2ANYD-SHS2438ROTATING SUSPENSION LAMP

Basic Operating Functions Product Structure Instructions for use Wave Control Sensor Lithium battery (Red light on when charging, off when fully charged ) USB Type-C Power Indicator ( Power on light on, off light off ) Main Switch Wireless Charging Indicator 旋转悬浮台灯英文，打开210*140mm，折好70*140mm 正面 Desk lamp function: Plug in the USB Type-C cable and turn on the power, the Li-ion battery charging indicator will light and the product will enter the charging state. When the battery is fully charged, the lithium battery charging indicator turns off. The base button is the lamp power switch, used to turn the lamp power on and off. Briefly press the button to turn on the power, the left power indicator light will turn on the power, briefly press the button again to turn off the power, the left power indicator light will turn off the power. After the whole machine power on, the left side of the power indicator light is always on, the lamp light a variety of working modes and rotary control are by the palm of the hand swung over the top of the lamp (palm of the hand swung over the top of the lamp about the distance of 5cm) control: A. Light control (palm wave over the top of the lamp for about 1 second) 1. Wave your palm across the top of the lamp and the white light comes on. 2. Swing over the white light switch again and the colored lights begin to automatically cycle through the color changes. 3. Swing back and forth again left and right or right and left to stop the automatic cyclic color change at the current color fixation. 4. Swing back and forth again left and right or right and left, fixing the red color. 5. Swing back and forth left and right or right and left again, fixing the green color. 6. Swing back and forth again left and right or right and left, fixing the blue color. 7. Swing back and forth across left and right or right and left again to continue the automatic cycle of color change. Note : In any of the colored light modes above. Wave again. The light will turn off. B. Rotary control (when plugging in the charging cable in the connection condition, the desk lamp will automatically turn off the rotary function) Under the condition that the charger cable is not connected: Swing your palm over the top of the lamp (hold your palm over the top of the lamp for about 2 seconds), and the lamp will turn on automatic rotation. Wave your palm over the top of the lamp again (hold your palm over the top of the lamp for about 2 seconds), the lamp will stop rotating. Wireless charging capability: The USB Type-C cable and power adapter are connected to the product and powered on after the wireless charging indicator on the right side of the base button shows the information: Green light always on --- wireless charger working power on Blue Breathing Light --- Wireless charger is charging normally (charging icon on the phone shows charging in progress) The green light is on again --- the battery is fully charged and the charging process is finished. Blue light flashing --- FOD on detection alarm, wireless charging transmitter position has metal foreign objects Note: The built-in battery does not output discharge to the wireless charging function. 1. The power will automatically turn off if there is no light and the rotation is stopped for 5 minutes.If you want to continue using the lamp, you should press the main switch button again to turn on the lamp. 2. When using this product, please use the output voltage DC 5V/3A, 9V/2A or 12V/1.5A adapter. 3. When using the actual power less than 15W (current 3A) power adapter and type-C charging cable for emergency use, there is a possibility of anomalies (the product may have insufficient power supply, resulting in performance or parameters may show instability). This is not a product failure and is a result of improper use. 4. When using wireless charging, to achieve the best results and higher charging efficiency, please note that the wireless receiving position of the mobile phone should be moved as far as possible to overlap with the wireless charging transmitting position of the product. CaveatSpecifications Product Characteristics 1.When the charger cable is plugged in under the connection condition, the lamp will automatically turn off the rotation function. 2.The built-in battery will not discharge to the wireless charging function without the charging cable connected. 3.Do not place metal objects between the wireless charging area and the charging mobile phone. 4.This product may light or extinguish under strong electromagnetic wave interference. 5.The light source of this lamp is irreplaceable; when the light source reaches the end of its life, the entire lamp should be replaced. 6.When using, please make sure that the voltage of the charged device is compatible with this product. 7.When using, charging or storing this product, if there is abnormal odor, high temperature (the temperature is slightly higher in normal use, but should not be hot), color or shape change and other abnormal phenomena, you should stop using it immediately and contact the dealer. 8.When using this product to charge mobile phones and digital devices, please make sure that the charging status is displayed on the charger to ensure that the product has been working properly. 9.Users do not properly use or improperly place the product or material self-consumption may lead to shortened life or damage to the product, and therefore the responsibility brought about by the warranty does not belong to the responsibility, please understand! 10.Please make sure that the optional models and mobile phones have wireless charging function. 11.Please use the AC adapter according to the specified power, if the power is low, it may cause instability or abnormal phenomena. 12.Mobile phone product upgrades and rapid iteration, please pay attention to our synchronization of new products. 反面 1.Wireless output power 5W, 7.5W, 10W, 15W intelligent detection 2. Safe charging, compatible with mains…

Text truncated - open the document above for the full version.

ShenzhenSanheshengElectronicCO.,LTD. 2.911(d)(5)(i)EquipmentTypeAttestationv1.2 Section2.911(d)(5)(i)Certification–EquipmentType Companyname:ShenzhenSanheshengElectronicCO.,LTD. Address:Room205,YuxingTechnologyParkBuilding,ThirdIndustrialZone,NanchangCommunity, XixiangStreet,Bao'anDistrict,Shenzhen,China ProductName:ROTATINGSUSPENSIONLAMP FCCID:2ANYD-SHS2438 Model(s):SHS-2438 2.911(d)(5)(i)EquipmentType We,[ShenzhenSanheshengElectronicCO.,LTD.](“theapplicant”)certifythattheequipmentfor whichauthorizationissoughtthroughcertificationisnot:  Prohibitedfromreceivinganequipmentauthorizationpursuantto§2.903;oftheFCCrules.  Identifiedasanequipmenttypeinthe“CoveredList” NOTE1 Yourssincerely, Name:MrsusanluoDate:06-17-2024 TitleandCompanyname:manager/ShenzhenSanheshengElectronicCO.,LTD. NOTE1 “CoveredList”;istheListofEquipmentandServicesCoveredBySection2ofTheSecureNetworksAct,availableat https://www.fcc.gov/supplychain/coveredlist References; 1)986446D01CoveredEquipmentv01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2)FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

ShenzhenSanheshengElectronicCO.,LTD. 2.911(d)(5)(ii)ApplicantAttestationv1.3 Section2.911(d)(5)(ii)Certification–Applicant(CoveredList) Companyname:ShenzhenSanheshengElectronicCO.,LTD. Address:Room205,YuxingTechnologyParkBuilding,ThirdIndustrialZone,NanchangCommunity, XixiangStreet,Bao'anDistrict,Shenzhen,China ProductName:ROTATINGSUSPENSIONLAMP FCCID:2ANYD-SHS2438 Model(s):SHS-2438 2.911(d)(5)(ii)Applicantfiling We,[ShenzhenSanheshengElectronicCO.,LTD.](“theapplicant”)certifythat,asofthedateofthe filingoftheapplication,theapplicantisnotidentified NOTE1 onthe“CoveredList” NOTE2 ,established pursuantto§1.50002ofthischapter,asanentityproducingcoveredcommunicationsequipment. Yourssincerely, Name:MrsusanluoDate:06-17-2024 TitleandCompanyname:manager/ShenzhenSanheshengElectronicCO.,LTD. NOTE1 Deleteoptionnotapplicabletothisapplication. NOTE2 “CoveredList”;istheListofEquipmentandServicesCoveredBySection2ofTheSecureNetworksAct,availableat https://www.fcc.gov/supplychain/coveredlist References; 1)986446D01CoveredEquipmentv01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2)FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

ShenzhenSanheshengElectronicCO.,LTD. U.S.AgentLetterofAttestation To:FederalCommunicationsCommission 7435OaklandMillsRoad,Columbia,MD21046,USA Date:06-17-2024 Ref:AttestationStatement–Part2.911(d)(7)filing FCCID:2ANYD-SHS2438 ShenzhenSanheshengElectronicCO.,LTD.(“theapplicant”)certifiesthat,asofthedateofthefiling oftheapplication,THREESTONESMEDIALLC(“theagent”)isourdesignatedU.S.agentfor serviceofprocessfortheabovereferenceFCCID.Theapplicantacceptstomaintainanagentfor serviceofprocessintheUnitedStatesfornolessthanoneyearaftereitherthegranteehas permanentlyterminatedallmarketingandimportationoftheapplicableequipmentwithintheU.S., ortheconclusionofanyCommission-relatedadministrativeorjudicialproceedinginvolvingthe equipment,whicheverislater.Theapplicantfurtheracknowledgesitisourresponsibilitytoinform theFCCwhenevertheagentinformationchanges. THREESTONESMEDIALLC("theagent)understanditistheagent'sobligationtoacceptservice ofprocessintheUnitedStatesformattersrelatedtotheapplicableequipment,andatthephysical U.S.addressandemailaddress. DesignatedU.S.Agent CompanyName: THREESTONESMEDIALLC FRN:0033401761 GC:2A99E Address: 1200BroadwaySt.APT329,LosAngeles,CA90015 Signature: ContactPerson:SijieZhang Tel:+12679093692 Applican Email: [email protected] t CompanyName:ShenzhenSanheshengElectronicCO.,LTD. Address: Room205,YuxingTechnologyParkBuilding,Third IndustrialZone,NanchangCommunity,XixiangStreet, Bao'anDistrict,Shenzhen,China Signature: ContactPerson:Mrsusanluo FRN:0026903385 GC:2ANYD Tel:+86-0755-29081907Email:[email protected]

ShenzhenSanheshengElectronicCO.,LTD. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:06-17-2024 Subject;RequestforConfidentiality FCCID:2ANYD-SHS2438 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthesedocuments mightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantageinthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:Mrsusanluo Title:manager

ShenzhenSanheshengElectronicCO.,LTD. LetterofAuthorization Company:ShenzhenSanheshengElectronicCO.,LTD. Address:Room205,YuxingTechnologyParkBuilding,ThirdIndustrial Zone,NanchangCommunity,XixiangStreet,Bao'anDistrict,Shenzhen,China ProductName:ROTATINGSUSPENSIONLAMP ModelNumber(s):SHS-2438 ProductDescription:ROTATINGSUSPENSIONLAMP WeauthorizeMiCOMLabsInc.,575BoulderCourt,Pleasanton,California94566,USA, toactonourbehalfonallmattersconcerningthecertificationofabovenamed equipment. WedeclarethatMiCOMLabsInc.isallowedtoforwardallinformationrelatedtothe approvalandcertificationofequipmenttotheregulatoryagenciesasrequiredandto discussanyissuesconcerningtheapprovalapplication.Anyandallactscarriedoutby MiCOMLabsonourbehalfshallhavethesameeffectasactsofourown. Signature:Date:06-17-2024 Name:Mrsusanluo Title:manager Company:ShenzhenSanheshengElectronicCO.,LTD.

FCCID:2ANYD-SHS2438 FCCID:2ANYD-SHS2438 FCCID:2ANYD-SHS2438 FCCID:2ANYD-SHS2438

FCCID:2ANYD-SHS2438 Label Size:127mm*127mm FCCID:2ANYD-SHS2438

FCCID:2ANYD-SHS2438 FCCID:2ANYD-SHS2438 FCCID:2ANYD-SHS2438 FCCID:2ANYD-SHS2438

— 1 — RFExposureevaluation FCCID2ANYD-SHS2438 ProductName ROTATINGSUSPENSIONLAMP Model/TypereferenceSHS-2438 ExposurecategoryGeneralpopulation/uncontrolledenvironment EUTTypeProductionUnit DeviceTypeMobileDevice 1.Reference ANSIC95.1–1999:IEEEStandardforSafetyLevelswithRespecttoHumanExposureto RadioFrequencyElectromagneticFields,3kHzto300GHz. FCCKDBpublication680106D01RFExposureWirelessChargingAppsv04:RFExposure ConsiderationsforLowPowerConsumerWirelessPowerTransferApplications FCCCFR47part11.1310:Radiofrequencyradiationexposurelimits. FCCCFR47part22.1091:Radiofrequencyradiationexposureevaluation:mobiledevices FCCCFR47part18.107:Indusial,Scientific,andMedicalEquipment 2.Limit LimitsforMaximumPermissibleExposure(MPE)/ControlledExposure Frequency Range(MHz) ElectricField Strength(V/m) MagneticField Strength(A/m) PowerDensity (mW/cm²) Averaging Time (minute) LimitsforOccupational/ControlledExposure 0.3-3.06141.63*1006 3.0-301842/f4.89/f*900/f 2 6 30-30061.40.1631.06 300-1,500//f/3006 1,500-100,000//56 LimitsforMaximumPermissibleExposure(MPE)/UncontrolledExposure Frequency Range(MHz) ElectricField Strength(V/m) MagneticField Strength(A/m) PowerDensity (mW/cm²) Averaging Time (minute) LimitsforGeneralPopulation/UncontrolledExposure 0.3-1.346141.63*10030 1.34-30824/f2.19/f*180/f 2 30 30-30027.50.0730.230 300-1,500//f/150030 1,500-100,000//1.030 — 2 — F=frequencyinMHz *=Plane-waveequivalentpowerdensity AccordingtoFCCKDB680106D01Section3.RFExposureRequirementsclause3the Emission-Limitsinthefrequencyrangefrom100KHzto300KHzshouldbeassessed versusthelimitsat300KHzinTable1ofCFR47–Section1.310asfollowing(measured distanceshallbe15cmfromthecenteroftheprobetotheedgeofthedevice): E-Field*/*B-Field FrequencyV/mA/muT 0.3MHz–3.0MHz6141.6132.0 3.0MHz–30MHz824/f(=27.5 30MHz )2.19/f(=0.073 30MHz )-- AKDBinquirewasrequiredtodetermine/confirmtheapplicablelimitsbelow100kHz. 3.TestSetupDiagram — 3 — 4.TestEquipment EquipmentManufacturerModelSerialno. Calibrated date Calibrated Due ExposureLevel Tester NardaELT-400N-07132024-1-072025-1-06 B-FieldProbeNardaELT-400M-11542024-1-072025-1-06 5.SupportequipmentList ManufacturerDescriptionModelSerialNumber HonorPhoneV30pro-- HuaweiAdapterHW-05002000C-- Note:Auxiliaryequipmentisprovidedbythelaboratory. 6.MeasurementProcedure a)TheRFexposuretestwasperformedon360degreeturntableinanechoicchamber. b)Themeasurementprobewasplacedattestdistance(15cmand20cm)whichis betweentheedgesofthechargerandthegeometriccenterofprobe. c)Theturntablewasrotated360ddegreetosearchofhigheststrength. d)Thehighestemissionlevelwasrecordedandcomparedwithlimitassoonas measurementofeachpoints(A,B,C,D,E)werecompleted. e)TheEUTweremeasuredaccordingtothedictatesofKDB680106D01v04. — 4 — 7.EquipmentApprovalConsiderations TheEUTdoescomplywithitem5.2ofKDB680106D01v04asfollowstable; RequirementsofKDB680106D01Yes/NoDescription Powertransferfrequencyislessthan1 MHz Yes Thedeviceoperateinthefrequency range110.1kHz-205kHz Theoutputpowerfromeach transmittingelement(e.g.,coil)isless thanorequalto15watts. Yes Themaximumoutputpowerofthe primarycoilis15W. Aclientdeviceprovidingthemaximum permittedloadisplacedinphysical contactwiththetransmitter(i.e.,the surfacesofthetransmitterandclient deviceenclosuresneedtobein physicalcontact) Yes Clientdeviceisplaceddirectlyin contactwiththetransmitter. Only§2.1091-Mobileexposure conditionsapply(i.e.,thisprovision doesnotcover§2.1093-Portable exposureconditions). YesEUTisamobiledevice TheE-fieldandH-fieldstrengths,at andbeyond20cmsurroundingthe devicesurface,aredemonstratedtobe lessthan50%oftheapplicableMPE limit,perKDB447498,Table1.These measurementsshallbetakenalongthe principalaxesofthedevice,withone axisorientedalongthedirectionofthe estimatedmaximumfieldstrength,and forthreepointsperaxisoruntila1/d (inversedistancefromtheemitter structure)fieldstrengthdecayis observed.Symmetryconsiderations maybeusedfortestreduction purposes.Thedeviceshallbeoperated indocumentedworst-casecompliance scenarios(i.e.,theonesthatleadtothe maximumfieldcomponents),andwhile alltheradiatingstructures(e.g.,coilsor antennas)thatbydesigncan simultaneouslytransmitareenergized attheirnominalmaximumpower. YesFulfilrequirements Forsystemswithmorethanone radiatingstructure,theconditions specifiedin(5)mustbemetwhenthe YesEUThasonlyonecoil — 5 — systemisfullyloaded(i.e.,clients absorbingmaximumpoweravailable), andwithalltheradiatingstructures operatingatmaximumpoweratthe sametime,asperdesignconditions.If thedesignallowsoneormoreradiating structurestobepoweredatahigher levelwhileotherradiatingstructures arenotpowered,thenthosecases mustbetestedaswell.Forinstance,a devicemayusethreeRFcoilspowered at5W,oronecoilpoweredat15W:in thiscase,bothscenariosshallbe tested. — 6 — 8.EandHfieldStrength TestModes Mode1AC/DCAdapter(DC5V/3A)+EUT+Mobilephone(BatteryStatus:<1%)Pre-tested Mode2AC/DCAdapter(DC5V/3A)+EUT+Mobilephone(BatteryStatus:<50%)Pre-tested Mode3 AC/DCAdapter(DC5V/3A)+EUT+Mobilephone(BatteryStatus: <100%) Pre-tested Mode4AC/DCAdapter(DC9V/2A)+EUT+Mobilephone(BatteryStatus:<1%)Pre-tested Mode5 AC/DCAdapter(DC9V/2A)+EUT+Mobilephone(BatteryStatus: <50%) Pre-tested Mode6 AC/DCAdapter(DC9V/2A)+EUT+Mobilephone(BatteryStatus: <100%) Pre-tested Mode7 AC/DCAdapter(DC12V/1.5A)+EUT+Mobilephone(BatteryStatus: <1%) Record Mode8 AC/DCAdapter(DC12V/1.5A)+EUT+Mobilephone(BatteryStatus: <50%) Record Mode9 AC/DCAdapter(DC12V/1.5A)+EUT+Mobilephone(BatteryStatus: <100%) Record Mode10EUT+Mobilephone(WirelessOutput:5W(BatteryStatus:<1%))Pre-tested Mode11EUT+Mobilephone(WirelessOutput:5W(BatteryStatus:<50%))Pre-tested Mode12EUT+Mobilephone(WirelessOutput:5W(BatteryStatus:<100%))Pre-tested Mode13EUT+Mobilephone(WirelessOutput:7.5W(BatteryStatus:<1%))Pre-tested Mode14EUT+Mobilephone(WirelessOutput:7.5W(BatteryStatus:<50%))Pre-tested Mode15EUT+Mobilephone(WirelessOutput:7.5W(BatteryStatus:<100%))Pre-tested Mode16EUT+Mobilephone(WirelessOutput:10W(BatteryStatus:<1%))Pre-tested Mode17EUT+Mobilephone(WirelessOutput:10W(BatteryStatus:<50%))Pre-…

Text truncated - open the document above for the full version.

1 ApplicantShenzhen Sanhesheng Electronic CO.,LTD. AddressRoom 205,Yuxing Technology Park Building,Third Industrial Zone,Nanchang Community,Xixiang Street,Bao'an District,Shenzhen,China ModelSHS-2438

ReportNo.:CISRR240516078 Page:1of20 TESTREPORT ReportNo.:CISRR240516078 ProjectNo.CISR240516078 FCCID2ANYD-SHS2438 Applicant:ShenzhenSanheshengElectronicCO.,LTD. Address:Room205,YuxingTechnologyParkBuilding,ThirdIndustrial Zone,NanchangCommunity,XixiangStreet,Bao'anDistrict, Shenzhen,China ManufacturerShenzhenSanheshengElectronicCO.,LTD. AddressRoom205,YuxingTechnologyParkBuilding,ThirdIndustrial Zone,NanchangCommunity,XixiangStreet,Bao'anDistrict, Shenzhen,China ProductName:ROTATINGSUSPENSIONLAMP TradeMark: Model/Typereference:SHS-2438 ListedModel(s):-- Standard:FCCPart15SubpartC Testdate:May16,2024~June11,2024 IssuedateJune12,2024 Testresult:Complied Preparedby:RoryHuangApprovedby:GenryLong Thetestresultsrelateonlytothetestedsamples. ThetestreportshouldnotbereproducedexceptinfullwithoutthewrittenapprovalofShenzhenBangce TestingTechnologyCo.,Ltd. ReportNo.:CISRR240516078 Page:2of20 Contents 1.REPORTVERSION.........................................................................................................................................3 2.SUMMARYOFTESTRESULT.......................................................................................................................4 3.SUMMARY.....................................................................................................................................................5 3.1.ProductDescription....................................................................................................................................5 3.2.RadioSpecificationDescription................................................................................................................5 3.3.ModificationofEUT.....................................................................................................................................6 3.4.TestingSite...................................................................................................................................................6 3.5.FieldStrengthCalculation..........................................................................................................................6 3.6.DISTURBANCECalculation........................................................................................................................6 4.TESTCONFIGURATION.............................................................................................................................7 4.1.Testmode.....................................................................................................................................................7 4.2.Supportunitusedintestconfigurationandsystem...............................................................................7 4.3.Testsampleinformation.............................................................................................................................7 4.4.Testingenvironmentalcondition...............................................................................................................8 4.5.Statementofthemeasurementuncertainty.............................................................................................8 4.6.EquipmentUsedduringtheTest...............................................................................................................9 5.TESTCONDITIONSANDRESULTS....................................................................................................10 5.1.ACConductedEmission...........................................................................................................................10 5.2.20dBBandwidth........................................................................................................................................13 5.3.RadiatedSpuriousEmission....................................................................................................................15 6.TESTSETUPPHOTOS............................................................................................................................20 7.EXTERNALANDINTERNALPHOTOS.................................................................................................20 7.1Externalphotos...........................................................................................................................................20 7.2Internalphotos............................................................................................................................................20 ReportNo.:CISRR240516078 Page:3of20 1.REPORTVERSION VersionNo.IssuedateDescription 00June12,2024Original ReportNo.:CISRR240516078 Page:4of20 2.SUMMARYOFTESTRESULT Report clause TestItemStandardRequirementResult 5.2ACConductedEmission15.207PASS 5.420dBBandwidth15.215PASS 5.13RadiatedSpuriousEmission15.209PASS Note: ‒Themeasurementuncertaintyisnotincludedinthetestresult. ReportNo.:CISRR240516078 Page:5of20 3.SUMMARY 3.1.ProductDescription Mainunitinformation: ProductName:ROTATINGSUSPENSIONLAMP TradeMark: ModelNo.:SHS-2438 ListedModel(s):-- Powersupply: Input:DC5V/3A,9V/2A,12V/1.5A Wirelesschargeoutput:5W/7.5W/10W/15W Hardwareversion:V1.0 Softwareversion:V1.0 3.2.RadioSpecificationDescription Technology:WirelessCharging Modulation:ContinuousWave Operationfrequency:110.1kHz-205kHz Antennatype:CoilAntenna Antennagain:0dBi ReportNo.:CISRR240516078 Page:6of20 3.3.ModificationofEUT NomodificationsaremadetotheEUTduringalltestitems. 3.4.TestingSite LaboratoryName ShenzhenBangceTestingTechnologyCo.,Ltd. LaboratoryLocation 101,building10,YunliIntelligentPark,Shutianpucommunity,MatianStreet, GuangmingDistrict,Shenzhen，Guangdong,China FCCregistrationnumber736346 3.5.FieldStrengthCalculation ThefieldstrengthiscalculatedbyaddingtheAntennaFactorandCableFactorandsubtractingthe AmplifierGainandDutyCycleCorrectionFactor(ifany)fromthemeasuredreading.Thebasicequation withasamplecalculationisasfollows: FS(dBuV/m)=RA(dBuV)+AF(dB/m)+CL(dB)–AG(dB) WhereFS=FieldStrengthCL=CableAttenuationFactor(CableLoss) RA=ReadingAmplitudeAG=Amplif…

Text truncated - open the document above for the full version.

FCCID:2ANYD-SHS2438 RadiatedEmission Below1GHz: FCCID:2ANYD-SHS2438 ACConductedEmission