2AO3N-TH87K7ERPIRF-310 Rev. B

Certification Application Attestation Statement Dedrone Holdings, LLC 45662 Terminal Dr, Suite 110 20166, Sterling Virginia, USA FRN: 0026107458 Subject: FCC ID: 2AO3N-TH87K7ERPI To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) Dedrone Holdings, LLC. certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Statement for 47 CFR section 2.911(d)(5)(ii) Dedrone Holdings, LLC certifies that, as of the date of the filing of this application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Date: City: Name: Function: Telephone number: Email address: Signature: 6/10/2026 Sterling Robin H. Jaeger Compliance Officer +1 703 2608051 [email protected]

U.S. Agent Designation for Service of Process (Applicant is Both Grantee and U.S. Agent) ATTENTION: FCC Certification - 47 CFR section 2.911(d)(7) Information This letter is to confirm that the Applicant will also serve as the U.S. Agent for Service of Process as required by 47 CFR 2.911(d)(7). The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The Applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information changes. Applicant & Agent Company name: FRN: Grantee Code: Contact person name: Agent name: Street Address: ZIP/City/State Telephone number: Email address: Signature Contact person: Date: Signature Agent: Date: Dedrone Holdings, LLC 0026107458 2AO3N Robin H. Jaeger Dedrone Holdings, LLC 45662 Terminal Dr., Suite 110 20166, Sterling, Virginia +1 703 2608051 [email protected] 06/10/2026 06/10/2026

FCC, Request for non-disclosure Date: 18-08-2025 RF_501, Issue 12 Page 1 of 2 Company Name: Dedrone Holdings, LLC. Address: 45662 Terminal Dr., Suite 110 City: Sterling/Virginia Country: USA To: Kiwa Nederland B.V., Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Request for confidentiality FCC ID: 2AO3N-TH87K7ERPI Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: To avoid premature release of sensitive information prior to marketing or release of the product to the public. Date: 7/14/2026 Name and signature of applicant: Imad Hjije Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should state in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! FCC, Request for non-disclosure Date: 18-08-2025 RF_501, Issue 12 Page 2 of 2 5) Request for extension or for release must be received by Kiwa NL B.V. at least 7 days before date of actual marketing or before expiration of the STC period FCC, Request for non-disclosure Date: 18-08-2025 RF_501, Issue 12 Page 3 of 2 Revision Record Sheet: Revision Section number Page number Date Remark(s) issued by 10 1 02-01-2023 History sheet added AG 11 1 & 2 23-06-2023 Corrected date and page# WJJ 12 all 18-08-2025 Kiwa logo change AG Issued/modified by : Axel Gase Function : Manager Quality Assurance Revision : 12 Date : 18-08-2025 Verified by : Willem Jan Jong Function : Team Lead Date : 18-08-2025 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : 18-08-2025

7layers GmbH Product Certification Department Borsigstraße 11 D 40880 Ratingen Declaration of Authorization To Whom It May Concern: Please be advised that we, Dedrone Holdings, LLC., authorize the following person from 7layers GmbH: ◦ Mr. Imad HJIJE to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents to these matters an in-country testing in the following countries: ◦ USA ◦ Canada 7layers GmbH has our permission to use our technical documents for the approvals for the following named device: Product description RF Scanner for the detection of commercial drones Brand name Dedrone RF-Sensor Type designation RF-310 Rev. B Unless future correspondence from us please extend your full cooperation to 7layers GmbH regarding matters to the above mentioned product to 6 months after the signatory date of this authorization. Contact person Robin H. Jaeger Position in the company Compliance Officer Date of signatory 06/10/2026 ____________________________ Signatory (Signature of the applicant)

TO: 7layers GmbH Date: 06/10/2026 Product Certification Department Borsigstraße 11 40880 Ratingen, Germany FCC ID: 2AO3N-TH87K7ERPI Subject: Declaration of compliance to the requirements of §15.121 We, Dedrone Holdings, LLC, declare that this scanning receiver is incapable of operating (tuning), or readily being altered by the users to operate, within the frequency bands allocated to the Cellular Radiotelephone Service in part 22 of this chapter (cellular telephone bands). This device will not be able to receive transmissions in cellular telephone bands by means of clipping the leads of, or installing a simple component such as a diode, resistor or jumper wire; replacing a plug-in semiconductor chip; or programming a semiconductor chip using special access codes or an external device, such as a personal computer. This device is also incapable of converting digital cellular communication transmissions to analog voice audio. This device is designed so that the tuning, control and filtering circuitry is inaccessible. Any attempts to modify the equipment to receive transmissions from Cellular Radiotelephone Service will render the receiver inoperable. This scanning receiver rejects any signals from Cellular Radiotelephone Service frequency bands that are 38 dB or lower based upon 12 dB SINAD measurement. We are aware that the modification of this device to receive transmissions from Cellular Radiotelephone Service frequency bands will be considered to constitute manufacture of such equipment. This includes any individual, individuals, entity or organization that modifies one or more scanners. Any modification to receive transmissions form Cellular Radiotelephone Service frequency bands voids the certification of the scanning receiver, regardless of the date of manufacture of the original unit. If you have any questions, please feel free to contact me. Thank you. Sincerely, Robin H. Jaeger

1 Dedrone RF-Sensor RF-310 Rev. B Label and Location Revision History Document Number Version And Revision type i) Comments Autor Label and Location RF-310 Rev. B 1.0 a Initial version R. Jaeger i) a) First Edition or minor modifications due to errors or improvements in the documentation. Replacing former version in brackets b) Modifications maintaining full and upward compatibility. Replacing former version in brackets c) Modifications limiting or excluding compatibility. Valid only in combination with former version in brackets 2

1 Dedrone RF-Sensor RF-310 Rev. B Antenna Specification Revision History Document Number Version And Revision type i) Comments Autor Antenna Specification RF-310 Rev. B 1.0 a Initial version R. Jaeger i) a) First Edition or minor modifications due to errors or improvements in the documentation. Replacing former version in brackets b) Modifications maintaining full and upward compatibility. Replacing former version in brackets c) Modifications limiting or excluding compatibility. Valid only in combination with former version in brackets 2 L-com, Inc. 50 High St., West Mill, 3 rd Floor, Suite #30 North Andover, MA 01845 www.L-com.com E-mail: [email protected] Phone: 1-800-343-1455 Fax: 1-978-689-9484 © L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com logo are registered marks. HyperLink Wireless 2.4/4.9/5.8 GHz 3 dBi Tri-Band Rubber Duck Antenna Model: HG2458RD-XXX Applications  2.4 GHz, 4.9 GHz and 5.8 GHz band applications  IEEE 802.11a/b/g/n and 802.11ac WiFi access points and routers  4.9 GHz homeland security, public safety services, fire, police and security applications  5.8 GHz wireless video and security systems Features  Three frequency ranges in one antenna  Flexible rubber duck design  Provides better performance than most stock access point antennas  Tilt and swivel design  Available with SMA Male, TNC Male, RP-SMA Plug and RP-TNC Plug connectors RP-SMA Plug Version Shown Description The HyperLink HG2458RD series is a high performance tri-band rubber-duck antenna designed to operate from 2.4 GHz to 2.5 GHz, 4.9 GHz to 5.3 GHz and 5.7 GHz to 5.8 GHz which eliminates the need to purchase different antennas for each frequency. The tri-band design of this antenna helps reduce interference and noise since it will reject out-of-band signals between the three bands of this antenna. This omnidirectional "rubber-duck" antenna provides broad coverage and 3 dBi gain. Measuring 7.79" long, this flexible antenna features a tilt-and-swivel connector which allows them to be used vertically, at a right angle, or any angle in-between. It is suitable as a replacement RF antenna for many wireless access points and routers that are equipped with similar type antennas. The HG2458RD is available with SMS Male, TNC Male, RP-RSP Plug or RP-TNC Plug connectors. Specifications Models Model Number Connector HG2458RD-TM TNC Male HG2458RD-SM SMA Male HG2458RD-RSP Reverse Polarity SMA Plug HG2458RD-RTP Reverse Polarity TNC Plug L-com, Inc. 50 High St., West Mill, 3 rd Floor, Suite #30 North Andover, MA 01845 www.L-com.com E-mail: [email protected] Phone: 1-800-343-1455 Fax: 1-978-689-9484 © L-com, Inc. All Rights Reserved. L-com Global Connectivity and the L-com logo are registered marks. Electrical Specifications Frequency Ranges 2400-2500 MHz 4900-5350 MHz 5725-5850 MHz Gain 3 dBi Horizontal Beam Width 360° Impedance 50 Ohm Max. Power 50W VSWR < 2:1 Mechanical Specifications Weight .96 oz. (27 g) Length 7.79" (198 mm) Max. Diameter 0.51" (13.1 mm) Finish Matte Black Operating Temperature -40° C to 60° C (-40° F to 140° F) Polarization Vertical Flame Rating UL 94HB RoHS Compliant Yes RF Antenna Patterns   -:&%     3URGXFW'DWDVKHHW .H\)HDWXUHV *+],60 0+] 0+] &RQQHFWRU0RXQW *URXQG3ODQH,QGHSHQGHQW +LQJHG&RQQHFWRU /RZ3URILOH 'LPHQVLRQVî‘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‘ $%6320 %ODFN WR WR 5R+6 *K]  a a a a a *K]  a a a a a ͲϮρ ͲϮϬ Ͳϭρ ͲϭϬ Ͳρ Ϭ ϮϮϬϬ ϮκϬϬ ϮςϬϬ ϮΘϬϬ ϯϬϬϬ ϯϮϬϬ ϯκϬϬ ϯςϬϬ ϯΘϬϬ κϬϬϬ κϮϬϬ κκϬϬ κςϬϬ κΘϬϬ ρϬϬϬ ρϮϬϬ ρκϬϬ ρςϬϬ ρΘϬϬ ςϬϬϬ ZĞƚƵƌŶ>ŽƐƐ;ĚͿ &ƌĞƋƵĞŶĐLJ;D,njͿ  ZZZMDQWHQQDHFRPZZZMDQWHQQDVXVDFRP 3DJH $QWHQQDSDUDPHWHUV   Ϭ ϭ Ϯ ϯ κ ρ ς ϳ Θ ε ϭϬ ϮϮϬϬ ϮκϬϬ ϮςϬϬ ϮΘϬϬ ϯϬϬϬ ϯϮϬϬ ϯκϬϬ ϯςϬϬ ϯΘϬϬ κϬϬϬ κϮϬϬ κκϬϬ κςϬϬ κΘϬϬ ρϬϬϬ ρϮϬϬ ρκϬϬ ρςϬϬ ρΘϬϬ ςϬϬϬ s^tZ &ƌĞƋƵĞŶĐLJ;D,njͿ  ZZZMDQWHQQDHFRPZZZMDQWHQQDVXVDFRP 3DJH Ϭ ϭϬ ϮϬ ϯϬ κϬ ρϬ ςϬ ϳϬ ΘϬ ϮϯϬϬ ϮρϬϬ ϮϳϬϬ ϮεϬϬ ϯϭϬϬ ϯϯϬϬ ϯρϬϬ ϯϳϬϬ ϯεϬϬ κϭϬϬ κϯϬϬ κρϬϬ κϳϬϬ κεϬϬ ρϭϬϬ ρϯϬϬ ρρϬϬ ρϳϬϬ ρεϬϬ ςϭϬϬ ĨĨŝĐŝĞŶĐLJ;йͿ &ƌĞƋƵĞŶĐLJ;D,njͿ Ϭ ϭ Ϯ ϯ κ ρ ϮϯϬϬ ϮρϬϬ ϮϳϬϬ ϮεϬϬ ϯϭϬϬ ϯϯϬϬ ϯρϬϬ ϯϳϬϬ ϯεϬϬ κϭϬϬ κϯϬϬ κρϬϬ κϳϬϬ κεϬϬ ρϭϬϬ ρϯϬϬ ρρϬϬ ρϳϬϬ ρεϬϬ ςϭϬϬ WĞĂŬ'ĂŝŶ;ĚŝͿ &ƌĞƋƵĞŶĐLJ;D,njͿ  ZZZMDQWHQQDHFRPZZZMDQWHQQDVXVDFRP 3DJH 5DGLDWLRQSDWWHUQUHIHUHQFH Ͳς Ͳρ Ͳκ Ͳϯ ͲϮ Ͳϭ Ϭ ϮϯϬϬ ϮρϬϬ ϮϳϬϬ ϮεϬϬ ϯϭϬϬ ϯϯϬϬ ϯρϬϬ ϯϳϬϬ ϯεϬϬ κϭϬϬ κϯϬϬ κρϬϬ κϳϬϬ κεϬϬ ρϭϬϬ ρϯϬϬ ρρϬϬ ρϳϬϬ ρεϬϬ ςϭϬϬ ǀĞƌĂŐĞ'ĂŝŶ;ĚͿ &ƌĞƋƵĞŶĐLJ;D,njͿ  ZZZMDQWHQQDHFRPZZZMDQWHQQDVXVDFRP 3DJH DQG0+]5DGLDWLRQSDWWHUQ  ZZZMDQWHQQDHFRPZZZMDQWHQQDVXVDFRP 3DJH $QWHQQDGUDZLQJV              ZZZMDQWHQQDHFRPZZZMDQWHQQDVXVDFRP 3DJH $QWHQQD,PDJHV  

Test Laboratory: 7layers GmbH Borsigstrasse 11 40880 Ratingen Germany Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the test laboratory. 7layers GmbH Geschäftsführer/ Borsigstraße 11 Managing Directors: Registergericht/registered: a Bureau Veritas 40880 Ratingen, Germany Martina Kerbl Düsseldorf HRB 75554 Group Company T +49 (0) 2102 749 0 Bernhard Retka USt-Id.-Nr./VAT-No. DE203159652 F +49 (0) 2102 749 350 Steuer-Nr./TAX-No. 147/5869/0385 www.7layers.com Commerzbank AG Account No. 303 016 000 Bank Code 300 400 00 IBAN DE81 3004 0000 0303 0160 00 Swift Code COBADEFF FCC Measurement/Technical Report on Dedrone RF-Sensor RF-310 Rev. B RF-310 Rev. B FCC ID: 2AON3-TH87K7ERPI IC: 23389-TH87K7ERPI Test Report Reference: MDE_DEDRONE_2506_FCC_01 TEST REPORT REFERENCE: MDE_DEDRONE_2506_FCC_01 Page 2 of 35 Table of Contents 1 Applied Standards and Test Summary 3 1.1 Applied Standards 3 1.2 FCC-IC Correlation Table 4 1.3 Measurement Summary 5 2 Revision History / Signatures 6 3 Administrative Data 7 3.1 Testing Laboratory 7 3.2 Project Data 7 3.3 Applicant Data 7 3.4 Manufacturer Data 8 4 Test object Data 9 4.1 General EUT Description 9 4.2 EUT Main components 9 4.3 Ancillary Equipment 10 4.4 Auxiliary Equipment 10 4.5 EUT Setups 10 4.6 Operating Modes / Test Channels 11 4.7 Product labelling 11 5 Test Results 12 5.1 Conducted Emissions at AC mains 12 5.2 Radiated Emissions 15 6 Test Equipment 24 6.1 Test Equipment Hardware 24 6.2 Test Equipment Software 27 7 Antenna Factors, Cable Loss and Sample Calculations 28 7.1 LISN R&S ESH3-Z5 (150 kHz – 30 MHz) 28 7.2 Antenna R&S HFH2-Z2 (9 kHz – 30 MHz) 29 7.3 Antenna R&S HL562 (30 MHz – 1 GHz) 30 7.4 Antenna R&S HF907 (1 GHz – 18 GHz) 31 7.5 Antenna EMCO 3160-09 (18 GHz – 26.5 GHz) 32 7.6 Antenna EMCO 3160-10 (26.5 GHz – 40 GHz) 33 8 Measurement Uncertainties 34 9 Photo Report 35 TEST REPORT REFERENCE: MDE_DEDRONE_2506_FCC_01 Page 3 of 35 1 APPLIED STANDARDS AND TEST SUMMARY 1.1 APPLIED STANDARDS Applicable FCC Rules Prepared in accordance with the requirements of FCC Rules and Regulations as listed in 47 CFR Ch.1 Parts 2 and 15 (10-1-24 Edition). The following subparts are applicable to the results in this test report. Part 2, Subpart J - Equipment Authorization Procedures, Certification Part 15, Subpart B – Unintentional Radiators § 15.107 Conducted limits § 15.109 Radiated emission limits; general requirements Applicable ISED Standards ICES-Gen, Issue 2 (February 2024) ICES-003, Issue 7 Note: ANSI C63.4–2014 is applied. TEST REPORT REFERENCE: MDE_DEDRONE_2506_FCC_01 Page 4 of 35 1.2 FCC-IC CORRELATION TABLE Correlation of measurement requirements for Information Technology Equipment (ITE) from FCC and ISED Canada Measurement FCC reference ISED reference Conducted Emissions (AC Power Line) §15.107 ICES-003 Issue 7: 3.2.1 Radiated Spurious Emissions §15.109 ICES-003 Issue 7: 3.2.2 Remarks: 1. FCC Part 15 subpart B, ICES 003 and CISPR 22 contain different definitions of Class A and Class B limits, i.e. which class is applicable to which kind of EUT. ICES 003 and CISPR 22 distinguish between the location where the EUT is intended to operate whilst FCC refers to the method of commercial distribution (distributive trades). 2. The correct assignment of the appropriate class to the concrete EUT is not scope of this test report! 3. A radio apparatus that is specifically subject to an ISED Radio Standard Specification (RSS) and which contains an ITE is not subject to ICES-003 provided the ITE is used only to enable operation of the radio apparatus and the ITE does not control additional functions or capabilities. 4. ISM (Industrial, Scientific or Medical) radio frequency generators, though they may contain ITE, are excluded from the definition of ITE and are not subject to ICES-003. They are instead subject to the Interference-Causing Equipment Standard ICES-001, which specifically addresses ISM radio frequency generators. TEST REPORT REFERENCE: MDE_DEDRONE_2506_FCC_01 Page 5 of 35 1.3 MEASUREMENT SUMMARY 47 CFR CHAPTER I FCC PART 15 Subpart B § 15.107 Class B Conducted Emissions at AC mains The measurement was performed according to ANSI C63.4 Final Result OP-Mode AC mains connection, Test setup Setup Date FCC IC via auxiliary equipment, computer peripheric S01_AA01 2026-04-21 Passed Passed 47 CFR CHAPTER I FCC PART 15 Subpart B § 15.109 Class B Radiated Emissions The measurement was performed according to ANSI C63.4 Final Result OP-Mode AC mains connection, Measurement range, Test setup Setup Date FCC IC via auxiliary equipment, 26 GHz - 40 GHz, computer peripheric S02_AA01 2026-03-31 Passed Passed via auxiliary equipment, 18 GHz - 26 GHz, computer peripheric S02_AA01 2026-03-31 Passed Passed via auxiliary equipment, 6 GHz - 18 GHz, computer peripheric S02_AA01 2026-03-30 Passed Passed via auxiliary equipment, 1 GHz - 6 GHz, computer peripheric S03_AA01 2026-04-28 Passed Passed via auxiliary equipment, 30 MHz - 1 GHz, computer peripheric S02_AA01 2026-03-30 Passed Passed N/A: Not applicable N/P: Not performed TEST REPORT REFERENCE: MDE_DEDRONE_2506_FCC_01 Page 7 of 35 3 ADMINISTRATIVE DATA 3.1 TESTING LABORATORY Company Name: 7layers GmbH Address: Borsigstr. 11 40880 Ratingen Germany The test facility is accredited by the following accreditation organisation: Laboratory accreditation no: DAkkS D-PL-12140-01-00 FCC Designation Number: DE0015 FCC Test Firm Registration: 929146 ISED CAB Identifier DE0007; ISED#: 3699A Responsible for accreditation scope: Dipl.-Ing. Marco Kullik Report Template Version: 2025-10-17 3.2 PROJECT DATA Responsible for testing and report: BSc. Jens Dörwald Employees who performed the tests: documented internally at 7Layers Date of Report: 2026-06- 05 Testing Period: 2026-03-30 to 2026-04-28 3.3 APPLICANT DATA Company Name: Dedrone Holdings, LLC Address: 45662 Terminal Dr., Suite 110 Sterling, VA 20166 USA Contact Perso…

Text truncated - open the document above for the full version.