2AOKB-A1616Anker 321 MagGO Battery(PowerCore 5K)

Product Number: A1616 51005003835 V01 For FAQs and more information, please visit: anker.com/support @Anker Deutschland @Anker Japan @Anker @AnkerOcial @Anker_JP @anker_ocial @anker_jp English 01 Deutsch 06 Español 09 Français 12 Italiano 17 Nederlands 20 Język polski 23 Português 26 Pусский 29 Svenska 32 Türkçe 35 日本語 38 한국어 40 简体中文 42 繁體中文 44 ةيِبَرَعل 46 EN 0201 EN Important Safety Instructions When using this product, basic precautions should always be followed, including the following: 1) Store this product in a cool and dry place. 2) Do not store this product in a hot or humid environment. 3) Using a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or personal injury. 4) Operating temperature should be between 32 to 104°F / 0 to 40°C. 5) Do not disassemble this product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or personal injury. 6) If this product is not used for an extended period, you should charge and discharge it once every three months. 7) When charging a device, this product may feel warm. This is a normal operating condition and should not be a cause for concern. 8) Under normal operating conditions, the battery performance will decline over several years. 9) Do not expose the product to heat or fire. 10) Do not clean this product with harmful chemicals or detergents. 11) Misuse, dropping, or excessive force may cause product damage. 12) When disposing of secondary cells or batteries, keep those of different electrochemical systems separate. 13) Beware that a discharged battery may cause fire or smoke. 14) CAUTION: There is a risk of explosion if the battery is replaced by an incorrect type. 15) WARNING: The batteries (battery pack or installed batteries) shall not be exposed to excessive heat, such as from the sun or fire. 16) A battery subjected to extremely low air pressure may result in an explosion or leakage of flammable liquid or gas. EN LED Indicator Wireless Charging Indicator Flashing blue Wireless charging activated Solid blueCharging wirelessly Flashing blue quickly Metal or abnormal objects detected OffWireless charging off Battery Level Indicator Flashing whiteBattery input/output Solid white Showing the current battery level OffNo battery power Note: When Anker 321 MagGo Battery (PowerCore 5K) exceeds the temperature limit, the battery level indicator will turn off. Let it cool down before using it again. • • This wireless charger is not compatible with non-Magsafe phone cases, such as Otterbox Defender cases. • • Do not use an adapter with an output of 5V/1A (5W) or less. • • Wireless chargers make charging more convenient than wired chargers but are confined by current wireless technology. Hence, the charging speed is slower than that of wired chargers. • • High temperatures will reduce charging speed and restrict power. It is recommended that you charge your device in environments with temperatures below 25°C / 77°F. • • The protective phone case and the position of your device on the wireless charger will affect the charging speed. The further it is placed from the center of the wireless charger, the slower the charging speed will be. EN 0403 EN FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment to an outlet on a circuit different from the connected receiver. (4) Consult a dealer or an experienced radio / TV technician for help. FCC RF exposure statement: This equipment complies with FCC Radiation exposure limits set forth for an uncontrolled environment. This equipment can be used in portable exposure condition without restriction. Declaration of Conformity Hereby, Anker Innovations Limited declares that this product is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com GB Declaration of Conformity Hereby, Anker Innovations Limited declares that this product is in compliance with Radio Equipment Regulations 2017 & The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the GB declaration of conformity is available at the following internet address: https://www.anker.com Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong The following importers are the responsible parties (contracts for EU and UK matters): Anker Technology (UK) Ltd GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Mu…

Text truncated - open the document above for the full version.

AnkerInnovationsLimited * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. U.S. Agent Designation for Service of Process - Certification Attestation Letter 2/20/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2AOKB-A1616 Per section 2.911(d)(7) of the FCC rules, Anker Innovations Limited (“theapplicant”) certifies that the equipment for which authorization is sought is designated to thefollowing U.S. agent* for service of process: Company Name: Fantasia Trading LLC FCC Registration Number (FRN): 0033423005 Physical U.S. Company Address: 5350 Ontario Mills Pkwy, STE 100, Ontario,CA 91764, United States Contact Person: Louis Qi Agent Email Address: [email protected] The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed:Agent Signed (if different from Applicant): Signed:Signed: Printed name: louis QiPrinted name: louis Qi Title: General ManagerTitle: Compliance Manager Company Name: Anker Innovations LimitedCompany Name: Fantasia Trading LLC Date: 2/20/2023Date: 2/20/2023

Anker Innovations Limited Covered Equipment Certification Attestation Letter 2/20/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2AOKB-A1616 Anker Innovations Limited (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Signed: Printed name: louis Qi Title: General Manager Company Name: Anker Innovations Limited Date: 2/20/2023

Anker Innovations Limited Covered Equipment Certification Attestation Letter 2/20/2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2AOKB-A1616 Anker Innovations Limited (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List , the applicant should include an explanation on why the equipment is not “covered” equipment. Signed: Printed name: louis Qi Title: General Manager Company Name: Anker Innovations Limited Date: 2/20/2023

DATE : 2/24/2023 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint EST Technology Co., Ltd. Address:Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong <Signature> Name： louis Qi Title：General Manager Applicant Company：Anker Innovations Limited

DATE : 2/24/2023 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AOKB-A1616 Product Name: Anker 321 MagGO Battery(PowerCore 5K) Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:  Schematics  Block diagram  Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. <Signature> Name：louis Qi Title： General Manager Company：Anker Innovations Limited

DATE : 2/24/2023 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AOKB-A1616 Product Name: Anker 321 MagGO Battery(PowerCore 5K) Request for Short-Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission rules, and in accordance with the FCC Public notice dated June 15, 2004 (DA 04-1705), we hereby request short-term confidentiality for the following items prior to marketing the device.:  Test Setup Photos  External Photos  Internal Photos  User Manual The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. <Signature> Name：louis Qi Title： General Manager Company：Anker Innovations Limited

External Photos M/N: A1616 External Photos M/N: A1616 External Photos M/N: A1616 External Photos M/N: A1616 External Photos M/N: A1616 External Photos M/N: A1616

9.0mm 9.0 mm

Internal Photos M/N: A1616 Coil Antenna Internal Photos M/N: A1616

FCC ID: 2AOKB-A1616 EST Technology Co., Ltd Report No. ESTE-R2302127 Page 1 of 10 RF EXPOSURE REPORT FOR CERTIFICATION On Behalf of Anker Innovations Limited Anker 321 MagGO Battery(PowerCore 5K) Model Number: A1616 FCC ID: 2AOKB-A1616 Applicant: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Prepared By: EST Technology Co., Ltd. Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China Tel: 86-769-83081888-808 Report Number: ESTE-R2302127 Date of Test: Jan. 16~Feb. 14, 2023 Date of Report: Feb. 16, 2023 FCC ID: 2AOKB-A1616 EST Technology Co., Ltd Report No. ESTE-R2302127 Page 2 of 10 TABLE OF CONTENTS Description Page TEST REPORT VERIFICATION......................................................................................................................... 3 1. SUMMARY OF TEST ......................................................................................................................... 4 1.1. Summary of test result ...................................................................................................................... 4 1.2. Test Mode ......................................................................................................................................... 4 1.3. Test Equipment List ......................................................................................................................... 4 2. MAXIMUM PERMISSIBLE EXPOSURE ............................................................................................... 5 2.1. Limit ................................................................................................................................................. 5 2.2. Test Setup A ..................................................................................................................................... 5 2.3. Test Setup B ..................................................................................................................................... 6 2.4. Test Procedure .................................................................................................................................. 6 2.5. Equipment Approval Considerations ............................................................................................... 7 2.6. Test Result for Test setup A: ............................................................................................................ 8 2.7. Test Result for Test setup B: ............................................................................................................ 9 3. TEST SETUP PHOTO ................................................................................................................. 10 FCC ID: 2AOKB-A1616 EST Technology Co., Ltd Report No. ESTE-R2302127 Page 4 of 10 1. SUMMARY OF TEST 1.1. Summary of test result No. Description of Test Item FCC Standard Section Results 1 Maximum Permissible Exposure Part 1.1307(b)&1.1310 PASS 1.2. Test Mode 1.3. Test Equipment List Equipment Manufacturer Model No. Serial No. Last Cal. Next Cal. Electric and Magnetic Field Probe-Analyzer Narda S.T.S./PMM EHP-200A EST-E106 June 13,22 1 Year Simulated load / / EST-306 N/A N/A Simulated load / / EST-307 N/A N/A Test Software Narda EHP200-TS Rel 1.92 N/A N/A Test Item Test Mode Maximum Permissible Exposure Wireless Charging with Empty Load Wireless Charging with Half Load Wireless Charging with Full Load Note： The worst Full Load status is recorded in the report FCC ID: 2AOKB-A1616 EST Technology Co., Ltd Report No. ESTE-R2302127 Page 5 of 10 2. MAXIMUM PERMISSIBLE EXPOSURE 2.1. Limit Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm2) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 *100 6 3.0-30 1842/f 4.89/f *900/f 2 6 30-300 61.4 0.163 1.0 6 300-1,500 f/300 6 1,500-100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *100 30 1.34-30 824/f 2.19/f *180/f 2 30 30-300 27.5 0.073 0.2 30 300-1,500 f/1500 30 1,500-100,000 1.0 30 Note: 1. f = frequency in MHz * = Plane-wave equivalent power density. 2. For devices designed for typical desktop applications, such a wireless charging pads, RF exposure evaluation should be conducted assuming a user separation distance of 15 cm. E and H field strength measurements or numerical modeling may be used to demonstrate compliance. Measurements should be made from all sides and the top of the primary/client pair, with the 15 cm measured from the center of the probe(s) to the edge of the device. Emissions between 100 kHz to 300 kHz should be assessed versus the limits at 300 kHz in Table 1 of Section 1.1310: 614 V/m and 1.63 A/m. A KDB inquiry is required to determine the applicable exposure limits below 100 kHz. 2.2. Test Setup A FCC ID: 2AOKB-A1616 EST Technology Co., Ltd Report No. ESTE-R2302127 Page 6 of 10 2.3. Test Setup B 2.4. Test Procedure a. The test was performed on 360 degree turn table in anechoic chamber. b. The probe was placed at 15 cm surrounding the device and 20 cm above the top of the charger and the geometric centre of the probe, for test setup A. c. Measure magnetic and electrical field strength at a distance 10cm to 1cm at 1cm iteration, Which is between the edge of the charger and the edge of of probe, for test setup B. d. The highest emission level was recorded and compared with limit as soon as measurement of each point; A, B, C, D, E were completed. FCC ID: 2AOKB-A1616 EST Technology Co., Ltd Report No. ESTE-R2302127 Page 7 of 10 2.5. Equipment Approval Considerations Inductive wireless power transfer applications with supporting field strength results and meeting all of the following requirements are not required to submit a KDB inquiry for devices approved using SDoC or a PAG for equipment approved using certification to address RF exposure compliance. …

Text truncated - open the document above for the full version.

FCC ID: 2AOKB-A1616 EST Technology Co., Ltd Report No. ESTE-R2302126 Page 1 of 23 FCC PART 15C TEST REPORT FOR CERTIFICATION On Behalf of Anker Innovations Limited Anker 321 MagGO Battery(PowerCore 5K) Model Number: A1616 FCC ID: 2AOKB-A1616 Applicant: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Prepared By: EST Technology Co., Ltd. Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China Tel: 86-769-83081888-808 Report Number: ESTE-R2302126 Date of Test: Jan. 16~Feb. 14, 2023 Date of Report: Feb. 16, 2023 FCC ID: 2AOKB-A1616 EST Technology Co., Ltd Report No. ESTE-R2302126 Page 2 of 23 TABLE OF CONTENTS Description Page TEST REPORT VERIFICATION......................................................................................................................... 3 1. GENERAL INFORMATION ................................................................................................................. 4 1.1. Description of Device (EUT) ........................................................................................................... 4 2. SUMMARY OF TEST ......................................................................................................................... 5 2.1. Summary of test result ...................................................................................................................... 5 2.2. Test Facilities ................................................................................................................................... 6 2.3. Measurement uncertainty ................................................................................................................. 7 2.4. Assistant equipment used for test ..................................................................................................... 7 2.5. Block Diagram ................................................................................................................................. 7 2.6. Test Mode ......................................................................................................................................... 7 2.7. Test Equipment List ......................................................................................................................... 8 3. RADIATED EMISSION ...................................................................................................................... 9 3.1. Limit ................................................................................................................................................. 9 3.2. Test Setup ....................................................................................................................................... 10 3.3. Spectrum Analyzer Setting ............................................................................................................. 11 3.4. Test Procedure ................................................................................................................................ 11 3.5. Test Result ...................................................................................................................................... 12 4. AC POWER LINE CONDUCTED EMISSIONS .................................................................................... 18 4.1. Limit ............................................................................................................................................... 18 4.2. Test Setup ....................................................................................................................................... 18 4.3. Spectrum Analyzer Setting ............................................................................................................. 18 4.4. Test Procedure ................................................................................................................................ 18 4.5. Test Result ...................................................................................................................................... 19 5. ANTENNA REQUIREMENTS ............................................................................................................ 21 5.1. Limit ............................................................................................................................................... 21 5.2. Test Result ...................................................................................................................................... 21 6. TEST SETUP PHOTO ................................................................................................................. 22 7. EUT PHOTO ................................................................................................................................ 23 FCC ID: 2AOKB-A1616 EST Technology Co., Ltd Report No. ESTE-R2302126 Page 4 of 23 1. GENERAL INFORMATION 1.1. Description of Device (EUT) Note: For a more detailed features description, please refer to the manufacturer’s specifications or the user's manual. Product Name : Anker 321 MagGO Battery(PowerCore 5K) Model Number : A1616 Operation Frequency : 111-205KHz Max Wireless Charge Power : 7.5W Max Field Strength of Fundamental : 69.40dBuV/m Modulation Type : ASK Antenna Type : Induction coil Sample Type : Prototype production FCC ID: 2AOKB-A1616 EST Technology Co., Ltd Report No. ESTE-R2302126 Page 5 of 23 2. SUMMARY OF TEST 2.1. Summary of test result No. Description of Test Item FCC Standard Section Results 1 Radiated Emission 15.205 15.209 PASS 2 AC Power Line Conducted Emissions 15.207 PASS 3 Antenna Requirement 15.203 PASS Note:“N/A” denotes test is not applicable in this test report. FCC ID: 2AOKB-A1616 EST Technology Co., Ltd Report No. ESTE-R2302126 Page 6 of 23 2.2. Test Facilities EMC Lab : Certificated by CNAS, CHINA Registration No.: L5288 This Certificate is valid until: November 12, 2023 Certificated by FCC, USA D…

Text truncated - open the document above for the full version.

EST Technology Co., Ltd. Report. No. ESTE-R2302200 Page 1 of 9 1. TEST SETUP PHOTO Conducted Test EST Technology Co., Ltd. Report. No. ESTE-R2302200 Page 2 of 9 Radiated Test (Below 30MHz) EST Technology Co., Ltd. Report. No. ESTE-R2302200 Page 3 of 9 Radiated Test (Above 30MHz) EST Technology Co., Ltd. Report. No. ESTE-R2302200 Page 4 of 9 RF EXPOSURE Setup A Position A Position B EST Technology Co., Ltd. Report. No. ESTE-R2302200 Page 5 of 9 Position C Position D EST Technology Co., Ltd. Report. No. ESTE-R2302200 Page 6 of 9 Position E EST Technology Co., Ltd. Report. No. ESTE-R2302200 Page 7 of 9 Setup B Position A Position B EST Technology Co., Ltd. Report. No. ESTE-R2302200 Page 8 of 9 Position C Position D EST Technology Co., Ltd. Report. No. ESTE-R2302200 Page 9 of 9 Position E