................................................................. 5 2 PRODUCT INFORMATION...................................................................................................................... 6 2.1 Application Information ............................................................................................................... 6 2.2 Manufacturer Information ............................................................................................................ 6 2.3 Factory Information ..................................................................................................................... 6 2.4 General Description of Equipment under Test (EUT) ................................................................ 6 2.5 Technical Information .................................................................................................................. 6 3 SUMMARY OF TEST RESULTS.............................................................................................................. 7 3.1 Test Standards ............................................................................................................................. 7 3.2 Uncertainty of Test ....................................................................................................................... 7 3.3 Summary of Test Result .............................................................................................................. 7 4 TEST CONFIGURATION ......................................................................................................................... 8 4.1 Test Equipment List ..................................................................................................................... 8 4.2 Test Auxiliary Equipment ........................................................................................................... 12 4.3 Test Modes ................................................................................................................................. 12 5 EVALUATION RESULTS (EVALUATION) ............................................................................................. 13 5.1 Antenna requirement ................................................................................................................. 13 5.1.1 Conclusion: ....................................................................................................................... 13 6 RADIO SPECTRUM MATTER TEST RESULTS (RF) ............................................................................ 14 6.1 Conducted Emission at AC power line ..................................................................................... 14 6.1.1 E.U.T. Operation: .............................................................................................................. 14 6.1.2 Test Setup Diagram: ......................................................................................................... 14 6.1.3 Test Data: ......................................................................................................................... 15 6.2 Occupied Bandwidth.................................................................................................................. 17 6.2.1 E.U.T. Operatio…

Text truncated - open the document above for the full version.

Test Report Number: BTF230328R01301 RF conducted test setup RF radiated test setup below 1GHz Test Report Number: BTF230328R01301 above 1GHz Conducted emissions on AC mains