2AOJA-PTSPPOCKETALK S Plus

Hello! Safety Precautions & FCC Statement POCKETALK https://rd.snxt.jp/PS945 Please check the web for the latest information. • Do not operate while walking or driving a car, motorbike, or bicycle. • Never disassemble, repair, or modify the product. • Do not apply excessive force. - Do not step on or place heavy objects on the product. - Do not drop or throw the product. • Keep the product away from liquids such as water (or drinking water, sweat, seawater, pet urine, etc.). • Do not allow conductive foreign objects (such as pieces of metal or pencil lead) to enter or come into contact with the USB port of the unit or the connector of the included USB cable. Also, do not allow dust to collect inside. • Do not damage the included USB cable. • If there is an abnormality such as odor, noise, smoke, or heat, turn off the product immediately and discontinue use. WARNING! Failure to follow these safety instructions could result in fire, electric shock, injury, or damage to the unit or other property. Read all safety instructions before use. Handling Safety precautions WARNING Before use Precautions are categorized as “Warning” or “Caution”. Follow the precautions during use. This indicates a description that, if not followed and not properly handled, may result in minor injury. This indicates a description that, if not followed and not properly handled, may result in product failure, material damage, or loss of data. This indicates a description that, if not followed and not properly handled, may result in death or severe injury. WARNING CAUTION NOTICE 2 Built-in battery • Do not use, charge, or store in humid, dusty, or extremely hot or cold places. • Do not touch the product for prolonged periods during use or charging. • Do not leave or store in places of high temperature such as near fire. • Do not prod with sharp objects (such as nails) or strike with hard objects (such as a hammer). • If the built-in battery leaks or emits a strange odor, discontinue use immediately and keep it away from fire. • If the built-in battery leaks, keep it away from clothing or your skin such as your face or hands. - Failure to do so may cause damage to your eyes and skin. • Do not attempt to replace the built-in battery yourself. Improper replacement or repair could damage the battery, cause overheating, or result in injury. • Do not dispose battery in normal trash. The battery must be recycled or disposed of separately from household waste. Do not incinerate battery. • Make sure that the battery does not get exposed to very cold conditions beyond its operating range, either during use, storage or transporting. • Avoid areas with low atmospheric pressure such as high altitudes. NOTICE • Do not press the touchscreen display with excessive force or operate it with pointed objects. Electromagnetic interference WARNING • Use the product properly in aircraft according to the instructions of the airline. • In hospitals and places with electronic devices that require high-precision control and weak signals, use the product properly according to the instructions of the administrator. WARNING CAUTION Safety precautions 3 • If you wear electronic medical devices, or use electronic medical devices other than implantable medical devices for home treatment, confirm the effects of electromagnetic waves with the electronic medical device manufacturer or distributor before use. WARNING When charging • Use the included USB cable and charge using the specified procedure. - Charging with an unspecied procedure may cause battery leakage, heating, or rupture. Also, when charging overseas, use a USB charger that is compatible overseas. • Using damaged cables or chargers, or charging when moisture is present, can cause fire, electric shock, injury, or damage to the unit or other property. NOTICE When cleaning • Do not use benzene, thinner, or alcohol. - Doing so may deteriorate the exterior or dissolve the parts. If the product is dirty, wipe it with a soft, dry cloth (such as a cloth for glasses). When disposing • Do not throw away the product with normal trash. - This product uses lithium-ion battery, and throwing it away with normal trash may cause a re. Dispose products that are no longer used according to the ordinances or regulations related to waste disposal of your local authority. WARNING Safety precautions 4 FCC Statement for the USA This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Please use this product …

Text truncated - open the document above for the full version.

2020/9/18POCKETALK S Plus User Manual https://forge.itdc-docker.hamamatsu.crestec.local/3926/dest/index.html#!/print?modal1/43 POCKETALK S Plus VOICE TRANSLATOR User Manual Version: 1.0 Date: September 2020 Copyright (C) SOURCENEXT CORPORATION All Rights Reserved. 2020/9/18POCKETALK S Plus User Manual https://forge.itdc-docker.hamamatsu.crestec.local/3926/dest/index.html#!/print?modal2/43 1 2 3 4 Initial Setup Initial setup is required when you turn on the unit for the first time. (The images are from POCKETALK S. Some appearances will vary.) Turn the Power On Hold down the power button placed on the right side of the device. Select display language Select the language the device settings and explanations will be displayed in. Tap [OK]. NOTE This is the language your settings and device explanations will be displayed in. Agree to the EULA Please read the end-user license agreement (EULA). To agree, check and tap [Agree]. Verify Your Age 2020/9/18POCKETALK S Plus User Manual https://forge.itdc-docker.hamamatsu.crestec.local/3926/dest/index.html#!/print?modal3/43 5 6 7 8 It will display an age verification dialog. Tap [Yes] or [No] based on the message on the screen. Agree to the Privacy Policy Please read the Privacy Policy. To agree to the terms, check and tap [Agree]. Connect the unit to the mobile network This will activate your cellular data plan by connecting it to the mobile network. Select [Next] when connected. Set Up the Wi-Fi (Optional) If you don't want to set it up now Tap [Skip]. If you want to set it up now Switch [Wi-Fi] to [ON], tap the network name you want to connect to and enter the password. And you’re done! When you are finished with the initial setup, refer to the operating section of this guide and start translating! 2020/9/18POCKETALK S Plus User Manual https://forge.itdc-docker.hamamatsu.crestec.local/3926/dest/index.html#!/print?modal4/43 NOTE To translate, the device must be connected to the internet either through a mobile network or Wi-Fi. We recommend updating to the latest software when you first set up. Getting Started What's included UnitUSB Wall ChargerUSB charging cable (Unit connector: USB Type-C Charger connector: USB Type-A) Startup Guide Safety Precautions & FCC Statement Parts Description 2020/9/18POCKETALK S Plus User Manual https://forge.itdc-docker.hamamatsu.crestec.local/3926/dest/index.html#!/print?modal5/43 1 2 3 4 5 6 7 8 Speaker Microphone SIM card slot Touch screen display Talk button Power button Volume button Camera 2020/9/18POCKETALK S Plus User Manual https://forge.itdc-docker.hamamatsu.crestec.local/3926/dest/index.html#!/print?modal6/43 9 10 11 12 Flash Strap holder loop USB charging port Microphone Charging Charge using the included USB wall charger and USB cable. Turning the unit on or off If you press and hold the power button on the side of the unit, the unit and display will turn on. 2020/9/18POCKETALK S Plus User Manual https://forge.itdc-docker.hamamatsu.crestec.local/3926/dest/index.html#!/print?modal7/43 To turn off the unit, press and hold the power button again, and tap [Power off]. To restart the unit, tap [Restart]. Basic Operations The unit features a touch display. This User Manual uses the following terms to describe operations. Tap Touching the screen with your fingertip is called a “tap”, which is a commonly used operation. Touching the screen and keeping your finger in place is called “tap and hold”. Scroll Swiping repeatedly to view other parts in the screen such as lists is called “scroll”. 2020/9/18POCKETALK S Plus User Manual https://forge.itdc-docker.hamamatsu.crestec.local/3926/dest/index.html#!/print?modal8/43 Swipe Dragging your fingertip on the screen in one direction is called a “swipe”. 2020/9/18POCKETALK S Plus User Manual https://forge.itdc-docker.hamamatsu.crestec.local/3926/dest/index.html#!/print?modal9/43 1 2 Using Pocketalk Translating You can translate simply by pressing the button and speaking to the unit. While pressing and holding , speak to the unit when you hear a beep sound (release your finger from the button when you are finished speaking). Check the translation result. Your spoken words and the translation result will be displayed on the screen as text, and the translation result will be played back as speech. Some languages are only displayed as text, without speech playback. Adjust the volume as needed. Adjusting the volume Changing the translation direction The translation languages are displayed as a pair at the top and bottom of the screen. The language with the blue background is translated to the language with the black background (in the direction 2020/9/18POCKETALK S Plus User Manual https://forge.itdc-docker.hamamatsu.crestec.local/3926/dest/index.html#!/print?modal10/43 of the arrow). You can change the direction of translation by tapping . Changing the translation language If you tap a language you want to change, a list of languages is displayed. 2020/9/18POCKETALK S Plus User Manual https://forge.itdc-docker.hamamatsu.crestec.local/3926/dest/index.html#!/print?modal11/43 Scroll through the list of languages, select the language you want to use, and tap < at the upper left. You can easily search for the language you want with the following methods. Display all available languages. Select from languages you have used previously. Display a list of countries. Select from the main languages used in a country. If this icon is displayed on the screen, press on the unit to search by voice. Reviewing the translation history To access previous translations, swipe down from the top of the Home screen. 2020/9/18POCKETALK S Plus User Manual https://forge.itdc-docker.hamamatsu.crestec.local/3926/dest/index.html#!/print?modal12/43 You can scroll up on this screen to view past translations. POCKETALK stores up to 10,000 translations. Using the retranslation feature You can retranslate translated text into another language. Tap and hold the callout of the translation you want to retranslate.…

Text truncated - open the document above for the full version.

External Photo SOURCENEXT CORPORATION 2AOJA-PTSP Photo 1 Photo 2 External Photo SOURCENEXT CORPORATION 2AOJA-PTSP Photo 3 Photo 4 Photo 5 Photo 6

First step Second step Third step Regulatory

PTS PLUS Wifi&WWAN Module PCBA ‐ Wifi/WWAN Module with shield ‐ Front PCBA ‐ Wifi/WWAN Module with shield ‐ Front PCBA ‐ Wifi Module without shield ‐ Front Wifi /BT/GPS module 3 in1 PCBA ‐ WWAN Module without shield ‐ Front WWAN (4G/3G) module PCBA ‐ back PCBA ‐ back Wifi Module ‐ Front Wifi Module ‐ Back WWAN Module ‐ Front WWAN Module ‐ Back PCBA Position 1 PCBA Position 2 PCBA Position 3 Antenna Position inside Part of Antenna

Test report No. : 13478071H-R2 Page : 1 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 SAR TEST REPORT Test Report No. : 13478071H-R2 Applicant : SOURCENEXT CORPORATION Type of EUT : POCKETALK S Plus Model Number of EUT : PTSP FCC ID : 2AOJA-PTSP Test regulation : FCC47CFR 2.1093 Test Result : Complied (Refer to SECTION 4) Reported SAR (1 g) Value : The highest reported SAR (1 g) Standalone (Body): 0.89 W/kg Simultaneous Transmission (Body): 1.52 W/kg 1. This test report shall not be reproduced in full or partial, without the written approval of UL Japan, Inc. 2. The results in this report appl y only to the sample tested. 3. This sample tested is in compliance with the limits of the above re gulation. 4. The test results in this report are traceable to the national or international standards. 5. This test report covers SAR technical requirements. It does not cover administrative issues such as Manual or non-SAR test related Requirements. (if applicable) 6. The all test items in this test report are conducted by UL Japan, Inc. Ise EMC Lab. 7. This test report must not be used by the customer to claim product certification, approval, or endorsemen t by NVLAP, NIST, or any agency of the U.S. Government. 8. The information provided from the customer for this report is identified in SECTION 1. 9. This report is a revised version of 13478071H-R1. 13478071H-R1 is replaced with this report. Date of test: April 24 to September 2, 2020 Representative test engineer: Yutaka Yoshida Engineer Consumer Technology Division Approved by : Takayuki Shimada Leader Consumer Technology Division This report contains data that are not covered by the NVLAP accreditation. There is no testing item of "Non-accreditation". This laboratory is accredited by the NVLAP LAB CODE 200572-0, U.S.A. The tests reported herein have been performed in accordance with its terms of accreditation. *As for the range of Accreditation in NVLAP, you may refer to the WEB address, http://japan.ul.com/resources/emc_accredited/ Report Cover Page - 13-EM-F0429 Issue # 17.0 Test report No. : 13478071H-R2 Page : 2 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 REVISION HISTORY Original Test Report No.: 13478071H Revision Test report No. Date Page revised Contents - (Original) 13478071H September 24, 2020 - - 1 13478071H-R1 October 20, 2020 P1 Corrected simultaneous TX SAR value from 1.51 W/k g to 1.52 W/kg 1 13478071H-R1 October 20, 2020 P6 - 7 Deleted the antenna gain information 1 13478071H-R1 October 20, 2020 P13 Added Duty ratio to table of Software settin g 1 13478071H-R1 October 20, 2020 P15 - 16 Added data of Duty Confirmation for WLAN 2 13478071H-R2 October 27, 2020 P11, 60, 64, 66, 67, 70, 71 Corrected data for Bluetooth and BTLE (Bluetooth Low Ener gy) Test report No. : 13478071H-R2 Page : 3 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Reference: Abbreviations (Including words undescribed in this report) A2LA The American Association for Laboratory Accreditation MCS Modulation and Coding Scheme AC Alternating Current MRA Mutual Recognition Arrangement AFH Adaptive Frequency Hopping N/A Not Applicable AM Amplitude Modulation NIST National Institute of Standards and Technology Amp, AMP Amplifier NS No signal detect. ANSI American National Standards Institute NSA Normalized Site Attenuation Ant, ANT Antenna NVLAP National Voluntary Laboratory Accreditation Program AP Access Point OBW Occupied Band Width ASK Amplitude Shift Keying OFDM Orthogonal Frequency Division Multiplexing Atten., ATT Attenuator P/M Power meter AV Average PCB Printed Circuit Board BPSK Binary Phase-Shift Keying PER Packet Error Rate BR Bluetooth Basic Rate PHY Physical Layer BT Bluetooth PK Peak BT LE Bluetooth Low Energy PN Pseudo random Noise BW BandWidth PRBS Pseudo-Random Bit Sequence Cal Int Calibration Interval PSD Power Spectral Density CCK Complementary Code Keying QAM Quadrature Amplitude Modulation Ch., CH Channel QP Quasi-Peak CISPR Comite International Special des Perturbations Radioelectriques QPSK Quadri-Phase Shift Keying CW Continuous Wave RBW Resolution Band Width DBPSK Differential BPSK RDS Radio Data System DC Direct Current RE Radio Equipment D-factor Distance factor RF Radio Frequency DFS Dynamic Frequency Selection RMS Root Mean Square DQPSK Differential QPSK RSS Radio Standards Specifications DSSS Direct Sequence Spread Spectrum Rx Receiving EDR Enhanced Data Rate SA, S/A Spectrum Analyzer EIRP, e.i.r.p. Equivalent Isotropically Radiated Power SG Signal Generator EMC ElectroMagnetic Compatibility SVSWR Site-Voltage Standing Wave Ratio EMI ElectroMagnetic Interference TR Test Receiver EN European Norm Tx Transmitting ERP, e.r.p. Effective Radiated Power VBW Video BandWidth EU European Union Vert. Vertical EUT Equipment Under Test WLAN Wireless LAN Fac. Factor FCC Federal Communications Commission FHSS Frequency Hopping Spread Spectrum FM Frequency Modulation Freq. Frequency FSK Frequency Shift Keying GFSK Gaussian Frequency-Shift Keying GNSS Global Navigation Satellite System GPS Global Positioning System Hori. Horizontal ICES Interference-Causing Equipment Standard IEC International Electrotechnical Commission IEEE Institute of Electrical and Electronics Engineers IF Intermediate Frequency ILAC International Laboratory Accreditation Conference ISED Innovation, Science and Economic Development Canada ISO International Organization for Standardization JAB Japan Accreditation Board LAN Local Area Network LIMS Laboratory Information Management System Test report No. : 13478071H-R2 Page : 4 of 216 Issued date : Octobe…

Text truncated - open the document above for the full version.

Test report No. : 13478071H-R2 Page : 142 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 143 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 144 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 System Check Dipole SAR Calibration Certificate -Dipole 2600MHz(D2600V2,S/N: 1030) Test report No. : 13478071H-R2 Page : 145 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 146 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 147 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 148 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 149 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 150 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 151 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 152 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 D2600V2 Calibration for Impedance and Return-loss 1. Test environment Date March 31, 2020 Ambient Temperature 24.0 deg.C Relative humidity 47%RH 2. Equipment used Control No. Instrument Manufacturer Model No Serial No Test Item Calibration Date * Interval(month) EST-63 Network Analyzer Keysight Technologies Inc E5071C MY46523746 SAR 2019/04/13 * 12 EST-64 Calibration Kit Keysight Technologies Inc 85032F MY53200995 SAR 2019/04/16 * 12 MPF-03 2mm Oval Flat Phantom Schmid&Partner Engineering AG QDOVA001BB 1203 SAR 2019/05/14 * 12 MPSAM-03 SAM Phantom Schmid&Partner Engineering AG QD000P40CD 1764 SAR 2019/05/13 * 12 MOS-30 Thermo-Hygrometer CUSTOM CTH-201 3001 SAR 2019/07/03 * 12 MHBBL600- 10000 Head Simulating Liquid Schmid & Partner Engineering AG HBBL600- 10000V6 SL AAH U16 BC - MMBBL600- 6000 Body Simulating Liquid Schmid & Partner Engineering AG MBBL600-6000 SL AAM U16 BC - 3. Test Result Imp eadance,T ransformed t o feed p ointcal day Head (real p art) [Ω] Head (img p art) [jΩ] Deviation (real p art) [Ω] Deviation (img p art) [jΩ] ToleranceResult Calibration (SPEAG)2019/3/1449.00-5.40 ---- Calibration(ULJ)2020/3/3151.27-6.792.27-1.39 +/-5Ω+/-5jΩComp lied Return losscal day Head [dB] Deviation [dB] Tolerance [+/-dB] Result Calibration (SPEAG)2019/3/14-25.10 --- Calibration(ULJ)2020/3/31-23.181.925.02 Comp lied Imp eadance,T ransformed t o feed p ointcal day Body (real p art) [Ω] Body (img p art) [jΩ] Deviation (real p art) [Ω] Deviation (img p art) [jΩ] ToleranceResult Calibration (SPEAG)2019/3/1445.00-4.00 ---- Calibration(ULJ)2020/3/3148.975-5.893.98-1.89 +/-5Ω+/-5jΩComp lied Return losscal day Body [dB] Deviation [dB] Tolerance [+/-dB] Result Calibration (SPEAG)2019/3/14-23.40 --- Calibration(ULJ)2020/3/31-24.251-0.854.68 Comp lied Tolerance: According to the KDB865664 D1 Test report No. : 13478071H-R2 Page : 153 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Measurement Plots <Head Liquid> <Body Liquid> Test report No. : 13478071H-R2 Page : 154 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 System Check Dipole SAR Calibration Certificate -DipoleD5GHz (D5GHzV2 S/N: 1020) Test report No. : 13478071H-R2 Page : 155 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 156 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 157 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 158 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test …

Text truncated - open the document above for the full version.

Test report No. : 13478071H-R2 Page : 168 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 169 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 170 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 171 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 172 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 173 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 174 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 175 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124

Test report No. : 13478071H-R2 Page : 176 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 177 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 178 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 179 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 180 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 181 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 182 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 183 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 184 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 185 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 186 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 187 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Dosimetric E-Field Probe Calibration Certificate (EX3DV4, S/N: 3825) Test report No. : 13478071H-R2 Page : 188 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 189 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8999 Facsimile: +81 596 24 8124 Test report No. : 13478071H-R2 Page : 190 of 216 Issued date : October 27, 2020 FCC ID : 2AOJA-PTSP UL Japan, Inc. Ise EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-k…

Text truncated - open the document above for the full version.