2ANXU-TT517-13Wooden box record player

i-box Stylus N10 芯FCCID: 2ANXU-TT517-13 FCC WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a r esidential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occ ur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and o n, the user is encouraged to try to correct the interference by one or more of thefollowing measures: Reorient or relocate the receiving antenna. Increase the separation between the equip ment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equi pment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interfer ence, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exp osure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimu m distance 0cm between the radiator and your body.

Shenzhen Jiayinking Technology Holding Company Limited The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 9/6/2023 To whom it may concern: We, Shenzhen Jiayinking Technology Holding Company Limited hereby certify that the equipment for which authorization is sought (FCC ID: 2ANXU-TT517-13) is not “covered” equipment prohibited from receiving an equipment authorization pursuant to § 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing “covered” equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(b) and (d)(5) and (6). Sincerely, Signature Yan Lu Document control Shenzhen Jiayinking Technology Holding Company Limited 62_[model] CoveredEqu_2.911(d)(5)(i) and (ii) - U, V02

FCC ID: 2ANXU-TT517-13 TB-RF-074-1.0 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of Adapter FCC ID: 2ANXU-TT517-13 TB-RF-074-1.0 Photo 3 Appearance of Adapter Photo 4 Appearance of EUT FCC ID: 2ANXU-TT517-13 TB-RF-074-1.0 Photo 5 Appearance of EUT Photo 6 Appearance of EUT FCC ID: 2ANXU-TT517-13 TB-RF-074-1.0 Photo 7 Appearance of EUT Photo 8 Appearance of EUT FCC ID: 2ANXU-TT517-13 TB-RF-074-1.0 Photo 9 Appearance of EUT

FCC ID: 2ANXU-TT517-13 TB-RF-074-1.0 Appendix IFCC ID Label Size for the label: 30mm X 30mm Appendix II ID Label Location ID LOCATION FCC ID: 2ANXU-TT517-13 Model: TT517-13 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.

FCC ID: 2ANXU-TT517-13 TB-RF-074-1.0 Appendix IV EUT Internal Photographs Photo 10 Internal of EUT Photo 11 Appearance of PCB Antenna FCC ID: 2ANXU-TT517-13 TB-RF-074-1.0 Photo 12 Appearance of PCB Photo 13 Appearance of PCB FCC ID: 2ANXU-TT517-13 TB-RF-074-1.0 Photo 14 Appearance of PCB

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202309-0053-11 Page: 1 of 3 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 RF Exposure Evaluation FCC ID: 2ANXU-TT517-13 1. Client Information Applicant : Shenzhen Jiayinking Technology Holding Company Limited Address : 1102, workshop 1, Tianan Digital Innovation Park, No. 524, Qinglin Road, huanggekeng community, Longcheng street, Longgang District, Shenzhen, China Manufacturer : Jiangxi Jiayinking Culture Technology Company Limited Address : K3-17, Electronical Information Science and Technology Park, Longnan Technical Economic Development Area, Ganzhou City, Jiangxi Province, China 2. General Description of EUT EUT Name : Wooden box record player Model(s) No. : TT517-13 Series Model No. : Stylus N10, TT517-3 Model Different : All these models are identical in the same PCB, layout and electrical circuit, the only difference is appearance and model name. Sample ID : HC-C-202309-0053-01-01-1#&HC-C-202309-0053-01-01-2# Product Description : Operation Frequency: Bluetooth 5.0: 2402MHz~2480MHz Number of Channel: 79 channels Antenna Gain: 3.38dBi PCB Antenna Power Supply : Adapter #1(MC24A-120200U) Input: 100~240V~50/60Hz 0.75A MAX Output: 12.0V2.0A Adapter #2(GKYZD0200120US) Input: 100~240V~50/60Hz 0.8A MAX Output: 12.0V2.0A Software Version : 1.0 Hardware Version : 1.0 Remark: The antenna gain provided by the applicant, the adapter and verified for the RF conduction test and adapter provided by TOBY test lab. Note: More test information about the EUT please refer the RF Test Report. Report No.: TBR-C-202309-0053-11 Page: 2 of 3 TB-RF-074-1.0 The RF Exposure Evaluation for FCC: SAR Test Exclusion Calculations FCC: According to 447498 D04 Interim General RF Exposure Guidance v01. The SAR-based exemption formula of § 1.1307(b)(3)(i)(B), repeated here as Formula (B.2), applies for single fixed, mobile, and portable RF sources with available maximum time-averaged power or effective radiated power (ERP), whichever is greater, of less than or equal to the threshold P th (mW). This method shall only be used at separation distances from 0.5 cm to 40 cm and at frequencies from 0.3 GHz to 6 GHz (inclusive). P th is given by Formula (B.2). and f is in GHz, d is the separation distance (cm), and ERP 20cm is per Formula (B.1). The example values shown in Table B.2 are for illustration only. Table B.2—Example Power Thresholds (mW) Report No.: TBR-C-202309-0053-11 Page: 3 of 3 TB-RF-074-1.0 Calculation: Test separation: 5mm Bluetooth Mode (GFSK) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mW) Limit P th (mW) 2.402 2.50 2±1 3 1.995 3 2.441 3.34 3±1 4 2.512 3 2.480 1.93 1±1 2 1.585 3 Bluetooth Mode (π/4-DQPSK) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mw) Limit P th (mW) 2.402 2.35 2±1 3 1.995 3 2.441 3.35 3±1 4 2.512 3 2.480 2.00 2±1 3 1.995 3 Bluetooth Mode (8-DPSK) 2.402 2.37 2±1 3 1.995 3 2.441 3.37 3±1 4 2.512 3 2.480 1.90 1±1 2 1.585 3 The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 D04, No SAR is required. -----END OF THE REPORT-----

Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202309-0053-1 Page: 1 of 46 FCC ID: 2ANXU-TT517-13 TB-RF-074-1.0 RF Test Data for Bluetooth (BR+EDR) (Conducted Measurements) General Description of EUT Product Name: Wooden box record player Test Model: TT517-13 Sample ID: HC-C-202309-0053-01-01-2# Environmental Conditions Temperature: 23.8°C Relative Humidity: 48% Test Voltage: DC 12V Test Engineer: Huang jian ping Note: For a more detailed features description, please refer to the report TBR-C-202309-0053-1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202309-0053-1 Page: 2 of 46 FCC ID: 2ANXU-TT517-13 TB-RF-074-1.0 Contents 1. 20dB Emission Bandwidth ..................................................................................................... 3 1.1.Test Result ................................................................................................................ 3 1.2.Test Graphs .............................................................................................................. 4 2. Occupied Channel Bandwidth ............................................................................................... 7 2.1.Test Result ................................................................................................................ 7 2.2.Test Graphs .............................................................................................................. 8 3. Maximum conducted output power ................................................................................... 11 3.1.Test Result .............................................................................................................. 11 3.2.Test Graphs ............................................................................................................ 12 4. Carrier frequency separation .............................................................................................. 15 4.1.Test Result .............................................................................................................. 15 4.2.Test Graphs ............................................................................................................ 16 5. Time of occupancy .............................................................................................................. 17 5.1.Test Result .............................................................................................................. 17 5.2.Test Graphs ............................................................................................................ 18 6. Number of hopping channels .............................................................................................. 21 6.1.Test Result .............................................................................................................. 21 6.2.Test Graphs ............................................................................................................ 22 7.Band edge measurements ................................................................................................... 23 7.1.Test Result .............................................................................................................. 23 7.2.Test Graphs ............................................................................................................ 24 8. Conducted Spurious Emission ............................................................................................. 28 8.1.Test Result .............................................................................................................. 28 8.2.Test Graphs ............................................................................................................ 29 9. Duty Cycle ............................................................................................................................ 38 9.1.Test Result .............................................................................................................. 38 9.2.Test Graphs ............................................................................................................ 39 10. Emissions in Restricted Bands ........................................................................................... 42 10.1.Test Result ............................................................................................................ 42 10.2.Test Graphs .......................................................................................................... 43 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202309-0053-1 Page: 3 of 46 FCC ID: 2ANXU-TT517-13 TB-RF-074-1.0 1. 20dB Emission Bandwidth 1.1.Test Result TestMode Antenna Channel 20db EBW[MHz] Limit[MHz] Verdict DH5 Ant1 2402 1.07 --- --- 2441 1.06 --- --- 2480 1.04 --- --- 2DH5 Ant1 2402 1.31 --- --- 2441 1.32 --- --- 2480 1.31 --- --- 3DH5 Ant1 2402 1.31 --- --- 2441 1.30 --- --- 2480 1.31 --- --- Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202309-0053-1 Page: 4 of 46 FCC ID: 2ANXU-TT517-13 TB-RF-074-1.0 1.2.Test Graphs DH5_Ant1_2402 DH5_Ant1_2441 DH5_Ant1_2480 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202309-0053-1 Page: 5 of 46 FCC ID: 2ANXU-TT517-13 TB-RF-074-1.0 2DH5_Ant1_2402 2DH5_Ant1_2441 2DH5_Ant1_2480 3DH5_Ant1_2402 Shenzhen Toby Technology Co.,…

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202309-0053-1 Page: 31 of 46 FCC ID: 2ANXU-TT517-13 TB-RF-074-1.0 DH5_Ant1_2480_30~1000 DH5_Ant1_2480_1000~26500 2DH5_Ant1_2402_0~Reference Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202309-0053-1 Page: 32 of 46 FCC ID: 2ANXU-TT517-13 TB-RF-074-1.0 2DH5_Ant1_2402_30~1000 2DH5_Ant1_2402_1000~26500 2DH5_Ant1_2441_0~Reference Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202309-0053-1 Page: 33 of 46 FCC ID: 2ANXU-TT517-13 TB-RF-074-1.0 2DH5_Ant1_2441_30~1000 2DH5_Ant1_2441_1000~26500 2DH5_Ant1_2480_0~Reference Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202309-0053-1 Page: 34 of 46 FCC ID: 2ANXU-TT517-13 TB-RF-074-1.0 2DH5_Ant1_2480_30~1000 2DH5_Ant1_2480_1000~26500 3DH5_Ant1_2402_0~Reference Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202309-0053-1 Page: 35 of 46 FCC ID: 2ANXU-TT517-13 TB-RF-074-1.0 3DH5_Ant1_2402_30~1000 3DH5_Ant1_2402_1000~26500 3DH5_Ant1_2441_0~Reference Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202309-0053-1 Page: 36 of 46 FCC ID: 2ANXU-TT517-13 TB-RF-074-1.0 3DH5_Ant1_2441_30~1000 3DH5_Ant1_2441_1000~26500 3DH5_Ant1_2480_0~Reference Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202309-0053-1 Page: 37 of 46 FCC ID: 2ANXU-TT517-13 TB-RF-074-1.0 3DH5_Ant1_2480_30~1000 3DH5_Ant1_2480_1000~26500 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202309-0053-1 Page: 38 of 46 FCC ID: 2ANXU-TT517-13 TB-RF-074-1.0 9. Duty Cycle 9.1.Test Result TestMode Antenna Channel Transmission Duration [ms] Transmission Period [ms] Duty Cycle [%] 1/T [kHz] Limit Verdict DH5 Ant1 2402 2.89 3.75 77.07 0.346 --- --- 2441 2.89 3.75 77.07 0.346 --- --- 2480 2.89 3.75 77.07 0.346 --- --- 2DH5 Ant1 2402 2.88 3.74 77.01 0.347 --- --- 2441 2.89 3.75 77.07 0.346 --- --- 2480 2.88 3.74 77.01 0.347 --- --- 3DH5 Ant1 2402 2.89 3.75 77.07 0.346 --- --- 2441 2.89 3.75 77.07 0.346 --- --- 2480 2.89 3.75 77.07 0.346 --- --- Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202309-0053-1 Page: 39 of 46 FCC ID: 2ANXU-TT517-13 TB-RF-074-1.0 9.2.Test Graphs DH5_Ant1_2402 DH5_Ant1_2441 DH5_Ant1_2480 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202309-0053-1 Page: 40 of 46 FCC ID: 2ANXU-TT517-13 TB-RF-074-1.0 2DH5_Ant1_2402 2DH5_Ant1_2441 2DH5_Ant1_2480 3DH5_Ant1_2402 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202309-0053-1 Page: 41 of 46 FCC ID: 2ANXU-TT517-13 TB-RF-074-1.0 3DH5_Ant1_2441 3DH5_Ant1_2480 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202309-0053-1 Page: 42 of 46 FCC ID: 2ANXU-TT517-13 TB-RF-074-1.0 10. Emissions in Restricted Bands 10.1.Test Result TestMode Antenna ChName Channel Detector Freq. [MHz] Result [dBm] Limit [dBm] Verdict DH5 Ant1 Low 2402 AV 2310.000 -63.26 ≤-41.20 PASS AV 2353.870 -49.26 ≤-41.20 PASS AV 2390.000 -57.87 ≤-41.20 PASS Peak 2310.000 -51.54 ≤-21.20 PASS Peak 2378.065 -44.47 ≤-21.20 PASS Peak 2390.000 -48.12 ≤-21.20 PASS High 2480 AV 2483.500 -59.1 ≤-41.20 PASS AV 2485.188 -56.47 ≤-41.20 PASS AV 2500.000 -61.74 ≤-41.20 PASS Peak 2483.500 -50.66 ≤-21.20 PASS Peak 2485.304 -46.91 ≤-21.20 PASS Peak 2500.000 -49.89 ≤-21.20 PASS 2DH5 Ant1 Low 2402 AV 2310.000 -63.14 ≤-41.20 PASS AV 2353.870 -54.12 ≤-41.20 PASS AV 2390.000 -61.01 ≤-41.20 PASS Peak 2310.000 -51.8 ≤-21.20 PASS Peak 2379.587 -44.78 ≤-21.20 PASS Peak 2390.000 -51.28 ≤-21.20 PASS High 2480 AV 2483.500 -60.05 ≤-41.20 PASS AV 2485.188 -58.93 ≤-41.20 PASS AV 2500.000 -61.55 ≤-41.20 PASS Peak 2483.500 -50.78 ≤-21.20 PASS Peak 2485.768 -47.54 ≤-21.20 PASS Peak 2500.000 -50.33 ≤-21.20 PASS 3DH5 Ant1 Low 2402 AV 2310.000 -63.29 ≤-41.20 PASS AV 2353.870 -53.91 ≤-41.20 PASS AV 2390.000 -60.76 ≤-41.20 PASS Peak 2310.000 -51.55 ≤-21.20 PASS Peak 2388.413 -44.99 ≤-21.20 PASS Peak 2390.000 -48.99 ≤-21.20 PASS High 2480 AV 2483.500 -60.16 ≤-41.20 PASS AV 2485.188 -58.72 ≤-41.20 PASS AV 2500.000 -61.95 ≤-41.20 PASS Peak 2483.500 -50.45 ≤-21.20 PASS Peak 2484.609 -48.18 ≤-21.20 PASS Peak 2500.000 -51.11 ≤-21.20 PASS Note： 1. The Antenna Gain is compensated in the graph. 2. The limit in dBm for average detector is conversion from 54dBuV/m, according to 15.209(a). The limit in dBm for peak detector is 20dB above the limit of average detector in dBm. Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, G…

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202309-0053-1 Page: 1 of 50 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 RF Test Report FCC ID: 2ANXU-TT517-13 Report No. : TBR-C-202309-0053-1 Applicant : Shenzhen Jiayinking Technology Holding Company Limited Equipment Under Test (EUT) EUT Name : Wooden box record player Model No. : TT517-13 Series Model No. : Stylus N10, TT517-3 Brand Name : ---- Sample ID : HC-C-202309-0053-01-01-1#&HC-C-202309-0053-01-01-2# Receipt Date : 2023-09-11 Test Date : 2023-09-11 to 2023-09-20 Issue Date : 2023-09-20 Standards : FCC Part 15 Subpart C 15.247 Test Method : ANSI C63.10: 2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above. Witness Engineer : Wade. Lv Engineer Supervisor : Ivan Su Engineer Manager : Ray Lai This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TBR-C-202309-0053-1 Page: 2 of 50 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT.............................................................................. 5 1.1 Client Information ................................................................................................................. 5 1.2 General Description of EUT (Equipment Under Test) ................................................... 5 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 8 1.4 Description of Support Units .............................................................................................. 8 1.5 Description of Test Mode .................................................................................................... 9 1.6 Description of Test Software Setting .............................................................................. 10 1.7 Measurement Uncertainty ................................................................................................ 10 1.8 Test Facility ......................................................................................................................... 11 2. TEST SUMMARY ..................................................................................................................... 12 3. TEST SOFTWARE ................................................................................................................... 12 4. TEST EQUIPMENT .................................................................................................................. 13 5. CONDUCTED EMISSION ....................................................................................................... 14 5.1 Test Standard and Limit .................................................................................................... 14 5.2 Test Setup ........................................................................................................................... 14 5.3 Test Procedure ................................................................................................................... 14 5.4 Deviation From Test Standard ......................................................................................... 15 5.5 EUT Operating Mode ........................................................................................................ 15 5.6 Test Data ............................................................................................................................. 15 6. RADIATED AND CONDUCTED UNWANTED EMISSIONS ............................................ 16 6.1 Test Standard and Limit .................................................................................................... 16 6.2 Test Setup ........................................................................................................................... 17 6.3 Test Procedure ................................................................................................................... 18 6.4 Deviation From Test Standard ......................................................................................... 19 6.5 EUT Operating Mode ........................................................................................................ 19 6.6 Test Data ............................................................................................................................. 19 7. EMISSIONS IN RESTRICTED BANDS ............................................................................... 20 7.1 Test Standard and Limit .................................................................................................... 20 7.2 Test Setup ........................................................................................................................... 20 7.3 Test Procedure ................................................................................................................... 21 7.4 Deviation From Test Standard ......................................................................................... 22 7.5 EUT Operating Mode ........................................................................................................ 22 7.6 Test Data ............................................................................................................................. 22 8. 99% OCCUPIED AND 20DB BANDWIDTH ........................................................................ 23 8.1 Test Standard and Limit ........................................................…

Text truncated - open the document above for the full version.

version01 Shenzhen Jiayinking Technology Holding Company Limited Declaration concerning Antenna Specification It is hereby declared that the product Model No.: TT517-13, Stylus N10, TT517-3 FCC ID: 2ANXU-TT517-13 fulfills the requirement in FCC test relating to the antenna type. The device specified above confirms to the FCC recommendations for PCB antenna type(s) described below: Antenna No. Model No. of antenna: Type of antenna: Gain of the antenna (Max.) Frequency range: Bluetooth / PCB Antenna 3.38dBi for 2402-2480MHz; The mounting of the antenna is fixed to the radio module and no other antenna should be used. Company name: Shenzhen Jiayinking Technology Holding Company Limited Address: A1102, workshop 1, Tianan Digital Innovation Park, No. 524, Qinglin Road, huanggekeng community, Longcheng street, Longgang District, Shenzhen, China Place: Yan Lu Date: 2023-8-31 Signature:

N c v NOTE: This doc company. The te validation and in MORLA App PRO MO TRA BRA STA REC TES ISS cument is issue est results appl nformation confi AB SHENZ FL1-3, B Block67 plicant ODUCT NA ODEL NAM ADE NAM AND NAM ANDARD(S CEIPT DAT ST DATE SUE DATE ed by MORLAB y only to the pa rmed at our we ZHEN MORLAB COM Building A, FeiYang S 7, BaoAn District, She TE : AME : ME : E : ME : S) : ATE : : : B, the test repo articular sample bsite. MMUNICATIONS TEC Science Park, No.8 L enZhen , GuangDon EST SHANGHA MV_BP10 MV_BP10 MVSILICO MVSILICO ANSI/IEEE 2019-08-3 2019-09-0 2019-10-1 Edited Approved rt shall not be e(s) tested and CHNOLOGY Co., Ltd LongChang Road, g Province, P. R. Ch T RE AI MOUNT 0xx PCB An 0 ON ON E Std 149- 30 02 15 d by: by: reproduced exc to the specific d. ina Te l : 8 Http:/ RE EPOR TAIN VIEW ntenna -2008 Chi Sh Andy Yeh cept in full with tests carried o u 86-755-36698555 //www.morlab.cn EPORT No RT W SILICON ide(Rappo h(Technica out prior written ut which is avai Fax: 86-755-3669 E-mail: service@ o.：SZ190 CO,. LTD orteur) l Director) n permission of lable on reques 98525 @morlab.cn Page 1 of 1 080340E01 f the st for 4 1 MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 2 of 14 REPORT No.：SZ19080340E01 DIRECTORY 1. Technical Information ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 3 1.1. Manufacturer and Factory Information ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 3 1.2. Equipment Under Test (EUT) Description ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 3 2. Test Results ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 4 2.1. Applied Reference Documents ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 4 2.2. Test Conditions ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 4 2.3. Test Results lists ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 4 Annex A Photographs ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 6 Annex B Figures ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 7 1. 2D Radiation Pattern ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 7 2. 3D Radiation Pattern ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 9 3. Return Loss ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 10 4. VSWR ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 11 5. Input Impedance ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 11 Annex C Photographs ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 12 Annex D General Information ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 14 1.1 Identification of the Responsible Testin…

Text truncated - open the document above for the full version.