2ANIV-RGB660RGB LED Photography Video Light with Bluetooth

Official
Home
Page www.neewer.com The
actual
product
may
differ
from
the
picture
in
this
manual
in
color
and
appearance. Smart
Metal
LED
Light Instruction
Manual FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between theequipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. IC warning statements: - English: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. - French: Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d'encompromettre le fonctionnement. About
This
Manual the
basic
operation
procedures
and
functions
of
the
light.
the
application
environment
and
safety
use
of
the
light. the
installation
of
the
accessories
of
the
light. Thank
you
for
purchasing
NEEWER®

RGB660
Metal
LED
Light.
The
manual
will
cover
the
following: Table
of
Contents 1.Package
Contents 2.Applications 3.Functions 4.Power
Supply 5.Modes 6.Quick-start
Guidance 7.Control
the
LED
Light
via
the
App 8.Delete
or
Disconnect
a
Device 9.Installation
Procedures 10.Safety
Notes 11.Caution 12.Product
Parameters 13.Warranty
Policy 14.Trademark
and
Statement 15.Contact
Us 1 2 3 7 8 10 11 14 15 19 20 20 21 22 22 2.Applications Party
Lighting Video
&
Film
Production 2 1 1.Package
Contents Upon
receiving
the
package,
please
check
whether
all
the
items
are
included.
If
there
is
any
missing
or
broken
items,
please
contact
Neewer
Customer
Service
([email protected]). Portrait
Photography More
Creative
Photography
Applications App
ControlRGB
Full
Color
Output Multiple
Control Bi-color
with
Cool
and
Warm

Light
34 DC12-15V NEEWER OFF MAXMINBRRMAXMINHSI MODE N E E W E R Control
Panel Battery
Compartment Power
Port Screen Power
Switch 3.Functions Heat
Dissipation
Plate Tripod
Securing
Knob Angel
Adjustment
Knob Left
Knob Right
Knob Mode/Channel
Button Mode/Channel
Button Quickly
press
the
Mode/Channel
Button
to
switch
from
CCT,
HIS,
to
Scene
mode.
Long
Press
the
Mode/Channel
button
for
three
seconds
in
order
to
enter
the
Channel
Settings. Once
in
Channel
Settings,
turn
the
Left
or
Right
knob
to
change
the
channel. Left
Knob Quickly
press
the
Left
Knob
to
switch
scenes,
then
rotate
the
knob
to
adjust
parameters. Hue
Angle Color
Temperature Standby
Mode Bluetooth Intensity Battery
Level Scene Hue,
Saturation
and
Intensity Channel Saturation Available
Scenes
Display 34 DC12-15V NEEWER OFF MAXMINBRRMAXMINHSI MODE N E E W E R Control
Panel Battery
Compartment Power
Port Screen Power
Switch 3.Functions Heat
Dissipation
Plate Tripod
Securing
Knob Angel
Adjustment
Knob Left
Knob Right
Knob Mode/Channel
Button Mode/Channel
Button Quickly
press
the
Mode/Channel
Button
to
switch
from
CCT,
HIS,
to
Scene
mode.
Long
Press
the
Mode/Channel
button
for
three
seconds
in
order
to
enter
the
Channel
Settings. Once
in
Channel
Settings,
turn
the
Left
or
Right
knob
to
change
the
channel. Left
Knob Quickly
press
the
Left
Knob
to
switch
scenes,
then
rotate
the
knob
to
adjust
parameters. Hue
Angle Color
Temperature Standby
Mode Bluetooth Intensity Battery
Level Scene Hue,
Saturation
and
Intensity Channel Saturation Available
Scenes
Display 56 12 3601001005600k RGB Light 8:00 Hues Saturation BRR CCT CH. 1 2 3 4 5 6 7 8 ALL G100R100 B100 A CB A CB A CB A CB A CB A CB A CB A CB A CB A CB Available
Scenes
are
as
follows: NEEWER
App
Guide Color
Temperature Hue Saturation Intensity Power
Button Scene Color
Disk Channel Parameter
Group The
App
can
save
two
groups
of
default
settings.
You
can
choose
different
group
to
automatically
restore
the
LED
light
to
the
corresponding
settings
saved
under
the
group.
Squad
Car Ambulance Fire
Engine Party Firework
1 Firework
2 Lightning
1 Lightning
2 Screen 78 NP-f550 NEEWER NP-f970 NEEWER N E E W E R DC12-15V NEEWER OFF MAXMINBRRMAXMINHSI MODE Channel DC12-15V NEEWER OFF MAXMINBRRMAXMINHSI MODE Power
on
the
light,
then
long
press
the
“MODE/CH.”
button
for
three
seconds
until
the
symbol“
CH.0”
shows
flickering
on
the
display.
Next,
turn
the
Left
or
Right
Knob
to
switch
channels
between
0
and
8.
Quick
press
the“
MODE/CH.”
button
until
the
symbol“
CCT”
shows
on
the…

Text truncated - open the document above for the full version.

Shenzhen Neewer Technology Co., Ltd Agent Authorization Company: Shenzhen Neewer Technology Co., Ltd Address: ROOM 1901-1903, Block A, LU SHAN BUILDING NO.3023 CHUNFENG RD LUO HU DISTRICT, SHENZHEN, GUANGDONG, 518001, CHINA Product Name: RGB LED Photography Video Light Trade Mark: NEEWER Model Number: RGB660, RGB660 PRO, RGB530, RGB530 PRO, RGB480, RGB480 PRO, RGB960, RGB960 PRO, RGB-P200, RGB-P280, RGB-P600, RGB450, RGB650, RGB1920, RGB190, RGB176, RGB250, SL90, SL90 PRO, SL80, SL80-S, SL70, RGB10-H, RGB12, RGB16, RGB18, RGB18-B, RGB1 FCC ID: 2ANIV-RGB660 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2020-12-30 Name: Xiaowen Pan Title: QE Company: Shenzhen Neewer Technology Co., Ltd

Shenzhen Neewer Technology Co., Ltd Add: ROOM 1901-1903, Block A, LU SHAN BUILDING NO.3023 CHUNFENG RD LUO HU DISTRICT, SHENZHEN, GUANGDONG, 518001, CHINA Tel: 86 755 25984843 Fax: 86 755 25984843 Date: 2020-08-07 Dear Sir/Madam, We, Shenzhen Neewer Technology Co., Ltd Hereby declares the following statement , PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for marketing purpose: Product name: RGB LED Photography Video Light Models No.: RGB660, RGB660 PRO, RGB530, RGB530 PRO, RGB480, RGB480 PRO, RGB960, RGB960 PRO, RGB-P200, RGB-P280, RGB-P600, RGB450, RGB650, RGB1920, RGB190, RGB176, RGB250, SL90, SL90 PRO, SL80, SL80-S, SL70, RGB10-H, RGB12, RGB16, RGB18, RGB18-B, RGB1 Sincerely, Client’s name / title : Xiaowen Pan / QE Contact information / address: ROOM 1901-1903, Block A, LU SHAN BUILDING NO.3023 CHUNFENG RD LUO HU DISTRICT, SHENZHEN, GUANGDONG, 518001, CHINA Tel: 86 755 25984843 Fax: 86 755 25984843 E-Mail: [email protected]

Shenzhen Neewer Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2020-12-30 Subject; Request for Confidentiality FCC ID: 2ANIV-RGB660 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description BOM Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Xiaowen Pan Title: QE

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 IC:22889-RGB660 EXTERIOR PHOTOGRAPHS Fig.1 Fig.2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 IC:22889-RGB660 Fig.3 Fig.4 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 IC:22889-RGB660 Fig.5 Fig.6

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 IC: 22889-RGB660 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1 Label and Location Size: L: 5.0cm*W: 4.0cm Label Location Model: RGB660 FCC ID: 2ANIV-RGB660 IC: 22889-RGB660 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 IC: 22889-RGB660 INTERIOR PHOTOGRAPHS Fig.1 Fig.2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 IC: 22889-RGB660 Fig.3 Fig.4 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 IC: 22889-RGB660 Fig.5 Fig.6 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 IC: 22889-RGB660 Fig.7 Fig.8 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 IC: 22889-RGB660 Fig.9 Fig.10 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 IC: 22889-RGB660 Fig.11 Fig.12 BT Antenna

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 3 Maximum Permissible Exposure Report 1. Product Information FCC ID 2ANIV-RGB660 Product name RGB LED Photography Video Light Test Model RGB660 Power supply Input: AC 110-240V, 50/60Hz, 1A Output: DC 12V-15V, 3.2A Bluetooth 2402MHz ~ 2480MHz Channel Number 40 channels for Bluetooth V4.2(DTS) Channel Spacing 2MHz for Bluetooth V4.2(DTS) Modulation Type GFSK for Bluetooth V4.2(DTS) Bluetooth Version V4.2 Antenna Type PCB Antenna Antenna Gain 0dBi(Max.) Hardware version / Software version / Exposure category General population/uncontrolled environment EUT Type Production Unit Device Type Mobile Device 2. Evaluation Method Systems operating under the provisions of FCC 47 CFR section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as mobile device whereby a distance of 0.2m normally can be maintained between the user and the device, and below RF Permissible Exposure limit shall comply with. In accordance with KDB447498D01 for Simultaneous transmission MPE test exclusion applies when the sum of the MPE ratios for all simultaneous transmitting antennas incorporated in a host device, based on the calculated/estimated, numerically modelled or measured field strengths or power density, is ≤ 1.0. The MPE ratio of each antenna is determined at the minimum test separation distance required by the operating configurations and exposure conditions of the host device, according to the ratio of field strengths or power density to MPE limit, at the test frequency. Either the maximum peak or spatially averaged results from measurements or numerical simulations may be used to determine the MPE ratios. Spatial averaging does not apply when MPE is estimated using simple calculations based on far-field plane-wave equivalent conditions. The antenna installation and operating requirements for the host device must meet the minimum test separation distances required by all antennas, in both standalone and simultaneous transmission operations, to satisfy compliance. 3. Limit 3. 1 Refer Evaluation Method ANSI C95.1–1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. FCC KDB publication 447498 D01 General 1 RF Exposure Guidance v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies. FCC CFR 47 part1 1.1310: Radiofrequency radiation exposure limits. FCC CFR 47 part2 2.1091: Radiofrequency radiation exposure evaluation: mobile devices SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 3 3. 2 Limit Limits for Maximum Permissible Exposure (MPE)/Controlled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 1842/f 61.4 / / 1.63 4.89/f 0.163 / / (100) * (900/f 2 )* 1.0 f/300 5 6 6 6 6 6 Limits for Maximum Permissible Exposure (MPE)/Uncontrolled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 824/f 27.5 / / 1.63 2.19/f 0.073 / / (100) * (180/f 2 )* 0.2 f/1500 1.0 30 30 30 30 30 F=frequency in MHz *=Plane-wave equivalent power density 4. MPE Calculation Method Predication of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna 5. Antenna Information C2M can only use antennas certificated as follows provided by manufacturer; Internal Identification Antenna type and antenna number Operate frequency band Maximum antenna gain Notes Antenna PCB Antenna 2400 MHz –5850 MHz 0 dBi Bluetooth Antenna SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 3 6. Conducted Power <BT LE> Mode Channel Frequency (MHz) Peak Conducted Output Power (dBm) GFSK 0 2402 -0.429 19 2440 -1.201 39 2480 -2.536 7. Measurement Results <BT LE> GFSK (Peak) Channel Channel 0 Channel 19 Channel 39 Target (dBm) 0 -1.0 -2.0 Tolerance ±(dB) 1.0 1.0 1.0 8. Evaluation Results As declared by the Applicant, the EUT is a wireless device used in a fix application, at least 20 cm from any body part of the user or nearby persons; from the maximum EUT RF output power, the minimum separation distance, r =20cm, as well as the gain of the used antenna refer to antenna information, the RF power density can be obtained. <BT LE> Band/Mode RF output power Antenna Gain (dBi) MPE (mW/cm2) MPE Limits (mW/cm2) dBm mW BT LE 1.0 1.2589 0 0.0003 1.0000 Remark: 1. Output power including turn-up tolerance; 2. Output power is burst average power; 3. MPE evaluate distance is 20cm from user manual provide by manufacturer; 4. MPE values = PG/4πR² 9. Conclusion The measurement results comply with the FCC Limit per 47 CFR 2.1091 for the uncontrolled RF Exposure of mobile device. ----------------THE END OF REPORT---------------

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 IC: 22889- RGB660 Page 1 of 16 Appendix A RF Test Data for BT LE V4.2 (Conducted Measurement) Product Name: RGB LED Photography Video Light Trade Mark: Neewer Test Model: RGB660 Environmental Conditions Temperature: 24.6 C Relative Humidity: 54.1% ATM Pressure: 100.0 kPa Test Engineer: Kay Hu Supervised by: Li Huan A.1 Duty Cycle Test Mode Test Channel Ant Duty Cycle[%] Verdict BT LE 2440 Ant1 100 PASS #im grbble1hchnnav SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 IC: 22889- RGB660 Page 2 of 16 A.2 Maximum Conducted Peak Output Power Mode Channel Conduct Peak Power[dBm] Limit [dBm] Verdict BT LE LCH -0.429 30 PASS BT LE MCH -1.201 30 PASS BT LE HCH -2.536 30 PASS Test Graphs LCH MCH SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 IC: 22889- RGB660 Page 3 of 16 HCH SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 IC: 22889- RGB660 Page 4 of 16 A.3 Maximum Power Spectral Density Mode Channel PSD [dBm/3KHz] Limit [dBm/3KHz] Verdict BT LE LCH -14.675 8 PASS BT LE MCH -14.795 8 PASS BT LE HCH -15.895 8 PASS Test Graphs LCH MCH SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 IC: 22889- RGB660 Page 5 of 16 HCH SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 IC: 22889- RGB660 Page 6 of 16 A.4 6dB Bandwidth Mode Channel 6dB Bandwidth [MHz] Limit [MHz] Verdict BT LE LCH 0.7207 ≥0.5 PASS BT LE MCH 0.6936 ≥0.5 PASS BT LE HCH 0.6920 ≥0.5 PASS Test Graphs LCH MCH SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 IC: 22889- RGB660 Page 7 of 16 HCH SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 IC: 22889- RGB660 Page 8 of 16 A.5 Occupied Bandwidth Mode Channel 99% Bandwidth [MHz] Verdict BT LE LCH 1.1825 PASS BT LE MCH 1.0467 PASS BT LE HCH 1.0257 PASS Test Graphs LCH MCH SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 IC: 22889- RGB660 Page 9 of 16 HCH SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 IC: 22889- RGB660 Page 10 of 16 A.6 RF Conducted Spurious Emissions Mode Channel Pref [dBm] Max. Level [dBm] Limit [dBm] Verdict BT LE LCH -0.555 -36.179 -20.555 PASS BT LE MCH -1.399 -36.585 -21.399 PASS BT LE HCH -2.658 -36.667 -22.658 PASS BT LE_LCH_Graphs Pref/BT LE/LCH Puw/BT LE/LCH SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 IC: 22889- RGB660 Page 11 of 16 BT LE_MCH_Graphs Pref/BT LE/MCH Puw/BT LE/MCH SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 IC: 22889- RGB660 Page 12 of 16 BT LE_HCH_Graphs Pref/BT LE/HCH Puw/BT LE/HCH SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 IC: 22889- RGB660 Page 13 of 16 A.7 Band-edge for RF Conducted Emissions Mode Channel Carrier Power[dBm] Max.Spurious Level [dBm] Limit [dBm] Verdict BT LE LCH -0.693 -49.892 -20.69 PASS BT LE HCH -2.458 -36.411 -22.46 PASS Test Graphs LCH HCH SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 IC: 22889- RGB660 Page 14 of 16 A.8 Restrict-band band-edge measurements Test Mode Test Chann el Ant Freq. Power [dBm] Gain Ground Factor E [dBuV/m] Detector Limit [dBuV/ m] Verdi ct BT LE 2402 Ant1 2310.0 -41.63 2.0 0 53.63 PEAK 74 PASS Ant1 2310.0 -53.43 2.0 0 41.83 AV 54 PASS Ant1 2390.0 -36.66 2.0 0 58.59 PEAK 74 PASS Ant1 2390.0 -53.13 2.0 0 42.13 AV 54 PASS 2480 Ant1 2483.5 -37.14 2.0 0 58.12 PEAK 74 PASS Ant1 2483.5 -52.30 2.0 0 42.96 AV 54 PASS Ant1 2500.0 -41.21 2.0 0 54.05 PEAK 74 PASS Ant1 2500.0 -52.35 2.0 0 42.91 AV 54 PASS SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 IC: 22889- RGB660 Page 15 of 16 Restrict-band band-edge measurements_BT LE_2402_Ant1_PEAK Restrict-band band-edge measurements_BT LE_2402_Ant1_AV SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 IC: 22889- RGB660 Page 16 of 16 Restrict-band band-edge measurements_BT LE_2480_Ant1_PEAK Restrict-band band-edge measurements_BT LE_2480_Ant1_AV

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 Report No.: LCS201125117AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 32 FCC TEST REPORT For Shenzhen Neewer Technology Co., Ltd RGB LED Photography Video Light Test Model: RGB660 Additional Model No.: Please Refer to Page 6 Prepared for : Shenzhen Neewer Technology Co., Ltd Address : ROOM 1901-1903, Block A, LU SHAN BUILDING NO.3023 CHUNFENG RD LUO HU DISTRICT, SHENZHEN, GUANGDONG, 518001, CHINA Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel : (+86)755-82591330 Fax : (+86)755-82591332 Web : www.LCS-cert.com Mail : [email protected] Date of receipt of test sample : December 15, 2020 Number of tested samples : 1 Serial number : Prototype Date of Test : December 15, 2020 ~ December 21, 2020 Date of Report : December 22, 2020 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 Report No.: LCS201125117AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 32 FCC TEST REPORT FCC CFR 47 PART 15 C (15.247) Report Reference No. ................. : LCS201125117AEA Date of Issue ................................... : December 22, 2020 Testing Laboratory Name ............ : Shenzhen LCS Compliance Testing Laboratory Ltd. Address ........................................... : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Testing Location/ Procedure ........... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name .......................... : Shenzhen Neewer Technology Co., Ltd Address ........................................... : ROOM 1901-1903, Block A, LU SHAN BUILDING NO.3023 CHUNFENG RD LUO HU DISTRICT, SHENZHEN, GUANGDONG, 518001, CHINA Test Specification Standard.......................................... : FCC CFR 47 PART 15 C (15.247) Test Report Form No. ................... : LCSEMC-1.0 TRF Originator ................................ : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF ..................................... : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. EUT Description. ........................... : RGB LED Photography Video Light Trade Mark .......................................................................................................................................... : Neewer Test Model .......................................................................................................................................... : RGB660 Ratings ................................................................................................................................................ : DC12-15V, 3.2A LED power: 45W Battery: 7.2V, 6600mAh, 47.5Wh Result ........................................... : Positive Compiled by: Supervised by: Approved by: Cherry Chen/ Administrators Jin Wang/ Technique principal Gavin Liang/ Manager SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 Report No.: LCS201125117AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 32 FCC -- TEST REPORT Test Model........................... : RGB660 EUT......................................... : RGB LED Photography Video Light Applicant............................... : Shenzhen Neewer Technology Co., Ltd Address.................................. : ROOM 1901-1903, Block A, LU SHAN BUILDING NO.3023 CHUNFENG RD LUO HU DISTRICT, SHENZHEN, GUANGDONG, 518001, CHINA Telephone............................... : / Fax.......................................... : / Manufacturer........................ : Shenzhen Neewer Technology Co., Ltd Address................................... : ROOM 1901-1903, Block A, LU SHAN BUILDING NO.3023 CHUNFENG RD LUO HU DISTRICT, SHENZHEN, GUANGDONG, 518001, CHINA Telephone............................... : / Fax.......................................... : / Factory................................... : / Address................................... : / Telephone............................... : / Fax.......................................... : / Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCS201125117AEA December 22, 2020 Date of issue SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 Report No.: LCS201125117AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 4 of 32 Revision History Revision Issue Date Revisions Revised By 000 December 22, 2020 Initial Issue Gavin Liang SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 Report No.: LCS201125117AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 5 of 32 TABLE OF CONTENTS 1. GENERAL INFORMATION ................................................................................................................…

Text truncated - open the document above for the full version.

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 IC: 22889-RGB660 _______________________________________________________________________________________________ TEST SETUP PHOTOGRAPHS Photo of Radiated Emissions Measurement Fig. 1 Fig. 2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANIV-RGB660 IC: 22889-RGB660 _______________________________________________________________________________________________ Photo of Conducted Emissions Measurement Fig. 3