2ANOA-T15Wireless Charger

T15 Wireless Charger 1.Put the charger on your desk, and then power it with USB cable and proper adapter. Now the charger is under standby mode with a colorful light . User Manual Unfolded Folded Light switch button rotating shaft Cell phone charging area Light area Type-c input Watch charging area Earphone charging area 1.When only a cellphone is charged, the light area switches to a blue breath indicator. When charging is finished, the lighting area turns off. When the charger is in an abnormal working condition, the lighting area flashes in blue. 2.When only an earphone is charged, the light area switches to a green breath indicator. When charging is finished, the light area turns off. When the charger is in an abnormal working condition, the lighting area flashes in green. 3.When cellphone and earphone are charged at the same time, the light area switches to a breath indicator, blue and green flash alternately. When charging is finished, the lighting area turns off. 4.When both the charging areas of cellphone and earphone are in an abnormal working condition, the light area flashes in blue alternating with green. 5 When phone charging area is abnormal, but earphone charging area is woking, the indicator light will breath 10 seconds in green color then change into blue color flash 5 seconds, cycling till it is back to normal. 6.When earphone charging area is in an abnormal working condition while cellphone charging area is normal, the light area breathes in blue for 10 seconds, and then flashes in green for 5 seconds. This state will keep until the problem is solved. 2.Light switch: by first press, the light will be off; by second press, it will switch to night light mode with soft light; by third press, it will switch to wireless charging indicator mode. Such cycle in order.. Precautions 1. Support all devices enable QI standard; 2. Please use QC2.0 or above adapter to activate fast charging; 3. All phone cases of metal or ring holder are not supported; 4. Please keep the product away from water or other liquid. 7.When cellphone charging is finished while earphone charging area is in an abnormal working condition, the light area flashes in green. Product Introduction Thi s wireless charger is a multi-functional product with a simple, safe and portable design that supports Qi technology. This charger is compatible with all wireless charging cell phones, earphones and watches that support Qi standard protocol.This provides a convenient and safe charging environment using Qi technology. Operation Guide Wireless Charging Indicator Mode Specifications Input: 9V/ 2A Cellphone charging output: 7.5W Max Earphone charging output: 5W Max Watch charging output: 3W Max Charging Distance: ≤8mm Charging Efficiency: ≥80％ Wireless Charge Compatible Devices iPhone: iPhone 8, iPhone 8plus, iPhone X, iPhone XR iPhone 12 series, iPhone13 series SAMSUNG：Note9, S9, S9+, Note8, S8, S8+, S7Edge, S7, Note5, Note6, Note7, S6Edge, S6Edge+, SM-W2019, SM-W2018, SM-W2017 Nokia: 930, 830, 1520, 1020, 820, 720, 920, 925 Google: 4/5/6/7 XIAOMI: MIX2S, 10/10pro, 9/9pro, MIX 3 Earphone:HUAWEI FreeBuds Pro,AirPods 2,AirPods 3, oppo Enco W51,Redmi AirDots 3 Pro Watch:Apple Watch Note：Compatible with all models that support the Qi standard (the above is just part of the models) Package Includes 1 X Wireless charger 1 X USB Cable 1 X User Manual FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

Shenzhen Tengsai Technology Co., Ltd Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023-9-18 FCC ID: 2ANOA-T15 Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing Shenzhen Tengsai Technology Co., Ltd certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing Shenzhen Tengsai Technology Co., Ltd certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Applicant: Shenzhen Tengsai Technology Co., Ltd Address: Room 203, Building A, No. 12, Xiawei Industrial Zone, Zhangxi Community, Guanhu Street, Longhua District, Shenzhen, China Contact Person: Guangming Hu Tel.: +86-0755-23004002 Email: [email protected] Sincerely, Signature:

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: CLF Import and Export Limited FRN: 0033489683 Contact Name: David chen Address: 1312 17th Street #692，Denver, CO 80202, United States Telephone No: (949) 254-2565 Email: [email protected] EIN: 98-1720547 This letter is to confirm that the US Agent for Service of Process accepts responsibility to act as a local representative on behalf of Shenzhen Tengsai Technology Co.,Ltd. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Applicant: Company name: Shenzhen Tengsai Technology Co.,Ltd Product Description: Wireless Charger FRN: 0026817858 Grantee code: 2ANOA FCC ID: 2ANOA-T15 Contact Name: Guangming Hu Address: Room 203, Building A, No. 12, Xiawei Industrial Zone, Zhangxi Community, Guanhu Street, Longhua District, Shenzhen, China Telephone No: +86-0755-23004002 Email: [email protected] The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. This Agreement is valid until (Permanently valid). Date: 2023/09/20 Applicant’s Name: Guangming Hu US Agent for Service of Process’s Name: Title: Project: CEO Title: Manager Signature Signature

（CUSTOMER): （DESCRIPTION) : DATE:2023-9-11 REV.NO.:A 0 Depar tment Quality Engineer ing Procure SPECIFICATION FOR APPROVAL Shenzhen Tengsai Technology Co., Ltd （CUSTOMER P/N）:T15 （SPECIFICATION) ： G43.5 slotting+adhesive backing 140mm7.2uH Hongri Shengwei Technology acknowledges, signs and seals Confirmation/Date Review/Date Approved/date (Stamped with the company seal) Dong Wanhong 2023-9-11 Lv Hui 2023-9-11 Wei Hanman 2023-9-11 He Weihua 2 023-9-11 Wei Lihong 2 023-9-11 Wei Lihong 2 023-9-11 Notes ADD：2nd Floor, Building 1, No. 48 Guanlan Huanguan Middle Road, Longhua New District, Shenzhen TEL ：+86-755-23461055 FAX：+86-0755-28015170 page:1/3 HRSW ELECTRONICS CO.,LTD Hongri Shengwei Technology acknowledges, signs and seals Confirmation/Date Review/Date Approved/date ( Stamped with the company seal) Depar tment Engineer ing Quality Notes 1.MECHANICAL DIMENSION (UNIT:mm) 2.SCHEMATICS: ABC D2EHII 43.5±1.016±1.50.8±0.1140±34±22.8MAX5±0.5 3.WINDING： 1.1底部印字100 STE P TAPE REMAR K N1 4.ELECTRICAL SPECIFICATION: ITEM SPEC 5.BILF OF MATERIAL： NO.SGS NO. 1 2 3 4 5 6 page:2/3 SPECIFICATION FOR APPROVAL START-FINISHWIRE TYPETURNS 4 . The lead needs to be marked with ink S-F silk covered wire⌀0.08*105mm 2UEW 12TS (Ref) LDCRQ valueHI-POT Coil and magnetic plate S-F 100KHz,0.25V AT 25°C 7.2uH±10% 100mΩ Max ITEMMATERIAL SPECIFICATIONMANUFACTURER 0.08 * 105 strands of silk wire Acetone silk wrap0.08*105 NANJINGJINNINGCO,LTD 7mmWide high-temperature adhesive paper CUDAK CO.,LTD Solder Bar Solder Bar QIAODO Magnetic sheet ⌀43.5*0.8 Manganese zinc hard magnetic sheet with L-slot TAIYI CO.,LTD He WeihuaWei Lihong Adhesive backing ⌀41.5*0.1CUDAK CO.,LTD PART NO TITLE G43.5 Slotting+adhesive backing 140mm7.2uH TES T CON HRSW ELECTRONICS CO.,LTD 1. Coil mounting magnetic sheet, magnetic sheet size 43.5 ± 1mm, Open the L slot. 2.Coil outlet position Wrap adhesive paper 1-2Ts; 3. The bottom of the magnetic separator should be pasted with adhesive backing DRAWN BYCHECKED BY APPROVED BY glue Yellow Glue9999 LIANCHENG CO.,LTD High-temperature adhesive paper Wei Lihong 6.1DIMENSION TEST(UNIT:mm) TEST ITEMABCDEHI SPEC 43.5± 1.0 16±1.50.8±0.1140±3 4±22.8MAX5±0.5 1 43.38160.76142 3.502.355.03 2 43.5115.90.78139 3.602.345.02 3 43.4216.20.76140 3.702.414.99 4 43.6215.80.86141 3.802.385.01 5 43.9716.050.83139 4.002.455 6 7 8 9 10 MAX43.9716.200.86142.004.002.455.03 MIN43.3815.800.76139.003.502.344.99 AVERAGE43.5815.990.80140.203.722.395.01 DCR Q S-F TEST CONDAT 25°C SPEC 7.2uH ±10% 100mΩ (Max) 17.2158.00 27.2059.00 37.1958.60 47.2357.20 57.2558.90 6 7 8 9 10 MAX7.2559.00 MIN7.1957.20 AVERAGE7.2258.34 page:3/3 TITLE G43.5 Slotting+adhesive backing 140mm7.2uH DRAWN BYCHECKED BY He Weihua 100KHz/0.25v HRSW ELECTRONICS CO.,LTD PART NO TEST ITEM S-F HI-POT APPROVED BY SPECIFICATION FOR APPROVAL 6.SAMPLE TEST DATA 6.2ELECTRICAL TEST LIDC Wei Lihong Wei Lihong

HRSW ELECTRONICS CO., LTD Page 1 PRODUCT SPECIFICATION FOR APPROVAL Two-dimensional four images Power Transmitter for Apple Watch CUSTOMER PRODUCT NAME PART No. PRODUCT SPEC Inductance Spec: 7.7uH±10% Shielding spec: KP24.5*2.6mm soft shielding with rubber Silk covered wire spec: 2 UEW/155 0.08*24*13Ts Segment Length: 9mm Double side Type: 3M 9448A Magnet Spec: 7.8*2mm Electroplating with Zinc April 12, 2023 DATE VERSION REV1.0 RevisionModified ContentPrincipleDateNote REV 1.0 first release Wei Lihong 2023-04-12 PREPARED BYCHECKED BYAPPROVED BY Authorized signature & company chop HRSW ELECTRONICS CO.,LTD ADD：2nd Floor, Building 1, No. 48 Guanlan Huanguan Middle Road, Longhua New District, Shenzhen TEL： +86-755-23461055 FAX：+86-0755-28015170 Shenzhen Chenxing Electronic Technology Co,Ltd. Company Name: Shenzhen Chenxing Electronic Technology Co., Ltd Factory address: 5th floor, Building 1, Xinkecheng Science and Technology Industrial Park, No. 51 Dabao Road, Xin'an Street, Bao'an District, Shenzhen Page 2 SPECIFICATION 一、Product size Shielding Outer Diameter Max ( A) 25±0.5mm Shielding Thickness (B) 2.6±0.2mm Shielding Outer Diameter Min (C) 23.7±0.4mm Shielding Inner Diameter(D) 21±0.5mm Inner Hole Outer Diameter(E) 13.5±0.2mm Shielding Cylinder Height (F) 2.3±0.25mm Inner Hole Inner Diameter (H) 7.7±0.4mm Pin Length (I)3.0±0.2mm Segment Length (J)9mm±2mm Magnet Spec7.8*2.0±0.1mm Adhesive Tape3M 9448A Shenzhen Chenxing Electronic Technology Co,Ltd. Page 3 二、schematic diagram 三、Winding parameters TERMINALWIRETurnsWinding Direction SF silk covered wire 0.08*24P 13TsCCW 四、Electrical characteristics： TEMPERATURE:25±10°C, RELATIVE HUMIDITY:65±20% ITEMTERMINALSPECIFICATIONTEST FREQUENCYTEST EQUIPMENTS IND.S-F 7.7uH±10% 100KHz/1.0VLCZ METER 1062B HRSW ELECTRONICS CO.,LTD ADD：2nd Floor, Building 1, No. 48 Guanlan Huanguan Middle Road, Longhua New District, Shenzhen TEL：+86-755-23461055 FAX ： +86-0755-28015170

Shenzhen Tengsai Technology Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: September 18, 2023 Subject; Request for Confidentiality FCC ID: 2ANOA-T15 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Guangming Hu Title: CEO

Sept. 18,2023 Shenzhen Tengsai Technology Co., Ltd Model difference statement We Shenzhen Tengsai Technology Co., Ltd Of Room 203, Building A, No. 12, Xiawei Industrial Zone, Zhangxi Community, Guanhu Street, Longhua District, Shenzhen, China Declare under our sole responsibility that the product Product: Wireless Charger Model Number: T15A, T15B, T15C, T16, T18, T19, T20, T21, T22, T23, T25, T26, T27, T28, T29 Except for the model and appearance color, all models have the same circuit and module. Thanks Sincerely, Guangming Hu /CEO E-mail: : [email protected] Phone: +86-0755-23004002 Fax: +86-0755-23004002 Address : Room 203, Building A, No. 12, Xiawei Industrial Zone, Zhangxi Community, Guanhu Street, Longhua District, Shenzhen, China

Effective Date: April 2, 2020 QSF 7.6.4-8 – Agent Authorization Letter Template Page 1 of 1 Revision Date: Revision: 0 Shenzhen Tengsai Technology Co., Ltd Date：Sept. 18, 2023 Product Model Number: Wireless Charger FCC ID：2ANOA-T15 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that ORGANIZATION. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by ORGANIZATION. on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite Title: CEO Email: [email protected] Telephone: +86-0755-23004002 On behalf of: Shenzhen Tengsai Technology Co., Ltd

Ext Photos Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6

Label and Label Location Labe Label and Label Location:

Int Photos Photo 1 Photo 2 Phone: ANT Air pods: ANT Photo 3 Photo 4 Photo 5 Photo 6 Watch: ANT Photo 7 Photo 8

- Page 1 of 12 - Report No.: HB20230911001E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com RF EXPOSURE Test Report Product: Wireless Charger Trade Mark: N/A Model Number: T15 FCC ID: 2ANOA-T15 Prepared for Shenzhen Tengsai Technology Co., Ltd Room 203, Building A, No. 12, Xiawei Industrial Zone, Zhangxi Community, Guanhu Street, Longhua District, Shenzhen, China Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 12 - Report No.: HB20230911001E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 7 2.1 TEST LABORATORY ..................................................................................................................................................... 7 2.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 7 2.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 7 2.4 TEST SOFTWARE ........................................................................................................................................................ 7 3 LIST OF TEST EQUIPMENT .................................................................................................................................. 8 4 RF EXPOSURE..................................................................................................................................................... 9 4.1 MAXIMUM PERMISSIBLE EXPOSURE .............................................................................................................................. 9 4.1.1. Limit ............................................................................................................................................................ 9 4.1.2. Test Procedures ........................................................................................................................................... 9 4.1.3. Test Setup .................................................................................................................................................. 10 4.1.4. Test Result ................................................................................................................................................. 10 5 PHOTOGRAPHS OF THE TEST SETUP ..................................................................................................................12 - Page 3 of 12 - Report No.: HB20230911001E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Shenzhen Tengsai Technology Co., Ltd Address ................................. : Room 203, Building A, No. 12, Xiawei Industrial Zone, Zhangxi Community, Guanhu Street, Longhua District, Shenzhen, China Manufacturer's Name .......... : Shenzhen Tengsai Technology Co., Ltd Address ................................. : Room 203, Building A, No. 12, Xiawei Industrial Zone, Zhangxi Community, Guanhu Street, Longhua District, Shenzhen, China Product description Product name ........................ : Wireless Charger Model Number ....................... : T15 Standards ............................. : FCC CFR 47 PART 1 , 1.1310 Test procedure ..................... : KDB 680106 D01 RF Exposure Wireless Charging Apps v03r01 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ........................................... : Date (s) of performance of tests ............. : Sept. 11. 2023~Sept. 15. 2023 Test Result .............................................. : Pass Testing Engineer : ( Z o e Su) Technical Manager : ( G a r y Lu) Authorized Signatory : (L e o S u) - Page 4 of 12 - Report No.: HB20230911001E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Revisi…

Text truncated - open the document above for the full version.

- Page 1 of 31 - Report No.: HB20230911001E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Test Report Product: Wireless Charger Trade Mark: N/A Model Number: T15 FCC ID: 2ANOA-T15 Prepared for Shenzhen Tengsai Technology Co., Ltd Room 203, Building A, No. 12, Xiawei Industrial Zone, Zhangxi Community, Guanhu Street, Longhua District, Shenzhen, China Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 31 - Report No.: HB20230911001E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 6 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 SUMMARY OF TEST RESULT ............................................................................................................................... 7 3 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 8 3.1 TEST LABORATORY ..................................................................................................................................................... 8 3.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 8 3.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 8 3.4 TEST SOFTWARE ........................................................................................................................................................ 8 4 LIST OF TEST EQUIPMENT .................................................................................................................................. 9 5 TEST ITEM AND RESULTS ...................................................................................................................................11 5.1 ANTENNA REQUIREMENT .......................................................................................................................................... 11 5.2 CONDUCTED EMISSION ............................................................................................................................................. 12 5.3 RADIATED EMISSION ................................................................................................................................................ 16 5.4 OCCUPIED BANDWIDTH ............................................................................................................................................ 21 6 PHOTOGRAPHS OF THE TEST SETUP ..................................................................................................................23 7 PHOTOGRAPHS OF THE EUT..............................................................................................................................25 - Page 3 of 31 - Report No.: HB20230911001E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Shenzhen Tengsai Technology Co., Ltd Address ................................. : Room 203, Building A, No. 12, Xiawei Industrial Zone, Zhangxi Community, Guanhu Street, Longhua District, Shenzhen, China Manufacturer's Name .......... : Shenzhen Tengsai Technology Co., Ltd Address ................................. : Room 203, Building A, No. 12, Xiawei Industrial Zone, Zhangxi Community, Guanhu Street, Longhua District, Shenzhen, China Product description Product name ........................ : Wireless Charger Model Number ....................... : T15 Standards ............................. : FCC Part 15C Test procedure ..................... : ANSI C63.4: 2014 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ........................................... : Date (s) of performance of tests ............. : Sept. 11. 2023~Sept. 15. 2023 Test Result .............................................. : Pass Testing Engineer : ( Z o e Su) Technical Manager : ( G a r y Lu) Authorized Signatory : (L e o S u) - Page 4 of 31 - Report No.: HB20230911001E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: …

Text truncated - open the document above for the full version.

- Page 1 of 2 - Test Setup Photos Radiated Emission Below 30MHz Radiated Emission Above 30MHz - Page 2 of 2 - Conducted emission MPE