2ANVTEX-100TWireless Voice Transmission Device

User manual of wireless tour guide Transmitter: EX-100T Microphone 1、On-off operation： ●Turn on：Keep pressing the“M" button for 2 seconds to turn on. ●Turn off：Keep pressing the “M” button for 2 seconds to turn off. 2、The person in charge of the devices needs to know how to set the ID （ID can also be understood as channel ): (1) Why and when need to set the ID: 1, When there are two or more groups using the devices at the same location,to avoid the interference between the groups,you need to set different IDs for the devices (including both transmitters and receivers) of different groups. 2,When you need to add more receivers to a group,and the ID of these added receivers is not the same as that of the devices of the group,you need to set the ID of these added receivers to be the same as that of the group.(The ID of the transmitter and the receivers in a group must be the same.) (2) The ways of ID setting: We have two ways to do this: Wireless ID setting and manual ID setting.(We will use wireless ID setting if we have to set the ID for many receivers;And we will use manual ID setting if we have to set the ID for only a few receivers.) 1、 Wireless ID setting: ● The ID setting of transmitter: Turn off the transmitter,insert the microphone,keep pressing the " " button by your right hand, and then press the " M " button for 2 seconds by your left hand to turn on the transmitter,and the right hand leaves the button when you see the ID number is changing.Now you have entered the ID setting mode,you can then click the " " or " " button to change the ID number,and then click the "M" button to confirm it,now it has entered the wireless transmitting status of ID matching.(Now the ID number is flashing,and it shows the antenna " " icon and the power status icon).Now we can put the transmitter aside and continue to do the wireless ID setting of the receivers: ● The wireless ID setting of receivers: Turn off the receiver,insert the earphone,keep pressing the " " button by your left hand ,and then press the " " button for 2 seconds by your right hand to turn on the receiver,and the left hand leaves the button when the ID number shows "00",now the receiver has entered the wireless ID receiving mode,and its ID number will change to the same one as that of the transmitter's .(This step must be done under the condition that the transmitter is at the wireless transmitting status of ID matching: The ID number of the transmitter is flashing) After the ID numbers for the transmitter and all the receivers for the same group are set to be the same,turn off all of them,the wireless setting process is finished.When you turn them on again,they can work now. 2、 Manual ID setting: ● The manual ID setting of receivers: Turn off the receiver,keep pressing the " " button by your right hand, and press the " " button for 2 seconds by your left hand to turn on the receiver,the right hand leaves the button when the ID number is changing,now the receiver has entered the manual ID setting mode,you can click the "" button or the " " button to change the ID number,and then click the " " button to confirm it.Then turn it off,the manual ID setting process is finished. Receiver: ATG -100R Earphone 1、On - off operation： ●Turn on：Keep pressing the“ ” button for 2 seconds to turn on. ●Turn off：Keep pressing the “ ” button for 2 seconds to turn off. 2、Volume adjustment: When the display screen shows the searching icon “”, it means it is searching signal at this moment, the volume can not be adjusted. As soon as the receiver receives the transmitting signal,the display screen will show the signal icon “ ”,now you can click the “ ” or “ ” button to adjust the volume. The volume has 10 levels from 0 to 9. Attention: When the transmitters and receivers are not used for a long time,please charge them once every 3 months,so that the batteries can be protected. (There is lithium battery inside the device, if it was not used or charged for a long time,the battery would be damaged.) User manual of Charging case 1、Power supply：AC 90V--250V 2、When it is charging,take the foam out,and keep the cover open . 3、Normally it takes about 3 hours to finish the charging. FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Shenzhen Qi Xin Chuang Zhan Technology Co., LTD Add: Rm 928, Bldg A, Fengtian Industrial Park, No.308, Qinhu Xuegang Bei Rd., Longhua District, Shenzhen, China Tel: 13728763865 Fax: 0755-28073262 Date: 2020-03-18 Dear Sir/Madam, We, Shenzhen Qi Xin Chuang Zhan Technology Co., LTD Hereby declares the following statement , PCB board, circuit, structure and internal of these model(s) are the same, Only model number is different for these model: Product name: Wireless Voice Transmission Device Model No.: EX-100T, EX-100R, EXD-C64, EXD-C32, EXD-CG32, EXD-C16 Sincerely, (Signed) Name / Title: Yun Zhang / Manager Company: Shenzhen Qi Xin Chuang Zhan Technology Co., LTD Address: Rm 928, Bldg A, Fengtian Industrial Park, No.308, Qinhu Xuegang Bei Rd., Longhua District, Shenzhen, China Phone: 13728763865 Fax: 0755-28073262 E-Mail: [email protected]

1/1 CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 <2020-03-18> Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2ANVTEX-100T EX-100T For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. 1/1 Sincerely, (Signed) Name / Title: Yun Zhang / Manager Company: Shenzhen Qi Xin Chuang Zhan Technology Co., LTD Address: Rm 928, Bldg A, Fengtian Industrial Park, No.308, Qinhu Xuegang Bei Rd., Longhua District, Shenzhen, China Phone: 13728763865 Fax: 0755-28073262 E-Mail: [email protected]

Shenzhen Qi Xin Chuang Zhan Technology Co., LTD Rm 928, Bldg A, Fengtian Industrial Park, No.308, Qinhu Xuegang Bei Rd., Longhua District, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 3/18/2020 To whom it may concern: We, Shenzhen Qi Xin Chuang Zhan Technology Co., LTD the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2ANVTEX-100T including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, (Signed) Name / Title: Yun Zhang / Manager Company: Shenzhen Qi Xin Chuang Zhan Technology Co., LTD Address: Rm 928, Bldg A, Fengtian Industrial Park, No.308, Qinhu Xuegang Bei Rd., Longhua District, Shenzhen, China Phone: 13728763865 Fax: 0755-28073262 E-Mail: [email protected]

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANVTEX-100T This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 11 1. EXTERIOR PHOTOGRAPHS Fig. 1 Fig. 2 Receiver Transmitte r SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANVTEX-100T This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 11 Fig. 3 Fig. 4 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANVTEX-100T This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 3 of 11 Fig. 5 Fig. 6 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANVTEX-100T This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 4 of 11 Fig. 7 Fig. 8 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANVTEX-100T This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 5 of 11 Fig. 9 Fig. 10 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANVTEX-100T This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 6 of 11 Fig. 11 Fig. 12 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANVTEX-100T This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 7 of 11 Fig. 13 Fig. 14 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANVTEX-100T This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 8 of 11 Fig. 15 Fig. 16 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANVTEX-100T This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 9 of 11 Fig. 17 Fig. 18 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANVTEX-100T This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 10 of 11 Fig. 19 Fig. 20 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANVTEX-100T This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 11 of 11 Fig. 21 Fig. 22

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANVTEX-100T This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1 LABEL AND LOCATION Size: L2.0cm*W1cm Wireless Voice Transmission Device Model No.: EX-100T FCC ID: 2ANVTEX-100T Operate voltage: DC 5V (Battery: 3.7V, 900mAh) Label And Location

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANVTEX-100T This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 6 1. INTERIOR PHOTOGRAPHS Fig. 1 Fig. 2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANVTEX-100T This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 6 Fig. 3 Fig. 4 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANVTEX-100T This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 3 of 6 Fig. 5 Fig. 6 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANVTEX-100T This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 4 of 6 Fig. 7 Fig. 8 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANVTEX-100T This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 5 of 6 Fig. 9 Fig. 10 Antenna SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANVTEX-100T This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 6 of 6 Fig. 11

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANVTEX-100T ________________________________________________________________________ ___ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 2 FCC RF Exposure Evaluation 1. Product Information EUT : Wireless Voice Transmission Device Test Model : EX-100T Hardware version : V1.0 Software version : V1.0 Power Supply : Transmitter: DC 5V (Battery: 3.7V, 900mAh) Receiver: DC 5V (Battery: 3.7V, 600mAh or 900mAh) Wireless Microphone Operation frequency : 210.3MHz Modulation Type : FM Channel Number : 1 Equipment category : Category 3 Antenna Type : Internal Antenna Antenna Gain : 0dBi (Max.) 2. Evaluation method and Limit According to KDB447498 D01 General RF Exposure Guidance v06 Section 4.3.1 Standalone SAR test exclusion considerations: “Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition, listed below, is satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions.22 The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander (see 5) of section 4.1). To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, typically in the SAR measurement or SAR analysis report, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting is required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for the SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions; for example, handheld PTT two-way radios, handsets, laptops & tablets etc.23 “ [(max. power of channel, including tune-up tolerance, mW)/ (min. test separation distance, mm)] · [√f (GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f (GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to f) in section 4.1 is applied to determine SAR test exclusion. SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANVTEX-100T ________________________________________________________________________ ___ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 2 3. Refer evaluation method ANSI C95.1–1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. FCC KDB publication 447498 D01 General RF Exposure Guidance v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies. FCC CFR 47 part1 1.1310: Radiofrequency radiation exposure limits. FCC CFR 47 part2 2.1093: Radiofrequency radiation exposure evaluation: portable devices 4. Conducted Power Results Test Mode Channel Frequency (MHz) Measured Maximum Peak Power(dBm) Measured Maximum Average Power(dBm) Limits Average (dBm) Verdict FM 1 210.3 4.58 / 24 PASS 5. Manufacturing tolerance GFSK(Peak) Channel Channel 1(210.3MHz) Target(dbm) 5.0 Tolerance ±(dB) 1.0 6. Evaluation Results Band/Mode f (GHz) Antenna Distance (mm) RF output power SAR Test Exclusion Threshold SAR Test Exclusion dBm mW FM 0.2103 5 6.0 3.9811 0.3651 < 3.0 Yes Remark: 1. Output power including tune up tolerance; 2. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to f) in section 4.1 of KDB447498 is applied to determine SAR test exclusion. 7. Conclusion The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v06. .......................THE END OF REPORT.........................

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANVTEX-100T Report No.: LCS191218121AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 27 FCC TEST REPORT For Shenzhen Qi Xin Chuang Zhan Technology Co., LTD Wireless Voice Transmission Device Test Model: EX-100T Additional model: Please refer to page 6 Prepared for : Shenzhen Qi Xin Chuang Zhan Technology Co., LTD Address : Rm 928, Bldg A, Fengtian Industrial Park, No.308, Qinhu Xuegang Bei Rd., Longhua District, Shenzhen, China Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 1/F., Xingyuan Industrial Park, Tongda Road, Bao’an Avenue, Bao’an District, Shenzhen, Guangdong, China Tel : (+86)755-82591330 Fax : (+86)755-82591332 Web : www.LCS-cert.com Mail : [email protected] Date of receipt of test sample : December 23, 2019 Number of tested samples : 1 Serial number : Prototype Date of Test : December 23, 2019~ February 26, 2020 Date of Report : February 28, 2020 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANVTEX-100T Report No.: LCS191218121AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 2 of 27 FCC TEST REPORT FCC CFR 47 PART 74 Report Reference No. ................. : LCS191218121AEA Date of Issue ................................... : February 28, 2020 Testing Laboratory Name ............. : Shenzhen LCS Compliance Testing Laboratory Ltd. Address ........................................... : 1/F., Xingyuan Industrial Park, Tongda Road, Bao’an Avenue, Bao’an District, Shenzhen, Guangdong, China Testing Location/ Procedure ........... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name .......................... : Shenzhen Qi Xin Chuang Zhan Technology Co., LTD Address ........................................... : Rm 928, Bldg A, Fengtian Industrial Park, No.308, Qinhu Xuegang Bei Rd., Longhua District, Shenzhen, China Test Specification Standard .......................................... : FCC CFR 47 PART 74 Test Report Form No. ................... : LCSEMC-1.0 TRF Originator ................................ : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF ..................................... : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. EUT Description. ........................... : Wireless Voice Transmission Device Trade Mark ...................................... : N/A Model/ Type reference .................... : EX-100T Ratings ............................................ : Please refer to page 6 Result ............................................ : Positive Compiled by: Supervised by: Approved by: Jayden Zhuo/ Administrators Jin Wang/ Technique principal Gavin Liang/ Manager SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANVTEX-100T Report No.: LCS191218121AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 3 of 27 FCC -- TEST REPORT Type / Model........................... : EX-100T EUT......................................... : Wireless Voice Transmission Device Applicant............................... : Shenzhen Qi Xin Chuang Zhan Technology Co., LTD Address.................................. : Rm 928, Bldg A, Fengtian Industrial Park, No.308, Qinhu Xuegang Bei Rd., Longhua District, Shenzhen, China Telephone............................... : / Fax.......................................... : / Manufacturer........................ : Shenzhen Qi Xin Chuang Zhan Technology Co., LTD Address................................... : Rm 928, Bldg A, Fengtian Industrial Park, No.308, Qinhu Xuegang Bei Rd., Longhua District, Shenzhen, China Telephone............................... : / Fax.......................................... : / Factory................................... : Shenzhen Qi Xin Chuang Zhan Technology Co., LTD Address................................... : Rm 928, Bldg A, Fengtian Industrial Park, No.308, Qinhu Xuegang Bei Rd., Longhua District, Shenzhen, China Telephone............................... : / Fax.......................................... : / Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCS191218121AEA February 28, 2020 Date of issue SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANVTEX-100T Report No.: LCS191218121AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 4 of 27 Revision History Revision Issue Date Revisions Revised By 000 February 28, 2020 Initial Issue Gavin Liang SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANVTEX-100T Report No.: LCS191218121AEA This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 5 of 27 TABLE OF CONTENTS 1. GENERAL INFORMATION ................................................................................................................................... 6 1.1. DESCRIPTION OF DEVICE (EUT) ........................................................................................................................ 6 1.2. HOST SYSTEM CONFIGURATION LIST…

Text truncated - open the document above for the full version.

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANVTEX-100T _______________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 2 1. TEST SETUP PHOTOGRAPHS Photo of Radiated Emissions Measurement Fig. 1 Fig. 2 TX SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2ANVTEX-100T _______________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 2 Fig. 3 Photo of Conducted Emissions Measurement Fig. 4 RX