2ANTG-WAVE2DEVCEmbr Wave 2

Learn how to use Embr Wave to take control with temperature. Welcome Press the blank button once. If the white light comes on, you’re good to go! If not, charge your Wave by placing it on the charging puck, using the Embr-provided USB cable. You’ll see a solid green light when your Wave is fully charged, which usually takes about 1-2 hours. Charging Puck USB Cable Wake up your Wave and let’s get started! Wear the Wave on the inside of your wrist. The Wave should be worn about an inch away from your hand with the buttons facing your elbow. It should feel snug against your skin. Adjust the position until it feels comfortable for you. Unlock the power of your Wave with the Embr Wave 2 App. The app allows you to personalize the sensations you feel and how long you feel them. It also lets you understand how you use your Wave and configure your device to your preferences. Download the Embr Wave 2 App for iOS or Android and follow the on-screen instructions to connect your Wave. Connect your Embr Wave to the app to get started. CoolingWarming Dotted ButtonBlank Button Relief comes at the press of a button. Press either button once to wake up. Press the dotted button once to start cooling. or Press the blank button once to start warming. During a session, press the dotted button once to make things cooler or the blank button to make things warmer. Press and hold either button for 1 second to manually stop a session. Start Session Adjust Temperature Stop Session Control your Wave using the two buttons on its side. The Wave has two lights on the side. *The secondary light will only show when your Wave is updating or if an error has occured. Center Light Secondary Light* White light: Awake (ready to cool or warm) Blue light: Cooling Orange light: Warming Blinking red light: Low battery Solid red light: Consult the app for more information The center light shows you what your Wave is doing. Your Wave and your body work together to help you feel better. 1. Temperature Sensation You feel cooling or warming waves on your wrist. The sensitive nerve endings beneath your skin tell your brain that the temperature is changing. Within minutes, your body balances itself so you can feel relief, naturally. 2. Natural Response 3. Feel Better Overall Give your body and mind time to respond. Not feeling the relief you expect? It can take about a week to get used to the sensations of the Wave and understand how it’s working for you. Embr Wave also works better over time. The more you use it, the more eective it can become as you discover what feels best for your body. Questions? Download the Embr Wave App for more on how to best use your device. Explore frequently asked questions, schedule a phone call, or reach our team via chat or email at support.embrlabs.com Give your body and mind time to respond. Not feeling the relief you expect? It can take about a week to get used to the sensations of the Wave and understand how it’s working for you. Embr Wave also works better over time. The more you use it, the more eective it can become as you discover what feels best for your body. Your Wave and your body work together to help you feel better. 1. Temperature Sensation You feel cooling or warming waves on your wrist. The sensitive nerve endings beneath your skin tell your brain that the temperature is changing. Within minutes, your body balances itself so you can feel relief, naturally. 2. Natural Response 3. Feel Better Overall White light: Awake (ready to cool or warm) Blue light: Cooling Orange light: Warming Blinking red light: Low battery Solid red light: Consult the app for more information The center light shows you what your Wave is doing. The Wave has two lights on the side. *The secondary light will only show when your Wave is updating or if an error has occured. Center Light Secondary Light* Press either button once to wake up. Press the dotted button once to start cooling. or Press the blank button once to start warming. During a session, press the dotted button once to make things cooler or the blank button to make things warmer. Press and hold either button for 1 second to manually stop a session. Start Session Adjust Temperature Stop Session Control your Wave using the two buttons on its side. CoolingWarming Dotted ButtonBlank Button Relief comes at the press of a button. Download the Embr Wave 2 App for iOS or Android and follow the on-screen instructions to connect your Wave. Connect your Embr Wave to the app to get started. Unlock the power of your Wave with the Embr Wave 2 App. The app allows you to personalize the sensations you feel and how long you feel them. It also lets you understand how you use your Wave and configure your device to your preferences. Wear the Wave on the inside of your wrist. The Wave should be worn about an inch away from your hand with the buttons facing your elbow. It should feel snug against your skin. Adjust the position until it feels comfortable for you. Press the blank button once. If the white light comes on, you’re good to go! If not, charge your Wave by placing it on the charging puck, using the Embr-provided USB cable. You’ll see a solid green light when your Wave is fully charged, which usually takes about 1-2 hours. Charging Puck USB Cable Wake up your Wave and let’s get started! Questions? Download the Embr Wave App for more on how to best use your device. Explore frequently asked questions, schedule a phone call, or reach our team via chat or email at support.embrlabs.com Learn how to use Embr Wave to take control with temperature. Welcome

This dev ice cont ains licence- exem pt t r ansm it t er (s)/receiv er (s) t hat com ply wit h Innov at ion, Science and E conom ic D ev elopm ent Canada’ s licence- exem pt RSS(s). Oper at ion is subject t o t he f ollowing t wo condit ions: (1 ) This dev ice m ay not cause int er f erence; and (2 ) This dev ice m ust accept any int er f erence, including int er f erence t hat m ay cause undesired oper at ion of t he dev ice. L’ ém et t eur /récept eur exem pt de licence cont enu dans le présent appareil est conf or m e aux CN R d’ Innov at ion, Sciences et D év eloppem ent économ ique Canada applicables aux appareils r adio exem pt s de licence. L’ exploit at ion est aut or isée aux deux condit ions suiv ant es: (1) L’appareil ne doit pas produire de brouillage; et (2) L’appareil doit accepter tout brouillage r adioélect r ique subi, m êm e si le brouillage est suscept ible d’ en com prom et t re le f onctionnement. This equipment complies with FCC/IC RSS-102 r adiation exposure limits set f or th f or an uncont rolled env ironm ent . Cet équipem ent est conf or m e aux lim it es d'exposit ion aux r adiat ions FCC/IC CNR-102 établies pour un environnement non contrôlé. This device complies with Par t 15 of the FCC Rules. Oper ation is subject to the f ollowing two condit ions: (1 ) t his dev ice m ay not cause har m f ul int er f erence, and (2 ) t his dev ice m ust accept any int er f erence receiv ed, including int er f erence t hat m ay cause undesired oper at ion. This equipment has been tested and f ound to comply with the limits f or a Class B digital device, pur suant t o Par t 1 5 of t he FCC Rules. These lim it s are designed t o prov ide reasonable prot ect ion against har mf ul inter f erence in a residential installation. This equipment gener ates, uses and can r adiate r adio f requency ener gy and, if not installed and used in accordance with the instr uctions, m ay cause har m f ul int er f erence t o r adio com m unicat ions. Howev er, t here is no guar ant ee t hat inter f erence will not occur in a par ticular installation. If t his equipm ent does cause har m f ul int er f erence t o r adio or t elev ision recept ion, which can be det er m ined by t ur ning t he equipm ent o and on, t he user is encour aged t o t r y t o cor rect t he int er f erence by one or m ore of t he f ollowing m easures: - Reor ient or relocat e t he receiv ing ant enna. - Increase t he separ at ion bet ween t he equipm ent and receiv er. - Connect the equipment into an outlet on a circuit dierent f rom that to which the receiver is connect ed. - Consult t he dealer or an exper ienced r adio/TV t echnician f or help. FCC Caut ion: Changes or m odificat ions not expressly approv ed by E m br Labs could v oid t he user 's aut hor it y t o oper at e t he equipm ent . This product conf or ms to all applicable EU directive requirements. 4. Warranty Information (iii) Disclaimers. THIS LIMITED WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON- INFRINGEMENT) WITH RESPECT TO THE PRODUCTS, THE MANUFACTURE, SALE, SUPPLYING OR FAILURE OR DELAY IN SUPPLYING OF THE PRODUCTS, SERVICES RELATED THERETO OR THE USE, RESULTS OR DISPOSITION OF THE PRODUCTS. EMBR EXPRESSLY DISCLAIMS ALL WARRANTIES (WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL) WITH RESPECT TO THE RESULTS OBTAINED FROM THE PRODUCT. OUR PRODUCTS DO NOT PROTECT YOU FROM OVERHEATING OR ANY OTHER HEALTH OR SAFETY RISKS. YOU ARE SOLELY RESPONSIBLE FOR MAINTAINING YOUR OWN HEALTH AND SAFETY. 6. Regulatory Information (cont.) 5. Regulatory Information M ade an d Im por ted by Em br Labs. In c. 24 Rolan d St Su ite 102, Boston, M A, 02129 USA em br labs. com Ne e d h e lp? Contact ou r support team: support.em brlabs.com We’d love to hear from you! Embr Wave® 2 Device M ode l: WAVE2- DEVC- BL K ( E100), WAVE2- DEVC- R G (E101) Ch arge r M ode l: WAVE2- CHR G- BL K (E151), WAVE2- CHR G- R G (E152) Pat: em brlabs.com/patents FCC ID: 2ANTG-WAVE2DEVC IC: 23206-WAVE2DEVC C AN IC ES - 0 03(B)/ NM B- 0 03(B) Licenses and notices associated with the software distributed with th is produ ct are provided at em br labs. com / wave2. 3. Warranty Information (i) Lim it ed Warrant y . The lim it ed warrant y set f ort h herein applies only t o t he Buy er, m ay be act ed upon only by the Buyer, and may not be assigned, sold, or transf erred to any third party. Embr w arran t s on l y t o t h e B u y er t h at , f or a peri od of on e ( 1 ) y ear f rom del i v ery , t h e P rodu ct s h al l substantially conf or m to Embr’s published specifications as of the date of shipment. The limited warrant y herein s hall not apply t o ( i) any P roduct t hat has been cus t om ized, alt ered, or repaired by any person or entity other than personnel of Embr or personnel specifically authorized by Embr, (ii) any Product t hat has been subject ed t o abuse, m isuse, dam age, neglect , or accident bey ond Embr’s published limitations f or the Product or other causes exter nal to the Products (including, without limitation, environmental conditions and power conditions), (iii) use of the Product in com binat ion wit h product s or sof t ware not supplied by E m br, (iv ) any use or operat ion of t he Product other than in accordance with Embr’s then-current published specifications and inst ruct ions f or t he Product , or (v ) any non- conf or m it ies or def ect s not ified by Buy er t o Seller wit h res pect t o a P rodu ct af t er t h e expi rat i on of t h e appl i cabl e w arran t y peri od f or s u ch P rodu ct . (ii) Remedies. Buyer’s sole and exclusive remedy and Seller’s sole and exclusive liability f or a breach of this limited warranty shall be, at Seller’s option, Seller’s use of its commercially reas on abl e e ort s t o repai r or repl ace t h e n on - con f or m i n g P rodu ct . If E m br i s u n abl e, af t er reas on abl e e …

Text truncated - open the document above for the full version.

Embr Labs, Inc. Date: March 1 st , 2021 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2ANTG-WAVE2DEVC To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Embr Labs, Inc.. This authorization is valid until further written notice from the applicant. Print Name: Sam Shames Title: Co-Founder & COO Signature: On behalf of Company: Embr Labs, Inc. Telephone: 617-564-3627 E-mail: [email protected]

Embr Labs, Inc. TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: 2ANTG-WAVE2DEVC LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Print Name: Sam Shames Title: Co-Founder & COO Signature: On behalf of Company: Embr Labs, Inc. Telephone: 617-564-3627 E-mail: [email protected]

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Embr Labs, Inc. Address 24 Roland St STE 102, BOSTON,Massachusetts 02129,United States Grantee Code 2ANTG FCC ID 2ANTG-WAVE2DEVC Authorized Contact Name Sam Shames Contact Email [email protected] Contact Phone 617-564-3627 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: March 1, 2021 Print Name: Sam Shames Title: Co-Founder & COO *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 4 External Photos for SZEM2101001228CR FCC ID: 2ANTG-WAVE2DEVC SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 4 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 4

SAMPLE QR CODE SHOWS LOCATION. QR CODE CONTENT TBD SAMPLE QR CODE SHOWS LOCATION. QR CODE CONTENT TBD SAMPLE QR CODE SHOWS LOCATION. QR CODE CONTENT TBD SAMPLE QR CODE SHOWS LOCATION. QR CODE CONTENT TBD

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 4 Internal Photos for SZEM2101001228CR FCC ID: 2ANTG-WAVE2DEVC SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 4 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 4 Antenna SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 4

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM210100122803 Page: 1 of 6 Keny Xu EMC Laboratory Manager 1 Cover page SAR Evaluation Report Application No.: SZEM2101001228CR Applicant: Embr Labs, Inc. Address of Applicant: 24 Roland St STE 102, BOSTON, Massachusetts, 02129 United States Manufacturer: Embr Labs, Inc. Address of Manufacturer: 24 Roland St STE 102, BOSTON, Massachusetts, 02129 United States Factory: JDI Electronics Factory Address of Factory: Sima Industrial Zone, Sima Village, Chang Ping Town, Dongguan, Guang Dong, China Equipment Under Test (EUT): EUT Name: Embr Wave 2 Model No.: E100, E101   Please refer to section 4.1 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: Embr Wave ® FCC ID: 2ANTG-WAVE2DEVC Standards: 47 CFR Part 1.1307 47 CFR Part 2.1093 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt: 2021-01-28 Date of Test: 2021-01-29 to 2021-02-19 Date of Issue: 2021-02-19 Test Result : Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM210100122803 Page: 2 of 6 2 Version Revision Record Version Chapter Date Modifier Remark 01 2021-02-19 Original Authorized for issue by: Harry Wu/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM210100122803 Page: 3 of 6 3 Contents Page 1 COVER PAGE .............................................................................................................................................. 1 2 VERSION ...................................................................................................................................................... 2 3 CONTENTS .................................................................................................................................................. 3 4 GENERAL INFORMATION .......................................................................................................................... 4 4.1 GENERAL DESCRIPTION OF EUT ............................................................................................................. 4 4.2 TEST LOCATION ...................................................................................................................................... 5 4.3 TEST FACILITY ........................................................................................................................................ 5 4.4 DEVIATION FROM STANDARDS ................................................................................................................. 5 4.5 ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................... 5 4.6 OTHER INFORMATION REQUESTED BY THE CUSTOMER ............................................................................. 5 5 SAR EVALUATION ...................................................................................................................................... 6 5.1 RF EXPOSURE COMPLIANCE REQUIREMENT ............................................................................................ 6 5.1.1 Standard Requirement ..................................................................................................................... 6 5.1.2 Limits ................................................................................................................................................ 6 5.1.3 EUT RF Exposure ............................................................................................................................ 6 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM210100122803 Page: 4 of 6 4 General Information 4.1 General Description of EUT Power supply: DC 3.8V Rechargeable Battery Cable(s): Type C Cable: 1m, Unshielded Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.0 Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Data Rate: 1Mbps Antenna Type: Chip Antenna Antenna Gain: 1.88dBi Remark: Model No.: E100, E101 Only the model E100 was tested, since according to the declaration from the applicant, the electrical circuit design, layout, components used, internal wiring and functions were identical for all the above models, with only different on cosmetic. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM210100122803 Page: 5 of 6 4.2 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 No tests were sub-contracted. 4.3 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1178 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized as an accredited testing laboratory. Designation Number: CN1178. Test Firm Registration Number: 406779. • Innovation, Science and Economic Development Canada SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized by ISED as an a…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM210100122802 Page: 1 of 47 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZEM2101001228CR Applicant: Embr Labs, Inc. Address of Applicant: 24 Roland St STE 102, BOSTON, Massachusetts, 02129 United States Manufacturer: Embr Labs, Inc. Address of Manufacturer: 24 Roland St STE 102, BOSTON, Massachusetts, 02129 United States Factory: JDI Electronics Factory Address of Factory: Sima Industrial Zone, Sima Village, Chang Ping Town, Dongguan, Guang Dong, China Equipment Under Test (EUT): EUT Name: Embr Wave 2 Model No.: E100, E101   Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: Embr Wave ® FCC ID: 2ANTG-WAVE2DEVC Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2021-01-28 Date of Test: 2021-01-29 to 2021-02-19 Date of Issue: 2021-02-19 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM210100122802 Page: 2 of 47 Revision Record Version Chapter Date Modifier Remark 01 2021-02-19 Original Authorized for issue by: Harry Wu/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM210100122802 Page: 3 of 47 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.4,6.5,6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Remark: Model No.: E100, E101 Only the model E100 was tested, since according to the declaration from the applicant, the electrical circuit design, layout, components used, internal wiring and functions were identical for all the above models, with only different on cosmetic. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM210100122802 Page: 4 of 47 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 TEST SUMMARY ....................................................................................................................................... 3 3 CONTENTS ................................................................................................................................................ 4 4 GENERAL INFORMATION ........................................................................................................................ 6 4.1 DETAILS OF E.U.T. ............................................................................................................................... 6 4.2 DESCRIPTION OF SUPPORT UNITS ......................................................................................................... 6 4.3 MEASUREMENT UNCERTAINTY .............................................................................................................. 6 4.4 TEST LOCATION .................................................................................................................................... 7 4.5 TEST FACILITY ...................................................................................................................................... 7 4.6 DEVIATION FROM STANDARDS ............................................................................................................... 7 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ..................................................................................... 7 5 EQUIPMENT LIST ...................................................................................................................................... 8 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................... 11 6.1 ANTENNA REQUIREMENT .................................................................................................................... 11 6.1.1 Test Requirement: ....................................................................................................................... 11 7 RADIO SPECTRUM MATTER TEST RESULTS ..................................................................................... 12 7.1 CONDUCTED PEAK OUTPUT POWER .................................................................................................... 12 7.1.1 E.U.T. Operation .......................................................................................................................... 12 7.1.1 Test Mode Description ................................................................................................................. 12 7.1.2 Test Setup Diagram .........................................................................…

Text truncated - open the document above for the full version.