2AN4Y-PB-P051-01MagStall Power Bank

The parameters above are derived from the laboratory of TORRAS. The actual parameters would be different due to production process and other factors. The image shown here is indicative only. The first, second and third white lights off, and the fourth white light flashing The first and second white lights off, the third white light flashing, and the fourth white light always on The first white light off, the second white light flashing, and the third and fourth white lights always on The first white light flashing, and the second, third and fourth white lights always on The four white lighst always on 0-25% 25%-50% 50%-75% 75%-99% 100% 1. When charging the power bank LED Display Instruction PowerDisplay Instruction 2. When the power bank charges the devices 75%-50% 50%-25% 25%-5% 5%-1% 0% The first white light off, and the second, third and fourth white lights always on The first and second white lights off, the third and fourth white light always on The first, second and third white lights off, and the fourth white light always on The first, second and third white lights off, and the fourth white light flashing Note: When the wireless charging output is abnormal or a foreign object (FOD) is detected, the blue light of the wireless charging indicator will continue to flash 10s, and it will recover within 2 seconds after it is removed. Battery Indicator Status Erste, zweite und dritte weiße LED erlöschen, vierte weiße LED blinkt Erste und zweite weiße LED erlöschen, dritte weiße LED blinkt, vierte weiße LED leuchtet konstant Erste weiße LED erlischt, zweite weiße LED blinkt, dritte und vierte weiße LED leuchten konstant Erste weiße LED blinkt, zweite, dritte und vierte weiße LED leuchten konstant Vier weiße LEDs leuchten konstant 0-25% 25%-50% 50%-75% 75%-99% 100% 1. Beim Aufladen der Powerbank Anzeigeleuchten-Erklärung Batteriestand Erklärung Anzeigenleucht- en-Status Batteriestand Erklärung Anzeigenleucht- en-Status PowerDisplay Instruction Battery Indicator Status Four white lights always on Four white lights off 1. Please use the original or certified charging cable. 2. Do not touch liquid. 3. Do not disassemble or modify by yourself. 4. Avoid dropping the product. 5. Avoid using it in high or low temperature environment. 6. Do not use the power bank after being immersed in water. 7. Please keep this product out of reach of children. 8. When using a charger for power supply, please purchase or use a charger that has obtained citification and meets the standard requirements. Attentions 1. Please store this product in a cool and dry place. 2. Do not store this product in high-temperature or humid environment. 3. Using a power source or charger not recommended or sold by the product manufacturer may result in fire or personal injury. 4. Do not disassemble the product. When service or repair is required, please refer it to professional service personnel. Incorrect reassembly could result in fire or personal injury. 5. If the product is not used for a long time, please charge and discharge it at least once every three months. 6. When charging the device, the product may heat up. This is normal and should not be cause for concern. 7. Under normal circumstances, battery performance will decline within a few years. 8. Do not put the product in high temperature environment or fire. 9. Do not use harmful chemicals or detergents to clean this product. 10. Misuse, drop or excessive force may cause damage to the product. Safety Significant Matters 1. Bewahren Sie das Produkt an einem kühlen und trockenen Ort auf. 2. Bewahren Sie das Produkt nicht in heißer oder feuchter Umgebung auf. 3. Das Verwenden von Netzteil oder Ladegerät, die nicht vom Hersteller des Produkts empfohlen oder verkauft werden, kann Brände oder Verletzungen verursachen. 4. Zerlegen Sie das Produkt nicht. Wenn Reparaturen notwendig sind, überlassen Sie diese einem Fachmann. Fehlende Wiederzusammenbau kann zu Bränden oder Verletzungen führen. 5. Wenn das Produkt über längere Zeit nicht verwendet wird, laden Sie es mindestens alle drei Monate auf und entladen Sie es. 6. Während des Aufladens des Geräts kann das Produkt warm werden. Das ist normal, machen Sie sich keine Sorgen. 7. Die Leistung des Akkus nimmt im Laufe der Zeit ab. 8. Platzieren Sie das Produkt nicht in heißer Umgebung oder in der Nähe von Feuer. 9. Verwenden Sie keine schädlichen Chemikalien oder Reinigungsmittel zur Reinigung des Produkts. 10. Unsachgemäßer Gebrauch, Herunterfallen oder übermäßige Gewalt können das Produkt beschädigen. Wichtige Sicherheitsinformationen This product is equipped with a built-in lithium battery, and please pay attention to the followings: 1. Please charge the product in time when the battery is low. To protect the battery when not in use for a long time, please turn on the product every 3 months until the battery power runs out and then fully charge the product. It is recommended to use and store it in a suitable environment. 2. It is forbidden to disassemble, hit, squeeze or throw it into fire. If severe swelling occurs, stop using it. Do not place it in a high temperature environment. If the battery life is seriously shortened, stop using it and handle it for professional maintenance. 3. There is a risk of explosion if the battery is improperly replaced, and it can only be replaced with a battery of the same or equivalent type by a professional. 4. The battery (battery pack or assembled battery) shall not be exposed to overheated environments such as sunlight or fire. 5. Products containing lithium batteries should be handled separately from household waste. If the product is disposed of, it is necessary to remove the battery and insulate the positive and negative ends and put it into the designated recycling locations or hand it over to the environmental protection recycling department for disposal, and cannot discard it at will. 6. Procedure for removing battery: a. Use a tool to remove the silicone cover on the surface of the pr…

Text truncated - open the document above for the full version.

Shenzhen Torras Technology Co., Ltd. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Shenzhen Torras Technology Co., Ltd. Address: RM1215, BLK C, Zhantao Technology BLDG, Minzhi Avenue, Minzhi ST, Longhua DIST, Shenzhen, China Product Name: MagStall Power Bank FCC ID: 2AN4Y-PB-P051-01 Model(s): PB-P051-01 2.911(d)(5)(i) Equipment Type We, [Shenzhen Torras Technology Co., Ltd. ] (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Earl Zhu Date: 2023-09-21 Title and Company name: Compliance Engineer NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen Torras Technology Co., Ltd. 2.911 (d)(5)(ii) Applicant Attestation v1.2 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Shenzhen Torras Technology Co., Ltd. Address: RM1215, BLK C, Zhantao Technology BLDG, Minzhi Avenue, Minzhi ST, Longhua DIST, Shenzhen, China Product Name: MagStall Power Bank FCC ID: 2AN4Y-PB-P051-01 Model(s): PB-P051-01 2.911(d)(5)(ii) Applicant filing We, [Shenzhen Torras Technology Co., Ltd. ] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Earl Zhu Date: 2023-09-21 Title and Company name: Compliance Engineer NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen Torras Technology Co., Ltd. 2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process Company name: Shenzhen Torras Technology Co., Ltd. Address: RM1215, BLK C, Zhantao Technology BLDG, Minzhi Avenue, Minzhi ST, Longhua DIST, Shenzhen, China Product Name: MagStall Power Bank FCC ID: 2AN4Y-PB-P051-01 Model(s): PB-P051-01 2.911(d)(7) USA Designated Agent for Service of Process We, [Shenzhen Torras Technology Co., Ltd. ] (“the applicant”) designate [THREE STONES MEDIA LLC] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: THREE STONES MEDIA LLC Address: 1200 Broadway St. APT 329, Los Angeles, CA90015 FRN: 0033401761 Contact Name: Sijie Zhang Telephone No: +1 267 909 3692 Email: [email protected] Applicant Company name: Shenzhen Torras Technology Co., Ltd. Address: RM1215, BLK C, Zhantao Technology BLDG, Minzhi Avenue, Minzhi ST, Longhua DIST, Shenzhen, China FCC Grantee Code: 2AN4Y Contact Name: Earl Zhu Telephone No: +86 150 1922 4926 Email: [email protected] Shenzhen Torras Technology Co., Ltd. 2.911 (d)(7)USA Agent v1.2 Signature: Title: Signature: Title: Compliance Engineer Date: 2023-09-21 Date: 2023-09-21 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threat s-to-the-communications-supply-chain-through-the

Shenzhen Torras Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023-09-21 Subject; Request for Long Term Confidentiality FCC ID: 2AN4Y-PB-P051-01 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram BOM Operational Description It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Earl Zhu Title: Compliance Engineer

Letter of Authorization Company: Shenzhen Torras Technology Co., Ltd. Address: RM1215, BLK C, Zhantao Technology BLDG, Minzhi Avenue, Minzhi ST, Longhua DIST, Shenzhen, China Product Name: MagStall Power Bank Model Number: PB-P051-01 FCC Identifier: 2AN4Y-PB-P051-01 We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Earl Zhu Date: 2023-09-21 Title: Compliance Engineer

Model No.: PB-P051-01 External Model No.: PB-P051-01 Model No.: PB-P051-01

Product Name: MagStall Power Bank Model: PB-P051-01 Lithium Battery Capacity: 5000mA·h (19.25W·h) Rated Capacity: 3000mA·h (TYP 5V 2A) USB-C Input: 5V 3A/ 9V 2A USB-C Output: 5V 2A/ 9V 1.67A Wireless Charging Output: 7.5W Max FCC ID: 2AN4Y-PB-P051-01 Shenzhen Torras Technology Co., Ltd. Made in China LN: 2mm

Label Location

Model No.: PB-P051-01 Internal Model No.: PB-P051-01 Model No.: PB-P051-01 Model No.: PB-P051-01

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 15 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China RF Exposure Report For Applicant Name: Shenzhen Torras Technology Co., Ltd. Address: RM1215, BLK C, Zhantao Technology BLDG, Minzhi Avenue, Minzhi ST, Longhua DIST, Shenzhen, China EUT Name: MagStall Power Bank Brand Name: TORRAS Model Number: PB-P051-01 Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF230905R00202 Test Standards: 47 CFR Part 1 Subpart I Section 1.1310 FCC ID: 2AN4Y-PB-P051-01 Test Conclusion: Pass Test Date: 2023-09-05 to 2023-09-15 Date of Issue: 2023-09-18 Prepared By: Chris Liu / Project Engineer Date: 2023-09-18 Approved By: Ryan.CJ / EMC Manager Date: 2023-09-18 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number: BTF230905R00202 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 15 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2023-09-18 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number: BTF230905R00202 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 15 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1. Introduction ............................................................................................................................................................................................ 4 1.1 Identification of Testing Laboratory ................................................................................................................................. 4 1.2 Identification of the Responsible Testing Location ...................................................................................................... 4 1.3 Laboratory Condition ........................................................................................................................................................... 4 1.4 Announcement ....................................................................................................................................................................... 4 2. Product Information .............................................................................................................................................................................. 5 2.1 Application Information ....................................................................................................................................................... 5 2.2 Manufacturer Information .................................................................................................................................................... 5 2.3 Factory Information .............................................................................................................................................................. 5 2.4 General Description of Equipment under Test (EUT)................................................................................................... 5 3. Test Requirement ................................................................................................................................................................................. 6 3.1 Assessment Result ............................................................................................................................................................... 8 3.2 Test Set-up Photo ................................................................................................................................................................ 14 Test Report Number: BTF230905R00202 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 4 of 15 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China 1. Introduction 1.1 Identification of Testing Laboratory Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Phone Number: +86-0755-23146130 Fax Number: +86-0755-23146130 1.2 Identification of the Responsible Testing Location Test Location: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Description: All measurement facilities used to collect the measurement data are located at F101,201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China FCC Registration Number: 518915 Designation Number: CN1330 1.3 Laboratory Condition Ambient Temperature: 20°C to 25°C Ambient Relative Humidity: 45% to 55% Ambient Pressure: 100 kPa to 102 kPa 1.4 Announcement (1) The test report reference to the report template…

Text truncated - open the document above for the full version.

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 35 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China RF Test Report For Applicant Name: Shenzhen Torras Technology Co., Ltd. Address: RM1215, BLK C, Zhantao Technology BLDG, Minzhi Avenue, Minzhi ST, Longhua DIST, Shenzhen, China EUT Name: MagStall Power Bank Brand Name: TORRAS Model Number: PB-P051-01 Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF230905R00201 Test Standards: 47 CFR Part 15 Subpart C FCC ID: 2AN4Y-PB-P051-01 Test Conclusion: Pass Test Date: 2023-09-05 to 2023-09-15 Date of Issue: 2023-09-18 Prepared By: Chris Liu / Project Engineer Date: 2023-09-18 Approved By: Ryan.CJ / EMC Manager Date: 2023-09-18 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number: BTF230905R00201 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 35 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2023-09-18 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number: BTF230905R00201 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 35 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1. Introduction ............................................................................................................................................................................................ 4 1.1 Identification of Testing Laboratory ................................................................................................................................. 4 1.2 Identification of the Responsible Testing Location ...................................................................................................... 4 1.3 Laboratory Condition ........................................................................................................................................................... 4 1.4 Announcement ....................................................................................................................................................................... 4 2. Product Information .............................................................................................................................................................................. 5 2.1 Application Information ....................................................................................................................................................... 5 2.2 Manufacturer Information .................................................................................................................................................... 5 2.3 Factory Information .............................................................................................................................................................. 5 2.4 General Description of Equipment under Test (EUT)................................................................................................... 5 2.5 Technical Information........................................................................................................................................................... 5 3. Summary of Test Results .................................................................................................................................................................... 6 3.1 Test Standards ....................................................................................................................................................................... 6 3.2 Summary of Test Result ...................................................................................................................................................... 6 3.3 Uncertainty of Test ................................................................................................................................................................ 6 4. Test Configuration ................................................................................................................................................................................ 7 4.1 Environment Condition ........................................................................................................................................................ 7 4.2 Test Equipment List .............................................................................................................................................................. 7 4.3 Test Auxiliary Equipment .................................................................................................................................................... 9 4.4 Test Mode ................................................................................................................................................................................ 9 4.5 Test Setup ..............................................................…

Text truncated - open the document above for the full version.

东莞市德欣达电子科技有限公司 DONGGUAN DEXINDA Electronic Technology Co.,LTD 客户/Client 东莞市卓熠创兴电子有限公司 名称/TYPE 发射线圈 42.5MM （环保状况：RoHS+HF ） 产品型号 Model NO TX42505单槽黑膜线圈面背胶线长50MM 6.3UH 产品编号 DXD2023030503001 Part nunbering systey 客户料号 05A5-V3 Client p/NO 工程编号 Enginrer NO XIE2023050301 日期/Date 2023-05 -03 编制/Prepared 审核/Checked 认可/Approved RAO ZHI PENG XieLiang XU YAN 客户认可回签/Authorixed Signaturure Company Chop 工程/ Enginrer 认可/QC APProved 认可日期/APProved 本公司工程部/For Enginer Departner Only 修改内容/Rrvised Content 认可日期/APProved Date 东莞市德欣达电子科技有限公司 DONGGUAN DEXINDA Electronic Technology Co.,LTD 一、 线圈工艺/Winding Procese: NO 绕组 线规 匝数 绕线方向 备注 1 N1 2UEW-B-0. 08*24P*2 11 TS CCW 2 二．电气性能/FEATURES: 1.测试条件（Test conditions）：25°C,65%RH@100KHz/1V 1.1 电感量（Inductance） 1.11 L0A（单独线圈）=3.8uH±20% 1.12 L0A(线圈+磁片)=6.3uH±10% 1.2 Q值=35MIN 1.3 直流电阻（DCR）：55mΩ MAX 1.4 工作温度(Operating Temperature)：-25°C~85°C 2.测试仪器(Test instrument)： L:创达1068+1310;DCR:502BC;SIZE:Callipers 3.材料清单 NO 项目 材料 1 WIRE ￠0.08*24p*2P 2UEW 2 FERRITE 42.5*0.5 Y槽 铁氧体硬磁 3 GLUE 白胶 4 SOLDER XCD-907B 5 Adhesive 双面背胶 6 High temperature adhesive 3MM高温胶带 7 东莞市德欣达电子科技有限公司 DONGGUAN DEXINDA Electronic Technology Co.,LTD 三．产品实物图/CIRCUIT DIAGRAM 外形图/OUTSIDE DIAGRA 注：线圈面再贴双面胶，3MM小胶带绑线，单槽出线！ 标准 A B C D E I T STD 42.5±0.5 16±1 36.5±1 50±2 2- 5 0.5±0.1 1.45Max 单位： MM 8 东莞市德欣达电子科技有限公司 DONGGUAN DEXINDA Electronic Technology Co.,LTD 五．包装/PACKAGE 5.3包装以现有包装盘为参照标准，以实际出货包装为准，如有特需要求可以定制。 The packaging shall be based on the exusting packing plate and the actual delivery package shall prevail .If there is any requirement,we can customize it. 2600 东莞市德欣达电子科技有限公司 DONGGUAN DEXINDA Electronic Technology Co.,LTD 六、贮存和使用条件 Storage and Use condition 6.1 贮存条件 Storage condition 6.1.1 建议贮存条件：温度-25°C~ 85°C ，湿度70% (Max.) Recommended keeping conditions: -25°C ~85°C, 70%RH (Max.) 6.1.2 贮存期限：自生产之日起六个月内 Storage life : Within the limits of six months from being produced. 6.2 使用条件 Use condition 使用条件限制：温度=-25°C~ 85°C, 湿度≤ 90% Use condition limit: T=-25°C~85°C, RH≤ 90%.

Model No.: PB-P051-01 Radiated Emission (9 kHz -30MHz) Model No.: PB-P051-01 Radiated Emission (30MHz-1GHz) Conducted Emission (AC Mains)