2AOKB-A1780Anker 767 Portable Power Station(GaNPrime PowerHouse 2048Wh)

Product Number: A1780 51005003602 V02 @AnkerDeutschland @AnkerJapan @Anker @AnkerOcial @Anker_JP @anker_ocial @anker_jp For tutorial videos, FAQs, manuals, and more information, please visit: Or scan the QR code below: https://support.anker.com USER MANUAL Anker 767 Portable Power Station (GaNPrime PowerHouse 2048Wh) English 01-10 日本語 11-18 Français 19-28 EN 0201 EN What's in the Box Solar Charging Cable Anker 767 Portable Power Station AC Charging CableCar Charging Cable Accessories Bag Overview 11 10 1312 1415 9 8 7 Display Button AC Outlet Button IoT Button 10 Retractable Handle (Press the button on the retractable handle and pull to extend) Power Saving Button 11 Solar Input and Car Input Car Socket Button 12 Overcharge Protection USB Ports 13 AC Input Port Car Sockets 14 Wheel(s) TT-30R AC Output Port 15 Expansion Battery Port NEMA-20R AC Output Ports User Manual Recharging Your Power Station AC recharging (1440W Max) Recharge your power station by connecting to a wall outlet with the AC charging cable. Solar Panel Recharging (1000W Max) Recharge your power station with a maximum solar input of 1000W by connecting up to five Anker 531 Solar Panel (200W) as shown in the figure with a solar charging cable. Car Recharging Recharge your power station by connecting to a car's output port with the car charging cable. T · When your portable power station only has 1% battery remaining, the "Remaining Battery" indicator will flicker to remind you to recharge. EN 0403 EN Powering Your Devices Power Saving Mode Turning on the Power Saving mode prevents wasting energy as it automatically turns off the power station once all your devices are fully charged. Turning off the Power Saving mode will enable stable charging over an extended period, such as for time-lapse photography or when using a CPAP machine overnight. The AC outlets can intelligently identify whether a plug is inserted. This helps prevent power wastage by automatically turning off the power station if no plug is detected for more than 15 minutes, whether the Power Saving mode is turned on or off. AC Charging Press the AC outlet button and connect your devices to the AC output ports. on / o Press the AC outlet button and charge your RV via the TT-30R AC output ports. Please note that the max output of the AC outlet is 2400W, so do not power devices that are higher than 2400W. USB Charging Connect your devices to the USB ports. Car Socket Charging Turn on the car socket and connect your devices to start charging. on / o Uninterruptible Power Supply (UPS) To use the UPS feature, connect your power station to a wall outlet with the AC charging cable, then press the AC outlet button and connect your devices via the AC output ports. on Connect with an Expansion Battery Your power station can be connected with an expansion battery to double the capacity to 4096Wh. Please refer to the user manual of Anker 760 Portable Power Station Expansion Battery (2048Wh) for detailed instructions. The Anker App for Smart Control You can remotely control your power station using the Anker App. Please download the app and its user manual by scanning this QR code. Connect the device to a network before using the app for the first time. After connecting successfully, you can connect your devices off-grid. EN 0605 EN Light Ambient light Press the button once to turn on the ambient light, and press again up to 2 times to switch between brightness levels. x1 x2 x3 SOS Mode Press and hold the button for 2 seconds to turn on SOS mode. 2S SOS LCD Screen Guide 1 2 34567891011 12 13 1415 Current Output Power Current Input Power IoT Press the IoT button for 2 seconds and connect your devices through the app when this icon appears on the screen. Remaining Battery for Expansion Battery When the expansion battery is connected successfully, this icon appears on the screen. USB-A Output Port USB-C Output Port Car Charging AC Charge and Voltage Frequency Low-Temperature Alert When this icon shows, stop using the power station until the icon disappears. 10 High-Temperature Alert When this icon shows, stop using the power station and let it cool down until the icon disappears. 11 Overload Warning This icon appears when a port is overloaded. The port will be turned off to avoid any damage. Please remove the device causing overload. 12 Estimated Time to Fully Recharge 13 Estimated Time for Battery to Deplete 14 Remaining Battery for Power Station 15 Power Saving Mode FAQ Q1: What is the max power output of the AC output ports? The AC output ports can deliver a maximum of 2400W to connected devices. Q2: Can Anker 767 Portable Power Station power a CPAP machine? Yes, but make sure to turn off the Power Saving mode first. Q3: What should I do when using a solar charger to charge Anker 767 Portable Power Station? The solar input supports an 11-60V solar charger with an XT-60 connector. If you use an 11-32V solar charger, the current supports 10A max. When you use a 32-60V solar charger, the current supports 20A max. We recommend using Anker 531 Solar Panel (200W) to get the best compatibility. Q4: Can the USB-C ports be used to charge Anker 767 Portable Power Station (input only) or are they output only? The USB-C ports support output only. Q5: What should I do when AC recharging fails? If AC recharging does not work, check to see if the overload protection switch is switched on. If it is on, press down to reset and then continue recharging. Q6: How do I reset Anker 767 Portable Power Station? If your power station isn't working correctly, insert a paper clip or pin into the reset hole for 1 second for a factory reset. If the power station still doesn't work, please contact [email protected]. Q7: Why is the power station not working after it hasn't been used for a long time? If the power station is stored at a low capacity for a long time, lithium batteries will self-consume power which may lead to a quick discharge. This often leads to poor conductivity and a reduced batter…

Text truncated - open the document above for the full version.

Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Anker Innovations Limited Address Room 1318-19, Hollywood Plaza 610 Nathan Road, Mongkok, Kowloon, Hong Kong Grantee Code 2AOKB FCC ID 2AOKB-A1780 Authorized Contact Name Louis Qi Contact Email [email protected] Contact Phone +86-755-86544807 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List [Anker Innovations Limited] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Anker Innovations Limited] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: 05/30/2023 Print Name: Louis Qi Title: Compliance Manager

UNITED STATES DESIGNATED AGENT LETTER Date: 05/30/2023 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: Anker Innovations Limited Company Name: Fantasia Trading LLC Grantee Code: 2AOKB FRN: 0033423005 Contact Name: Louis Qi Contact Name: Louis Qi Address: Room 1318-19, Hollywood Plaza 610 Nathan Road, Mongkok, Address: 5350 Ontario Mills Pkwy, STE 100, Ontario, CA Ontario, CA 91764 United States City/Province/Zip: Kowloon, Hong Kong City/Province/Zip: 91764 Telephone: +86-755-86544807 Telephone: (800) 988-7973 Fax: N/A Fax: N/A Email: [email protected] Email: [email protected] Applicable Equipment: FCC ID: 2AOKB-A1780 ATTN: Director of Certification: We, Anker Innovations Limited and Fantasia Trading LLC understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, Anker Innovations Limited and Fantasia Trading LLC acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed): Louis Qi Name (Printed): Louis Qi Title: Compliance Manager Title: Compliance Manager Signature: Signature:

Anker Innovations Limited Date: 05/30/2023 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AOKB-A1780 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Anker Innovations Limited This authorization is valid until further written notice from the applicant. Sincerely, Print Name: Louis Qi Title: Compliance Manager Signature: On behalf of Company: Anker Innovations Limited Telephone: +86-755-86544807 E-mail: [email protected]

Anker Innovations Limited TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: 2AOKB-A1780 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 30 days from the grant date, whichever is less. If the device is marketed within confidential period, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Louis Qi Title: Compliance Manager Signature: On behalf of Company: Anker Innovations Limited Telephone: +86-755-86544807 E-mail: [email protected]

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 1 of 5 Appendix External Photos for SZCR2305001643AT FCC ID: 2AOKB-A1780 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 2 of 5 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 3 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 4 of 5 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A02 Rev.A/0 Page: 5 of 5 - End of the Appendix -

银色 深灰色（参考主机颜色） A1780 PC版 贴纸（US） 131.0 毫米 制作：dylan 日期：20221021 版本：V4.1 20220923修改内容 v4修改input贴纸尺寸 Anker 767 Portable Power Station (GaNPrime PowerHouse 2048Wh) Model: A1780 Rated Capacity: 51.2Vdc 40000mAh/2048Wh AC Input: 120V~ 12A Max, 60Hz AC Input Power (Charging): 1440W Max AC Input Power (Bypass Mode): 1440W Max XT60 Input: 11-32V⎓10A; 32V-60V⎓20A (1000W Max) USB-C Output: 5V⎓3A/ 9V⎓3A/ 15V⎓3A/ 20V⎓3A 20V⎓5A (100W Max Per Port) USB-A Output: 5V⎓2.4A ( 2.4A Max Per Port ) AC Output (Bypass Mode): 120V~ 12A Max, 50Hz/60Hz, 1440W Max AC Output (Inverter Mode): 120V~ 20A, 60Hz, 2400W Max Car Charger Output: 12V⎓10A Discharging Temperature: -4°F-104°F / -20°C-40°C Charging Temperature: 32°F-104°F / 0°C-40°C For use with Anker 760 Portable Power Station Expansion Battery (2048Wh) only Contains FCC ID: 2A6CI-DB809S Anker Innovations Limited I Made in China The device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2) this device must accept any interferences received, including interference that may cause undesired operation. CAUTION –This device is not waterproof. Use indoors if it is raining or the ground is wet outside. WARNING: DISCONNECT ALL SOURCES OF SUPPLY BEFORE SERVICING. 2AOKB-A1780 Label Location

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 1 of 7 Appendix Internal Photos for SZCR2305001643AT FCC ID: 2AOKB-A1780 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 2 of 7 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 3 of 7 Antenna SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 4 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 5 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 6 of 7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A03 Rev.A/0 Page: 7 of 7 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230500164302 Page: 1 of 11 Keny Xu EMC Laboratory Manager RF EXPOSURE EVALUATION REPORT Application No.: SZCR2305001643AT Applicant: Anker Innovations Limited Address of Applicant: Room 1318-19, Hollywood Plaza 610 Nathan Road, Mongkok, Kowloon, Hong Kong Manufacturer: Anker Innovations Limited Address of Manufacturer: Room 1318-19, Hollywood Plaza 610 Nathan Road, Mongkok, Kowloon, Hong Kong Equipment Under Test (EUT): EUT Name: Anker 767 Portable Power Station(GaNPrime PowerHouse 2048Wh) Model No.: A1780 Trade Mark: Anker FCC ID: 2AOKB-A1780 Standard(s) : FCC Rules 47 CFR §2.1091 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2023-05-26 Date of Evaluation: 2023-05-30 to 2023-06-10 Date of Issue: 2023-06-15 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230500164302 Page: 2 of 11 Revision Record Version Chapter Date Modifier Remark 01 2023-06-15 Original Authorized for issue by: Charlie Dai/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230500164302 Page: 3 of 11 2 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Contents .................................................................................................................................................... 3 3 General Information .................................................................................................................................. 4 3.1 General Description of E.U.T. ............................................................................................................ 4 3.2 Details of E.U.T. ................................................................................................................................. 4 3.3 Separation Distance ........................................................................................................................... 4 3.4 Test Location ...................................................................................................................................... 5 3.5 Test Facility ........................................................................................................................................ 5 3.6 Deviation from Standards ................................................................................................................... 5 3.7 Abnormalities from Standard Conditions ........................................................................................... 5 4 FCC Radiofrequency radiation exposure limits .................................................................................... 6 4.1 Blanket 1 mW Blanket Exemption ...................................................................................................... 6 4.2 MPE-based Exemption ...................................................................................................................... 6 4.3 SAR-based Exemption ....................................................................................................................... 7 5 Measurement and Calculation ............................................................................................................... 11 5.1 Maximum transmit power ................................................................................................................. 11 5.2 RF Exposure Calculation ................................................................................................................. 11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230500164302 Page: 4 of 11 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power supply: AC input 120V 60Hz Max. 12A Solar/ Car input: 11-32V 10A, 32-60V 20A 1000W Max. USB-C output: 5V/3A, 9V/3A, 15V/3A, 20V/3A, 20V/5A (100W Max Per Port). USB-A output: 5V/2.4A (2.4A Max. Per Port) AC output:120V 20A 60Hz 2400W Max. Car charger output: 12V/10A Max. Cable(s): AC cable 125cm unshielded Car input cable 314cm unshielded Solar input cable 50cm Operation Frequency: 2402MHz to 2480MHz Bluetooth Version: V5.0 LE Data Rate: 1Mbps Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: PCB Antenna Antenna Gain: 1.72dBi Remark: The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. 3.3 Separation Distance Minimum test separation distance: 20cm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230500164302 Page: 5 of 11 3.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 3.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited b…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230500164301 Page: 1 of 63 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2305001643AT Applicant: Anker Innovations Limited Address of Applicant: Room 1318-19, Hollywood Plaza 610 Nathan Road, Mongkok, Kowloon, Hong Kong Manufacturer: Anker Innovations Limited Address of Manufacturer: Room 1318-19, Hollywood Plaza 610 Nathan Road, Mongkok, Kowloon, Hong Kong Equipment Under Test (EUT): EUT Name: Anker 767 Portable Power Station(GaNPrime PowerHouse 2048Wh) Model No.: A1780 Trade Mark: Anker FCC ID: 2AOKB-A1780 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2023-05-26 Date of Test: 2023-05-30 to 2023-06-10 Date of Issue: 2023-06-15 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230500164301 Page: 2 of 63 Revision Record Version Chapter Date Modifier Remark 01 2023-06-15 Original Authorized for issue by: Charlie Dai/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230500164301 Page: 3 of 63 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Conducted Emissions at AC Power Line (150kHz-30MHz) 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Conducted Peak Output Power ANSI C63.10 (2013) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2013) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectrum Density ANSI C63.10 (2013) Section 11.10.2 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2013) Section 11.13.3.2 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2013) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Radiated Emissions which fall in the restricted bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/0 Aug01,2022 Report No.: SZCR230500164301 Page: 4 of 63 3 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Test Summary ........................................................................................................................................... 3 3 Contents .................................................................................................................................................... 4 4 General Information .................................................................................................................................. 6 4.1 Details of E.U.T. ................................................................................................................................. 6 4.2 Description of Support Units .............................................................................................................. 6 4.3 Measurement Uncertainty .................................................................................................................. 6 4.4 Test Location ...................................................................................................................................... 8 4.5 Test Facility ........................................................................................................................................ 8 4.6 Deviation from Standards ................................................................................................................... 8 4.7 Abnormalities from Standard Conditions ........................................................................................... 8 5 Equipment List .......................................................................................................................................... 9 6 Radio Spectrum Technical Requirement ............................................................................................. 12 6.1 Antenna Requirement ...................................................................................................................... 12 6.1.1 Test Requirement: ....................................................................................................................... 12 6.1.2 Conclusion ................................................................................................................................... 12 7 Radio Spectrum Matter Test Results .................................................................................................... 13 7.1 Conducted Emissions at AC Power Line (150kHz-30MHz) ............................................................. 13 7.1.1 E.U.T. Operation .......................................................................................................................... 13 7.1.2 Test Mode Description ................................................................................................................. 13 7.1.3 Test Setup Diagram ..................................................................................................................... 14 7.1.4 Measurement Procedure and Data................................................................…

Text truncated - open the document above for the full version.

DB809S BLE-Module PCB Antenna Specification 1. Antenna Description: Antenna plate Omni-directional Make name / Model name BOBLINKER / DB809S Antenna peak gain 1.72dBi Frequency range 2.402MHz ~2.480MHz Connect type Direct Connect Impedance 50 Ohm Antenna length 31.9mm Manufacture SHENZHEN DADOUTEK ELECTRONICS CO.,LTD 2. Picture of antenna 3. Passive Test For 2.4G Passive Test For 2.4G Fre（MHz） Effi（%） Gain（dBi） 2400 47.40 1.37 2450 49.60 1.29 2500 50.10 1.64 4. Antenna Radiation Pattern

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 1 of 3 Appendix Test Setup Photos for SZCR2305001643AT FCC ID: 2AOKB-A1780 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 2 of 3 Test Setup Photo Conducted Emissions at AC Power Line (150kHz-30MHz) Radiated Spurious Emissions Below 1GHz SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-A04 Rev.A/0 Page: 3 of 3 Radiated Spurious Emissions Above 1GHz - End of the Appendix -