2ANHQDEWWW3Jala Mesh-Router

BASIC INSTALLATION GUIDE FOR JALA MESH-ROUTERS IN MODE 1 This basic guide is intended as a quick help for those end-users who want to install and use the Jala Mesh- Routers in a conventional (wireless) configuration using the so-called Mode 1. Master Installation: Any of those routers could be installed as the master of the mesh. • Use the electric power supply provided with the device to plug it to the chosen indoor-power-outlet. • Turn on the device and wait for the Status LED to stop blinking. • Use an ordinary Ethernet cable to connect the LAN port of the device to the Ethernet port on any computer. • Using any browser on the computer, input 192.168.1.254 in the address field. • Input “admin” as the user and also as the password on the access screen that will pop up. • Choose “Master” mode and click “Next.” • Following the examples in the screenshot, set the Internet (WAN) and WiFi parameters including a password. • Click on “Save.” • The device will automatically reboot and remain configured as the master. Wait a few minutes, and the master device of the mesh will be ready to use. • Disconnect the Ethernet cable from the computer and the LAN port of the device, and use this cable to connect the WLAN port of the device to an Internet access port that the telecommunications company has provided for the house. Satellite installation: The end-user can deploy a conventional mesh configuration in Mode 1 using any other two Jala Mesh- Routers as satellites. • The same as for the master, use the electric power supply provided with the device to plug each one of the two satellites to an indoor-power-outlet in the rooms where you decide to install them; turn them on, and wait for their status LED to stop blinking. • As done before with the master, use an ordinary Ethernet cable to connect the LAN port of each one of the additional two devices to an Ethernet port of any computer. • Using any browser on the computer, input 192.168.1.254 in the address field and check that the computer can now establish a network link with the previously-configured master. • Input “admin” as the user and also as the password on the access screen that will pop up. • Choose “Satellite” mode and click “Next.” Clicking “Next” after choosing “Satellite” will also save this choice. • Each of these devices will automatically reboot and remain configured as a satellite. Follow the example in the screenshot to input the missing data and allow each newly configured satellite to get in sync with the master and click “Save.” The example shows both satellites allocated to a pair of locations or rooms (“Dormitorio” and “Sala”) that will depend on the user. • After configuring the second satellite in the same way, please wait a few minutes, and the whole mesh network will be ready to use, providing WiFi access to all the WiFi mobile devices in the house, which will now be also able to navigate the Internet. The last screenshot shows that it is also possible to use a password to prevent unauthorized WiFi access. The default password for this purpose is 12345678, which can be changed at the user’s convenience. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only.

JALA GROUP EDIFICIO JALA AV. MELCHOR PEREZ DE HOLGUIN N 2643 COCHABAMBA BOLIVIA (LATIN AMERICA) Date: 2020-10-20 FCC ID: 2ANHQDEWWW3 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description Software Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ----------------------------------------------------- Marco J. Peredo / Director of Electronic Integration JALA GROUP TEL: (591) 4 4308282 E-mail: [email protected]

JALA GROUP EDIFICIO JALA AV. MELCHOR PEREZ DE HOLGUIN N 2643 COCHABAMBA BOLIVIA (LATIN AMERICA) Date: 2020-10-20 FCC ID: 2ANHQDEWWW3 A U T H O R I Z A T I O N L E T T E R To Whom It May Concern: JALA GROUP hereby authorizes Andrea Hsia / Supervisor of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Andrea Hsia / Supervisor of BV CPS Taoyuan on JALA GROUP’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------------------------- Marco J. Peredo / Director of Electronic Integration JALA GROUP TEL: (591) 4 4308282 E-mail: [email protected]

Reference No.: 200416C29-1 Page No. 1 / 5 CONSTRUCTION PHOTOS OF EUT Model: DEWWW3 Reference No.: 200416C29-1 Page No. 2 / 5 Reference No.: 200416C29-1 Page No. 3 / 5 Reference No.: 200416C29-1 Page No. 4 / 5 Reference No.: 200416C29-1 Page No. 5 / 5

Part NO.3LSDEWWW3JASD1XX Part NameCase Label DEWWW3Description Dimention75*45mm C2mm 50 Material Print ColorBlack Version2.0 Remark Unitsmm Tolerance DrawerCrystalDate2020.09.29 CustomerJalasoft +-0.5mm Label Area 50% 1:1 75mm C2mm 45mm QR Place 內容全廠印 12碼 JALAMY H 00101 2018 = I 2019 = J 2020 = K 2021 = L 2022 = M 2023 = N Manufacturer Code Manufacturing Year Manufacturing Month A-L Model Code 1 5 8 2 6 10 3 7 11 4 8 12 Number 0010199999 S/N S/NMAC ; MAC:印製欄位NIC0 QR Code format : SN;MAC Amigo ※起始號00101start with 00101 ) White Polyester+PET 19mm JALAMYH00101;AABBCC002233 DEWWW3 S/NJALAMYH00101 AABBCC002233MAC Made in Taiwan 12V 1A INPUT FCC ID2ANHQDEWWW3 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 空白貼紙料號：3LS075045XXXDSXX DEWWW3 S/NJALAMYH00101 XXXXXXXXXXXXMAC Made in Taiwan 12V 1A INPUT FCC ID2ANHQDEWWW3 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. EX:

Part NO. Part NameCase Label DEWPE4Description Dimention75*45mm C2mm 50 Material Print ColorBlack Version1.0 Remark Unitsmm Tolerance DrawerCrystalDate2020.09.29 CustomerJalasoft +-0.5mm Label Area 50% 1:1 75mm C2mm 45mm QR Place 內容全廠印 12碼 JAE4MY H 00101 2018 = I 2019 = J 2020 = K 2021 = L 2022 = M 2023 = N Manufacturer Code Manufacturing Year Manufacturing Month A-L Model Code 1 5 8 2 6 10 3 7 11 4 8 12 Number 0010199999 S/N S/NMAC ; MAC:印製欄位NIC0 QR Code format : SN;MAC Amigo ※起始號00101start with 00101 ) White Polyester+PET 19mm JALAMYH00101;AABBCC002233 DEWPE4 S/NJAE4MYH00101 AABBCC002233MAC Made in Taiwan 12V 1A INPUT FCC ID2ANHQDEWWW3 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 空白貼紙料號：3LS075045XXXDSXX DEWPE4 S/NJAE4MYH00101 XXXXXXXXXXXXMAC Made in Taiwan 12V 1A INPUT FCC ID2ANHQDEWWW3 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. EX:

Reference No.: 200416C29-2 Page No. 1 / 6 CONSTRUCTION PHOTOS OF EUT Model: DEWPE4 2.4G Ant 2 2.4G Ant 1 5G Ant 1 5G Ant 2 Reference No.: 200416C29-2 Page No. 2 / 6 Reference No.: 200416C29-2 Page No. 3 / 6 Reference No.: 200416C29-2 Page No. 4 / 6 Reference No.: 200416C29-2 Page No. 5 / 6 Reference No.: 200416C29-2 Page No. 6 / 6

Reference No.: 200416C29-2 Page No. 1 / 6 CONSTRUCTION PHOTOS OF EUT Model: DEWWW3 2.4G Ant 2 2.4G Ant 1 5G Ant 1 5G Ant 2 Reference No.: 200416C29-2 Page No. 2 / 6 Reference No.: 200416C29-2 Page No. 3 / 6 BT LE ANT Reference No.: 200416C29-2 Page No. 4 / 6 Reference No.: 200416C29-2 Page No. 5 / 6 Reference No.: 200416C29-2 Page No. 6 / 6

Report No.: SA200416C29 Page No. 1 / 6 Report Format Version: 6.1.1 RF Exposure Report Report No.: SA200416C29 FCC ID: 2ANHQDEWWW3 Test Model: DEWPE4 Series Model: DEWWW3 Received Date: Apr. 16, 2020 Test Date: May 29 ~ Sep. 29, 2020 Issued Date: Oct. 08, 2020 Applicant: JALA GROUP Address: EDIFICIO JALA AV. MELCHOR PEREZ DE HOLGUIN N 2643 COCHABAMBA BOLIVIA (LATIN AMERICA) Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SA200416C29 Page No. 2 / 6 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 3 Calculation Result of Maximum Conducted Power ........................................................................... 6 Report No.: SA200416C29 Page No. 3 / 6 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SA200416C29 Original release. Oct. 08, 2020 Report No.: SA200416C29 Page No. 4 / 6 Report Format Version: 6.1.1 1 Certificate of Conformity Product: Jala Mesh-Router Brand: JALA GROUP Test Model: DEWPE4 Series Model: DEWWW3 Sample Status: Engineering sample Applicant: JALA GROUP Test Date: May 29 ~ Sep. 29, 2020 Standards: FCC Part 2 (Section 2.1091) IEEE C95.3 -2002 References Test Guidance: KDB 447498 D01 General RF Exposure Guidance v06 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date:Oct. 08, 2020 Polly Chien / Specialist Approved by : , Date:Oct. 08, 2020 Bruce Chen / Senior Project Engineer Report No.: SA200416C29 Page No. 5 / 6 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA200416C29 Page No. 6 / 6 Report Format Version: 6.1.1 3 Calculation Result of Maximum Conducted Power Frequency Band (MHz) Max AV Power (dBm) Directional Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) WLAN 2412-2462 23.27 5.68 20 0.156 1 5180-5240 26.34 8.14 20 0.558 1 5745-5825 26.40 8.14 20 0.566 1 BT LE 2402 ~ 2480 7.68 3.22 20 0.002 1 Note: 1. Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. 2. The above Antenna information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications, the laboratory shall not be held responsible. *WLAN & BT LE technology can transmit at same time. WLAN 2.4GHz: Max. Directional Gain = 2.67dBi + 10log(2) = 5.68dBi WLAN 5GHz: Max. Directional Gain = 5.13dBi + 10log(2) = 8.14dBi BT LE antenna gain = 3.22dBi Conclusion: The formula of calculated the MPE is: C…

Text truncated - open the document above for the full version.

Report No.: RF200416C29-1 Page No. 1 / 76 Report Format Version:6.1.2 FCC Test Report Report No.: RF200416C29-1 FCC ID: 2ANHQDEWWW3 Test Model: DEWPE4 Series Model: DEWWW3 (refer to item 3.1 for more details) Received Date: Apr. 16, 2020 Test Date: May 29 ~ Sep. 29, 2020 Issued Date: Oct. 08, 2020 Applicant: JALA GROUP Address: EDIFICIO JALA AV. MELCHOR PEREZ DE HOLGUIN N 2643 COCHABAMBA BOLIVIA (LATIN AMERICA) Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RF200416C29-1 Page No. 2 / 76 Report Format Version:6.1.2 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 9 3.2.1 Test Mode Applicability and Tested Channel Detail ........................................................................... 10 3.3 Duty Cycle of Test Signal .................................................................................................................. 12 3.4 Description of Support Units ............................................................................................................. 13 3.4.1 Configuration of System under Test .................................................................................................. 13 3.5 General Description of Applied Standards ........................................................................................ 13 4 Test Types and Results ...................................................................................................................... 15 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 15 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 15 4.1.2 Test Instruments ................................................................................................................................ 16 4.1.3 Test Procedures ................................................................................................................................. 17 4.1.4 Deviation from Test Standard ............................................................................................................ 18 4.1.5 Test Setup .......................................................................................................................................... 18 4.1.6 EUT Operating Conditions ................................................................................................................. 19 4.1.7 Test Results ....................................................................................................................................... 20 4.2 Conducted Emission Measurement .................................................................................................. 42 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 42 4.2.2 Test Instruments ................................................................................................................................ 42 4.2.3 Test Procedures ................................................................................................................................. 43 4.2.4 Deviation from Test Standard ...............................................…

Text truncated - open the document above for the full version.

Reference No.: 200416C29 Page No. 1 / 5 PHOTOGRAPHS OF THE TEST CONFIGURATION Radiated Emission Test above 1GHz Mode A Reference No.: 200416C29 Page No. 2 / 5 Radiated Emission Test below 1GHz Mode A Reference No.: 200416C29 Page No. 3 / 5 Mode B Reference No.: 200416C29 Page No. 4 / 5 Conducted Emission Test Mode A Reference No.: 200416C29 Page No. 5 / 5 Mode B