2AOKB-A1618AAnker MagGo Power Bank (5K, 7.5W, Stand)

Anker Innovations Limited * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. The above contact person U.S. Agent Designation for Service of Process - Certification Attestation Letter 12/04/2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2AOKB-A1618A FRN of applicant: 0027073105 Per section 2.911(d)(7) of the FCC rules, Anker Innovations Limited (“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process: Company Name: Fantasia Trading LLC FCC Registration Number (FRN): 0033423005 Physical U.S. Company Address: 5350 Ontario Mills Pkwy, STE 100, Ontario, CA 91764, United States Contact Person: Connor Zhai Agent Email Address: [email protected] Tel.: (800) 988-7973 accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Agent Signed (if different from Applicant): Signed: Printed name: louis Qi Title: General Manager Company Name: Anker Innovations Limited Date: 12/04 Signed: Printed name: Connor Zhai Title: General Manager /2025 Company Name: Fantasia Trading LLC Date: 12/04/2025

Anker Innovations Limited Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2025-12-06 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AOKB-A1618A Anker Innovations Limited (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Anker Innovations Limited (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, Signed: Printed name: louis Qi Title: General Manager Company Name: Anker Innovations Limited Date:12/6/2025 Anker Innovations Limited Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2025-12-06 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AOKB-A1618A Anker Innovations Limited (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Signed: Printed name: louis Qi Title: General Manager Company Name: Anker Innovations Limited Date:12/6/2025

CustomerCodeVersi on EditDateContractor A32024.04.07Jinsheng IntelligenceCo., LTD Page 1 ShenZhenBlueTimesTechnologyCo.,LTD ACCESSORIESAPPROVALSHEET MANUFACTURERNAME：GuangdongJinshengintelligentCo.,Ltd PARTNAME:Coil SERIESNO.:Y.013.00166 USEDIN:6x0.08x72px11TSxG41.5-leadwirewith37mmdrivepipe APPROVED:2024.04.07 MANUFACTURERSIGNATUREAPPROVEDSIGNATURE TESTEDBYCHECKED BY APPROVED BY QAEDR&D TESTEDBYVERIFYTESTEDBYCHECKED BY APPROVED BY Address:5thFloor,BuildingB,TaixinglongIndustrialCity,Hezhou,XixiangTown,Bao'anDistrict,Shenzhen City,GuangdongProvince,China CustomerCodeVersi on EditDateContractor A32024.04.07Jinsheng IntelligenceCo., LTD Page 2 R&D Checkedby Checkedby ApprovedbyApprove dby TestedbyCheckedbyApprovedby XuesongHe Xiangyuan Yang WeiRu Tel：0755-2731903Fax：0755-88362530Website：www.ebluetimes.com GuangdongJinshengintelligentCo.,Ltd SPECIFICATIONFORAPPROVAL Customer ShenzhenLanzhiyangTechnologyCo.,Ltd. Materialdescription Coil ModelName 16x0.08x72px11TSxG41.5-leadwirewith37mmdrivepipe ApprovedNo. CustomerCode Date 2024.04.07 Productionmaterialnumber Version/Page A3 ThecontractorconfirmsUserconfirmation Thecustomerisrequiredtocompletetheproductinspectionwithin10daysafterreceivingthegoods,andnotifythesuppli eroftheinspectionresultsinwriting.Otherwise,itwillberegardedashavingpassedtheinspection. Contractor：GuangdongJinshengintelligentCo.,Ltd Address：BuildingB,2ndFloor,No.289,WenZhouRoad,DongchengDistrict,DongguanCity Tel：0769-22252827 CustomerCodeVersi on EditDateContractor A32024.04.07Jinsheng IntelligenceCo., LTD Page 3 E-mail:[email protected] GuangdongJinshengintelligentCo.,Ltd Modificationrecords No.Versio n DateThemodificationCharger 1A0 2022.09.15NewSpecification Confirmed Xuesong He 2A1 2023.03.25Thelengthofthetinhead changedfrom2plusor minus1to2plusorminus 1.5. Xuesong He 3 A2 2023.06.15Thelengthoftheleadwire changedfrom45to37. Xuesong He 4 A3 2024.04.07Thelengthoftheleadwire changedfromcrossingto non-crossing. Xuesong He CustomerCodeVersi on EditDateContractor A32024.04.07Jinsheng IntelligenceCo., LTD Page 4 GuangdongJinshengintelligentCo.,Ltd StructureSize 1.Demension: （Unit：mm） Note:Thecoilmustnotextendbeyondthemagneticplate.Thedefectrateofnon-crossingleadsshouldbecontrolledat3%. 2.Behaviourofelectricity（L）： Content Standard TestconditionTestDevice Remark Inductance1 6.3±5% 100KHZ,1VTH2817B+Magneticdisktesting DCR 65mΩMAX 100KHZ,1VTH2817B+Magneticdisktesting QValye50MIN100KHZ,1VTH2817B+Magneticdisktesting 3.AppearanceRequirement： 1)Theshapeandsizeoftheproductmustbestrictlycontrolled. 2)Thesurfaceoftheproductisfreeofoilstains,impurities,burrs,etc.3)Thematerialscannotbech angedwithouttheclient'sconfirmation. CustomerCodeVersi on EditDateContractor A32024.04.07Jinsheng IntelligenceCo., LTD Page 5 4)TheproductmustcomplywiththeROHS CustomerCodeVersi on EditDateContractor A32024.04.07Jinsheng IntelligenceCo., LTD Page 6 GuangdongJinshengintelligentCo.,Ltd MaterialList Billofmaterials numberMaterialname Description MaterialCode 1 Cables 0.08*72Photairtwistedwire 2 Magneticsheet G41x0.5HSlottedandperforated 3 Adhesiveplaster 3mmBrownishhotadhesivetape 4 Whiteglues Industrial-specificsiliconesealant 5 Gum 40.5*0.08H(Withholesandhandsfortearing) 6 Drivepipe 34*1.0ultrathin

Anker Innovations Limited Date：12/6/2025 Product Model Number: A1618 FCC ID：2AOKB-A1618A To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite Title: General Manager Email: [email protected] Telephone: +86-755-86544807 On behalf of: Anker Innovations Limited

Anker Innovations Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: December 6, 2025 Subject; Request for Confidentiality FCC ID: 2AOKB-A1618A To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: louis Qi Title: General Manager

7mm 6mm

- Page 1 of 9 - Report No.: HB20251112051E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com RF EXPOSURE Test Report Product: Anker MagGo Power Bank (5K, 7.5W, Stand) Trade Mark: ANKER Model Number: A1618 FCC ID: 2AOKB-A1618A Prepared for Anker Innovations Limited Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Central and Western District, Hong Kong Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 9 - Report No.: HB20251112051E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 5 2 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 6 2.1 TEST LABORATORY ..................................................................................................................................................... 6 2.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 6 2.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 6 2.4 TEST SOFTWARE ........................................................................................................................................................ 6 3 LIST OF TEST EQUIPMENT .................................................................................................................................. 7 4 RF EXPOSURE..................................................................................................................................................... 8 4.1 MAXIMUM PERMISSIBLE EXPOSURE .............................................................................................................................. 8 4.1.1. Limit ............................................................................................................................................................ 8 4.1.2. Test Procedures ........................................................................................................................................... 8 4.1.3. Test Setup .................................................................................................................................................... 8 4.1.4. Test Result ................................................................................................................................................... 9 - Page 3 of 9 - Report No.: HB20251112051E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Anker Innovations Limited Address ................................. : Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Central and Western District, Hong Kong Manufacturer's Name .......... : Anker Innovations Limited Address ................................. : Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Central and Western District, Hong Kong Product description Product name ........................ : Anker MagGo Power Bank (5K, 7.5W, Stand) Model Number ....................... : A1618 Standards ............................. : FCC CFR 47 PART 1 , 1.1310 Test procedure ....................... : KDB 680106 D01 Wireless Power Transfer v04 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ........................................... : Date (s) of performance of tests ............. : Nov. 12, 2025~Nov. 21, 2025 Test Result .............................................. : Pass Testing Engineer : ( Z o e Su) Technical Manager : (M i n g L i u) Authorized Signatory : (L e o S u) - Page 4 of 9 - Report No.: HB20251112051E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Revision History Revised No. Date of Issue Description 01 Nov. 21, 2025 Original - Page 5 of 9 - Report No.: HB20251112051E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongg…

Text truncated - open the document above for the full version.

Page 1 of 31 Report No. ESTE-R2511115 FCC PART 15C TEST REPORT FOR CERTIFICATION On Behalf of Anker Innovations Limited Anker MagGo Power Bank (5K, 7.5W, Stand) Model Number: A1618 FCC ID: 2AOKB-A1618A Applicant: Anker Innovations Limited Address: Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong Prepared By: EST Technology Co., Ltd. Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China Tel: 86-769-83081888-808 Report Number: ESTE-R2511115 Date of Test: Nov. 06, 2025 ~ Nov. 18, 2025 Date of Report: Nov. 19, 2025 Page 2 of 31 Report No. ESTE-R2511115 TABLE OF CONTENTS Description Page TEST REPORT VERIFICATION .......................................................................................................... 3 1. GENERAL INFORMATION ................................................................................................................ 4 1.1. Description of Device (EUT) ......................................................................................................... 4 2. SUMMARY OF TEST ........................................................................................................................ 5 2.1. Summary of test result .................................................................................................................. 5 2.2. Test Facilities .................................................................................................................................. 6 2.3. Measurement uncertainty ............................................................................................................. 7 2.4. Assistant equipment used for test ............................................................................................... 7 2.5. Block Diagram ................................................................................................................................ 7 2.6. The test mode was selected for the final test as listed below. ................................................ 8 2.7. Test Equipment List ....................................................................................................................... 9 3. RADIATED EMISSION ................................................................................................................... 10 3.1. Limit ................................................................................................................................................ 10 3.2. Test Setup ..................................................................................................................................... 11 3.3. Spectrum Analyzer Setting ......................................................................................................... 11 3.4. Test Procedure ............................................................................................................................. 12 3.5. Test Result .................................................................................................................................... 13 4. 20DB OCCUPIED BANDWIDTH .................................................................................................... 23 4.1. Limit ................................................................................................................................................ 23 4.2. Test Setup ..................................................................................................................................... 23 4.3. Spectrum Analyzer Setting ......................................................................................................... 23 4.4. Test Procedure ............................................................................................................................. 23 4.5. Test Condition .............................................................................................................................. 23 4.6. Test Result .................................................................................................................................... 24 5. AC POWER LINE CONDUCTED EMISSIONS ................................................................................. 26 5.1. Limit ................................................................................................................................................ 26 5.2. Test Setup ..................................................................................................................................... 26 5.3. Spectrum Analyzer Setting ......................................................................................................... 26 5.4. Test Procedure ............................................................................................................................. 26 5.5. Test Result .................................................................................................................................... 27 6. ANTENNA REQUIREMENTS .......................................................................................................... 29 6.1. Limit ................................................................................................................................................ 29 6.2. Test Result .................................................................................................................................... 29 7. TEST SETUP PHOTO .............................................................................................................. 30 8. EUT PHOTO .............................................................................................................................. 31 Page 4 of 31 Report No. ESTE-R2511115 1. GENERAL INFORMATION 1.1. Description of Device (EUT) Product Name : Anker MagGo Power Bank (5K, 7.5W, Stand) Model Number : A1618 Operation Frequency : 111kHz-205kHz Max Wireless Charge Power : 7.5W Max Field Strength of Fundamental : 65.93dBμV/m Modula…

Text truncated - open the document above for the full version.